Items where Author is "Wu, Hongwei"

Article

Xie, Y., Gilmour, M.S., Yuan, Yanping, Jin, H. and Wu, Hongwei (2017) A review on house design with energy saving system in the UK. Renewable and Sustainable Energy Reviews, 71. pp. 29-52. ISSN 1364-0321

Li, Haiwang, Huang, Haoran, Xu, Guoqiang, Wen, Jie and Wu, Hongwei (2017) Performance analysis of a novel compact air-air heat exchanger for aircraft gas turbine engine using LMTD method. Applied Thermal Engineering, 116. pp. 445-455. ISSN 1359-4311

Yuan, Yanping, Gao, Xiangkui, Wu, Hongwei, Zhang, Zujin, Cao, Xiaoling, Sun, Liangliang and Yu, Nanyang (2017) Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Method and model development. Energy, 119. pp. 817-833. ISSN 0360-5442

Deng, Yangbo, Wu, Hongwei and Su, Fengmin (2017) Combustion and exhaust emission characteristics of low swirl injector. Applied Thermal Engineering, 110. pp. 171-180. ISSN 1359-4311

Chen, Mengdong, Xie, Yongqi, Wu, Hongwei, Shi, Shang and Yu, Jianzu (2017) Modeling solubility of nitrogen in clean fire extinguishing agent by Peng-Robinson equation of state and a correlation of Henry’s law constants. Applied Thermal Engineering, 110. pp. 457-468. ISSN 1359-4311

Zhu, Jianqin, Wang, Kai, Li, Guoqing, Wu, Hongwei, Jiang, Zhaowu, Lin, Feng and Li, Yongliang (2016) Experimental Study of the Energy and Exergy performance for a Pressurized Volumetric Solar Receiver. Applied Thermal Engineering, 104. pp. 212-221. ISSN 1359-4311

Liu, Dongdong, Tao, Zhi, Luo, Xiang, Wu, Hongwei and Yu, Xiao (2016) Development of a new factor for hot gas ingestion through rim seal. Journal of Engineering for Gas Turbines and Power, 138 (7). 072501. ISSN 0742-4795

Liu, Dongdong, Tao, Zhi, Luo, Xiang, Kang, Wenwu, Wu, Hongwei and Yu, Xiao (2016) Investigation on the impact of protrusion parameter on the efficiency of converting additional windage loss for ingress alleviation in rotor-stator system. Journal of Engineering for Gas Turbine and Power, 138 (11). p. 112604. ISSN 0742-4795

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Mahkamov, Khamid, Wu, Hongwei and Mirzaeian, Mojtaba (2016) Numerical Simulation of Sub-cooled Boiling Flow with Fouling Deposited Inside Channels. Applied Thermal Engineering, 103. pp. 434-442. ISSN 1359-4311

Wang, Chao, Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Yang, Bo (2016) A two-dimensional splashing model for investigating impingement characteristics of Supercooled Large Droplets. International Journal of Multiphase Flow, 80. pp. 131-149. ISSN 0301-9322

Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Thompson, James (2016) Aircraft Ice Accretion Prediction Using Neural Network and Wavelet Packet Transform. Aircraft Engineering and Aerospace Technology, 88 (1). pp. 128-136. ISSN 0002-2667

Wang, Kai, Wu, Hongwei, Wang, Dongyu, Tong, Z., Lin, F. and Olabi, Abdul (2015) Experimental Study on a Coiled Tube Solar Receiver under Variable Solar Radiation Condition. Solar Energy, 122. pp. 1080-1090. ISSN 0038-092X

Jiang, Z., Wang, Kai, Wu, Hongwei, Wang, Yue and Du, Juan (2015) A two-dimensional analytical model for prediction of the radiation heat transfer in open-cell metal foams. Applied Thermal Engineering, 93. pp. 1273-1281. ISSN 1359-4311

Zhu, Jianqin, Wang, Kai, Wu, Hongwei, Wang, Dunjin, Du, Juan and Olabi, A. (2015) Experimental Investigation on the Energy and Exergy Performance of a Coiled Tube Solar Receiver. Applied Energy, 156. pp. 519-527. ISSN 0306-2619

Xie, Yongqi, Zhang, Jie, Xie, Liyao, Yu, Yin, Wu, Hongwei, Zhang, Hongxing and Gao, Hongxia (2015) Experimental Investigation On the Operating Characteristics of a Dual Compensation Chamber Loop Heat Pipe Subjected to Acceleration Field. Applied Thermal Engineering, 81. pp. 297-312. ISSN 1359-4311

Wang, Chao, Chang, Shinan and Wu, Hongwei (2015) Lagrangian Approach for Simulating Supercooled Large Droplets’ Impingement Effect. Journal of Aircraft, 52 (2). pp. 524-537. ISSN 0021-8669

Wang, Chen, Chang, Shinan, Wu, Hongwei, Ding, L. and Thompson, James (2015) Theoretical Modeling of Spray Drop Deformation and Breakup in the Multimode Breakup Regime. Atomization and Sprays, 25 (10). pp. 857-869. ISSN 1045-5110

Luo, Xiang, Liu, Dongdong, Wu, Hongwei and Tao, Zhi (2014) Particle Image Velocimetry Measurement and Computational Fluid Dynamic Simulations of the Unsteady Flow within a Rotating Disk Cavity. Journal of Engineering for Gas Turbines and Power, 136 (11). p. 112601. ISSN 0742-4795

Luo, Xiang, Han, G., Wu, Hongwei, Wang, L. and Xu, Guoqiang (2014) Experimental Investigation of Pressure Loss and Heat Transfer in a Rotor-Stator Cavity with Two Outlets. International Journal of Heat and Mass Transfer, 78. pp. 311-320. ISSN 0017-9310

Chen, Qun, Yang, Ruiming, Zhao, Bo, Li, Yan, Wang, Shujuan, Wu, Hongwei, Zhuo, Yuqun and Chen, Changhe (2014) Investigation of Heat of Biomass Pyrolysis and Secondary Reactions by Simultaneous Thermogravimetry and Differential Scanning Calorimetry. Fuel, 134. pp. 467-476. ISSN 0016-2361

Luo, Xiang, Zhao, X., Wang, L., Wu, Hongwei and Xu, Guoqiang (2014) Flow Structure and Heat Transfer Characteristics in Rotor-Stator Cavity with Inlet at Low Radius. Applied Thermal Engineering, 70 (1). pp. 291-306. ISSN 1359-4311

Luo, Xiang, Wang, L., Zhao, X., Xu, Guoqiang and Wu, Hongwei (2014) Experimental Investigation of Heat Transfer in a Rotor-Stator Cavity with Cooling Air Inlet at Low Radius. International Journal of Heat and Mass Transfer, 76. pp. 65-80. ISSN 0017-9310

Xie, Liyao, Xie, Yongqi, Wu, Hongwei and Yu, Jianzu (2014) High Gravity Influence on Boiling Heat Transfer in Helical Coils. International Journal of Heat and Mass Transfer, 73. pp. 706-715. ISSN 0017-9310

Wang, Chao, Chang, Shinan, Wu, Hongwei and Xu, J. (2014) Modeling of Drop Breakup in the Bag Breakup Regime. Applied Physics Letters, 104 (15). p. 154107. ISSN 0003-6951

Wu, Hongwei, Tassou, Savvas and Karayiannis, Tassos (2013) Modelling and control approaches for energy reduction in continuous frying systems. Applied Energy, 112. pp. 939-948. ISSN 0306-2619

Wu, Hongwei, Tassou, Savvas, Karayiannis, T. G. and Jouhara, H. (2013) Analysis and Simulation of Continuous Food Frying Processes. Applied Thermal Engineering, 52 (2). pp. 332-339. ISSN 1359-4311

Wang, Anliang, Wu, Hongwei, Tang, Haibin, Liu, Yu and Liang, Xing (2013) Development and Testing of a New Thrust stand for Micro-thrust Measurement in Vacuum Conditions. Vacuum, 91. pp. 35-40. ISSN 0042-207X

Wu, Hongwei, Karayiannis, Tassos and Tassou, Savvas (2013) A Two-dimensional Frying Model for the Investigation and Optimisation of Continuous Industrial Frying System. Applied Thermal Engineering, 51 (1-2). pp. 926-936. ISSN 1359-4311

Aneke, Mathew, Agnew, Brian, Underwood, Chris, Wu, Hongwei and Masheiti, Salah (2012) Power generation from waste heat in a food processing application. Applied Thermal Engineering, 36. pp. 171-180. ISSN 1359-4311

Wu, Hongwei, Jouhara, H., Tassou, Savvas and Karayiannis, Tassos (2012) Modelling of Energy Flows in Potato Crisp Frying Processes. Applied Energy, 89 (1). pp. 81-88. ISSN 0306-2619

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Zhao, Zhenming and Wu, Hongwei (2009) Local Heat Transfer Measurements on a Rotating Flat Blade Model with a Single Film Hole. Progress in Natural Science: Materials International, 19 (3). pp. 321-330. ISSN 1002-0071

Tao, Zhi, Zhao, Zhenming, Ding, Shuiting, Xu, Guoqiang and Wu, Hongwei (2009) Suitability of Three Different Two-equation Turbulent Models in Predicting Film Cooling Performance Over a Rotating Blade. International Journal of Heat and Mass Transfer, 52 (5-6). pp. 1268-1275. ISSN 0017-9310

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2009) Numerical Study of Film-Cooling Performance on a Rotating Model. Journal of Thermophysics and Heat Transfer, 23 (1). pp. 129-138. ISSN 0887-8722

Tao, Zhi, Yang, Xiaojun, Ding, Shuiting, Xu, Guoqiang, Wu, Hongwei, Deng, Hongwu and Luo, Xiang (2008) Experimental Study of Rotation Effect on Film Cooling over the Flat Wall with a Single Hole. Experimental Thermal and Fluid Science, 32 (5). pp. 1081-1089. ISSN 0894-1777

Avramidis, Stavros and Wu, Hongwei (2007) Artificial Neural Network and Mathematical Modelling Comparative Analysis of Nonisothermal Diffusion of Moisture in Wood. Holz als Roh-und Werkstoff, 65 (2). pp. 89-93. ISSN 0018-3768

Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2006) Multiplex Shear Stress-induced Nucleation in Dynamic Microcellular Foaming Process. Polymer Engineering and Science, 46 (12). pp. 1728-1738. ISSN 1548-2634

Wu, Hongwei and Avramidis, Stavros (2006) Prediction of Timber Kiln Drying Rates by Neural Networks. Drying Technology - An International Journal, 24 (12). pp. 1541-1545. ISSN 0737-3937

Tao, Zhi, Wu, Hongwei, Chen, Guohua and Deng, Hongwu (2005) Numerical Simulation of Conjugate Heat and Mass Transfer Process within Cylindrical Porous Media with Cylindrical Dielectric Cores in Microwave Freeze-drying. International Journal of Heat and Mass Transfer, 48 (3/4). pp. 561-572. ISSN 0017-9310

Wu, Hongwei, Tao, Zhi, Gao, Ping and Chen, Guohua (2004) Ice Crystal Sizes and Their Impact on Microwave Assisted Freeze Drying. Chinese Journal of Chemical Engineering, 12 (6). pp. 831-835. ISSN 1004 9541

Wu, Hongwei, Tao, Zhi, Chen, Guohua, Deng, Hongwu, Xu, Guoqiang and Ding, Shuiting (2004) Conjugate Heat and Mass Transfer Process within Porous Media with Dielectric Cores in Microwave Freeze-drying. Chemical Engineering Science, 59 (14). pp. 2921-2928. ISSN 0009-2509

Book Section

Tao, Zhi, Zhao, Zhenming, Ding, Shuiting, Xu, Guoqiang, Yang, Bin and Wu, Hongwei (2008) Heat Transfer Coefficients of Film Cooling on a Rotating Turbine Blade Model: Part I. Effect of Blowing Ratio. In: ASME Proceedings: Heat Transfer. American Society of Mechanical Engineers, pp. 521-531. ISBN 978-0-7918-4314-7

Wu, Hongwei, Xu, Guoqiang, Yang, Bin and Tao, Zhi (2008) Heat transfer coefficients of film cooling on a rotating turbine blade model: Part II - effect of Reynolds number and rotation number. In: Proceedings of the ASME Turbo Expo 2008: Power for Land, Sea, and Air. American Society of Mechanical Engineers, New York, pp. 533-541. ISBN 9780791843147

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2008) Theoretical analysis of rotating film cooling mechanism: Part II. A new dimensionless parameter to describe the coolant deflection phenomenon near the pressure surface. In: Proceedings of the 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2008 (ISROMAC-12). ISROMAC-12, New York, pp. 697-702. ISBN 9781605604879

Conference or Workshop Item

Kode, T. E., Wu, Hongwei and Ogwu, A. A. (2015) Critical Review of the Thermo-hydraulic Properties of Fluids in Micro Channels. In: The 8th International Conference on Sustainable Energy & Environmental Protection, Proceedings of SEEP 2015, August 11-14, 2015, Paisley, UK.

Wu, Hongwei, Kwatra, R., Mirzaeian, Mojtaba, Liu, Xiangyun and Grant, J. (2015) Experimental Investigation and CFD Analysis of a Y-Fractal Microchannel Based Heat Sink. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Liu, Xiangyun, Liu, L., Wang, Wu, He, Bin and Wu, Hongwei (2015) Numerical Simulation of Gas-liquid Two-phase Flow in Non-circular Micro-channels. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Wu, Hongwei and Mirzaeian, Mojtaba (2015) Numerical Simulation of Vapor-liquid Two Phase Flow with Dirt Blocking Effect inside Channels. In: The 3rd SusTEM International Conference, 7-8 July 2015, Newcastle upon Tyne, UK.

Gilmour, M. S. and Wu, Hongwei (2015) House Design with Energy Saving System: A Review. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Wang, Anliang, Liu, L., Zhao, J., Lei, J., Zhang, L. and Wu, Hongwei (2014) Thermal control system design for high power electronic equipment of satellite during ground tests. In: IHTS140336, International Heat Transfer Symposium 2014, 6-9 May 2014, Beijing, China.

Wu, Hongwei, Tassou, S. A., Jouhara, H. and Karayiannis, T. G. (2010) Analysis of energy use in crisp frying processes. In: The 4th International Conference on Sustainable Energy & Environmental Protection, 29 June - 2 July 2010, BARI, Italy.

Xu, Guoqiang, Wang, Meng, Tao, Zhi, Ding, Shuiting, Wu, Hongwei and Guo, Jun (2008) Numerical analysis of flow and heat transfer characteristics of Y-fractal-link micro-channel networks. In: The 8th International Symposium on Advances in Computational Heat Transfer, 11 - 16 May 2008, Marrakech.

Tao, Zhi, Han, Shujun, Ding, Shuiting and Wu, Hongwei (2008) A new approach to simulate the fluid network of unsteady flow. In: The 8th International Symposium on Advances in Computational Heat Transfer, 11 - 16 May 2008, Marrakech.

Tao, Zhi, Liu, N., Ding, Shuiting, Xu, Guoqiang and Wu, Hongwei (2008) Numerical simulation of film cooling effectiveness on flat plate. In: The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 17-22 February 2008, Honolulu, Hawaii.

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2008) Theoretical Analysis of Rotating Film Cooling Mechanism: Part I. Dimensionless Groups of Adiabatic Effectiveness and Heat Transfer Coefficient. In: The 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 17 -22 February 2008, Honolulu, Hawaii.

Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2007) Polystyrene nanocomposite foams prepared by dynamic foaming process. In: First International Conference and Exhibition on Integration and Commercialization of Micro and Nanosystems, 10-13 January 2007, Hainan.

Wu, Hongwei, Tao, Zhi, Chen, Guohua, Xu, Guoqiang and Ding, Shuiting (2004) Theoretical study of heat and mass transfer within cylindrical porous media with cylindrical dielectric cores in microwave freeze-drying. In: International Conference on Thermal Engineering: Theory and Applications, 31 May - June 4 2004, Beirut.