Formation Mechanism and Cohesive Energy Analysis of Metal-coated Graphene Nanocomposites Using In-situ Co-reduction Method

Xue, Yuanlin, Chen, Wenge, Wang, Jiaojiao, Dong, Longlong, Zhao, Qian and Fu, Yong Qing (2018) Formation Mechanism and Cohesive Energy Analysis of Metal-coated Graphene Nanocomposites Using In-situ Co-reduction Method. Materials, 11 (11). p. 2071. ISSN 1996-1944

[img]
Preview
Text
materials-11-02071.pdf - Published Version
Available under License Creative Commons Attribution 4.0.

Download (7MB) | Preview
[img]
Preview
Text (Full text)
Xue et al - Formation Mechanism and Cohesive Energy Analysis of Metal-coated Graphene Nanocomposites AAM.pdf - Accepted Version
Available under License Creative Commons Attribution 4.0.

Download (1MB) | Preview
Official URL: https://doi.org/10.3390/ma11112071

Abstract

Abstract: Nanocomposite powders based on metal-coated graphene were synthesized using an in-situ co-reduction method in order to improve wettability and interfacial bonding between graphene and metal. Graphene oxide (GO) of 2~3 atomic layers was synthesized using the Hummer’s method with graphite as a raw material, and then dispersed into a dispersing agent solution mixed with N-Methyl pyrrolidone and deionized water to form a homogeneous GO suspension, which was finally added into electroless plating solutions for the reduction process. Copper-coated graphene (Cu@graphene) and nickel-coated graphene (Ni@graphene) were synthesized using this one-step and co-reduction method by mixing salt solutions containing metal ions and GOs into the plating solution. The copper ions or nickel ions were adsorbed and bonded onto the edges and surfaces of graphene, which was reduced from the GOs using a strong reducing agent of ascorbic acid or sodium borohydride. Crystalline copper particles with an average size of about 200 nm were formed on the surface of graphene, whereas amorphous or nanocrystalline nickel particles with an average size of 55 nm were formed on the surface of graphene. Distribution of these metal particles on the graphene is homogeneous and highly dispersed, which can effectively improve the sinterability of composite powders. Cohesive energy distribution between graphene and metal interface was analyzed using first-principle calculation method. Formation mechanism of metal coated graphene was identified to be that both the GO and metal ions were simultaneously reduced in the reducing agents, and thus a strong chemical bonding of graphene/metal was formed between the metal particles and graphene.

Item Type: Article
Uncontrolled Keywords: graphene, coated metals, preparation, characterization, mechanisms
Subjects: F200 Materials Science
H600 Electronic and Electrical Engineering
Department: Faculties > Engineering and Environment > Mathematics, Physics and Electrical Engineering
Depositing User: Paul Burns
Date Deposited: 17 Oct 2018 14:03
Last Modified: 11 Dec 2018 09:46
URI: http://nrl.northumbria.ac.uk/id/eprint/36351

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence