Items where Subject is "J400 Polymers and Textiles"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 122.

Article

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of 0.5 wt% multi-layer graphene/nanoclay reinforced epoxy nanocomposites. AIMS Materials Science, 3 (3). pp. 1266-1280. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2017) Fractography analysis of 1.0 wt% nanoclay/multi-layer graphene reinforced epoxy nanocomposites. Journal of Composite Materials, 51 (23). pp. 3281-3290. ISSN 0021-9983

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of monolithic epoxy with tailored topography. World Journal of Engineering and Technology, 4 (4). pp. 517-527. ISSN 2331-4249

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis with topographical features of multi-layer graphene reinforced epoxy nanocomposites. Graphene, 5 (4). pp. 166-177. ISSN 2169-3439

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on damage tolerance and fracture toughness of 0.1 wt % multi-layer graphene/clay-epoxy nanocomposites. Polymers, 8 (7). p. 239. ISSN 2073-4360

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on mechanical performance of 0.5 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. AIMS Materials Science, 3 (4). pp. 1294-1308. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2017) Influence of macro-topography on mechanical performance of 1.0 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. Journal of Composite Materials, 51 (19). pp. 2769-2778. ISSN 0021-9983

Atif, Rasheed and Inam, Fawad (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein Journal of Nanotechnology, 7. pp. 1174-1196. ISSN 2190-4286

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites - a review. Polymers, 8 (8). p. 281. ISSN 2073-4360

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Advances, 6 (41). pp. 34188-34197. ISSN 2046-2069

Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Constitutive modelling of ductile damage matrix reinforced by platelets-like particles with imperfect interfaces: Application to graphene polymer nanocomposite materials. Composites Part B: Engineering, 113. pp. 55-64. ISSN 1359-8368

Azoti, Wiyao, Elmarakbi, Ahmed, Hage, Hisham El and Elkady, Mustafa (2017) Elasto-plastic response of graphene nanoplatelets reinforced polymer composite materials. International Journal of Automotive Composites, 3 (2/3/4). pp. 226-236. ISSN 2051-8218

Bencsik, Martin, Adriaensen, Hans, Brewer, Stuart and McHale, Glen (2008) Quantitative NMR monitoring of liquid ingress into repellent heterogeneous layered fabrics. Journal of Magnetic Resonance, 193 (1). pp. 32-36. ISSN 1090-7807

Chen, Mingming, Blacklock, Matthew, Zhang, Daxu and Gong, Jinghai (2017) Effects of stochastic tow waviness on stiffness and strength of plain-weave ceramic matrix composites. Advances in Mechanical Engineering, 9 (8). p. 168781401772797. ISSN 1687-8140

Dai, Xingyi, Du, Yuzhang, Wang, Yansong, Liu, Yucong, Xu, Nianxi, Li, Yifan, Shan, Dongzhi, Xu, Bin and Kong, Jie (2020) Stretchable Self-Healing Polymeric Networks with Recyclability and Dual Responsiveness. ACS Applied Polymer Materials, 2 (3). pp. 1065-1072. ISSN 2637-6105

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2019) Additive manufacturing of polymer composites: Processing and modeling approaches. Composites Part B: Engineering, 171. pp. 166-182. ISSN 1359-8368

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2019) Modelling of the temperature and residual stress fields during 3D printing of polymer composites. International Journal of Advanced Manufacturing Technology, 104 (5-8). pp. 1661-1676. ISSN 0268-3768

Elmasry, Ahmed, Azoti, Wiyao, Elmarakbi, Mohab and Elmarakbi, Ahmed (2021) Interaction modelling of the thermomechanical behaviour of spatially-oriented graphene platelets (GPLs) reinforced polymer matrix. International Journal of Solids and Structures, 232. p. 111183. ISSN 0020-7683

Feng, Qizhi, Gao, Bin, Lu, Peng, Woo, Wai Lok, Yang, Yang, Fan, Yunchen, Qiu, Xueshi and Gu, Liangyong (2018) Automatic seeded region growing for thermography debonding detection of CFRP. NDT & E International, 99. pp. 36-49. ISSN 0963-8695

Freese, Silvia, Diraoui, Samar, Mateescu, Anca, Frank, Petra, Theodorakopoulos, Charis and Jonas, Ulrich (2019) Polyolefin-Supported Hydrogels for Selective Cleaning Treatments of Paintings. Gels, 6 (1). p. 1. ISSN 2310-2861

Guilpin, Antoine, Franciere, Geoffrey, Barton, Lewis, Blacklock, Matthew and Birkett, Martin (2019) A Numerical and Experimental Study of Adhesively-Bonded Polyethylene Pipelines. Polymers, 11 (9). p. 1531. ISSN 2073-4360

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Inam, Fawad, Bhat, Badekai Ramachandra, Luhyna, Nataliia and Vo, Thuc (2014) Comparison of structural health assessment capabilities in epoxy – carbon black and epoxy – carbon nanotube nanocomposites. Express Polymers Letters, 8 (1). pp. 55-61. ISSN 1788-618X

Inam, Fawad and Peijs, Ton (2006) Re-aggregation of carbon nanotubes in two-component epoxy system. Journal of Nanostructured Polymers and Nanocomposites, 2 (3). pp. 87-95. ISSN 1790-4439

Inam, Fawad and Peijs, Ton (2006) Transmission light microscopy of carbon nanotubes-epoxy nanocomposites involving different dispersion methods. Advanced Composites Letters, 15 (1). pp. 7-13. ISSN 0963-6935

Inam, Fawad, Reece, Michael and Peijs, Ton (2012) Shortened carbon nanotubes and their influence on the electrical properties of polymer nanocomposites. Journal of Composite Materials, 46 (11). pp. 1313-1322. ISSN 0021-9983

Inam, Fawad, Vo, Thuc, Jones, Jonathan and Lee, Xu (2013) Effect of carbon nanotube lengths on the mechanical properties of epoxy resin: an experimental study. Journal of Composite Materials, 47 (19). pp. 2321-2330. ISSN 0021-9983

Inam, Fawad, Wong, Doris, Kuwata, Manabu and Peijs, Ton (2010) Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers. Journal of Nanomaterials, 2010. p. 453420. ISSN 1687-4110

Inam, Fawad, Yan, Haixue, Zhang, Rui, Peijs, Ton and Reece, Michael (2007) Firing on all cylinders - carbon nanotube-based composites. Materials World, 15 (10). pp. 24-25. ISSN 0967-8638

Iqbal, Sadia Sagar, Inam, Fawad, Bahadar, Ali, Bashir, Arshad, Hassan, Faiza, Khan, Mohammad Bilal, Khan, Zaffar and Jamil, Tahir (2018) Ablation, thermal stability/transport/phase transition study of carbon nanofiber-reinforced elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 131 (3). pp. 2637-2646. ISSN 1588-2926

Iqbal, Sadia Sagar, Inam, Fawad, Iqbal, Nadeem, Jamil, Tahir, Bashir, Arshad and Shahid, Mohammad (2016) Thermogravimetric, differential scanning calorimetric, and experimental thermal transport study of functionalized nanokaolinite-doped elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 125 (2). pp. 871-880. ISSN 1588-2926

Katsamangas, Kostandinos, Bhat, Badekai Ramachandra and Inam, Fawad (2015) Scanning Electronic Microscopy for analysis of the effects of surfactants on de-wrinkling and dispersion of graphene. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 728-732.

Kechi-Okafor, Chimdia, Khan, Farhan R., Al-Naimi, Usama, Béguerie, Victor, Bowen, Libby, Gallidabino, Matteo D., Scott-Harden, Simon and Sheridan, Kelly (2023) Prevalence and characterisation of microfibres along the Kenyan and Tanzanian coast. Frontiers in Ecology and Evolution, 11. p. 1020919. ISSN 2296-701X

Khan, Muhammad Nauman, Jelani, Nadeem, Li, Chunchun and Khaliq, Jibran (2017) Flexible and low cost lead free composites with high dielectric constant. Ceramics International, 43 (4). 3923 - 3926. ISSN 0272-8842

Lee, Mildred, Yeo, Eudora, Blacklock, Matthew, Janardhana, Madabhushi, Feih, Stefanie and Wang, Chun H. (2015) Predicting the strength of adhesively bonded joints of variable thickness using a cohesive element approach. International Journal of Adhesion & Adhesives, 58. pp. 44-52. ISSN 0143-7496

Li, Yifan, Wang, Ding, Richardson, Jack and Xu, Ben (2017) Responsive Hydrogels Based Lens Structure with Configurable Focal Length for Intraocular Lens (IOLs) Application. Macromolecular Symposia, 372 (1). pp. 127-131. ISSN 1022-1360

Liu, Dongjie, Li, Yong, Liu, Fei, Zhou, Wenjing, Sun, Ansu, Liu, Xiaoteng, Chen, Fei, Xu, Bin and Wei, Jinjia (2020) Interfacial Interaction Enhanced Rheological Behavior in PAM/CTAC/Salt Aqueous Solution—A Coarse-Grained Molecular Dynamics Study. Polymers, 12 (2). p. 265. ISSN 2073-4360

Liu, Yingzhi, Lu, Haibao, Xu, Ben, Hui, David and Fu, Yong Qing (2017) Spontaneous biaxial pattern generation and autonomous wetting switching on the surface of gold/shape memory polystyrene bilayer. Composites Part B: Engineering, 122. pp. 9-15. ISSN 1359-8368

Lu, Haibao, Wang, Xiaodong, Yu, Kai, Fu, Yong Qing and Leng, Jinsong (2019) A thermodynamic model for tunable multi-shape memory effect and cooperative relaxation in amorphous polymers. Smart Materials and Structures, 28 (2). 025031. ISSN 0964-1726

Lu, Haibao, Yin, Jinying, Xu, Ben, Gou, Jihua, Hui, David and Fu, Yong Qing (2016) Synergistic effects of carboxylic acid-functionalized carbon nanotube and nafion/silica nanofiber on electrical actuation efficiency of shape memory polymer nanocomposite. Composites Part B: Engineering, 100. pp. 146-151. ISSN 1359-8368

Lu, Haibo, Xin, Wang, Yao, Yongtao, Guo, Jihua, Xu, Ben and Fu, Yong Qing (2015) Synergistic effect of siloxane modified aluminum nanopowders and carbon fiber on electrothermal efficiency of polymeric shape memory nanocomposite. Composites Part B Engineering, 80. pp. 1-6. ISSN 1359-8368

McHale, Glen (2009) All Solids, Including Teflon, Are Hydrophilic (To Some Extent), But Some Have Roughness Induced Hydrophobic Tendencies. Langmuir, 25 (13). pp. 7185-7187. ISSN 0743-7463

McHale, Glen, Newton, Michael and Carroll, Brendan (2001) The Shape and Stability of Small Liquid Drops on Fibers. Oil & Gas Science and Technology - Revue d'IFP Energies nouvelles, 56 (1). pp. 47-54. ISSN 1294-4475

Montgomery, Bruce (2010) Tie the knot. Twist (24). pp. 18-20. ISSN 1759-0418

Montgomery, Bruce (2010) The benefit of textile design research to the textile designer. Duck: Journal for Research in Textiles and Textile Design, 1. ISSN 2024-0854

Morris, Robert, McHale, Glen, Dias, Tilak and Newton, Michael (2013) Embroidered Coils for Magnetic Resonance Sensors. Electronics, 2 (2). pp. 168-177. ISSN 2079-9292

Oliver, Raymond, Tillotson, Jennifer and Toomey, Anne (2009) Bioengineered Textiles and Nonwovens – the convergence of bio-miniaturisation and electroactive conductive polymers for assistive healthcare, portable power and design-led wearable technology. Journal of Fiber Bioengineering and Infomatics, 2 (1). pp. 1-13. ISSN 1940-8676

Pham, Nhan, McHale, Glen, Newton, Michael, Carroll, Brendan and Rowan, S. Michael (2002) Investigation of deposition of monodisperse particles onto fibers. Langmuir, 18 (12). pp. 4979-4983. ISSN 0743-7463

Qureshi, Yumna, Tarfaoui, Mostapha, Lafdi, Khalil K. and Lafdi, Khalid (2019) Real-time strain monitoring performance of flexible Nylon/Ag conductive fiber. Sensors and Actuators A: Physical, 295. pp. 612-622. ISSN 0924-4247

Richardson, Alan (2005) Bond characteristics of structural polypropylene fibres in concrete with regard to post-crack strength and durable design. Structural Survey, 23 (3). pp. 210-230. ISSN 0263-080X

Richardson, Alan (2002) Polypropylene fibres – a 21st century straw? International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan, Coventry, Kathryn and Landless, Sean (2010) Synthetic and steel fibres in concrete with regard to equal toughness. Structural Survey, 28 (5). pp. 355-369. ISSN 0263-080X

Richardson, Alan and Ovington, Rhys (2016) Performance of fibre concrete with regard to temperature. Concrete, 50 (09). pp. 37-39.

Saharudin, Mohd, Atif, Rasheed and Inam, Fawad (2017) Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. Polymers, 9 (1). p. 27. ISSN 2073-4360

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay–polyester nanocomposites exposed to diluted methanol. Journal of Composite Materials, 51 (11). pp. 1653-1664. ISSN 1530-793X

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2015) The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6. pp. 1076-1089. ISSN 2046-2069

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay/polyester. International Journal of Advances in Science Engineering and Technology, 4 (1*). pp. 42-46. ISSN 2321-9009

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Biodegradation of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Short Term Seawater Immersion. Polymers, 9 (8). p. 314. ISSN 2073-4360

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Environmental stress cracking resistance of halloysite nanoclay-polyester nanocomposites. World Journal of Engineering and Technology, 5 (3). pp. 389-403. ISSN 2331-4249

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of Nanomaterials (JNM), 2016. p. 2604631. ISSN 1687-4110

Salokhe, Shivam, Rahmati, Mohammad, Masoodi, Ryan and Entwistle, Jane (2023) The Effect of Fibre Swelling on Fluid Flow in Cotton Fabrics: An Experimental Study. Capillarity. ISSN 2709-2119 (In Press)

Shenashen, Mohamed A., Hassen, Diab, El-Safty, Sherif A., Isago, Hiroaki, Elmarakbi, Ahmed and Yamaguchi, Hitoshi (2017) Axially oriented tubercle vein and X-crossed sheet of N-Co3O4@C hierarchical mesoarchitectures as potential heterogeneous catalysts for methanol oxidation reaction. Chemical Engineering Journal, 313. pp. 83-98. ISSN 1385-8947

Sun, Ansu, Wang, Ding, Zhou, Hongzhao, Li, Yifan, Connor, Chris, Kong, Jie, Sun, Jining and Xu, Bin (2019) Spatially Engraving Morphological Structure on Polymeric Surface by Ion Beam Milling. Polymers, 11 (7). p. 1229. ISSN 2073-4360

Torun, Hamdi, Sarangapani, Krishna K. and Degertekin, F. Levent (2010) Fabrication and Characterization of Micromachined Active Probes With Polymer Membranes for Biomolecular Force Spectroscopy. Journal of Microelectromechanical Systems, 19 (5). pp. 1021-1028. ISSN 1057-7157

Unthank, Matthew, Cameron, Colin, Wright, Anthony C., Hughes, David J., Alam, Ashraf and Probert, Michael (2019) Amino-diol borate complexation for controlling transport phenomena of penetrant molecules into polymeric matrices. Polymer Chemistry, 10 (36). pp. 4920-4929. ISSN 1759-9954

Wan, Chaoying and Chen, Biqiong (2012) Reinforcement of biodegradable poly(butylene succinate) with low loadings of graphene oxide. Journal of Applied Polymer Science, 127 (6). pp. 5094-5099. ISSN 0021-8995

Wang, Ding, Cheewaruangroj, Nontawit, Li, Yifan, McHale, Glen, Jiang, Yingzhu, Wood, David, Biggins, John Simeon and Xu, Ben (2018) Spatially configuring wrinkle pattern and multiscale surface evolution with structural confinement. Advanced Functional Materials, 28 (1). p. 1704228. ISSN 1616-3028

Wang, Xiaodong, Lu, Haibao, Shi, Xiaojuan, Yu, Kai and Fu, Yong Qing (2019) A thermomechanical model of multi-shape memory effect for amorphous polymer with tunable segment compositions. Composites Part B: Engineering, 160. pp. 298-305. ISSN 1359-8368

Wang, Xiaodong, Lu, Haibao, Wu, Nan, Hui, David, Chen, Mingji and Fu, Yong Qing (2019) Cooperative principle in multiple glass transitions and strain relaxations of thermochemically responsive shape memory polymer. Smart Materials and Structures, 28 (8). 085011. ISSN 0964-1726

Wang, Xiaodong, Lu, Haibao, Wu, Nan, Hui, David and Fu, Yong Qing (2019) Unraveling bio-inspired pre-swollen effects of tetra-polyethylene glycol double network hydrogels with ultra-stretchable yielding strain. Smart Materials and Structures, 28 (3). 035005. ISSN 0964-1726

Wang, Xiaodong, Wei, Jian, Lu, Haibao, Lau, Denvid and Fu, Yong Qing (2019) Modeling strategy for enhanced recovery strength and a tailorable shape transition behavior in shape memory copolymers. Macromolecules, 52 (16). pp. 6045-6054. ISSN 0024-9297

Wei, Jiacheng, Atif, Rasheed, Vo, Thuc and Inam, Fawad (2015) Graphene nanoplatelets in epoxy system: dispersion, reaggregation, and mechanical properties of nanocomposites. Journal of Nanomaterials (JNM), 2015. p. 561742. ISSN 1687-4110

Wei, Jiacheng and Inam, Fawad (2017) Processing of epoxy/graphene nanocomposites: effects of surfactants. Journal of Polymer Science & Applications, 1 (1). p. 1000101.

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation. Royal Society Open Science, 4 (170778). ISSN 2054-5703

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2018) Effects of surfactants on the properties of epoxy/graphene nanocomposites. Journal of Reinforced Plastics and Composites. ISSN 0731-6844

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) N,N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers, 9 (6). p. 193. ISSN 2073-4360

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2015) Epoxy/ graphene nanocomposites – processing and properties: a review. RSC Advances, 90 (5). pp. 73510-73524. ISSN 2046-2069

Xu, Ben and Hayward, Ryan (2013) Low-voltage switching of crease patterns on hydrogel surfaces. Advanced Materials, 25 (39). pp. 5555-5559. ISSN 1521-4095

Xu, Ben, Liu, Qihan, Suo, Zhigang and Hayward, Ryan (2016) Reversible Electrochemically Triggered Delamination Blistering of Hydrogel Films on Micropatterned Electrodes. Advanced Functional Materials, 26 (19). pp. 3218-3225. ISSN 1616-301X

Zheng, Wenxiao, Chen, W. G., Zhao, Quanwu, Ren, S. X. and Fu, Yong Qing (2019) Interfacial structures and mechanisms for strengthening and enhanced conductivity of graphene/epoxy nanocomposites. Polymer, 163. pp. 171-177. ISSN 0032-3861

Book Section

Kapsali, Veronika (2012) Biomimetic approaches to the design of smart textiles for protection. In: Smart textiles for protection. Woodhead Publishing Series in Textiles, 133 . Woodhead Publishing Limited, Boca Raton, FL, USA. ISBN 978-0857090560

Kapsali, Veronika (2009) Biomimetics and the design of outdoor clothing. In: Textiles for Cold Weather Protection. Woodhead publishing in textiles, 93 . Woodhead Publishing Limited, Boca Raton, FL, USA, pp. 113-130. ISBN 978-1439801239

Kapsali, Veronika and Dunamore, P. (2008) Biomimetic principles in clothing technology. In: Biologically Inspired Textiles. Woodhead Publishing in Textiles . Woodhead Publishing Limited, Boca Raton, FL, USA, pp. 117-136. ISBN 9781845692476

McHale, Glen, Carroll, Brendan, Pham, Nhan, Newton, Michael and Rowan, S. Michael (2002) Measurement of droplet deposition on fibers. In: Contact angle, wettability and adhesion. Brill, Leiden, pp. 493-506. ISBN 9789067643702

Montgomery, Bruce (2010) ‘In this Digital age are Designers "missing out" on ‘Touch’. In: The Textile Institute Centenary Conference: 3-4 November 2010, Manchester, UK: Textiles: a Global Vision. The Textile Institute, Manchester, UK. ISBN 9781617822704, 9780956641915

Richardson, Alan and Tarbox, Daniel (2013) Strengthening concrete beams using fibre reinforced polymer. In: New developments in structural engineering and construction : Proceedings of the 7th International Structural Engineering and Construction Conference held on 18-23 June 2013 in Honolulu, USA. Research Publishing Services, Singapore. ISBN 9789810753542

Toomey, Anne and Oliver, Raymond (2011) A physical basis for ambient intelligence: the convergence of biology, polymers and electronics enabling new design approaches to assistive living. In: Ambient Media and Systems: Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 2011. Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, 70 (1). Springer, London, pp. 1-11. ISBN 978-3642239014

Conference or Workshop Item

Inam, Fawad (2014) Carbon nanotechnology for future aerospace. In: International Conference on Nanomaterials and Nanotechnology 2014 (ICNN-2014), 7-9 April 2014, Karachi, Pakistan.

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Inam, Fawad (2014) Structural health assessing capabilities in polymeric and ceramic nanocomposites filled with carbon nanofillers. In: International Conference on Structural Nano Composites (NANOSTRUC 2014), 20-21 May, 2014, Madrid, Spain.

Inam, Fawad and Okolo, Chichi (2016) Fullerenes for enhanced performance of novel nano-exploited aircraft materials. In: 14th Eurasia Conference on Chemical Sciences (EuAsC2S), 15th - 18th December 2016, Karachi, Pakistan.

Inam, Fawad, Okolo, Chichi and Vo, Thuc (2016) Damage sensing ability of polymer nanocomposites filled with long, shortened and damaged carbon nanotubes. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Inam, Fawad and Peijs, Ton (2007) Multiscale micro-nanocomposite laminates based on carbon nanotubes and carbon fibres. In: CNT-NET 07, 10-12 September 2007, Trinity College, University of Cambridge.

Inam, Fawad and Peijs, Ton (2007) Re-agglomeration of carbon nanotubes in two-part epoxy system; influence of the concentration. In: 5th International Bhurbhan Conference on Applied Science and Technology (IBCAST 2007), 8-11 January 2007, Islamabad, Pakistan.

Lu, Peng, Cao, Bin, Feng, Qizhi, Yang, Yang, Woo, Wai Lok, Zhao, Jian, Qiu, Xueshi, Gu, Liangyong and Tian, Guiyun (2018) Ensemble Bayesian Tensor Factorization for Debond Thermal NDT. In: 2017 Far East NDT New Technology & Application Forum, 22nd - 24th June 2017, Xi’an, China.

Luhyna, Nataliia, Inam, Fawad and Winnington, Ian (2013) Rapid microwave processing of epoxy nanocomposites using carbon nanotubes. In: Third International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 13-16 May 2013, Wrexham, North Wales.

Okolo, Chichi and Inam, Fawad (2017) Advanced nanocomposite materials for subsea oil & gas production. In: Applied Nanotechnology and Nanoscience International Conference 2017, 18-20 October, 2017, Rome, Italy.

Okolo, Chichi and Inam, Fawad (2017) Fullerene based polymeric nanocomposites for advanced oil/gas subsea applications. In: AMPE 2017 - 2nd International Conference on Advanced Materials and Process Engineering, 12th - 13th December 2017, Karachi, Pakistan.

Okolo, Chichi, Rutherford, Alan, Wood, Chris and Inam, Fawad (2016) Dynamic mechanical analyses for molecular level engineering of advanced subsea polymers. In: 3rd International Conference on Structural Nano Composites (NANOSTRUC 2016), 12-15 September, 2016, Aberdeen, UK.

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In: ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering, 10th - 13th May 2016, Istanbul, Turkey.

Wang, C., Xu, Ben, Terry, Jonathan, Smith, Stewart, Walton, Anthony and Li, Yifan (2017) Test Structures for Stepwise Deformation Sensing on Super-flexible Strain Sensors. In: Microelectronic Test Structures (ICMTS), 2017 IEEE International Conference on, 27-30 March 2017, Grenoble.

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Processing of epoxy/ graphene nanocomposites. In: 6th Chemical Nanoscience Symposium (CNSN-6), 17 March 2016, Newcastle upon Tyne.

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Reinforcement effect of graphene on the mechanical properties of epoxy. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Xu, Ben (2014) 'Instabilities on soft active surface - road to application'. In: 7th International Conference on Technical Advances of Thin Films and Surface Coatings - THINFILMS 2014, 14-18 July 2014, Chongquing China.

Xu, Ben (2014) Instability on the elastic solid, mechanics and engineering. In: COST Joint Training School: Particles at Liquid Interfaces - Fundamentals and Applications, 2-5 April 2014, Bonassola, Italy.

Xu, Ben (2016) Smart materials and technologies for future engineering. In: Newton Researcher Links Workshop on Energy and Environment, July 8-10 2016, Xi'an, China.

Xu, Ben (2015) Soft actuator induced by electro-mechanical instability patterns on polyelectrolyte gel surface. In: Fourth International Conference on Multifunctional, Hybrid and Nanomaterials (Hybrid Materials 2015), 9th - 13th March 2015, Sitges, Spain.

Xu, Ben (2014) Surface instabilities based smart structure/device. In: International Conference on Experimental Mechanics (ICEM 16) 2014, 7-11 July 2014, Cambridge, UK.

Xu, Ben (2016) A new microfluidic switch technique by controllably buckling Stimuli-responsive polyelectrolyte hydrogel thin layer. In: Polymer Networks Group meeting, 19th - 23rd June 2016, Stockholm.

Xu, Ben, Frozanpoor, Iman, Wang, Ding, Wells, Gary, Martin, James, Stuart-Cole, Simone, Wood, David and McHale, Glen (2015) Buckling induced surface morphology transition of drying polymer based droplet. In: The 6th International Workshop on Bubble and Drop Interfaces, 6 - 10 July 2015, Potsdam-Golm.

Xu, Ben and Fu, Yong Qing (2009) Polystyrene based shape memory nanocomposites. In: ICCM-17: 17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

Xu, Ben, Fu, Yong Qing and Huang, Wei Min (2013) Nanomechanics of shape memory polymer nanocomposites with carbon nanofibre and carbon nanotube. In: SMST- 2013: Shape Memory & Superelastic Technologies Conference, 20-24 May 2013, Prague, Czech Republic.

Xu, Ben, Fu, Yong Qing, Kraft, Arno, Reuben, Robert and Huang, Wei Min (2009) Polyurethane/nano-clay shape memory polymer nanocomposites. In: Hybrid Materials 2009: 1st International Conference on Multifunctional, Hybrid and Nanomaterials, 15-19 March 2009, Tours, France.

Xu, Ben and Hayward, Ryan (2012) Electrically activated soft surfaces by a low voltage. In: New.Mech2012: New England Workshop on the Mechanics of Materials and Structures, 3 November 2012, Brown University, Rhode Island, USA.

Xu, Ben and Hayward, Ryan (2013) Low voltage switching of crease patterns on gel surfaces with topographically patterned microelectrodes. In: APS March Meeting 2013, 18-23 March 2013, Baltimore, USA.

Xu, Ben, Wang, Ding, McHale, Glen, Kusumaatmaja, Halim, Wood, David and Cooke, Michael (2015) Mechanically tuning of the shape and controlling the motion of the droplet on a patterned elastic surface. In: Frontiers in Polymer Science Conference (POLY 2015), 20-22 May 2015, Italy.

Thesis

Oppon, Charles (2016) An Investigation into the Characteristics of Polyurethane Foam for Medical Applications Produced Using Additive Manufacturing Technology. Doctoral thesis, Northumbria University.

Tandler, Lynn (2016) The Role of Weaving in Smart Material Systems. Doctoral thesis, Northumbria University.

Patent

Sabic Global Technologies B.V. (2018) Fabrication of piezoelectric composites using high temperature dielectrophoresis technique. WO2018029549A1.

Akzo Nobel Coatings International B.V.; Unthank, Matthew; Jackson, Ian; Thompson, Barry (2018) Process for the manufacture of an epoxy-functional polyester, epoxy-functional polyester obtained by such process and coating composition comprising such epoxy-functional polyester. WO2018011103A1.

This list was generated on Mon Nov 4 18:07:14 2024 UTC.