Items where Author is "Huo, Dehong"

Article

Le, Bao, Kernin, Arnaud, Khaliq, Jibran, Fu, Guoyu, Huo, Dehong, Bilotti, Emiliano, Zhang, Han and Shyha, Islam (2021) Micro-End-Milling of Carbon Nanotube Reinforced Epoxy Nanocomposites Manufactured using Three Roll Mill Technique. Journal of Manufacturing Processes, 70. pp. 307-320. ISSN 1526-6125

Shakoori, Niusha, Fu, Guoyu, Le, Bao, Khaliq, Jibran, Jiang, Long, Huo, Dehong and Shyha, Islam (2021) An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites. International Journal of Advanced Manufacturing Technology, 113 (7). pp. 2003-2015. ISSN 0268-3768

Shyha, Islam, Huo, Dehong, Hesamikojidi, Peyman, Eldessouky, Hossam and El-Sayed, Mahmoud Ahmed (2021) Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites. International Journal of Advanced Manufacturing Technology, 112 (3-4). pp. 1101-1113. ISSN 0268-3768

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 1: Mechanical Properties. Journal of Manufacturing Science and Engineering, 142 (10). p. 100801. ISSN 1087-1357

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 2: Micromachining. Journal of Manufacturing Science and Engineering, 142 (10). p. 100802. ISSN 1087-1357

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Alzahrani, Bandar (2020) Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International Journal of Advanced Manufacturing Technology, 107 (7-8). pp. 3169-3183. ISSN 0268-3768

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Saharudin, Mohd Shahneel (2019) Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites. Nanomaterials, 9 (7). p. 917. ISSN 2079-4991

Pancholi, Ketan, Robertson, Peter, Okpozo, Paul, Beattie, Neil and Huo, Dehong (2018) Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interfaces. Journal of Physics: Energy, 1 (1). 015007. ISSN 2515-7655

Teng, Xiangyu, Chen, Wanqun, Huo, Dehong, Shyha, Islam and Lin, Chao (2018) Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures, 203. pp. 636-647. ISSN 0263-8223

Teng, Xiangyu, Huo, Dehong, Shyha, Islam, Chen, Wanqun and Wong, Eugene (2018) An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2127-2140. ISSN 0268-3768

Teng, Xiangyu, Huo, Dehong, Chen, Wanqung, Wong, Eugene, Zheng, Lu and Shyha, Islam (2018) Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes, 32. pp. 116-126. ISSN 1526-6125

Shyha, Islam, Gariani, Salah, El-Sayed, Mahmoud and Huo, Dehong (2018) Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V. Metals, 8 (3). p. 185. ISSN 2075-4701

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2018) Experimental Analysis of System Parameters for Minimum Cutting Fluid Consumption when Machining Ti-6Al-4V Using a Novel Supply System. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 2795-2809. ISSN 0268-3768

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Conference or Workshop Item

Shyha, Islam, Deary, Michael and Huo, Dehong (2018) An evaluation of dust release when machining nano-structured composite materials. In: The International Conference on Materials Science and Engineering: Recent Advances and Challenges, 11-13 March 2018, Alexandria.

Naylor, Andrew, Huo, Dehong, Hackney, Philip and Perera, Noel (2017) Operational performance of individual handsaw teeth. In: 23rd International Wood Machining Seminar, 28th-31st May 2017, Warsaw, Poland.