Performance evaluation of bandsaw using scientific method when cutting tool steels

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2012) Performance evaluation of bandsaw using scientific method when cutting tool steels. In: Proceedings of the 37th International Matador Conference. Springer, London, pp. 209-212.

Full text not available from this repository. (Request a copy)

Abstract

Bandsawing is a key primary machining operation for cutting off raw material into required dimensions, which is subjected to further secondary machining operation(s) to manufacture a product or a component. Bandsawing is distinctively characterised from other multipoint cutting operations with small depth of cut or feed per tooth (5 μm - 50 μm) compared to the cutting edge radius (5 μm - 15 μm). Bandsawing performance significantly differs depending on workpiece material characteristics. In the current investigation, performance of bandsawing operation has been scientifically evaluated when cutting two different tool steel materials (Orvar Supreme and Sverker). Bandsawing tests were carried out with 6 different cutting speeds ranging from 31 m/min to 90 m/min and four different depths of cut ranging from 1 μm to 4 μm. Cutting forces and thrust forces were continuously measured throughout the cutting tests. Specific cutting energy parameter calculated based on cutting force and material removal data has been used to quantitatively measure the efficiency of the metal cutting process at different feeds and speeds. The bandsaw teeth at the worn condition have been studied under a Scanning Electron Microscope to identify wear modes and mechanisms. The chip characteristics at different feeds and speeds have also been discussed. The sawing community including bandsaw end users and design engineers should find the results presented of interest.

Item Type: Book Section
Uncontrolled Keywords: Bandsawing, bimetal bandsaw, cutting force, specific cutting energy, tool steel, wear
Subjects: H300 Mechanical Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Becky Skoyles
Date Deposited: 15 Jan 2015 15:55
Last Modified: 10 Nov 2016 12:40
URI: http://nrl.northumbria.ac.uk/id/eprint/20992

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence