Mass sensitivity of acoustic wave devices from group and phase velocity measurements

McHale, Glen, Martin, Fabrice and Newton, Michael (2002) Mass sensitivity of acoustic wave devices from group and phase velocity measurements. Journal of Applied Physics, 92 (6). pp. 3368-3373. ISSN 0021-8979

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.1063/1.1499750

Abstract

The effect of dispersion on acoustic wave sensors is considered. The discussion is focused upon layer guided surface acoustic waves (Love waves), which obtain their high mass sensitivity for the first Love wave mode by optimizing the guiding layer thickness, d, such that dsimilar tolambda(l)/4; the wavelength in the layer is given by lambda(l)=f/v(l) where f is the operating frequency and v(l) is the shear acoustic speed of the guiding layer. We show that this optimization of guiding layer thickness corresponds to strong dispersion so that the phase and group velocities can be quite different. From the definition of the phase velocity mass sensitivity, we show that it can be determined from either the slope of the curve of phase velocity with normalized guiding layer thickness, z=d/lambda(l), or from the phase and group velocities measured for a given guiding layer thickness. Experimental data for a poly(methylmethacrylate) polymer guiding layer on 36degrees XY Lithium Tantalate is presented. Measurements of phase velocity and group velocity determined by a network analyzer were obtained for systematically increasing guiding layer thicknesses; a pulse transit experiment was also used to provide independent confirmation of the group velocity data. Two independent estimates of the mass sensitivity are obtained for z=d/lambda(l)<0.22 from (i) the slope of the phase velocity curve and (ii) the measurements of the group and phase velocity. These two estimates are shown to be consistent and we, therefore, conclude that it is possible to determine the mass sensitivity for a Love wave device with a given guiding layer thickness from measurements of the phase and group velocities. Moreover, we argue that the formula using group velocity to determine phase velocity mass sensitivity can be extended to a wide range of other acoustic wave sensors. In addition, we suggest that variations in the group velocity due to deposited mass may be a more sensitive parameter than variations in the phase velocity.

Item Type: Article
Uncontrolled Keywords: Love wave, shear wave, sensor
Subjects: F300 Physics
H600 Electronic and Electrical Engineering
Department: Faculties > Engineering and Environment > Mathematics, Physics and Electrical Engineering
Depositing User: Glen McHale
Date Deposited: 29 Aug 2012 15:23
Last Modified: 24 Oct 2017 08:55
URI: http://nrl.northumbria.ac.uk/id/eprint/8354

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence