Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2010

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Z
Number of items: 91.

A

Aggoune, Woihida and Busawon, Krishna (2010) A Remark on Stabilization of Nonlinear Systems with Discrete and Distributed Delays. In: 8th IFAC Symposium on Nonlinear Control Systems, 1-3 September 2010, University of Bologna, Italy.

Ahmad, Haifa (2010) Studies and modelling of high temperature diffusion processes in selected high performance structural coating systems. Doctoral thesis, Northumbria University.

Akintoye, Akintola, Goulding, Jack, Rahimian, Farzad Pour, Brindley, David and Emmitt, Stephen (2010) Proceedings of the 9th International Design in Architecture Conference. University of Central Lancashire. ISBN 978-1-901922-76-9

Akter, Aysha, Pender, Garry, Wright, Grant and Crapper, Martin (2010) Modelling the Hydrodynamic Forces on Geobag Revetments using CES. In: First European Conference of the IAHR, 4-6 May 2010, Edinburgh.

Aliyu, Bashir, Shitanda, Douglas, Walker, Sara, Agnew, Brian, Masheiti, Salah and Atan, Rahim (2010) Performance and exhaust emissions of a diesel engine fuelled with Croton megalocarpus (musine) methyl ester. Applied Thermal Engineering, 31 (1). pp. 36-41. ISSN 1359-4311

B

Barry, Andrew, Wissmeier, Laurin, Parlange, J.-Y. and Crapper, Martin (2010) Discussion of “Approximation of M -Function for Partially Penetrating Wells” by Sushil K. Singh. Journal of Irrigation and Drainage Engineering, 136 (3). pp. 214-217. ISSN 0733-9437

Beaverstock, Christopher, Richardson, Thomas, Isikveren, Askin and Maheri, Alireza (2010) Complete flight control system integration and optimisation from a conceptual design phase. In: 27th Congress of the International Council of the Aeronautical Sciences, 19-24 September 2010, Nice, France.

Blackhall, Ian and Littlemore, Michelle (2010) The impacts of personal stress upon critical project decision making in construction. Built and Natural Environment Research Papers, 3 (1). pp. 7-16. ISSN 1756-2473

Borri, Antonio, Castori, Giulio and Corradi, Marco (2010) Mechanical behaviour of brick masonry arches strengthened by GFRP sheet and CFRP plates. In: 8th International Masonry Conference, 4 - 7 July 2010, Dresden, Germany.

Borri, Antonio, Castori, Giulio, Corradi, Marco and Giannantoni, Andrea (2010) Seismic upgrading works carried out with composite materials on historic constructions. Civil-Comp Proceedings: 93. p. 234. ISSN 1759-3433

Borri, Antonio, Castori, Giulio, Corradi, Marco, Giannantoni, Andrea and Speranzini, Emanuela (2010) Strength of masonry walls before and after reinforcement. In: 13th Structural Faults and Repair, 15 - 17 June 2010, Edinburgh, Scotland.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2010) Reinforcement of Historic Masonry with High Strength Steel Cords. Masonry International, 23 (3). pp. 79-90. ISSN 0950-2289

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2010) A reinforced repointing grid for strengthening historic stone masonry walls. In: 8th International Masonry Conference 2010 in Dresden. International Masonry Society, pp. 1851-1860.

Burluka, Alexey, Harker, Mark, Osman, H., Sheppard, C. G. W. and Konnov, A. A. (2010) Laminar burning velocities of three C3H6O isomers at atmospheric pressure. Fuel, 89 (10). pp. 2864-2872. ISSN 0016-2361

C

Cheung, Wai Ming (2010) Integrated Product and Process Design and Development: The Product Realization Process. International Journal of Production Research, 48 (12). pp. 3713-3714. ISSN 0020-7543

Chiang, Ming-Feng, Ghassemlooy, Zabih, Ng, Wai Pang, Le Minh, Hoa and Abd El Aziz, Ahmad (2010) Simulation of an all-optical 1 x 2 SMZ switch with a high contrast ratio. The Mediterranean Journal of Electronics and Communications, 6 (2). pp. 58-64. ISSN 1744-2400

Crapper, Martin, Ellis, Ruth and Furber, Alison (2010) Improving the case-based reasoning prediction of the compliance of treated effluent from constructed wetlands. Civil Engineering and Environmental Systems, 27 (2). pp. 123-132. ISSN 1028-6608

Cui, Bai, Sa, Rafael, Jayaseelan, Daniel, Inam, Fawad, Reece, Michael and Lee, William Edward (2010) Microstructural evolution during high-temperature oxidation of Ti2AlN ceramics. Advances in Science and Technology, 65. pp. 106-111. ISSN 1662-0356

D

Dawood, Nashwan, Benghi, Claudio, Sanches, Romeu and Chavada, Rajiv (2010) An interactive lean system for resource planning of earthwork operations. In: IGLC18: 18th International Group for Lean Construction Conference, 14-16 July 2010, Haifa, Israel.

Downie, Mary-Lou and Robson, Gill (2010) Valuers and automated valuation models. In: RICS North East CPD Day Conference, 10 February 2010, Newcastle Civic Centre, Newcastle upon Tyne.

E

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2010) Mitigation of vehicle collision with the aid of vehicle dynamic control systems. In: Proceedings of the 7th International Conference on Engineering Computational Technology. Civil-Comp Press. ISBN 9781905088393

Elmarakbi, Ahmed (2010) Analysis of a new front-end structure offset impact: mass-spring-damper models with piecewise linear characteristics. International Journal of Vehicle Systems Modelling and Testing, 5 (4). pp. 292-311. ISSN 1745-6436

Elmarakbi, Ahmed and Fielding, Niki (2010) Deformation and Energy Absorption Characteristics of Thin-Walled Structures. In: IMECE 2009 - ASME 2009 International Mechanical Engineering Congress and Exposition, 13th - 19th November 2009, Lake Buena Vista, FL, USA.

F

Fornell, Jordina, Gonzalez Sanchez, Sergio, Rossinyol, Emma, Suriñach, Santiago, Baró, Maria, Louzguine-Luzgin, Dimitri, Perepezko, John, Sort, Jordi and Inoue, Akihisa (2010) Enhanced mechanical properties due to structural changes induced by devitrification in Fe–Co–B–Si–Nb bulk metallic glass. Acta Materialia, 58 (19). pp. 6256-6266. ISSN 1359 6454

Fu, Yong Qing, Cherng, Jyh-Shiarn, Luo, Jikui, Desmulliez, Marc, Li, Yifan, Walton, Anthony and Placido, Frank (2010) Aluminium nitride thin film acoustic wave device for microfluidic and biosensing applications. In: Acoustic Waves. In Tech, Rijeka, pp. 263-298. ISBN 9789533071114

Fu, Yong Qing, Luo, Jikui, Du, X., Flewitt, Andrew, Li, Yifan, Markx, G., Walton, Anthony and Milne, William (2010) Recent developments on ZnO films for acoustic wave based bio-sensing and microfluidic applications: a review. Sensors and Actuators B: Chemical, 143 (2). pp. 606-619. ISSN 0925-4005

Fu, Yong Qing, Shearwood, Christopher, Xu, Ben, Yu, L. G. and Khor, Khiam Aik (2010) Characterization of spark plasma sintered Ag nanopowders. Nanotechnology, 21 (11). p. 115707. ISSN 0957-4484

G

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2010) Large plasticity of a Mg42Li23Cu25Y10 multiphase composite. In: 2nd WPI Annual Workshop, 25-27 March 2010, Sendai, Japan.

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2010) Mechanical properties of Mg–Li–Cu–Y metallic glass composites. Journal of Alloys and Compounds, 504 (S1). S114-S116. ISSN 0925 8388

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2010) Novel Mg46Li19Cu25Y10 multiphase composite containing amorphous and ductile phase. Intermetallics, 18 (5). pp. 859-863. ISSN 0966 9795

Gonzalez Sanchez, Sergio, Pérez, Pablo, Garcés, Gerardo and Adeva, Paloma (2010) Devitrification of rapidly solidified amorphous Mg–Ni–Y–LaMM ribbons. Intermetallics, 18 (4). pp. 710-718. ISSN 0966 9795

Gonzalez Sanchez, Sergio, Sort, Jordi, Louzguine-Luzgin, Dimitri, Perepezko, J. H., Baró, Maria and Inoue, Akihisa (2010) Tuning the microstructure and mechanical properties of Al-based amorphous/crystalline composites by addition of Pd. Intermetallics, 18 (12). pp. 2377-2384. ISSN 0966 9795

Greenwood, David, Lewis, Simon and Lockley, Steve (2010) Contractual issues in the total use of building information modelling. In: 18th CIB World Building Congress, 10-13 May 2010, Salford.

Greenwood, David, Lockley, Steve, Malsane, S. and Matthews, Jane (2010) Automated compliance checking using building information models. In: RICS COBRA 2010 Conference, 2-3 September, Paris.

Greenwood, David, Lockley, Steve, Malsane, Sagar and Matthews, Jane (2010) Automated compliance checking using building information models. In: The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors [Held at Dauphine Université, Paris, 2-3 September 2010]. RICS, London. ISBN 978-1-84219-619-9

I

Ibrahim, Rahinah and Rahimian, Farzad Pour (2010) Comparison of CAD and manual sketching tools for teaching architectural design. Automation in Construction, 19 (8). pp. 978-987. ISSN 0926-5805

Inam, Fawad, Heaton, Andrew, Brown, Peter, Peijs, Ton and Reece, Michael (2010) Effect of dispersant surfactants on the properties of alumina-carbon nanotubes nanocomposites. In: 12th International Ceramics Congress, CIMTEC 2010, 6-11 June, 2010, Montecatini Terme, Italy.

Inam, Fawad and Reece, Michael (2010) Nanostructured armour materials. In: Defence Ceramics Network Seminar (DCERN-4), 28 April 2010, Cranfield University, Swindon, UK.

Inam, Fawad and Reece, Michael (2010) Texturing in silicon carbide nanocomposites by Spark Plasma Sintering. In: Defence Ceramics Network Seminar (DCERN-5), 22 September 2010, University of Surrey, Guildford.

Inam, Fawad, Wong, Doris, Kuwata, Manabu and Peijs, Ton (2010) Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers. Journal of Nanomaterials, 2010. p. 453420. ISSN 1687-4110

Inam, Fawad, Yan, Haixue, Jayaseelan, Daniel, Peijs, Ton and Reece, Michael (2010) Electrically conductive alumina–carbon nanocomposites prepared by Spark Plasma Sintering. Journal of the European Ceramic Society, 30 (2). pp. 153-157. ISSN 0955-2219

Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2010) The sintering and grain growth behaviour of ceramic–carbon nanotube nanocomposites. Composites Science and Technology, 70 (6). pp. 947-952. ISSN 0266-3538

Inam, Fawad, Yan, Haixue, Reece, Michael and Peijs, Ton (2010) Structural and chemical stability of multiwall carbon nanotubes in sintered ceramic nanocomposite. Advances in Applied Ceramics, 109 (4). pp. 240-247. ISSN 1743-6753

Inam, Fawad, Yan, Haixue, Tu, Wei and Reece, Michael (2010) Sparking advanced ceramics. Materials World, 18 (5). pp. 26-28. ISSN 0967-8638

J

Jackson, Heather, Jayaseelan, Daniel, Clegg, William, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti and Lee, William Edward (2010) Microstructure of laser-melted zirconium carbide ceramics. In: Advances in Materials Science for Environmental and Nuclear Technology. Ceramic Transactions, 222 . Wiley, Hoboken, pp. 113-125. ISBN 978-0-470-92729-8

Jewers, Sam, Lumsden, Sarah, Crapper, Martin, French, Wendy, Lothian, Aileen, Donald, Ross, Hill, David and Hall, Alex (2010) Education for Sustainable Development and Civil Engineering for Children: Interactive Model Case Study. Journal of Professional Issues in Engineering Education and Practice, 136 (3). pp. 165-174. ISSN 1052-3928

K

Kassem, Mohamad, Dawood, Nashwan, Benghi, Claudio, Siddiqui, Mohsin and Mitchell, Donald (2010) Coordinaton and visualization of distributed schedules in the construction supply chain: A potential solution. In: CONVR 2010:10th International Conference on Construction Applications of Virtual Reality 2010, 4-5 November 2010, Sendai, Japan.

Kim, Hando, Benghi, Claudio, Dawood, Nashwan, Jung, Doyoung, Kim, Jaehong and Baek, Yeongin (2010) Developing 5D system connecting cost, schedule and 3D model. In: IABSE Symposium Symposium on Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, 22-24 September 2010, Venice, Italy.

Kuleshov, Andrei, Kozlov, Andrey and Mahkamov, Khamid (2010) Self-Ignition delay prediction in PCCI direct injection diesel engines using multi-zone spray combustion model and detailed chemistry. In: SAE 2010 Commercial Vehicle Engineering Congress, 5 Otober 2010, Chicago, Illinois, USA.

L

Lim, Chin, Airoldi, Giovanni, Bumby, Jim, Dominy, Robert, Ingram, Grant, Mahkamov, Khamid, Brown, Neil, Mebarki, Abdeslam and Shanel, Martin (2010) Experimental and CFD investigation of a lumped parameter thermal model of a single-sided, slotted axial flux generator. International Journal of Thermal Sciences, 49 (9). pp. 1732-1741. ISSN 1290-0729

Lomas, Kevin, Bell, Margaret, Firth, Steven, Gaston, Kevin, Goodman, P., Leake, J. R., Namdeo, Anil, Rylatt, Mark, Allinson, David, Davies, Zoe, Edmondson, Jill, Galatioto, F., Guo, L., Hill, Graeme, Irvine, Katherine, Taylor, S. C. and Tiwary, Abhishek (2010) 4M: measurement; modelling; mapping and management - the carbon footprint of UK cities. In: Proceedings of Low Carbon Cities. Low Carbon Cities. International Society of City and Regional Planners (ISOCARP), The Hague, pp. 168-191.

M

Maheri, Alireza and Daadbin, Ali (2010) High performance finite element analysis of composite aeroelastic structures. In: High Performance Structures and Materials V. WIT transactions on the built environment, 112 . WIT Press, Southampton, UK, pp. 15-26. ISBN 978-1845644642

Maheri, Alireza and Isikveren, Askin (2010) Performance prediction of wind turbines utilizing passive smart blades: approaches and evaluation. Wind Energy, 12 (2/3). pp. 255-265. ISSN 1095-4244

McDowell, Liz, Penlington, Roger and Tudor, Jenna (2010) Initial findings of a mixed methods investigation into students’ perceptions and approaches towards learning. Practice and Evidence of the Scholarship of Teaching and Learning in Higher Education, 5 (2). pp. 75-97. ISSN 1750-8428

N

Narayana, Mahinsasa, Putrus, Ghanim and McDonald, Stephen (2010) Identification of control signals for optimal control of small-scale wind turbines. In: WECS 2010 (Wind Energy Chapter Symposium), 15th - 16th April 2010, Stafford, UK.

Niroomandi, Arsalan, Maheri, Alireza, Maheri, Mahmoud and Mahini, Saeed (2010) Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets. Engineering Structures, 32 (8). pp. 2326-2336. ISSN 0141-0296

O

Ojiako, Udechukwu, Greenwood, David and Johansen, Eric (2010) Re-defining project failure in converged and multi-dimensional telecommunications ICT projects. Communications Network Journal, 5 (3). pp. 23-28. ISSN 1477-4739

Ojiako, Udechukwu, Maguire, Stuart, Koh, Lenny, Grainger, Tracey and Wainwright, David (2010) Softer perspectives on enhancing the patient experience using IS/IT. International Journal of Health Care Quality Assurance, 23 (2). pp. 187-208. ISSN 0952-6862

P

Patel, Bhairav, Edirisinghe, Mohan, Inam, Fawad, Reece, Michael, Bonfield, William, Huang, Jie and Angadji, Arash (2010) A novel route for processing Co-Cr-Mo orthopaedic alloys. In: The 23d Annual Congress of the International Society for Technology in Anthroplasty (ISTA 2010), 6-9 October 2010, Intercontinental Hotel, Dubai, UAE.

Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2010) A novel route for processing cobalt-chromium-molybdenum orthopaedic alloys. Journal of The Royal Society Interface, 7 (52). pp. 1641-1645. ISSN 1742-5689

R

Rahimian, Farzad Pour and Goulding, Jack (2010) Game-like virtual reality interfaces in construction management simulation: a new paradigm of opportunities. In: Proceedings of the 9th International Design in Architecture Conference 2010. University of Central Lancashire, pp. 247-255. ISBN 9781901922769

Richardson, Alan (2010) Durability performance tests. In: Concrete Durability: A practical guide to the design of durable concrete structures. Thomas Telford, London, pp. 108-123. ISBN 9780727735171

Richardson, Alan, Allain, Pierre and Veuille, Maxime (2010) Concrete with crushed, graded and washed recycled construction demolition waste as a coarse aggregate replacement. Structural Survey, 28 (2). pp. 142-148. ISSN 0263-080X

Richardson, Alan and Coventry, Kathryn (2010) Early life freeze/thaw durability of Type 1 polypropylene fibre and ground granulated blast furnace slag concretes. In: Second International Conference on Sustainable Construction Materials and Technologies, 28-30 June 2010, Università Politecnica delle Marche, Ancona, Italy.

Richardson, Alan, Coventry, Kathryn and Landless, Sean (2010) Synthetic and steel fibres in concrete with regard to equal toughness. Structural Survey, 28 (5). pp. 355-369. ISSN 0263-080X

Richardson, Alan and McIntyre, Chris (2010) The Effect of Fibre Concrete on the Ultimate Pull Out force of Anchor Bolts. Concrete, 44 (8). p. 48. ISSN 0010-5317

S

Shyha, Islam (2010) On-going experimental work when twist drilling of CFRP and titanium/CFRP/aluminium stacks used in the aerospace industry. In: CIRP January Meeting 2010 – STC C, 20-22 January 2010, Paris, France.

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2010) Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. Journal of Materials Processing Technology, 210 (8). pp. 1023-1034. ISSN 0924-0136

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Dawson, Stuart and Pretorius, Cornelius (2010) Drilling of titanium/CFRP/aluminium stacks. Key Engineering Materials, 447 (624). pp. 624-633. ISSN 1013-9826

Speranzini, Emanuela, Corradi, Marco, Giannantoni, Andrea and Borri, Antonio (2010) Consolidation and reinforcement of stone walls using a reinforced repointing grid. In: Structural Analysis of Historic Construction: Preserving Safety and Significance. CRC Press, Boca Raton, FL, pp. 981-989. ISBN 978-0-415-46872-5

Swinburne, Jonathan, Udeaja, Chika and Tait, Neil (2010) Measuring material wastage on construction sites: a case study of local authority highway projects. Built and Natural Environment Research Papers. ISSN 1756-2473

T

Tan, Hai Chen, Anumba, Chimay, Carrillo, Patricia, Bouchlaghem, Dino, Kamara, John and Udeaja, Chika (2010) Capture and Reuse of Project Knowledge in Construction. Wiley-Blackwell, Oxford. ISBN 978-1405198899

Tiwary, Abhishek and Colls, Jeremy (2010) Mitigating secondary aerosol generation potentials from biofuel use in the energy sector. Science of the Total Environment, 408 (3). pp. 607-616. ISSN 0048-9697

Tiwary, Abhishek, Namdeo, Anil and Bell, M. C. (2010) Secondary aerosol generation potential in an urban environment from a biofuel based decentralised electricity production plant: assessment and mitigation. In: UEP 2010 - Urban Environmental Pollution Conference, 20-23 June 2010, Boston.

V

Velthof, G. L., Hoving, I. E., Dolfing, Jan, Smit, A., Kuikman, P. J. and Oenema, O. (2010) Method and timing of grassland renovation affects herbage yield, nitrate leaching, and nitrous oxide emission in intensively managed grasslands. Nutrient Cycling in Agroecosystems, 86 (3). pp. 401-412. ISSN 1385-1314

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear analysis of thin-walled open-section composite beams. Computers & Structures, 88 (5-6). 347 - 356. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear theory of thin-walled composite box beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 52 (1). 65 - 74. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2010) Interaction curves for vibration and buckling of thin-walled composite box beams under axial loads and end moments. International Journal of Mechanical Sciences, 34 (10). 3142 - 3157. ISSN 0020-7403

Vo, Thuc, Lee, Jaehong and Lee, Kihak (2010) On triply coupled vibrations of axially loaded thin-walled composite beams. Computers & Structures, 88 (3-4). 144 - 153. ISSN 0045-7949

W

Waggott, Andrew, Walker, Sara and Theobald, Kate (2010) Monitoring useful solar fraction in retrofitted social housing. In: CIB World Building Conference, 10-13 May 2010, Salford University.

Walker, A., Greenwood, David and Johansen, Eric (2010) Facets of the Integrated Design Approach and their Impact on Design Quality in UK Schools. In: 26th Annual Conference of the Association of Researchers in Construction Management, 6-8 September 2010, Leeds.

Walker, Alan, Greenwood, David and Johansen, Eric (2010) User engagement and quality in the design of UK schools. In: Proceedings of 26th Annual ARCOM Conference. Association of Researchers in Construction Management (ARCOM), Reading, pp. 3-12. ISBN 978-0955239045

Walton, Anthony, Stevenson, Tom, Underwood, Ian, Terry, Jonathan, Smith, S., Parkes, William, Dunare, Camelia, Lin, H., Li, Yifan, Henderson, Robert, Renshaw, David, Rae, Bruce, Muir, K., Desmulliez, Marc, Flynn, David, MacIntosh, Mike, Holland, Wayne, Murray, Alan, Tang, Tong Boon and Bunting, Andrew (2010) Silicon+-post processing CMOS wafers to create integrated sensors, MEMS and electro-optic systems. SAIEE Research Journal, 10 (1). pp. 3-10. ISSN 1991-1696

Wong, Ing Liang, Perera, Srinath and Eames, Philip (2010) Goal directed life cycle costing as a method to evaluate the economic feasibility of office buildings with conventional and TI‐façades. Construction Management and Economics, 28 (7). pp. 715-735. ISSN 0144-6193

Wu, Hongwei, Tassou, S. A., Jouhara, H. and Karayiannis, T. G. (2010) Analysis of energy use in crisp frying processes. In: The 4th International Conference on Sustainable Energy & Environmental Protection, 29 June - 2 July 2010, BARI, Italy.

Wu, Shuwei (2010) The impact of collaborative working on construction project performance. Doctoral thesis, Northumbria University.

X

Xu, Ben and Fu, Yong Qing (2010) Nano carbon filled smart materials: electrical, micro/nano mechanical properties and Nano-fabrication technique with FIB. In: ThinFilms2010, 11-14 July 2010, Harbin, China.

Xu, Ben, Fu, Yong Qing, Ahmad, Manzoor, Luo, Jikui, Huang, Wei Min, Kraft, Arno, Reuben, Robert, Pei, Yu Tao, Chen, Zhen Guo and de Hosson, Jeff (2010) Thermo-mechanical properties of polystyrene-based shape memory nanocomposites. Journal of Materials Chemistry, 20 (17). pp. 3442-3448. ISSN 0959-9428

Xu, Ben, Fu, Yong Qing, Huang, Wei Min, Pei, Yu Tao, Chen, Zhen Guo, de Hosson, Jeff, Kraft, Arno and Reuben, Robert (2010) Thermal-mechanical properties of polyurethane-clay shape memory polymer nanocomposites. Polymers, 2 (2). pp. 31-39. ISSN 2073-4360

Z

Ziouziou, Sammy and Moehler, Robert (2010) Neue Vertriebsstrukturen sind gefordert: Distributionspolitik in der Bauwirtschaft. Baumarkt & Bauwirtschaft, 109 (9). pp. 40-42. ISSN 0341-2717

Ziouziou, Sammy, Moehler, Robert and Murdoch, Ian (2010) Strategic considerations for construction in the People’s Republic of China: the case of German contractors in the 1990s. Built and Natural Environment Research Papers, 3 (1). pp. 56-63. ISSN 1756-2473

This list was generated on Tue Dec 10 21:47:18 2024 UTC.