Items where Author is "Sarwar, Mohammed"

Susilawati, Anita, Tan, John, Bell, David and Sarwar, Mohammed (2015) Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34. pp. 1-11. ISSN 0278 6125

Sarwar, Mohammed, Dinsdale, Mike and Haider, Julfikar (2012) Development of advanced broaching tool for machining titanium alloy. Advanced Materials Research, 445. pp. 161-166. ISSN 1662-8985

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2012) Performance evaluation of bandsaw using scientific method when cutting tool steels. In: Proceedings of the 37th International Matador Conference. Springer, London, pp. 209-212.

Haider, Julfikar and Sarwar, Mohammed (2012) Selection of advanced coating on a milling cutter used for manufacturing saw teeth. International Journal of Surface Science and Engineering, 6 (1/2). pp. 45-58. ISSN 1749-785X

Susilawati, Anita, Tan, John, Bell, David and Sarwar, Mohammed (2011) Assessing lean manufacturing activity in Indonesian Industries. In: ACIKITA International Conference of Science and Technology (AICST), 26-27 July 2011, Jakarta.

Sarwar, Mohammed and Haider, Julfikar (2011) Characteristics and Machining Performance of TiN and TiAlN Coatings on a Milling Cutter. AIP conference proceedings, 1315. pp. 1005-1010. ISSN 0094-243X

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin, Hellbergh, Hakan, Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) Material behavior at the extreme cutting edge in bandsawing. In: AMPT 2010 International conference on advances in materials and processing technologies, 24-27 October 2010, Paris, France.

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2010) Forces, wear modes and mechanisms in bandsawing steel workpieces. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 224 (11). pp. 155-162. ISSN 0954-4054

Sarwar, Mohammed and Haider, Julfikar (2010) Aspects of burr formation in bandsaw teeth manufactured by milling operation. Robotics and Computer-Integrated Manufacturing, 26 (6). pp. 596-601. ISSN 0736-5845

Aresh, Balaji, Daadbin, Ali and Sarwar, Mohammed (2010) Investigation into rock mechanics using finite element method. In: ISRM International Symposium - 6th Asian Rock Mechanics Symposium, 23-27 October 2010, New Delhi, India.

Nawaz Kahn, Fahd, Sarwar, Mohammed and Persson, Martin (2009) Cutting energy and wear in bandsawing operation when cutting Ti-6AI-4V alloy. In: International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2009), 6-8 July 2009, University of Teeside, Middlesborough, United Kingdom.

Sarwar, Mohammed and Haider, Julfikar (2009) Investigating the performance of TiN and TiAIN coatings on milling cutter used for machining bimetal steel strip. In: 36th International Conference on Metallurgic Coatings and Thin Films (ICMCTF 2009), 28 - 29 April 2009, San Diego, California.

Sarwar, Mohammed, Persson, Martin, Hellbergh, Hakan and Haider, Julfikar (2009) Measurement of specific cutting energy for evaluating the efficiency of bandsawing different workpiece materials. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 958-965. ISSN 0890-6955

Haider, Julfikar, Rahman, Mahfujur, Hashmi, Mohammed and Sarwar, Mohammed (2008) Investigating the wear characteristics of engineered surfaces : low-temperature plasma nitriding and TiN + MoS x hard-solid lubricant coating. Journal of Materials Science, 43 (10). ISSN 0022-2461

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Characteristics of tool cutting edges for coatability. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed and Haider, Julfikar (2008) Development of advanced surface engineering technologies for the benefit of multipoint cutting tools. Advanced Materials Research. pp. 1043-1050. ISSN 1022-6680

Sarwar, Mohammed, Haider, Julfikar, Persson, Martin and Hellbergh, Hakan (2008) Evaluating the performance of TiN coating on a PM HSS milling cutter used in manufacturing of bandsaws. In: 3rd International Conference on Surface Coatings and Nanostructured Materials (NanoSMat 2008), 21-24 October 2008, Barcelona, Spain.

Sarwar, Mohammed and Haider, Julfikar (2008) Introducing lean, not mean, to improve productivity in a cutting tool manufacturing company. In: 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008), 30 June - 2 July 2008, Skövde.

Sarwar, Mohammed, Persson, Martin and Hellbergh, Hakan (2007) Wear of the cutting edge in the bandsawing operation when cutting austentic 17-7 stainless steel. Wear, 263 (7-12). pp. 1438-1441. ISSN 0043-1648

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2006) Product Enhancement with a systems approach, utilising Time Compression Technologies. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip and Sarwar, Mohammed (2006) Rapid Manufacturing of Polymer Injection Mould Tool Inserts for Prototype Tooling Production. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Implementing Time Compression Technologies to Assist Small to Medium Size Enterprises for Product Development. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Reverse Engineering – Speeds up manufacture of thermoforming tools. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2005) Wear and failure modes in the bandsawing operation when cutting ball-bearing steel. Wear, 259 (7-12). pp. 1144-1150. ISSN 0043-1648

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2004) Wear of high speed steel bi-metal bandsaw blade when cutting avesta polarit 17-7 stainless steel in the as-cast state. Materials Science Forum. pp. 431-437. ISSN 0255-5476

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2004) Wear and failure of high-speed steel bimetal bandsaws when cutting ball-bearing steel. In: 34th International MATADOR Conference, 7-9 July 2004, Manchester.

Hackney, Philip and Sarwar, Mohammed (2003) An Evaluation of Rapid Prototyping “Concept Modelling” Techniques for New Product Development. In: 13th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2003), 18th June 2003, Tampa.

Sarwar, Mohammed and Armitage, A. (2003) Tooling requirements for glass container production for the narrow neck press and blow process. Journal of Materials Processing Technology, 139 (1-3). pp. 160-163. ISSN 0924-0136

Sarwar, Mohammed, Hellbergh, Hakan, Doraisingam, Anand Raj and Persson, Martin (2002) Simulation of the intermittent cutting action of a bandsaw blade. Technical Report. Society of Manufacturing Engineers.

Hackney, Philip and Sarwar, Mohammed (2001) The Revolution of Mid-Range Low Cost 3D Solid Modellers to Small Engineering Companies within the UK. In: 11th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 16-18 July 2001, Dublin.

Sarwar, Mohammed, Leung, Pak Sing, Perera, Noel and Armitage, A. (2001) CFD modelling and heat transfer in a NNPB process. International Ceramics Journal, 21. pp. 33-38. ISSN 1123-8216

Sarwar, Mohammed, Leung, Pak Sing, Perera, Noel and Armitage, A. (2000) Mathematical modelling of the fluid flow in the NNPB plunger cooling system. International Glass Journal (107). pp. 26-29. ISSN 1123 5063

Sarwar, Mohammed (1998) Application of advanced surface engineering treatments to multi-point cutting edges. Surface and Coatings Technology, 108-9. pp. 612-619. ISSN 0257 8972

Sarwar, Mohammed, Zhang, X.-Y. and Gillibrand, D. (1997) Performance of titanium nitride-coated carbide-tipped circular saws when cutting stainless steel and mild steel. Surface and Coatings Technology, 94-95. pp. 617-621. ISSN 0257-8972

Hackney, Philip and Sarwar, Mohammed (1997) Getting started in Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip, Sarwar, Mohammed and Widdows, Stephen (1997) Spin casting of metal parts directly from RP masters. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip and Sarwar, Mohammed (1997) Thermal and Mechanical Characteristics of the Laminated Object Manufacturing Process used for Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Bradbury, Steve, Lewis, D. and Sarwar, Mohammed (1996) The effect of product quality on the integrity of advanced surface engineering treatments applied to high speed steel circular saw blades. Surface and Coatings Technology, 85 (3). pp. 215-220. ISSN 0257 8972

Lewis, D., Bradbury, Steve and Sarwar, Mohammed (1996) Analysis of the wear and failure mechanisms that develop in high speed steel circular saw blades when machining nickel-based alloys. Wear, 197 (1-2). pp. 74-81. ISSN 0043-1648

Lewis, D., Bradbury, Steve and Sarwar, Mohammed (1996) The effect of substrate surface preparation on the wear and failure modes of TiN coated high speed steel circular saw blades. Wear, 197 (1-2). pp. 82-88. ISSN 0043 1648

Penlington, Roger, Sarwar, Mohammed and Lewis, D. (1995) Application of advanced coatings to narrow neck press and blow plungers in the glass container industry. Surface and Coatings Technology, 76-77 (1). pp. 81-85. ISSN 0257-8972

Tither, D., Ahmed, W., Sarwar, Mohammed and Ahmed, E. (1995) Application of diamond-like carbon coatings deposited by plasma-assisted chemical vapour deposition onto metal matrix composites for two-stroke engine components. Journal of Materials Science Letters, 14 (15). pp. 1062-1064. ISSN 0261 8028