Items where Author is "Hasan, Reaz"

Article

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127. pp. 534-545. ISSN 0017-9310

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds using well-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1565-1577. ISSN 0268-3768

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2018) Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants. International Journal of Manufacturing Technology and Management (IJMTM), 32 (3). pp. 297-311. ISSN 1368-2148

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Comparative LCA of technology improvement opportunities for a 1.5 MW wind turbine in the context of an onshore wind farm. Clean Technologies and Environmental Policy, 20 (1). pp. 173-190. ISSN 1618-954X

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2016) An Empirical Analysis of the Factors That Support the Drivers of Sustainable Manufacturing. Procedia CIRP, 56. pp. 491-495. ISSN 2212-8271

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Fargani, Haitem (2016) A hybrid Stochastic Approach for Improving Uncertainty Analysis in the Design and Development of a Wind Turbine. Procedia CIRP, 56. pp. 19-24. ISSN 2212-8271

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2016) Investigation of a new effective viscosity model for nanofluids. Procedia Engineering, 157. pp. 404-413. ISSN 1877-7058

Ozoemena, Matthew, Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of technology improvement opportunities for a 1.5 MW wind turbine using a hybrid stochastic approach in life cycle assessment. Renewable Energy, 93. pp. 369-382. ISSN 0960-1481

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2015) Effect of Emissivity on the Heat and Mass Transfer of Humid Air in a Cavity Filled with Solid Obstacles. Numerical Heat Transfer, Part A: Applications, 67 (5). pp. 531-546. ISSN 1040-7782

Iyi, Draco and Hasan, Reaz (2015) Natural convection flow and heat transfer in an enclosure containing staggered arrangement of blockages. Procedia Engineering, 105. pp. 176-183. ISSN 1877-7058

Iyi, Draco, Hasan, Reaz, Penlington, Roger and Underwood, Chris (2014) Double Skin Façade: Modelling Technique and Influence of Venetian Blinds on the Airflow and Heat Transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311

Hasan, Reaz and Puthukkudi, Agin (2013) Numerical study of effusion cooling on an adiabatic flat plate. Propulsion and Power Research, 2 (4). pp. 269-275. ISSN 2212-540X

Danaher, Sean, Dudziak, Tomasz, Datta, Psantu, Hasan, Reaz and Leung, Pak Sing (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2013) Numerical simulation of 2D turbulent natural convection of humid air in a cavity filled with solid objects. Procedia Engineering, 56. pp. 538-543. ISSN 1877-7058

Book Section

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2017) A Proposed Implementation Process for a Sustainable Manufacturing Framework. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 365-370. ISBN 978-1-61499-791-7

Ibude, Ikechukwu, Hasan, Reaz, Fargani, Haitem, Ozoemena, Matthew and Cheung, Wai Ming (2014) Sustainability analysis of Palm oil vs. Jatropha. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 265-270. ISBN 978-0-9926958-4-2

Fargani, Haitem, Cheung, Wai Ming, Hasan, Reaz and Birkett, Martin (2014) An integrated approach incorporating lean six sigma and life cycle assessment to support sustainable manufuacturing. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 227-231. ISBN 978-0-9926958-4-2

Ramadan, Ahmed, Hasan, Reaz and Tudor, Jenna (2014) Simulation of flow and heat transfer of humid air in spent fuel cooling ponds. In: Lecture Notes in Engineering and Science. Newswood Limited, London, pp. 1508-1512. ISBN 9789881925350

Robinson, Paul, Hasan, Reaz and Tudor, Jenna (2013) Numerical Simulation of Flow and Heat Transfer in Spent Fuel Cooling Ponds. In: Proceedings of The World Congress on Engineering 2013. Lecture Notes in Engineering and Computer Science, III . Newswood Limited, Hong Kong, pp. 1861-1864. ISBN 978-9881925299

Conference or Workshop Item

Perera, Noel, Hasan, Reaz and Etaig, Saleh (2017) The Investigation of Heat Transfer Performance and Fluid Flow Characteristics of Titanium Oxide-Water Nanofluid in a Shell and Tube Heat Exchanger with Inclined Baffles. In: International Research Conference on Sustainable Energy, Engineering, Materials and Environment (SEEME), 26-28 July 2017, Newcastle upon Tyne.

Etaig, Saleh, Hasan, Reaz, Perera, Noel and Ramadan, Ahmed (2017) Flow characteristics and heat transfer performance of Magnesium Oxide-Water nanofluid in the entrance region in circular cross-section microchannel. In: International Symposium on Advances in Computational Heat Transfer ICHMT, 28th May - 1st June 2017, Napoli, Italy.

Etaig, Saleh, Hasan, Reaz, Perera, Noel and Ramadan, Ahmed (2017) Investigation of the effect of Brownian motion on the flow characteristics in natural convection using different nanofluids. In: CHT-17 - ICHMT International Symposium on Advances in Computational Heat Transfer, 28th May - 1st June 2017, Napoli, Italy.

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2015) An approach to achieve operational effectiveness and sustainability requirements in manufacturing. In: International Conference on Manufacturing Research (ICMR2015), 8 - 10 September, 2015, Bath.

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2015) Numerical simulation of flow and heat transfer around vertical cylinder submerged in water. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2015) Numerical study on the effect of inclination angle on heat transfer performance in back-ward facing step utilizing nanofluid. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

Bowes, Aidan and Hasan, Reaz (2015) A computational analysis of flow and acoustics around a car wing mirror. In: World Congress on Engineering 2015, 1-3 July 2015, Imperial College, London.

Hasan, Reaz, Tudor, Jenna and Ramadan, Ahmed (2015) Modelling of Flow and Heat Transfer in Spent Fuel Cooling Ponds. In: International Congress on Advances in Nuclear Power Plants, 3-5 May 2015, Nice, France.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2014) Effect of Blockages on Natural Convection Turbulent Airflow and Heat Transfer in a Cavity. In: CONV-14: International Symposium on Convective Heat and Mass Transfer, June 8 - 13, 2014, Kusadasi, Turkey.

Cheung, Wai Ming, Pachisia, Vedant and Hasan, Reaz (2014) Facilitating Waste Paper Recycling and Remanufacturing via a Cost Modelling Approach. In: International Conference on Sustainable Design and Manufacturing, 28-30 April 2014, Cardiff University.

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2014) Investigation of enhancement of heat transfer in natural convection utilizing of nanofluids. In: XIII International Conference on Heat Transfer Applications, 19-20 January, 2015, London.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2013) A Review of Life Cycle Assessment of Renewable Energy Systems. In: 11th International Conference on Manufacturing Research, 19 - 20 September 2013, Cranfield University.

Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2013) A novel methodology to ascertain the heating mechanism of steel wire during annealing in a tube furnace. In: ICMR2013: International Conference on Manufacturing Research, 19-20 Sept 2013, Cranfield University, UK.

Hasan, Reaz (2012) Identification of generic errors for effective formative feedback in energy studies thematic area of mechanical engineering. In: Innovation, Practice and Research in Engineering Education (EE2012), 18-20 September 2012, Coventry University.

Hasan, Reaz (2012) Teaching ethics to engineering undergraduates - lessons learned and a guide for lecturers: perspective from an English University. In: Innovation, Practice and Research in Engineering (EE2012), 18-20 September 2012, Coventry, UK.

Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2012) Numerical modelling of heat transfer in a tube furnace for steel wire annealing. In: 29th International Manufacturing Conference (IMC29), 29-30 August 2012, University of Ulster, Northern Ireland.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2012) Interaction effects between surface radiation and double-diffusive turbulent natural convection in an enclosed cavity filled with solid obstacles. In: International Symposium on Advances in Computational Heat Transfer ICHMT, 1-6 July 2012, Bath, England.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. In: The Asian Symposium of Computational Heat Transfer and Fluid Flow, 22-26 September 2011, Kyoto University, Kyoto, Japan.

Perera, Noel and Hasan, Reaz (2005) CFD modelling of cooling air in the NNPB process for glass container production. In: 4th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics HEFAT2005, 19th -22th September 2005, Cairo, Egypt.

Tarikere, S.K., Hasan, Reaz, Penlington, Roger and Underwood, Chris (2005) Numerical prediction of flow and pollutant dispersal in an urban street canyon. In: 4th International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, 19-22 September 2005, Cairo, Egypt.