Integrated sensing layer of bacterial cellulose and polyethyleneimine to achieve high sensitivity of ST-cut quartz surface acoustic wave formaldehyde gas sensor

Wang, J. L., Guo, Yuanjun, Long, G.D., Tang, Yong Liang, Tang, Q.B., Zu, Xiao-Tao, Ma, J.Y., Du, B., Torun, Hamdi and Fu, Richard (2020) Integrated sensing layer of bacterial cellulose and polyethyleneimine to achieve high sensitivity of ST-cut quartz surface acoustic wave formaldehyde gas sensor. Journal of Hazardous Materials, 388. p. 121743. ISSN 0304-3894

[img]
Preview
Text
J_Hazard_Mater_final_version.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives 4.0.

Download (1MB) | Preview
Official URL: https://doi.org/10.1016/j.jhazmat.2019.121743

Abstract

Surface acoustic wave (SAW)-based formaldehyde gas sensor using bi-layer nanofilms of bacterial cellulose (BC) and polyethyleneimine (PEI) was developed on an ST-cut quartz substrate using sol-gel and spin coating processes. BC nanofilms significantly improve the sensitivity of PEI films to formaldehyde gas, and reduces response and recovery times. The BC films have superfine filamentary and fibrous network structures, which provide a large number of attachment sites for the PEI particles. Measurement results obtained using in situ diffuse reflectance Fourier transform infrared spectroscopy showed that the primary amino groups of PEI strongly adsorb formaldehyde molecules through nucleophilic reactions, thus resulting in a negative frequency shift of the SAW sensor due to the mass loading effect. In addition, experimental results showed that the frequency shifts of the SAW devices are determined by thickness of PEI film, concentration of formaldehyde and relative humidity. The PEI/BC sensor coated with three layers of PEI as the sensing layer showed the optimal sensing performance, which had a frequency shift of 35.6 kHz for 10 ppm formaldehyde gas, measured at room temperature and 30 % RH. The sensor also showed good selectivity and stability, with a low limit of detection down to 100 ppb.

Item Type: Article
Uncontrolled Keywords: Polyethyleneimine (PEI), Bacterial cellulose (BC), SAW sensor, formaldehyde gas, bi-layer nanofilms
Subjects: F200 Materials Science
Department: Faculties > Engineering and Environment > Mathematics, Physics and Electrical Engineering
Depositing User: Elena Carlaw
Date Deposited: 26 Nov 2019 11:37
Last Modified: 31 Jul 2021 13:50
URI: http://nrl.northumbria.ac.uk/id/eprint/41604

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics