Duplex surface treatments of light alloys

Fu, Yong Qing (2010) Duplex surface treatments of light alloys. In: Surface Engineering of Light Alloys Aluminium: Magnesium and Titanium Alloys. Woodhead Publishing Series in Metals and Surface Engineering . Woodhead Publishing, Boca Raton, pp. 501-545. ISBN 9781845695378

Full text not available from this repository. (Request a copy)

Abstract

Duplex or hybrid surface engineering is the sequential application of two (or more) established surface technologies to produce a surface composite with combined properties which are unobtainable through any individual surface technology. Low friction coatings such as DLC, nitrides and oxides can be used as the top coating layer, which can not only increase wear resistance but also diminish interfacial shear stress and strain, and reduce the tendency for debonding of top coatings. A deep case-hardened layer can be used as the bottom layer, which can significantly enhance the load-bearing capacity and improve the coating/film adhesion. In this chapter, the mechanisms, potential techniques, and applications of the duplex and hybrid treatments of titanium and aluminium alloys have been summarized.

Item Type:	Book Section
Uncontrolled Keywords:	duplex treatment, load bearing capacity,adhesion, hard coating, case hardening, Ti alloys, Al alloys
Subjects:	F200 Materials Science
Department:	Faculties > Engineering and Environment > Mathematics, Physics and Electrical Engineering
Depositing User:	Ay Okpokam
Date Deposited:	25 Mar 2015 14:11
Last Modified:	12 Oct 2019 19:06
URI:	http://nrl.northumbria.ac.uk/id/eprint/21779

Downloads