Optimal design of wind turbine blades equipped with flaps

Wiratama, I. Kade and Maheri, Alireza (2014) Optimal design of wind turbine blades equipped with flaps. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1511-1515. ISSN 1819-6608

[img]
Preview
PDF (Open access article)
jeas_0914_1210.pdf - Published Version

Download (247kB) | Preview
Official URL: http://www.arpnjournals.com/jeas/volume_09_2014.ht...

Abstract

As a result of the significant growth of wind turbines in size, blade load control has become the main challenge for large wind turbines. Many advanced techniques have been investigated aiming at developing control devices to ease blade loading. Amongst them, trailing edge flaps have been proven as effective devices for load alleviation. The present study aims at investigating the potential benefits of flaps in enhancing the energy capture capabilities rather than blade load alleviation. A software tool is especially developed for the aerodynamic simulation of wind turbines utilising blades equipped with flaps. As part of the aerodynamic simulation of these wind turbines, the control system must be also simulated. The simulation of the control system is carried out via solving an optimisation problem which gives the best value for the controlling parameter at each wind turbine run condition. Developing a genetic algorithm optimisation tool which is especially designed for wind turbine blades and integrating it with the aerodynamic performance evaluator, a design optimisation tool for blades equipped with flaps is constructed. The design optimisation tool is employed to carry out design case studies. The results of design case studies on wind turbine AWT-27 (Aerodynamic Wind Turbine-27) reveal that, as expected, the location of flap is a key parameter influencing the amount of improvement in the power extraction. The best location for placing a flap is at about 70% of the blade span from the root of the blade. The size of the flap has also significant effect on the amount of enhancement in the average power. This effect, however, reduces dramatically as the size increases. For constant speed rotors, adding flaps without re-designing the topology of the blade can improve the power extraction capability as high as of about 5%. However, with re-designing the blade pretwist the overall improvement can be reached as high as 12%.

Item Type: Article
Additional Information: Open access journal.
Subjects: H100 General Engineering
H300 Mechanical Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Ay Okpokam
Date Deposited: 10 Oct 2014 13:38
Last Modified: 29 Jan 2016 19:16
URI: http://nrl.northumbria.ac.uk/id/eprint/17714

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence