Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2006

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | E | F | G | H | I | J | L | M | O | P | R | S | T | V | W | X | Z
Number of items: 53.

B

Beaney, David (2006) An examination of sectoral mobility in the UK labour force. In: 22nd Annual ARCOM Conference, 4-6 September 2006, Birmingham, UK.

Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2006) Effects of annealing on the electrical properties of NiCr vs AlCu thin film resistors prepared by DC magnetron sputtering. In: Proceedings of the 20th Annual Passive Components Conference (CARTS 2006), Bad Homburg, Germany. ECA, Arlington, VA, USA, pp. 307-316. ISBN 978-0790801100

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2006) Sull’utilizzo dei materiali FRP per il rinforzo delle strutture lignee. In: Lignea: Studi sulla conservazione e il restauro del patrimonio artistico e architettonico ligneo. Quattroemme, pp. 349-398. ISBN 9788885962897

Borzomati, Pietro and Corradi, Marco (2006) La società Dante Alighieri a Terni, cento anni di storia. La società Dante Alighieri.

Butt, Talib E., Mair, Nigel and Oduyemi, Kehinde O. K. (2006) Hazard Identification and Categorization for Waste Disposal Sites: Part 1 – an Integrated Approach Lacks. Risk Management, 8 (2). pp. 133-148. ISSN 1460-3799

Butt, Talib E., Mair, Nigel and Oduyemi, Kehinde O. K. (2006) Hazard Identification and Categorization for Waste Disposal Sites: Part 2 – A Computer-Aided Procedure. Risk Management, 8 (3). pp. 206-220. ISSN 1460-3799

C

Chan, Paul and Greenwood, David (2006) Towards a human resources management approach in supply chain management. In: Sustainability and Value through Construction Procurement conference, 29 November - 2 December 2006, Salford, UK.

Cheung, Wai Ming, Bramall, David, Maropoulos, Paul, Gao, James and Aziz, Hayder (2006) Organisational Knowledge Encapsulation and Re-use in Collaborative Product Development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X

Corradi, Marco, Speranzini, Emanuela, Borri, Antonio and Vignoli, Andrea (2006) In-plane shear reinforcement of wood beam floors with FRP. Composites Part B: Engineering, 37 (4-5). pp. 310-319. ISSN 13598368

D

Davidson, Adam and Hackney, Philip (2006) Introduction of CAD/CAM Technology into MKW Engineering. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

E

Elmarakbi, Ahmed, Sennah, Khaled, Samaan, Magdy and Siriya, Praveen (2006) Crashworthiness of Motor Vehicle and Traffic Light Pole in Frontal Collisions. Journal of Transportation Engineering, 132 (9). pp. 722-733. ISSN 0733-947X

F

Ferrari, Begoña, Gonzalez Sanchez, Sergio, Moreno, Rodrigo and Baudín, Carmen (2006) Multilayer coatings with improved reliability produced by aqueous electrophoretic deposition. Journal of the European Ceramic Society, 26 (1-2). pp. 27-36. ISSN 0955 2219

Fleming, William (2006) Prediction of the fatigue of metal matrix composites using theory of cells. Doctoral thesis, Northumbria University.

G

Garcés, Gerardo, Pérez, Pablo, Gonzalez Sanchez, Sergio and Adeva, Paloma (2006) Development of long-period ordered structures during crystallisation of amorphous Mg80Cu10Y10and Mg83Ni9Y8. Zeitschrift für Metallkunde, 97 (4). pp. 404-408. ISSN 0044-3093

Gheblawi, Ezzeddin (2006) An investigation of the heat transfer by conduction and radiation between hot glass and tool moulding. Doctoral thesis, Northumbria University.

Graham, D., Smith, Simon D. and Crapper, Martin (2006) Refining the case-based reasoning model of construction processes. In: Proceedings 22nd Annual ARCOM Conference. ARCOM, pp. 135-142. ISBN 0 9552390 0 1

Greenwood, David (2006) An innovative approach to procurement using integrated supply chains. Construction Information Quarterly, 8 (1). pp. 3-6. ISSN 1469-4891

Greenwood, David, Yates, D. J. and Howarth, Tim (2006) Supply chain negotiations: what do the participants want? In: BEAR 2006, 10-13 April 2006, Hong Kong.

H

Hackney, Philip (2006) Analysis of the application of the "digital light" rapid prototyping processing for functional rapid manufactured components. In: 7th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 22 June 2006, High Wycombe.

Hackney, Philip and Sarwar, Mohammed (2006) Rapid Manufacturing of Polymer Injection Mould Tool Inserts for Prototype Tooling Production. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2006) Product Enhancement with a systems approach, utilising Time Compression Technologies. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hogg, Keith and Greenwood, David (2006) The impact of sequential thinking in the risk management process. In: ICiBE 2006, 13-15 June 2006, Kuala Lumpur.

Howarth, Tim (2006) Continuing professional development requirements of built environment professions: a UK perspective. In: ICiBE 2006, 13-15 June 2006, Kuala Lumpur.

Howarth, Tim (2006) Enhancing assessment in built environment health and safety education: a case study of developed practice. In: BEAR 2006, Construction Sustainability and Innovation. Hong Kong Polytechnic University. ISBN 978-9623675116

Howarth, Tim (2006) A review of the APC and CPD requirements of five built environment professional bodies. Working Paper. Centre for Education in the Built Environment (CEBE), Higher Education Academy, Cardiff.

Howarth, Tim and Watson, Paul (2006) An innovative degree scheme built on CPD activities with work based learning. CEBE Transactions, 3 (1). pp. 6-22. ISSN 1745-0322

I

Inam, Fawad and Peijs, Ton (2006) Re-aggregation of carbon nanotubes in two-component epoxy system. Journal of Nanostructured Polymers and Nanocomposites, 2 (3). pp. 87-95. ISSN 1790-4439

Inam, Fawad and Peijs, Ton (2006) Transmission light microscopy of carbon nanotubes-epoxy nanocomposites involving different dispersion methods. Advanced Composites Letters, 15 (1). pp. 7-13. ISSN 0963-6935

J

Johansen, Eric and Wilson, Brian (2006) Investigating first planning in construction. Construction management and economics, 24 (12). pp. 1305-1314. ISSN 0144-6193

L

Li, Yifan, Li, P., Kazantzis, A., Haworth, Les, Muir, K., Ross, A., Terry, Jonathan, Stevenson, J., Gundlach, A. M. and Bunting, A. (2006) Building EWOD microfluidic array technology on top of foundry CMOS. In: IET Seminar on MEMS Sensors and Actuators. IEEE, Piscataway, NJ, pp. 23-30. ISBN 0 86341 627 6

M

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Damping the fluctuating behaviour and improving the convergence rate of the axial induction factor in the BEMT-based rotor aerodynamic codes. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Single step versus coupled aero-structure simulation of a wind turbine with bend-twist adaptive blades. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31 (11). pp. 1673-1685. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) A simple algorithm to modify an ordinary wind turbine blade to an adaptive one. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maropoulos, Paul, Bramall, David, Chapman, Peter, Cheung, Wai Ming, McKay, Kevin and Rogers, Brian (2006) Digital Enterprise Technology in Production Networks. International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 911-916. ISSN 0268-3768

Murdoch, Ian (2006) State of trade report. Other. National Specialist Contractors Council (NSCC).

O

Ojiako, G. U., Greenwood, David and Johansen, D. E. (2006) Redefining Project Failure in converged and Multi-dimensional Telecommunications ICT Projects. The Journal of the Communications Network, 5 (3). pp. 23-28.

P

Park, Daekyu, Vo, Thuc and Lee, Jaehong (2006) A simplified analytical models for framed-tubular structures using shear-deformable beam theory. In: 4th International Symposium on Steel Structure (ISSS 2006), 16-18 November 2006, Seoul, Korea.

Pearson, John (2006) The JCT 05 conditions of contract. In: Tolley's guide to construction contracts. Tolley publishing, London, UK. ISBN 9780754530428

Pearson, John (2006) The JCT 05 design and build conditions of contract. In: Tolley's Guide to Construction Contracts. Tolley, London. ISBN 978-0754530428

Pearson, John (2006) Update of section G4 European procurement rules. In: Tolley's Guide to Construction Contracts. Tolley, London. ISBN 978-0754530428

Penlington, Roger and Campbell-Wonders, Martin (2006) Assessment for learning within engineering. In: Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006. Elsevier, London, pp. 255-259. ISBN 9781905788118

R

Render, Neil (2006) The validation of pharmaceutical buildings. Doctoral thesis, Northumbria University.

Richardson, Alan (2006) Control in Screed using A142 Steel Fabric or Mixed Structural Polypropylene Fibres. In: Concrete Communication Conference, 5-6 September 2010, University College London.

Richardson, Alan (2006) Crack control in screed using A142 steel fabric or mixed structural polypropylene fibres with regard to toughness and residual strength. Structural Survey, 24 (4). pp. 319-331. ISSN 0263-080X

S

Sun, Li, Xu, Ben and Zhong, Ming-Qiang (2006) Study on the modification of polypropylene through melt-grafting. Plastics Science and Technology, 3. 005. ISSN 1005-3360

Sun, Li, Zhong, Ming-Qiang and Xu, Ben (2006) Study on the water-absorption and tribological properties of PA-6/PP blends. Materials Engineering, S1. ISSN 1001-4381

T

Tiwary, Abhishek, Morvan, Hervé and Colls, Jeremy (2006) Modelling the size-dependent collection efficiency of hedgerows for ambient aerosols. Journal of Aerosol Science, 37 (8). pp. 990-1015. ISSN 0021-8502

V

Vo, Thuc and Lee, Jaehong (2006) Flexural-torsional behavior of thin-walled closed-section composite box beams using shear-deformable beam theory. In: 4th International Symposium on Steel Structure (ISSS 2006), 16-18 November 2006, Seoul, Korea.

W

Wu, Hongwei and Avramidis, Stavros (2006) Prediction of Timber Kiln Drying Rates by Neural Networks. Drying Technology - An International Journal, 24 (12). pp. 1541-1545. ISSN 0737-3937

X

Xiang, Sai-Fei, Zhong, Ming-Qiang and Xu, Ben (2006) Preparation and characterization of PC/ABS/Montmorillonite composite. China Plastics Industry, 34 (6). pp. 23-25. ISSN 1005-5770

Xu, Ben, Zhong, Ming-Qiang and Xiang, Sai-Fei (2006) Study on hydrosol for paper surface using by emulsion polymerization. China Adhesives, 15 (5). p. 28. ISSN 1004-2849

Z

Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2006) Multiplex Shear Stress-induced Nucleation in Dynamic Microcellular Foaming Process. Polymer Engineering and Science, 46 (12). pp. 1728-1738. ISSN 1548-2634

This list was generated on Wed Dec 11 10:08:03 2024 UTC.