Coated rotor and slotted pad in a good interactions

Ahmed, I.L.M., Leung, Pak Sing and Datta, Psantu (2002) Coated rotor and slotted pad in a good interactions. In: 20th Annual Brake Colloquium And Exhibition, 6-9 October 2002, Phoenix, AZ.

Full text not available from this repository. (Request a copy)
Official URL: http://dx.doi.org/10.4271/2002-01-2599

Abstract

Coating is very important in some applications particularly disc brakes that are most commonly used in the passenger cars. Slotted friction material also has a great effect on the behaviour of the disc brake friction. Mixing between the coated rotor and the slotted material is of importance to improve the frictional behaviour of the disc brake. Slotted material used in this work is divided into two parts; each part has leading and trailing edge to give the advantages of using two pads in a single braking action. Simulating the kinetic energy of a passenger car to measure the friction force between the disc and pad at different operating conditions have been designed in a test rig. The effect of thermal loading at the sliding interface between the different friction material and the rotor of Floating Calliper Disc Brake (FCDB) has been studied in this work. Initial disc surface temperature was measured and controlled through a high quality technique by using a thermal camera that was fixed at suitable place close to the rotor. The signal from the transducer was amplified and displayed on a digital storage oscilloscope and then fed to a computer for the final analysis. The results showed the different values of coefficient of friction depending on the different operating conditions. The maximum coefficient of friction was 0.58 that was recorded at initial disc surface temperature of 150°C while the braking pressure was 20 bar. The minimum value for the friction coefficient 0.30 was also recorded at initial disc surface temperature of 50°C at rotating speed 500 rpm while the braking pressure was 25 bar.

Item Type: Conference or Workshop Item (Paper)
Uncontrolled Keywords: coated disc, coating, friction and coefficient of friction, disc brake
Subjects: H300 Mechanical Engineering
Department: Faculties > Engineering and Environment > Architecture and Built Environment
Depositing User: Becky Skoyles
Date Deposited: 20 Jan 2015 14:50
Last Modified: 10 Aug 2015 11:30
URI: http://nrl.northumbria.ac.uk/id/eprint/20772

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence