A novel method of production of CdS/CdTe thin film solar cells

Bhatti, Muhammad Tariq (1993) A novel method of production of CdS/CdTe thin film solar cells. Doctoral thesis, University of Northumbria at Newcastle.

[img]
Preview
Text (PhD thesis)
356984.pdf - Submitted Version

Download (13MB) | Preview

Abstract

Thin films of CdTe have been produced using stacked elemental layer (S. E. L. ) processing. This method consists of depositing alternate layers of the elements (Cd and Te in this case) followed by an anneal to react them to form CdTe. The layers were deposited using vacuum evaporation and the deposition conditions optimised so that uniform layers with controllable thicknesses produced. The CdTe was synthesised by annealing in air, vacuum and nitrogen environments and the crystal structure, crystallinity, surface morphology, optical, electrical properties of the layers related to the fabrication conditions.
An anneal at 450C for 15 minutes was found to be optimum for fully synthesising the CdTe without degrading the optical properties of the layers. All the layers synthesised had the sphalerite crystal structure. The layers synthesized in nitrogen and vacuum environments consisted of small randomly oriented grains (~1000 A
in diameter) whereas the layers synthesized in air consisted of slightly larger grains.
X-ray diffraction data for the latter layers however indicated that CdTe03 was present as a second phase material and hence the layers synthesised in nitrogen or
vacuum were preferred.
It was found that annealing the CdTe layers after dipping them into a solution of CdC12 in methanol recrystallised the CdTe so that the layers now consisted of large columnar grains. This annealing treatment also converted the as synthesized layers from n-type to p-type with net acceptor concentration ~10e15 - 1Oe16 cm3.
Solar cells made using the recrystallised layers had efficiencies ~ 2% (Vo.c. ~ 680mV, Js.c. ~ 11mA/cm2 and
F.F. ~ 0.35)
The solar cells were fully characterised and detailed measurements indicate that the quality of the CdTe and its interface with CdS are good. The efficiency is limited by the series resistance of the device and further work to reduce the contact resistance resistance to the CdTe and the bulk resistances of the CdS and CdTe should improve both Js.c. and the F.F. to improve the device efficiency to > 10%.

Item Type: Thesis (Doctoral)
Additional Information: Thesis digitised by the British Library e-thesis online service, EThOS.
Subjects: H600 Electronic and Electrical Engineering
Department: University Services > Graduate School > Doctor of Philosophy
Depositing User: Ellen Cole
Date Deposited: 25 Oct 2019 15:07
Last Modified: 25 Oct 2019 16:10
URI: http://nrl.northumbria.ac.uk/id/eprint/15719

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence