Simulation of the intermittent cutting action of a bandsaw blade

Sarwar, Mohammed, Hellbergh, Hakan, Doraisingam, Anand Raj and Persson, Martin (2002) Simulation of the intermittent cutting action of a bandsaw blade. Technical Report. Society of Manufacturing Engineers.

Full text not available from this repository. (Request a copy)

Abstract

Bandsawing is fast becoming the most preferred procedure for cutting-off standard workpieces owing to low kerf loss and high metal removal rates. One of the primary problems in evaluating metal bandsaws and developing newer variants, comprising of new saw tooth materials, their heat treatment, or different tooth forms and quality, has been costly and time consuming sawing tests. In order to overcome this, simulation work using a Single tooth test method previously developed was tested and validated. Cutting tests were performed at fine depths of cut (2-10 μm) usually found in actual bandsawing process.

Item Type: Report (Technical Report)
Additional Information: Number: MR02-271
Uncontrolled Keywords: Bandsaw blade, cutting, cutting tool, machines, machining, metal sawing
Subjects: J500 Materials Technology not otherwise specified
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Becky Skoyles
Date Deposited: 12 Feb 2015 14:54
Last Modified: 10 Aug 2015 11:38
URI: http://nrl.northumbria.ac.uk/id/eprint/19424

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence