Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid

Gariani, Salah, Shyha, Islam, Jackson, Connor and Inam, Fawad (2017) Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid. In: Manufacturing Sciences and Technologies VII. Materials Science Forum (882). Trans Tech Publications, pp. 36-40. ISBN 9783038357322

Full text not available from this repository.
Official URL: http://www.ttp.net/978-3-03835-732-2.html

Abstract

This paper details experimental results when turning Ti-6Al-4V using water-miscible vegetable oil-based cutting fluid. The effects of coolant concentration and working conditions on tool flank wear and tool life were evaluated. L27 fractional factorial Taguchi array was employed. Tool wear (VBB) ranged between 28.8 and 110 μm. The study concluded that a combination of VOs based cutting fluid concentration (10%), low cutting speed (58 m/min), feed rate (0.1mm/rev) and depth of cut (0.75mm) is necessary to minimise VBB. Additionally, it is noted that tool wear was significantly affected by cutting speeds. ANOVA results showed that the cutting fluid concentration is statistically insignificant on tool flank wear. A notable increase in tool life (TL) was recorded when a lower cutting speed was used.

Item Type: Book Section
Uncontrolled Keywords: Cutting Fluids (CFs), Ti-6Al-4V, Turning, Vegetable Oils (VOs)
Subjects: H300 Mechanical Engineering
H700 Production and Manufacturing Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Islam Shyha
Date Deposited: 30 Nov 2016 10:43
Last Modified: 20 Jan 2017 10:00
URI: http://nrl.northumbria.ac.uk/id/eprint/28697

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence