Performance comparisons of doubly-fed machines

Wu, Hao (2013) Performance comparisons of doubly-fed machines. Doctoral thesis, Northumbria University.

[img] PDF (PhD thesis)
wu.hao_phd.pdf - Accepted Version
Restricted to Repository staff only

Download (9MB)

Abstract

This research project aims at evaluating a conversion system based on the emerging Brushless Doubly Fed Reluctance Machine (BDFRM) through a comparative experimental study with a traditional and well established slip-ring counterpart, the Doubly Fed Induction Machine (DFIM). One of the main objectives is to establish whether this alternative machine is worthy of industrial consideration in variable
speed applications with limited speed ranges (e.g. wind turbines, pump-like drives etc.) in terms of control, reliability, efficiency and power factor performance as major criteria. Such kind of work has not been reported in the open-literature to date and represents the main contribution of the project being undertaken.

A conventional and widely used parameter-independent vector control (VC) scheme has been selected for the operation of both the machines using a shaft-position sensor. The VC algorithm has been simulated and implemented in real-time on state-of-the-art eZdsp development platform based on the TMS320F28335 Digital Signal Controller (DSC). The control code has been derived from a programme written in C++ using the corresponding compiler, the Code Composer Studio (CCS). Comprehensive computer simulations have been done in Matlab/Simulink using the parameters obtained by off-line testing of the DFIM and BDFRM prototypes, which have been built in the same stator frame for comparison purposes. The simulation results have been experimentally verified on two identical test rigs where a commercial 4-quadrant cage induction machine V/f drive has been used as a prime mover or load for either the DFIM or the BDFRM subject to their operating mode.

The preliminary experimental results on two small-scale prototypes have shown that the BDFRM can achieve competitive performance to the similarly rated DFIM and as such should warrant further investigation and increasing interests of both academic and industrial communities as a potential large-scale wind generator or a pump drive.

Item Type: Thesis (Doctoral)
Subjects: H600 Electronic and Electrical Engineering
Department: Faculties > Engineering and Environment > Mathematics, Physics and Electrical Engineering
University Services > Graduate School > Doctor of Philosophy
Related URLs:
Depositing User: Ellen Cole
Date Deposited: 08 Aug 2013 12:07
Last Modified: 31 Jul 2021 23:38
URI: http://nrl.northumbria.ac.uk/id/eprint/13337

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics