Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2007
![]() | Up a level |
Ascione, Luigi, Bonamini, Gabriele, Borri, Antonio, Corradi, Marco, Faggiano, Beatrice, Lavisci, Paolo, Piazza, Maurizio and Pizzo, Benedetto (2007) Considerazioni a margine del CNR-DT 201-05 Studi preliminari finalizzati alla redazione delle istruzioni per interventi di consolidamento statico di strutture lignee mediante l’utilizzo di compositi fibrorinforzati. L'Edilizia, 15 (146). pp. 16-21. ISSN 1593-3970
Ashworth, Alan and Hogg, Keith (2007) Willis's practice and procedure for the quantity surveyor. Blackwell Publishing, Oxford. ISBN 9781405145787
Avramidis, Stavros and Wu, Hongwei (2007) Artificial Neural Network and Mathematical Modelling Comparative Analysis of Nonisothermal Diffusion of Moisture in Wood. Holz als Roh-und Werkstoff, 65 (2). pp. 89-93. ISSN 0018-3768
Axmann, Roswitha and Murdoch, Ian (2007) Vergleich der Baumarkte zwischen Deutschland und Grossbritannien zwischen Rezession und Aufschwing - ausgewahlte Schwerpunkte. In: bau '07: Innovation and Research at Universities, October 2007, Frankfurt, Germany.
Beaney, David (2007) A principal components analysis of labour sectoral transfers. In: Procs 23rd Annual ARCOM Conference. ARCOM, pp. 233-242. ISBN 978-0955239007
Beheshti, Novid, Burluka, Alexey and Fairweather, Michael (2007) Assessment of Σ−Y liq model predictions for air-assisted atomisation. Theoretical and Computational Fluid Dynamics, 21 (5). pp. 381-397. ISSN 0935-4964
Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2007) Electrical characterisation of AlCuMo thin films prepared by DC magnetron sputtering. In: ICMCTF 2007: 34th International Conference on Metallurgical Coatings and Thin Films, 23-27 April, 2007, San Diego, USA.
Chan, Paul and Moehler, Robert (2007) Developing a 'road map' to facilitate employers' role in engaging with the skills development agenda. In: 23rd Annual conference of the Association of Researchers in Construction Management (ARCOM), 3-5 September 2007, Belfast, United Kingdom.
Corradi, Marco and Borri, Antonio (2007) Fir and chestnut timber beams reinforced with GFRP pultruded elements. Composites Part B: Engineering, 38 (2). pp. 172-181. ISSN 13598368
Corradi, Marco, Grazini, Andrea and Borri, Antonio (2007) Confinement of brick masonry columns with CFRP materials. Composites Science and Technology, 67 (9). pp. 1772-1783. ISSN 02663538
Corradi, Marco, Isidori, Tatiana, Soleri, Fabio, Olivari, Luca, Corradi, Marco and Kenny, J. (2007) Bamboo structural composites for marine applications. In: SAMPE Europe 28th International Conference and Forums, 2 - 4 April 2007, Paris, France.
Corradi, Sandro, Isidori, Tatiana, Soleri, Fabio, Olivari, Luca and Corradi, Marco (2007) Composite Boat Hulls with Bamboo Natural Fibres. In: International Conference Innovative Natural Fibre Composites for Industrial Applications, 10 - 13 October 2007, Rome.
Coventry, Kathryn and Griffiths, J. (2007) A rationale for the production of Devon Cob to ensure performance. In: International Conference on Sustainable Construction Materials and Technologies, 11th - 13th June 2007, Coventry, UK.
Crapper, Martin (2007) How Roman engineers could have flooded the Colosseum. Proceedings of the ICE - Civil Engineering, 160 (4). pp. 184-191. ISSN 0965-089X
Crapper, Martin, Duursma, G., Robertson, C. and Wong, S. (2007) EDEM-FLUENT investigation of bubble-tube interactions in gas-fluidized beds. In: 7th International Conference on Multiphase Flow, 9-13 July 2007, Leipzig.
Elmarakbi, Ahmed (2007) Mathematical Methodology: Incremental Harmonic Balance Method and its Application in Automotive Crashes. SAE Technical Papers, 2007. ISSN 0148-7191
Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2007) A new rate-dependent cohesive model for simulating dynamic composite delamination. In: ICCM-16 - 16th International Conference on Composite Materials, 8th - 13th July 2007, Kyoto, Japan.
Elmarakbi, Ahmed and Zu, Jean (2007) Incremental harmonic balance method for analysis of standard/smart vehicles-to-rigid barrier frontal collision. International Journal of Vehicle Safety, 2 (3). pp. 288-315. ISSN 1479-3105
Elmarakbi, Ahmed and Zu, Jean (2007) Mathematical modelling of a vehicle crash with emphasis on the dynamic response analysis of extendable cubic nonlinear dampers using the incremental harmonic balance method. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 221 (2). pp. 143-156. ISSN 0954-4070
Gonzalez Sanchez, Sergio, Figueroa, Ignacio and Todd, I. (2007) Influence of minor alloying additions on the glass-forming ability of Mg-Ni-La bulk metallic glasses. In: Third Marie Curie Summer Schools on "Partial Melt and Amorphous Solids", 19-29 August 2007, Estremoz, Portugal.
Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2007) Influence of minor alloying additions on the glass-forming ability of Mg-Ni-La bulk metallic glasses. In: BMG-Europe 2007 European Networkshop, 2-4 December 2007, Paris.
Gonzalez Sanchez, Sergio, Pérez, Pablo, Garcés, Gerardo and Adeva, Paloma (2007) Effect of RE Elements and Ni Contents on the Microstructure and Mechanical Properties of Rapidly Solidified Mg Ribbons. Materials Science Forum, 539-43. pp. 1662-1668. ISSN 1662-9752
Greenwood, David, Wu, Shuwei and Udeaja, Chika (2007) Towards a taxonomy of collaborative working: the UK construction industry. In: Northern Leadership Fellows 2007 Conference, 20 September 2007, Darlington.
Inam, Fawad and Peijs, Ton (2007) Multiscale micro-nanocomposite laminates based on carbon nanotubes and carbon fibres. In: CNT-NET 07, 10-12 September 2007, Trinity College, University of Cambridge.
Inam, Fawad and Peijs, Ton (2007) Re-agglomeration of carbon nanotubes in two-part epoxy system; influence of the concentration. In: 5th International Bhurbhan Conference on Applied Science and Technology (IBCAST 2007), 8-11 January 2007, Islamabad, Pakistan.
Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2007) Improving oxidation resistance of carbon nanotubes for sensing applications. In: CNT @ Symposium: A Mini-Symposium on the Science and Application of Carbon Nanotubes, 30 November 2007, Churchill College, University of Cambridge.
Inam, Fawad, Yan, Haixue, Zhang, Rui, Peijs, Ton and Reece, Michael (2007) Firing on all cylinders - carbon nanotube-based composites. Materials World, 15 (10). pp. 24-25. ISSN 0967-8638
Johansen, Eric and Walter, Lorenz (2007) Lean construction: Prospects for the German construction industry. Lean Construction Journal, 3 (1). pp. 19-32. ISSN 1555-1369
Mahdiputra, Suyanto (2007) Organisational learning in UK construction companies. Doctoral thesis, Northumbria University.
Maheri, Alireza and Maheri, Mahmoud (2007) Optimum geometry design of plane trusses supporting distributed loads using genetic algorithms. In: 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, 18-21 September 2007, Malta.
Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2007) Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32 (1). pp. 95-104. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Application of combined analytical/FEA coupled aero-structure simulation in design of wind turbine adaptive blades. Renewable Energy, 32 (12). pp. 2011-2018. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Combined analytical/FEA-based coupled aero structure simulation of a wind turbine with bend–twist adaptive blades. Renewable Energy, 32 (6). pp. 916-930. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Decoupled aerodynamic and structural design of wind turbine adaptive blades. Renewable Energy, 32 (10). pp. 1753-1767. ISSN 0960-1481
Ojiako, Udechukwu and Greenwood, David (2007) Information systems and technology service introduction success criteria. In: Portland International Conference on Management on Engineering and Technology, (PICMET), 5-9 August 2007, Portland, Oregon.
Penlington, Roger (2007) Keep your students in the dark - Don't let assessment suppress creativity. In: 9th International Conference on Engineering and Product Design Education, 13-14 September 2007, Newcastle-upon-Tyne.
Pettit, Carol, Azapagic, Adisa, Tiwary, Abhishek, Sinnett, Danielle, Hutchings, Tony, Peachey, Chris, DeMunck, Cécile, Chung, Winson, Sharifi, Vida, Swithenbank, Jim, Chalabi, Zaid, Fletcher, Tony, Vardoulakis, Sotiris, Grundy, Chris, Leonardi, Giovanni, Thomas, Hywel, Cleall, Peter, Jones, Martyn and Jefferis, Stephan (2007) More sustainable management of pollution: integrated approach, models and tools. In: SUE-MoT International Conference on Whole Life Urban Sustainability and its Assessment, 27-29 June 2007, Glasgow.
Pérez, Pablo, Garcés, Gerardo, Gonzalez Sanchez, Sergio, Nitsche, Heiko, Sommer, Ferdinand and Adeva, Paloma (2007) Change in mechanical properties during crystallization of amorphous Mg83Ni9Y8. Materials Science and Engineering: A, 462 (1-2). pp. 211-214. ISSN 0921 5093
Pérez, Pablo, Gonzalez Sanchez, Sergio and Garcés, Gerardo (2007) Influence of partial replacement of cerium-rich mischmetal (CeMM) by yttrium on the crystallization and mechanical properties of amorphous Mg80Ni10CeMM10 alloy. Intermetallics, 15 (3). pp. 315-326. ISSN 0966 9795
Pérez, Pablo, Gonzalez Sanchez, Sergio, Garcés, Gerardo and Adeva, Paloma (2007) Development of high strength alloys in the Mg-Ni-Y-RE system. In: 5th International Conference on Materials Structure & Micromechanics of Fracture, 27-29 June 2007, Brno, Czech Republic.
Pérez, Pablo, Gonzalez Sanchez, Sergio, Garcés, Gerardo and Adeva, Paloma (2007) Mechanical Behaviour of Mg96Ni2Y1Ce1 alloy Processed by a Powder Metallurgy Route. In: EUROMAT 2007, 10-13 September 2007, Nüremberg.
Richardson, Alan (2007) Strength development of plain concrete compared to concrete with a non-chloride accelerating admixture. Structural Survey, 25 (5). pp. 418-423. ISSN 0263-080X
Richardson, Alan (2007) A comparative study of post crack flexural toughness with A142 fabric steel reinforcement and structural polypropylene fibres in medium strength concrete beams. In: International Conference on Advances in Cement Based Materials and applications in Civil Infrastructure (ACBM-ACI), 12-14 December 2007, Lahore, Pakistan.
Rosser, Nicholas, Lim, Michael, Petley, David, Dunning, Stuart and Allison, Robert (2007) Patterns of precursory rockfall prior to slope failure. Journal of Geophysical Research, 112 (F4). F04014. ISSN 0148-0227
Ruan, Ximing (2007) Inter-organizational knowledge integration on construction projects : a social network approach. Doctoral thesis, Northumbria University.
Saravi, Mohammad, Newnes, Linda, Mileham, Antony and Cheung, Wai Ming (2007) Improved cost estimation accuracy through quality improvement techniques. In: Proceedings of the 5th International Conference on Manufacturing Research. De Montfort University, Leicester, UK, pp. 65-69. ISBN 978-0955671401
Tiwary, Abhishek, Fuentes, José, Barr, Jordan, Wang, Daniel and Colls, Jeremy (2007) Inferring the source strength of isoprene from ambient concentrations. Environmental Modelling & Software, 22 (9). pp. 1281-1293. ISSN 1364-8152
Tiwary, Abhishek, Reff, A. and Colls, Jeremy (2007) Effects of a porous barrier in altering functional group composition of ambient particulate organic matter. In: 2nd Persistent Organic Pollutants (POPs) Network Conference, 17-18 April 2007, Birmingham.
Vo, Thuc and Lee, Jaehong (2007) Flexural-torsional behavior of thin-walled closed-section composite box beams. Engineering Structures, 29 (8). 1774 - 1782. ISSN 0141-0296
Vo, Thuc and Lee, Jaehong (2007) Flexural–torsional buckling of thin-walled composite box beams. Thin-Walled Structures, 45 (9). 790 - 798. ISSN 0263-8231
Vo, Thuc and Lee, Jaehong (2007) Geometric non-linear analysis of thin-walled composite box beams. In: Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 December 2007, Hong Kong, China.
Walton, Anthony, Stevenson, Tom, Underwood, Ian, Terry, Jonathan, Smith, S., Parkes, William, Dunare, Camelia, Lin, H., Li, Yifan, Henderson, Robert, Renshaw, David, Muir, K., Desmulliez, Marc, Flynn, David, MacIntosh, Mike, Holland, Wayne, Murray, Alan, Tang, Tong Boon, Bunting, Andrew and Gundlach, A. M. (2007) Integration of IC technology with MEMS: silicon+ technology for the future. In: IET Seminar on Micro Electro-Mechanical Systems, 25 April 2007, London.
Xu, Ben, Zhong, Ming-Qiang, Sun, Li, Xiang, Sai-Fei and Xu, Li-Xin (2007) The UV aging resistance and crystallization of PP/Nano-TiO2, or Nano-ZnO composites. Polymer Materials Science & Engineering, 23 (1). pp. 137-140. ISSN 1000-7555
Xu, Bin, Zhong, Ming Qiang, Sun, Li, Xiang, Sai Fei and Xu, Li Xin (2007) UV ageing resistance and crystallization of PP/Nano-TiO2 or Nano-ZnO composites. Polymeric Materials Science and Engineering, 23 (1). pp. 137-140. ISSN 1000-7555
Yates, D. J., Hughes, Lawrence and Campbell, A. (2007) Sound insulation design of modular construction housing. In: Institute of Acoustics Spring Conference 2007, 24-25 April 2007, Cambridge.
Zhu, Wenli, Zhou, Nanqiao and Wu, Hongwei (2007) Polystyrene nanocomposite foams prepared by dynamic foaming process. In: First International Conference and Exhibition on Integration and Commercialization of Micro and Nanosystems, 10-13 January 2007, Hainan.