Items where Author is "Haider, Julfikar"

Article

Khan, Fahd, Daadbin, Ali, Persson, Martin and Haider, Julfikar (2014) Development of AlTiN coated carbide bandsaw for machining titanium-17 alloy. International Journal of Surface Science and Engineering, 8 (1). pp. 11-27. ISSN 1749-7868

Khan, Fahd, Daadbin, Ali, Persson, Martin, Haider, Julfikar and Hellbergh, Hakan (2012) Assessing the performance of TiAlSiN coating on bandsaw tooth when cutting Ti-17 alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (5). pp. 870-877. ISSN 0954-4054

Sarwar, Mohammed, Dinsdale, Mike and Haider, Julfikar (2012) Development of advanced broaching tool for machining titanium alloy. Advanced Materials Research, 445. pp. 161-166. ISSN 1662-8985

Haider, Julfikar and Sarwar, Mohammed (2012) Selection of advanced coating on a milling cutter used for manufacturing saw teeth. International Journal of Surface Science and Engineering, 6 (1/2). pp. 45-58. ISSN 1749-785X

Sarwar, Mohammed and Haider, Julfikar (2011) Characteristics and Machining Performance of TiN and TiAlN Coatings on a Milling Cutter. AIP conference proceedings, 1315. pp. 1005-1010. ISSN 0094-243X

Haider, Julfikar, Hashmi, Mohammed, Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) New generation of MoSx based solid lubricant coatings: recent developments and applications. AIP conference proceedings, 1315. pp. 1365-1370. ISSN 0094-243X

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2010) Forces, wear modes and mechanisms in bandsawing steel workpieces. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 224 (11). pp. 155-162. ISSN 0954-4054

Sarwar, Mohammed and Haider, Julfikar (2010) Aspects of burr formation in bandsaw teeth manufactured by milling operation. Robotics and Computer-Integrated Manufacturing, 26 (6). pp. 596-601. ISSN 0736-5845

Haider, Julfikar and Hashmi, Mohammed (2010) Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process. Advanced Materials Research, 83-86. pp. 977-984. ISSN 1022-6680

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2009) Measurement of specific cutting energy for evaluating the efficiency of bandsawing different workpiece materials. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 958-965. ISSN 0890-6955

Haider, Julfikar, Rahman, Mahfujur, Hashmi, Mohammed and Sarwar, Mohammed (2008) Investigating the wear characteristics of engineered surfaces : low-temperature plasma nitriding and TiN + MoS x hard-solid lubricant coating. Journal of Materials Science, 43 (10). ISSN 0022-2461

Sarwar, Mohammed and Haider, Julfikar (2008) Development of advanced surface engineering technologies for the benefit of multipoint cutting tools. Advanced Materials Research. pp. 1043-1050. ISSN 1022-6680

Book Section

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2012) Performance evaluation of bandsaw using scientific method when cutting tool steels. In: Proceedings of the 37th International Matador Conference. Springer, London, pp. 209-212.

Conference or Workshop Item

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin, Hellbergh, Hakan, Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) Material behavior at the extreme cutting edge in bandsawing. In: AMPT 2010 International conference on advances in materials and processing technologies, 24-27 October 2010, Paris, France.

Sarwar, Mohammed and Haider, Julfikar (2009) Investigating the performance of TiN and TiAIN coatings on milling cutter used for machining bimetal steel strip. In: 36th International Conference on Metallurgic Coatings and Thin Films (ICMCTF 2009), 28 - 29 April 2009, San Diego, California.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Characteristics of tool cutting edges for coatability. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Evaluating the performance of TiN coating on a PM HSS milling cutter used in manufacturing of bandsaws. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Haider, Julfikar and Hashmi, Mohammed (2008) Improving the deposition rate of multicomponent coating by controlling substrate table rotation in a magnetron sputtering process. In: International Conference on Advances in Materials and Processing Technologies (AMPT 2008), 2-5 November 2008, Bahrain.

Sarwar, Mohammed and Haider, Julfikar (2008) Introducing lean, not mean, to improve productivity in a cutting tool manufacturing company. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), 30 June - 2 July 2008, Skövde.