Items where Subject is "J200 Metallurgy"

C

Corradi, Marco, Speranzini, Emanuela and Alessio, Molinari (2022) A repair method of cracked shear walls with stainless steel. Composite Structures, 293. p. 115739. ISSN 0263-8223

D

Daoush, Walid, Park, Hee Sup, Inam, Fawad, Lim, Byung Kyu and Hong, Soon Hyung (2015) Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering. Metallurgical and Materials Transactions A, 46 (3). pp. 1385-1393. ISSN 1073-5623

Dissanayake Mudiyanselage, Madhushan, Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, Konstantinos D., Nagaratnam, B. and Wanniarachchi, K.S. (2020) Numerical modelling and shear design rules of stainless steel lipped channel sections. Journal of Constructional Steel Research, 168. p. 105873. ISSN 0143-974X

Distler, Petr, Stamberg, Karel, John, Jan, Harwood, Laurence and Lewis, Frank (2018) Modelling of the Am(III) - Cm(III) kinetic separation effect observed during metal ion extraction by bis-(1,2,4)-triazine ligands. Separation Science and Technology, 53 (2). pp. 277-285. ISSN 0149-6395

Dong, Longlong, Ahangarkani, Meysam, Zhang, Weihua, Zhang, Baochang, Chen, W. G., Fu, Yong Qing and Zhang, Y. S. (2018) Formation of gradient microstructure and mechanical properties of hot-pressed W-20 wt% Cu composites after sliding friction severe deformation. Materials Characterization, 144. pp. 325-335. ISSN 1044-5803

E

El-Sayed, Mahmoud Ahmed, Shyha, Islam and Basuny, Fawzia Hamed (2018) Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review. Journal of Engineering Technology, 6. pp. 225-244.

F

Fleming, William (2006) Prediction of the fatigue of metal matrix composites using theory of cells. Doctoral thesis, Northumbria University.

Fu, Yong Qing, Yanwei, Gu, Xiaotian, Jing, Mulin, Hu and Bingzhe, Lou (1995) New method to evaluate fracture toughness of case-hardened steel. International Journal of Fracture, 71 (4). R71-R76. ISSN 0376-9429

G

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

I

Inam, Fawad, Farooq, Muhammad and Shahid, Muhammad (2005) Designing of a solar-powered cathodic protection system for a ~50 km long buried natural gas pipeline located in Sindh, Pakistan. In: 9th International Symposium on Advanced Materials (ISAM 2005), 19-22 September, 2005, Islamabad, Pakistan.

Inam, Fawad and Wadood, Abdul (2002) Characterization of Hastelloy C-276. In: 3rd International and 13th National Chemistry Conference, 28-31 December 2002, University of Karachi, Karachi, Pakistan.

L

Lewis, Frank, Harwood, Laurence, Hudson, Michael, Afsar, Ashfaq, Laventine, Dominic, St'astna, Kamila, John, Jan and Distler, Petr (2018) Separation of the Minor Actinides Americium(III) and Curium(III) by Hydrophobic and Hydrophilic BTPhen ligands: Exploiting Differences in their Rates of Extraction and Effective Separations at Equilibrium. Solvent Extraction and Ion Exchange, 36 (2). pp. 115-135. ISSN 0736-6299

Lewis, Frank, Harwood, Laurence, Hudson, Michael, Mullich, Udo and Geist, Andreas (2015) Efficient Masking of Corrosion and Fission Products such as Ni(II) and Pd(II) in the Presence of the Minor Actinide Am(III) using Hydrophilic Anionic or Cationic Bis-Triazines. Chemical Communications, 51 (44). pp. 9189-9192. ISSN 1359-7345

Lewis, Frank, Harwood, Laurence, Hudson, Michael, Núñez, Ana, Galán, Hitos and Espartero, Amparo (2016) Synthesis and Evaluation of a Novel Hydrophilic 6,6’-Bis(1,2,4-triazin-3-yl)-2,2’-bipyridine Ligand for Separating Actinide(III) from Lanthanide(III). Synlett, 27 (01). pp. 1-5. ISSN 0936-5214

M

Molokov, Sergei, El, Gennady and Lukyanov, Alexander (2011) Classification of instability modes in a model of aluminium reduction cells with a uniform magnetic field. Theoretical and Computational Fluid Dynamics, 25 (5). pp. 261-279. ISSN 0935-4964

O

Omotosho, Emmanuel Olubambi (2023) Studies on dynamic behaviours of magnetic shape memory single crystal NiMnGa alloys for actuator applications. Doctoral thesis, Northumbria University.

P

Patel, Bhairav, Edirisinghe, Mohan, Inam, Fawad, Reece, Michael, Bonfield, William, Huang, Jie and Angadji, Arash (2012) A novel route for processing Co-Cr-Mo orthopaedic alloys. Journal of Bone & Joint Surgery, British Volume, 94-B (S_XXV). p. 182. ISSN 0301-620X

Patel, Bhairav, Favaro, Gregory, Inam, Fawad, Reece, Michael, Angadji, Arash, Bonfield, William, Huang, Jie and Edirisinghe, Mohan (2012) Cobalt-based orthopaedic alloys: Relationship between forming route, microstructure and tribological performance. Materials Science and Engineering: C, 32 (5). pp. 1222-1229. ISSN 0928-4931

Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2010) A novel route for processing cobalt-chromium-molybdenum orthopaedic alloys. Journal of The Royal Society Interface, 7 (52). pp. 1641-1645. ISSN 1742-5689

R

Richardson, Alan (2013) Re-use of materials and by-products in construction, waste minimisation and re-cycling. Green Energy and Technology . Springer, London. ISBN 978-1447153764

T

Teng, Xiangyu, Chen, Wanqun, Huo, Dehong, Shyha, Islam and Lin, Chao (2018) Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures, 203. pp. 636-647. ISSN 0263-8223

V

Villapún Puzas, Victor Manuel, Medina, Judith, Pérez, Pablo, Esat, Faye, Inam, Fawad and Gonzalez Sanchez, Sergio (2017) Strategy for preventing excessive wear rate at high loads in bulk metallic glass composites. Materials & Design, 135. pp. 300-308. ISSN 0264-1275

Z

Zhang, Hong, Gao, Bin, Tian, Gui Yun, Woo, Wai Lok and Bai, Libing (2013) Metal defects sizing and detection under thick coating using microwave NDT. NDT & E International, 60. pp. 52-61. ISSN 0963-8695

Zhou, Ying, Chen, Xiao-Min and Qin, Sheng-feng (2019) A Strain-Compensated Constitutive Model for Describing the Hot Compressive Deformation Behaviors of an Aged Inconel 718 Superalloy. High Temperature Materials and Processes, 38 (2019). pp. 436-443. ISSN 0334-6455