Items where Author is "Agnew, Brian"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 34.

Article

Ameli, Masoud, Agnew, Brian, Leung, Pak Sing, Ng, Bobo, Sutcliffe, C. J., Singh, J. and McGlen, R. J. (2013) A novel method for manufacturing sintered aluminium heat pipes (SAHP). Applied Thermal Engineering, 52 (2). pp. 498-504. ISSN 1359-4311

Aneke, Mathew, Agnew, Brian, Underwood, Chris and Masheiti, Salah (2012) Power generation from waste heat in a food processing application. Applied Thermal Engineering, 36. pp. 171-180. ISSN 1359-4311

Masheiti, Salah, Agnew, Brian, Talbi, M., Atan, R. and Walker, Sara (2012) Environmental and thermal benefits of combining Brayton, absorption refrigeration and organic rankine cycles with a low-enthalpy geothermal source at an arid zone of Libya. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226 (4). pp. 545-555. ISSN 0957-6509

Pflitsch, Andreas, Brüne, Markus, Killing-Heinze, M. and Agnew, Brian (2012) Natural airflow can turn escape routes of subway stations into death traps. Science, n/a (n/a). n/a. ISSN 1095-9203 (Submitted)

Pflitsch, Andreas, Brüne, Markus, Steiling, B., Agnew, Brian, Killing-Heinze, M., Irving, M. and Lockhart, J. (2012) Air flow measurements in the underground section of a UK light rail system. Applied Thermal Engineering, 32. pp. 22-30. ISSN 1359-4311

Walker, Sara, Agnew, Brian, Masheiti, Salah and Talbi, M. (2012) Economical evaluation of a low-enthalpy geothermal resource located in an arid-zone area. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 6 (7). pp. 1013-1021. ISSN 1934-8975

Aneke, Mathew, Agnew, Brian and Underwood, Chris (2011) Performance analysis of the Chena binary geothermal power plant. Applied Thermal Engineering, 31 (10). pp. 1825-1832. ISSN 1873-5606

Aneke, Mathew, Agnew, Brian, Underwood, Chris and Menkiti, Matthew (2011) Thermodynamic analysis of alternative refrigeration cycles driven from waste heat in a food processing application. International Journal of Refrigeration, 35 (5). pp. 1349-1358. ISSN 0140-7007

Shi, Xiaojun, Che, Defu and Agnew, Brian (2011) An investigation of the performance of compact heat exchangers for latent heat recovery from exhaust flue gases. International Journal of Heat and Mass Transfer, 54 (1-3). pp. 606-615. ISSN 0017-9310

Aneke, Mathew, Agnew, Brian and Underwood, Chris (2011) Approximate analysis of the economic advantage of a dual source ORC system over two single ORC systems in the conversion of dual low and mid grade heat energy to electricity. Journal of EUEC, 5. pp. 2-17. ISSN 1941-9848

Tassou, S., Karayiannis, T., Agnew, Brian, Harvey, A. and Reay, D. (2011) Process energy recovery: getting the system right. UK Power and Process Engineering, 5. (In Press)

Makhdoum, Basim M. A. and Agnew, Brian (2011) An energy and exergy analysis of a microturbine CHP system. Journal of Environmental Science and Engineering, 5 (4). pp. 508-518. ISSN 1934-8932

Masheiti, Salah, Agnew, Brian and Walker, Sara (2011) An evaluation of the use of R134a and R245fa as the working fluid in an organic Rankine Cycle energized from a low temperature geothermal energy source. Journal of Energy and Power Engineering, 5 (5). pp. 392-402. ISSN 1359-4311

Masheiti, Salah and Agnew, Brian (2010) Thermodynamic Simulation Modelling of Low Temperature Geothermal Source Located in Arid-Zone Areas of North Africa. Jordan Journal of Mechanical and Industrial Engineering, 4 (1). pp. 61-68. ISSN 1995-6665

Shi, Xiaojun, Agnew, Brian and Che, Defu (2010) Analysis of a combined cycle power plant integrated with a liquid natural gas gasification and power generation system. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 223 (1). pp. 1-11. ISSN 0957-6509

Agnew, Brian, Aliyu, B. and Shitanda, Douglas (2010) Croton Megalocarpus (Musine) seeds as a potential source of bio-diesel. Biomass & Bioenergy, 34 (10). pp. 1495-1499. ISSN 0961-9534

Aliyu, B., Shitanda, Douglas, Walker, Sara, Agnew, Brian, Masheiti, Salah and Atan, R. (2010) Performance and exhaust emissions of a diesel engine fuelled with Croton megalocarpus (musine) methyl ester. Applied Thermal Engineering, 31 (1). pp. 36-41. ISSN 1359-4311

Shi, Xiaojun, Agnew, Brian, Che, Defu and Gao, Jianmin (2010) Performance enhancement of conventional combined cycle power plant by inlet air cooling, intercooling and LNG cold energy utilisation. Applied Thermal Engineering, 30 (14-15). pp. 2003-2010. ISSN 1359-4311

Masheiti, Salah and Agnew, Brian (2010) The influence of coolant temperature on various cycle parameters of single effect LiBr-H20 absorption chillers when energised from a low temperature heat source. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 224 (7). pp. 947-955. ISSN 0957-6509

Book Section

Davies, Gareth F., Eames, Ian W., Maidment, Graeme G., Janiszewski, Adam, Agnew, Brian, Bailey, Paul B., Dadd, Michael W. and Stone, C. Richard (2010) Cooling microprocessors using vapour compression refrigeration. In: Proceedings of the 12th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm). Institute of Electrical and Electronics Engineers (IEEE), Piscataway, N. J., USA, pp. 1-8. ISBN 9781424453429

Davies, Gareth F., Eames, Ian W., Bailey, Paul B., Dadd, Michael W., Janiszewski, Adam, Stone, C. Richard, Maidment, Graeme G. and Agnew, Brian (2010) Development of miniature vapour compression refrigeration systems from electronic cooling. In: Proceedings of the ASME interpack conference 2009. ASME, New York , pp. 399-408. ISBN 9780791843604

Monograph

Sazalli, Saiful, Greenwood, David and Agnew, Brian (2012) Towards adoption of the industrialised building construction in Malaysia. Project Report. Northumbria University, Newcastle-upon-Tyne.

Conference or Workshop Item

Ameli, Masoud, Agnew, Brian, Ng, Bobo, McGlen, R. J., Sutcliffe, C. J. and Singh, J. (2012) Sintered aluminium heat pipe (SAHP). In: 16th International Heat Pipe Conference (16th IHPC), 20-24 May 2012, Lyon, France.

Brüne, Markus, Pflitsch, Andreas, Agnew, Brian and Spiegel, Jonathan (2012) Dynamics of natural air flow inside subway tunnels. In: 5th International Symposium on Tunnel Safety and Security (ISTSS 2012), 14 - 16 March 2012, New York, USA.

Aneke, Mathew, Agnew, Brian, Aliyu, B., Walker, Sara and Atan, R. (2011) Prospects of Croton Megaloacarpus (musine) as a source of bio-diesel. In: Nigerian Alternative Energy Expo, 17 - 19 October 2011, Abuja, Nigeria.

Aneke, Mathew, Agnew, Brian and Underwood, Chris (2011) Power generation through the use of waste heat energy from process industries: a greener approach to reducing CO2 emmissions and global warming in Nigeria. In: International Conference On Renewable and Alternative Energy (FUTO Alternative Energy International Conference ), 8 - 11 August 2011, Zaria, Nigeria.

Masheiti, Salah, Agnew, Brian and Atan, R. (2009) The effects of coolant temperature and low energy source on various cycle parameters of single effect LiBr-H20 absorption chillers. In: UNSPECIFIED.

Agnew, Brian, Bughazem, Mohamed and Talbi, M. (2009) Improvement of the single shaft combined cycle gas turbine power plant by intake air cooling using an absorption cooler. In: UNSPECIFIED.

Agnew, Brian and Masheiti, Salah (2009) Simulation of water and air cooled Lithium Bromide chillers powered by low temperature geothermal heat source at arid zone area. In: UNSPECIFIED.

Agnew, Brian, Brüne, Markus, Killing, M., Pflitsch, Andreas and Sleiling, B. (2009) Subway climatology in Newcastle upon Tyne. In: 7th International Conference on Urban Climate, 29 June - 3 July 2009, Yokohama, Japan.

Masheiti, Salah and Agnew, Brian (2009) Utilisation of a low temperature geothermal heat source for power generation. In: International Conference and Exhibition on Green Energy & Sustainability for Arid Regions & Mediterranean Countries (ICEGES 2009), 10 - 12 November 2009, Amman, Jordan.

Agnew, Brian and Janiszewski, Adam (2009) Boiling flows in pourous media. In: 4th International Conference on the Applications of Porous Media (ICAPM 2009), 10 - 12 August 2009, Yeditepe University , Istanbul, Turkey.

Halimic, E., Mullen, D. and Agnew, Brian (2009) Effect of microchannel size, heat flux and mass flux on boiling heat transfer. In: 11th UK Heat Transfer Conference, 6 - 8 September 2009, London, UK.

Janiszewski, Adam, Agnew, Brian, Bailey, Paul B., Dadd, Michael W., Stone, C. Richard, Davies, Gareth F., Eames, Ian W. and Maidment, Graeme G. (2009) Superheated outlet flow from porous media evaporator. In: 11th UK Heat Transfer Conference, 6 - 8 September 2009, London, UK.

This list was generated on Tue Jun 18 22:44:08 2013 IST.

Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence