Performance of dove tailed synthetic fibres in concrete

Richardson, Alan, Coventry, Kathryn and Boussoffara, Riyadh (2013) Performance of dove tailed synthetic fibres in concrete. Emerging Materials Research, 3 (1). pp. 52-66. ISSN 2046-0147

[img] Microsoft Word (Performance of dove tailed synthetic fibres in concrete)
Bond_strength_Final_journal.doc - Accepted Version

Download (2MB)
Official URL: http://dx.doi.org/10.1680/emr.13.00040

Abstract

This research investigated the bond strength and toughness of a range of widely used commercially available synthetic Type 2 structural fibres defined within BS EN 14889 [1] and compared these against novel prototype dove tailed (DT) synthetic Type 2 structural fibres. The dove tail shapes are three in number when viewed across the diameter of the circular DT fibre and they run longitudinally, creating an open flute effect. Synthetic fibres tend to be made from low modulus materials when compared to steel crack control products and they suffer a greater diameter reduction and increase in length when compared to steel; for an equal load. Diameter reduction of fibres in concrete causes de-bonding and eventual failure. DT fibres are designed to offer additional bond when a diameter reduction occurs under load. Fibres were cast into concrete cubes to a depth of half their length and pulled out recording load and extension to ultimate failure. The findings showed large degrees of toughness were available when using dove tailed fibre technology, The DT fibres transferred less bond stress at the point of the initial pull out prior to the dove tailed feature of the fibre taking effect. The dovetailed fibre under test provided additional grip through the contraction of the internal faces of the dovetail features when under load. Further work is needed to determine the optimum DT fibre diameter and aspect ratio that may provide increased bond stress whilst retaining large degrees of toughness.

Item Type: Article
Uncontrolled Keywords: bond stress, synthetic fiber, toughness, dovetail fiber, mechanical properties, composite materials, materials science
Subjects: F200 Materials Science
H200 Civil Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Alan Richardson
Date Deposited: 13 Dec 2013 11:15
Last Modified: 10 Aug 2015 11:07
URI: http://nrl.northumbria.ac.uk/id/eprint/14790

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence