Wear and failure modes in the bandsawing operation when cutting ball-bearing steel

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2005) Wear and failure modes in the bandsawing operation when cutting ball-bearing steel. Wear, 259 (7-12). pp. 1144-1150. ISSN 0043-1648

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.1016/j.wear.2005.01.032

Abstract

Bandsawing is an important operation in a variety of industries particularly steel suppliers, which need to cut-off raw material for secondary processes. Bandsawing is becoming a more competitive and preferred method of cuttingoff to size as compared to circular sawing as the former achieves a lower kerf width, high metal removal rates and good surface finish. One specific feature of the bandsaw metal-cutting operation is that the depth of cut per cutting edge is small (5?50?m). Under these conditions of low depth of cut compared to the edge sharpness, metal removal takes place by a complex combination of chip formation mechanisms. In order to have a better understanding of the fundamental nature of the chip formation mechanisms, full blade samples have been examined and the characteristic features associated with wear and failure modes are reported. This information will be useful for the future development of bandsaw materials enhancing the performance and life in a very important manufacturing industry. The work presented here is a combination of industrial interest and a scientific study by academia.

Item Type: Article
Additional Information: Industrially supported by Industry (SNA-Europe, Sweden). Co-authors are industrialist, one of whom carried out their PhD research at Northumbria University. Innovatory investigation of Bi-metal tooth strip. Innovatory test evaluation system. Parallel studies in Industry and University led to cementing of Industry/academic collaborative research. Technology transfer by organised Training for Industry (SNA-Europe, Sweden). Total collaborative research had led to over £250k investment from Industry (SNA-Europe, Sweden).
Uncontrolled Keywords: Steel ball bearings, Sawing, Machine-tools
Subjects: H700 Production and Manufacturing Engineering
H900 Others in Engineering
Department: Faculties > Engineering and Environment > Physics and Electrical Engineering
Depositing User: EPrints Services
Date Deposited: 27 Nov 2008 14:29
Last Modified: 10 Aug 2015 11:35
URI: http://nrl.northumbria.ac.uk/id/eprint/2767

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence