Friction and wear behaviour of carbon nitride films deposited on plasma nitrided Ti–6Al–4V

Fu, Yong Qing, Loh, Nee Lam, Wei, Jun, Yan, Bibo and Hing, Peter (2000) Friction and wear behaviour of carbon nitride films deposited on plasma nitrided Ti–6Al–4V. Wear, 237 (1). pp. 12-19. ISSN 0043 1648

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.1016/S0043-1648(99)00313-0

Abstract

Amorphous carbon nitride (CNx) films were deposited on plasma nitrided Ti–6Al–4V substrate in order to improve the adhesion strength and tribological behaviour. Scratch and ball-on-disk wear tests were performed to evaluate the load bearing capacity, wear and friction characteristics of the duplex-treated coatings. Compared with a CNx film deposited on Ti–6Al–4V substrate, the load bearing capacity of a CNx film deposited on plasma nitrided layer was improved dramatically. Results showed that under dry sliding condition, the duplex-treated system was more effective in maintaining a favourable low and stable coefficient of friction and improving the wear resistance than both individual plasma nitriding and CNx film on Ti–6Al–4V substrate. The reasons for this significant improvement in tribological behaviour with the application of duplex treatment can be attributed to the combined benefits from both plasma nitriding and CNx films. (1) Plasma nitriding of Ti–6Al–4V produces a graded hardened case which serves as an excellent supporting and load bearing layer for hard CNx films. (2) The CNx film deposited at low temperature can produce a wear resistant and low-friction surface without impairing the beneficial effects from plasma nitriding treatment, and the smooth CNx films could effectively reduce both the interfacial stresses and the stresses near the surface thus providing a good tribological behaviour. (3) The graphitisation of the wear debris during dry sliding condition can help to decrease the coefficient of friction and improve the wear resistance.

Item Type: Article
Uncontrolled Keywords: Amorphous carbon nitride, Ti–6Al–4V, duplex treatment, plasma nitriding, tribology, adhesion strength
Subjects: F200 Materials Science
Department: Faculties > Engineering and Environment > Physics and Electrical Engineering
Depositing User: Becky Skoyles
Date Deposited: 24 Mar 2015 15:13
Last Modified: 10 Aug 2015 11:39
URI: http://nrl.northumbria.ac.uk/id/eprint/21762

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence