Items where Author is "Persson, Martin"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 16.

Article

Khan, Fahd, Daadbin, Ali, Persson, Martin and Haider, Julfikar (2014) Development of AlTiN coated carbide bandsaw for machining titanium-17 alloy. International Journal of Surface Science and Engineering, 8 (1). pp. 11-27. ISSN 1749-7868

Khan, Fahd, Daadbin, Ali, Persson, Martin, Haider, Julfikar and Hellbergh, Hakan (2012) Assessing the performance of TiAlSiN coating on bandsaw tooth when cutting Ti-17 alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (5). pp. 870-877. ISSN 0954-4054

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2010) Forces, wear modes and mechanisms in bandsawing steel workpieces. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 224 (11). pp. 155-162. ISSN 0954-4054

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2009) Measurement of specific cutting energy for evaluating the efficiency of bandsawing different workpiece materials. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 958-965. ISSN 0890-6955

Sarwar, Mohammed, Persson, Martin and Hellbergh, Hakan (2007) Wear of the cutting edge in the bandsawing operation when cutting austentic 17-7 stainless steel. Wear, 263 (7-12). pp. 1438-1441. ISSN 0043-1648

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2005) Wear and failure modes in the bandsawing operation when cutting ball-bearing steel. Wear, 259 (7-12). pp. 1144-1150. ISSN 0043-1648

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2004) Wear of high speed steel bi-metal bandsaw blade when cutting avesta polarit 17-7 stainless steel in the as-cast state. Materials Science Forum. pp. 431-437. ISSN 0255-5476

Book Section

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2012) Performance evaluation of bandsaw using scientific method when cutting tool steels. In: Proceedings of the 37th International Matador Conference. Springer, London, pp. 209-212.

Report

Sarwar, Mohammed, Hellbergh, Hakan, Doraisingam, Anand Raj and Persson, Martin (2002) Simulation of the intermittent cutting action of a bandsaw blade. Technical Report. Society of Manufacturing Engineers.

Conference or Workshop Item

Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2013) A novel methodology to ascertain the heating mechanism of steel wire during annealing in a tube furnace. In: ICMR2013: International Conference on Manufacturing Research, 19-20 Sept 2013, Cranfield University, UK.

Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2012) Numerical modelling of heat transfer in a tube furnace for steel wire annealing. In: 29th International Manufacturing Conference (IMC29), 29-30 August 2012, University of Ulster, Northern Ireland.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin, Hellbergh, Hakan, Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) Material behavior at the extreme cutting edge in bandsawing. In: AMPT 2010 International conference on advances in materials and processing technologies, 24-27 October 2010, Paris, France.

Nawaz Kahn, Fahd, Sarwar, Mohammed and Persson, Martin (2009) Cutting energy and wear in bandsawing operation when cutting Ti-6AI-4V alloy. In: International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2009), 6-8 July 2009, University of Teeside, Middlesborough, United Kingdom.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Characteristics of tool cutting edges for coatability. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Evaluating the performance of TiN coating on a PM HSS milling cutter used in manufacturing of bandsaws. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2004) Wear and failure of high-speed steel bimetal bandsaws when cutting ball-bearing steel. In: 34th International MATADOR Conference, 7-9 July 2004, Manchester.

This list was generated on Thu Jan 23 05:01:05 2020 UTC.