Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering

Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2011) Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering. Advanced Engineering Materials, 13 (5). pp. 411-417. ISSN 1438-1656

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.1002/adem.201000367

Abstract

Metallic implants are known to have higher wear rates compared to ceramic. This causes more wear debris to be produced and results in the release of toxic metal ions to the surrounding areas. The strengthening mechanism in cobalt based cast orthopedic alloys depends upon carbides present in the microstructure, but these cause problems when dislodged between articulating surfaces, accelerating wear by abrasion and fretting. Thus, in order to improve the performance of these implants a novel method of processing the alloys, namely by spark plasma sintering (SPS) of fine powders, has been used as it generates hard oxides and not carbides in the microstructure. The oxide in the SPS processed alloy is identified as chromium oxide formed by a redox reaction between cobalt oxide found on the surface of cobalt particles and chromium. The oxygen associated with the cobalt powder is displaced and combines with the chromium during SPS. This oxide in the microstructure of the alloy can be more beneficial than carbides due to its higher hardness, resulting in lower wear rates and less wear particles. With the oxide in the microstructure, the hardness of the alloy becomes closer to that of ceramics. Also its lower density enables the alloy to be lighter. The chemical stability of the oxide ensures that it remains intact and due its insolubility in water, no carcinogenic or toxic reactions will occur.

Item Type: Article
Subjects: F200 Materials Science
H300 Mechanical Engineering
J700 Industrial Biotechnology
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Fawad Inam
Date Deposited: 23 May 2013 08:56
Last Modified: 10 Aug 2015 11:20
URI: http://nrl.northumbria.ac.uk/id/eprint/12652

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence