 | Up a level |
Airoldi, G., Bumby, J. R., Dominy, R. G., Ingram, G. I., Lim, C. H., Mahkamov, Khamid, Brown, N. L., Mebarki, A. and Shanel, M. (2009) Air flow and heat transfer modeling of an Axial Flux Permanent Magnet Generator. In: International Conference on Computer, Electrical and Systems Science Engineering, WASET, 4-6 February 2009, Dubai, UAE.
Alexakis, Athanasios, Gkounis, George, Mahkamov, Khamid and Davis, J. (2011) Experimental and theoretical evaluation of the performance of a Whispergen MkVb micro CHP unit in typical UK house conditions. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (3). pp. 810-817. ISSN 1650-3686
Aneke, Mathew, Agnew, Brian and Underwood, Chris (2011) Approximate analysis of the economic advantage of a dual source ORC system over two single ORC systems in the conversion of dual low and mid grade heat energy to electricity. Journal of EUEC, 5. pp. 2-17. ISSN 1941-9848
Aneke, Mathew, Agnew, Brian and Underwood, Chris (2011) Performance analysis of the Chena binary geothermal power plant. Applied Thermal Engineering, 31 (10). pp. 1825-1832. ISSN 1873-5606
Aneke, Mathew, Agnew, Brian, Underwood, Chris and Masheiti, Salah (2012) Power generation from waste heat in a food processing application. Applied Thermal Engineering, 36. pp. 171-180. ISSN 1359-4311
Beaverstock, Christopher, Richardson, Thomas, Isikveren, Askin and Maheri, Alireza (2010) Complete flight control system integration and optimisation from a conceptual design phase. In: 27th Congress of the International Council of the Aeronautical Sciences, 19-24 September 2010, Nice, France .
Beaverstock, Christopher, Richardson, Thomas, Maheri, Alireza and Isikveren, Askin (2012) Integrated flight control system development using CEASIOM. Canadian Aeronautics and Space Journal, 58 (1). pp. 29-46. ISSN 1712-7998
Belgasim, Basim and Mahkamov, Khamid (2011) Theoretical modelling of a dynamic solar thermal desalination unit with a fluid piston engine. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (14). pp. 3867-3872. ISSN 1650-3686
Berry, Andrew J., Howitt, Jeremy, Gu, Da-Wei and Postlethwaite, Ian (2012) A continuous local motion planning framework for unmanned vehicles in complex environments. Journal of Intelligent & Robotic Systems, 66 (4). pp. 477-494. ISSN 0921-0296
Birkett, Martin (2012) Optimization of the deposition and annealing of CuAIMo thin film resistors. In: ICMR 2012: International Conference on Manufacturing Research 2012, 11-13 September 2012, Aston University, Birmingham, UK.
Birkett, Martin (2012) Using CES EduPak to select alternative materials for the Greenpower electric car. In: 4th International Materials Education Symposium, 12-13 April 2012, Cambridge University, UK. (Unpublished)
Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2006) Effects of annealing on the electrical properties of NiCr vs AlCu thin film resistors prepared by DC magnetron sputtering. In: CARTS Europe 2006: 20th Annual Capacitor and Resistor Technology Symposium, 25-28 September 2006, Bad Homburg, Germany.
Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2007) Electrical characterisation of AlCuMo thin films prepared by DC magnetron sputtering. In: ICMCTF 2007: 34th International Conference on Metallurgical Coatings and Thin Films, 23-27 April, 2007, San Diego, USA.
Birkett, Martin, Oxley, Stephen and Peters, Barry (2008) Discrete resistor technologies and potential future advancements. In: CARTS Europe 2008: 22nd Annual Capacitor and Resistor Technology Symposium, 20-23 October 2008, Helsinki, Finland.
Birkett, Martin and Penlington, Roger (2013) Laser trim pattern modelling and optimisation for CuAlMo thin film resistors. IEEE Transactions on Components, Packaging and Manufacturing Technology, 3 (3). pp. 523-529.
Birkett, Martin and Penlington, Roger (2012) Laser trimming of CuAlMo thin-film resistors: effect of laser processing parameters. Journal of Electronic Materials, 41 (8). pp. 2169-2177. ISSN 0361-5235
Boutat, Driss and Busawon, Krishna (2011) On the transformation of nonlinear dynamical systems into the extended nonlinear observable canonical form. International Journal of Control, 84 (1). pp. 94-106. ISSN 0020-7179
Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Assessment of professional competencies and mobility of engineers in Europe. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 9781907632167
Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Engineering continuing professional development and mobility in the European green job market. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 224-229. ISBN 9781467329095
Centeno, Felipe, Mahkamov, Khamid, Silva Lora, Electo and Andrade, Rubenildo (2012) Theoretical and experimental investigations of a downdraft biomass gasifier-spark ignition engine power system. Renewable Energy, 37 (1). pp. 97-108. ISSN 0960-1481
Chaal, Hamza and Jovanovic, Milutin (2009) Improved direct torque control using Kalman filter: application to a doubly-fed machine. In: 11th IASTED International Conference on Control and Applications (CA 2009), 13-15 July 2009, Cambridge, UK.
Chawdhury, M. A. and Mahkamov, Khamid (2011) Development of a small downdraft biomass gasifier for developing countries. Journal of Scientific Research, 3 (1). pp. 51-64. ISSN 2070-0237
Cheung, Wai Ming, Dai, Wei, Maropoulos, Paul G. and Tang, Xiaoqing (2011) Failure Knowledge based Decision-Making in Product Quality. International Journal of Product Lifecycle Management (IJPLM), 5 (2/3/4). pp. 143-163. ISSN 1743-5110
Cheung, Wai Ming, Griffin, P. W., Newnes, L. B., Mileham, A. R., Marsh, R. and Lanham, J. D. (2010) Predicting the end of life of defence electronic systems from the conceptual design stage. In: Proceedings of the 36th International MATADOR Conference. Springer , New York, USA, pp. 149-152. ISBN 9781849964326
Cheung, Wai Ming and Maropoulos, Paul G. (2007) A novel knowledge management methodology to support collaborative product development. In: Digital Enterprise Technology: Perspectives and Future Challenges. Springer, New York, USA, pp. 201-208. ISBN 9780387498638
Cheung, Wai Ming, Marsh, R., Newnes, L. B., Mileham, A. R. and Lanham, J. D. (2009) Standards and inference of design information in through life costing of defence electronic products. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 223 (2). pp. 169-181. ISSN 0954-4054
Cheung, Wai Ming, Matthews, Paul C., Gao, J. X. and Maropoulos, Paul G. (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543
Cheung, Wai Ming, Mileham, A. R., Newnes, L. B., Marsh, R. and Lanham, J. D. (2011) Data-driven through-life costing to support product lifecycle management solutions in innovative product development. International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 122-142. ISSN 1743-5110
Cheung, Wai Ming, Newnes, L. B., Mileham, A. R. and Goh, Mey Y. (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer , New York, pp. 135-151. ISBN 9781441983213
Cheung, Wai Ming, Newnes, L. B., Mileham, A. R., Marsh, R. and Lanham, J. D. (2007) Cost estimation in product development: academic research and commercial systems evaluation. In: DET 2007: 4th International Conference in Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK.
Cheung, Wai Ming, Newnes, L. B., Mileham, A. R., Marsh, R. and Lanham, J. D. (2007) A study of life cycle costing in the perspectives of research and commercial applications in the 21st century. In: Volume 4: ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications and the 19th Reliability, Stress Analysis, and Failure Prevention Conference. American Society of Mechanical Engineers, New York, USA, pp. 721-730. ISBN 0791848051
Cheung, Wai Ming and Xu, Y. (2012) Cost engineering for manufacturing: current and future research. International Journal of Computer Integrated Manufacturing, 25 (4/5). pp. 300-314. ISSN 0951-192X
Connor, Chris, Hodgson, Steve and Nabhani, Farhad (2009) Contact area, pressure distribution and mechanical stability in external arthrodesis of the ankle joint. In: Proceedings of the 19th International Conference on Flexible Automation and Intelligent Manufacturing. Flexible Automation and Intelligent Manufacturing Proceedings . Gemini International Limited, Tesside University, pp. 23-28. ISBN 978-09562303-2-4
Daadbin, Ali and Rosinski, Jarek (2011) Continuous monitoring of essential components as a measure to increase the safety of Rail Transport. International Journal of Safety and Security in Transport, 2011, 3 (1). pp. 283-297. ISSN 2041-9031
Daadbin, Ali and Rosinski, Jarek (2010) Development, testing and implementation of Pantograph Damage Monitoring System (PDMS). In: Computers in railways XII : computer system design and operation in railways and other transit systems. WIT transactions on the built environment , 114 . WIT Press, Southampton. ISBN 9781845644680
Dai, Xuewu, Gao, Zhiwei, Breikin, Tim and Wang, Hong (2009) Disturbance Attenuation in Fault Detection of Gas Turbine Engines: A Discrete Robust Observer Design. IEEE Transactions on Systems, Man, and Cybernetics, Part C (Applications and Reviews), 39 (2). pp. 234-239. ISSN 1094-6977
Dale, Phillip J., Samantilleke, A. P., Zoppi, Guillaume, Forbes, Ian, Roncallo, Scilla and Peter, L. M. (2007) Deposition and characterization of copper chalcopyrite based solar cells using electrochemical techniques. ECS Transactions, 6 (2). pp. 535-546. ISSN 1938-6737
Davies, Gareth F., Eames, Ian W., Bailey, Paul B., Dadd, Michael W., Janiszewski, Adam, Stone, C. Richard, Maidment, Graeme G. and Agnew, Brian (2010) Development of miniature vapour compression refrigeration systems from electronic cooling. In: Proceedings of the ASME interpack conference 2009. ASME, New York , pp. 399-408. ISBN 9780791843604
Dizqah, Arash M., Maheri, Alireza and Busawon, Krishna (2012) An assessment of solar irradiance stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 670-675. ISBN 9781467329095
Dizqah, Arash M., Maheri, Alireza and Busawon, Krishna (2012) An assessment of wind speed stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 623-627. ISBN 9781467329095
Edge, Jeremy Simon and Underwood, Chris (2002) Heating System Water Flow Rate Prediction Using Three Port Control Valves. In: CIBSE National Technical Conference, 24 October 2002, Royal College of Physicians, London, United Kingdom.
Fleming, William (2006) Prediction of the fatigue of metal matrix composites using theory of cells. Doctoral thesis, Northumbria University.
Gao, Zhiwei, Breikin, Tim and Wang, Hong (2008) Discrete-time proportional and integral observer and observer-based controller for systems with both unknown input and output disturbances. Optimal Control Applications and Methods, 29 (3). pp. 171-189. ISSN 0143-2087
Gu, Da-Wei, Natesan, Kannan and Postlethwaite, Ian (2008) Modelling and robust control of fluidic thrust vectoring and circulation control for unmanned air vehicles. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 222 (5). pp. 333-345. ISSN 0959-6518
Hackney, Philip and Ainsley, Christopher (2011) Rapid manufacturing- state of the art, analysis and future perspectives. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011 , 23-24 May 2011, Terrenganu, Malaysia.
Hackney, Philip and Curry, Paul (2011) A case study of the benefits and conflicts of knowledge between industry, academia and government. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011 , 23-24 May 2011, Terrenganu, Malaysia.
Haider, Julfikar, Hashmi, M. S. J., Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) New generation of MoSx based solid lubricant coatings: recent developments and applications. AIP conference proceedings , 1315. pp. 1365-1370. ISSN 0094-243X
Haider, Julfikar and Sarwar, Mohammed (2012) Selection of advanced coating on a milling cutter used for manufacturing saw teeth. International Journal of Surface Science and Engineering, 6 (1/2). pp. 45-58. ISSN 1749-785X
Fendor Limited, Hall Nichola, Smith Martin, Duffy Chris, Lievesley Matthew, Redhead, Paul, Smith, Neil (2011) A Motorized Drive Mechanism. WO 2011/030141 A1.
Hanish, Giuma Ramadan (2005) Investigation of the influence coefficient method for balancing of flexible rotors systems. Doctoral thesis, Northumbria University.
Hasan, Reaz (2012) Identification of generic errors for effective formative feedback in energy studies thematic area of mechanical engineering. In: Innovation, Practice and Research in Engineering Education (EE2012), 18-20 September 2012, Coventry University.
Hasan, Reaz (2012) Teaching ethics to engineering undergraduates - lessons learned and a guide for lecturers: perspective from an English University. In: Innovation, Practice and Research in Engineering (EE2012), 18-20 September 2012, Coventry, UK.
Hasan, Reaz, Perera, Noel, Baddage, S. and Persson, Martin (2012) Numerical modelling of heat transfer in a tube furnace for steel wire annealing. In: 29th International Manufacturing Conference (IMC29), 29-30 August 2012, University of Ulster, Northern Ireland.
Herrmann, Guido, Menon, P. P., Turner, Matthew, Bates, Declan and Postlethwaite, Ian (2010) Anti-windup synthesis for nonlinear dynamic inversion control schemes. International Journal of Robust and Nonlinear Control, 20 (13). pp. 1465-1482. ISSN 1049-8923
Iyi, Draco, Hasan, Reaz and Penlington, Roger (2012) Interaction effects between surface radiation and double-diffusive turbulent natural convection in an enclosed cavity filled with solid obstacles. In: International Symposium on Advances in Computational Heat Transfer ICHMT, 1-6 July 2012, Bath, England.
Iyi, Draco, Hasan, Reaz and Penlington, Roger (2013) Numerical simulation of 2D turbulent natural convection of humid air in a cavity filled with solid objects. Procedia Engineering, 56. pp. 538-543. ISSN 1877-7058
Johnson, Patrick (2008) Analysis of 2nd order differential equations : applications to chaos synchronisation and control. Doctoral thesis, Northumbria University.
Jovanovic, Milutin, Betz, Robert E. and Yu, James (2002) The use of doubly fed reluctance machines for large pumps and wind turbines. IEEE Transactions on Industry Applications, 38 (6). pp. 1508-1516. ISSN 0093-9994
Jovanovic, Milutin, Levi, Emil and Yu, James (2006) Encoderless direct torque controller for limited speed range applications of brushless doubly-fed reluctance motors. IEEE Transactions on Industry Applications, 42 (3). pp. 712-722. ISSN 0093-9994
Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2012) Reliability criteria in optimal sizing of stand-alone hybrid wind-PV-battery bank system. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 184-189. ISBN 9781467329095
Kamjoo, Azadeh, Maheri, Alireza, Putrus, Ghanim and Dizqah, Arash M. (2012) Multi-Objective Optimisation of Hybrid Wind Turbine - PV Systems. In: WERF 2012: World Renewable Energy Forum , 13-17 May 2012, Denver, Colorado, USA.
Khan, Fahd N., Daadbin, Ali, Persson, Martin, Haider, Julfikar and Hellbergh, Hakan (2012) Assessing the performance of TiAlSiN coating on bandsaw tooth when cutting Ti-17 alloy. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (5). pp. 870-877. ISSN 0954-4054
Kim, Yoonsoo, Gu, Da-Wei and Postlethwaite, Ian (2009) Spectral radius minimization for optimal average consensus and output feedback stabilization. Automatica, 45 (6). pp. 1379-1386. ISSN 0005-1098
WWB Services Ltd (2008) International Patent describing a novel Wheelchair Storage System for public environments. WO 2008/040948 A1.
Kothari, Mangal, Gu, Da-Wei and Postlethwaite, Ian (2009) An intelligent suboptimal path planning algorithm using rapidly-exploring random trees. In: ECC’09: European Control Conference 2009, 23-26 August 2009, Budapest, Hungary.
Kothari, Mangal, Pinto, José, Prabhu, Vinayak, Calado, Pedro, Borges de Sousa, João and Baliyarasimhuni, Sujit (2012) Robust mission planning for underwater applications: Issues and challenges. In: IFAC Workshop on Navigation, Guidance and Control of Underwater Vehicles, 10-12 April 2012, Porto, Portugal.
Kothari, Mangal, Postlethwaite, Ian and Gu, Da-Wei (2010) A suboptimal path planning algorithm using rapidly exploring random trees. International Journal of Aerospace Innovations, 2 (1&2). pp. 93-104. ISSN 1757-2258
Kothari, Mangal, Postlethwaite, Ian and Gu, Da-Wei (2009) A suboptimal path planning algorithm using rapidly-exploring random trees. In: IISc Centenary Conference, 13-16 December 2008, Bangalore, India.
Kraitong, Kwanchai (2012) Numerical Modelling and Design Optimisation of Stirling Engines for Power Production. Doctoral thesis, Northumbria University.
Kraitong, Kwanchai and Mahkamov, Khamid (2011) Optimisation of low temperature difference Solar Stirling Engines using genetic altorithm. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (14). pp. 3946-3952. ISSN 1650-3686
Kuleshov, A., Kozlov, A. and Mahkamov, Khamid (2010) Self-Ignition delay prediction in PCCI direct injection diesel engines using multi-zone spray combustion model and detailed chemistry. In: SAE 2010 Commercial Vehicle Engineering Congress, 5 Otober 2010, Chicago, Illinois, USA.
Li, Bo, Wan, Chaoying, Zhang, Yong and Ji, Jiliang (2010) Blends of poly (2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 toughened by maleated polystyrene-based copolymers: Mechanical properties, morphology, and rheology. Journal of Applied Polymer Science, 115 (6). pp. 3385-3392. ISSN 0021-8995
Lim, C. H., Airoldi, G., Bumby, J. R., Dominy, R. G., Ingram, G. I., Mahkamov, Khamid, Brown, N. L., Mebarki, A. and Shanel, M. (2010) Experimental and CFD investigation of a lumped parameter thermal model of a single-sided, slotted axial flux generator. International Journal of Thermal Sciences, 49 (9). pp. 1732-1741. ISSN 1290-0729
Lim, C. H., Bumby, J. R., Dominy, R. G., Ingram, G. I., Mahkamov, Khamid, Brown, N. L., Mebarki, A. and Shanel, M. (2008) 2-D lumped-parameter thermal modelling of axial flux permanent magnet generators. In: Proceedings of ICEM 2008, 18th International Conference on Electrical Machines, 2008. IEEE, Piscataway, pp. 1-6. ISBN 9781424417353
Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2012) Improvement of the accuracy of the blade element momentum theory method in wind turbine aerodynamics analysis. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 402-405. ISBN 9781467329095
Maheri, Alireza (2012) A finite element suite for deformation analysis of composite aeroelastic structures subjected to operational aerodynamic loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (8). pp. 2062-2076. ISSN 0954-4062
Maheri, Alireza, Bagali, R., Chilak, C., Scheller, F. and Mustafa, A. I. (2012) Deterministic versus nondeterministic design of hybrid renewable energy systems. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 212-217. ISBN 9781467329095
Maheri, Alireza and Isikveren, Askin (2011) Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1633-1643. ISSN 0954-4062
Maheri, Alireza and Isikveren, Askin (2010) Performance prediction of wind turbines utilizing passive smart blades: approaches and evaluation. Wind Energy, 12 (2/3). pp. 255-265. ISSN 1095-4244
Maheri, Alireza, Macquart, Terence, Safari, D. and Maheri, Mahmoud R. (2012) Phenotype building blocks and geometric crossover in structural optimisation. Civil-Comp Proceedings, 51. ISSN 1759-3433
Maheri, Alireza and Maheri, Mahmoud R. (2007) Optimum geometry design of plane trusses supporting distributed loads using genetic algorithms. Civil-comp Proceedings: Proceedings of the Ninth International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, 87 (10). ISSN 1759-3433
Maheri, Alireza and Maheri, Mahmoud R. (2012) A robust method for integrated design of trusses supporting distributed loads. Engineering Structures, 40. pp. 339-349. ISSN 0141-0296
Maheri, Alireza, Noroozi, Siamak, Toomer, Chris A. and Vinney, John (2007) Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32 (1). pp. 95-104. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak, Toomer, Chris A. and Vinney, John (2006) WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31 (11). pp. 1673-1685. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Combined analytical/FEA-based coupled aero structure simulation of a wind turbine with bend–twist adaptive blades. Renewable Energy, 32 (6). pp. 916-930. ISSN 0960-1481
Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Decoupled aerodynamic and structural design of wind turbine adaptive blades. Renewable Energy, 32 (10). pp. 1753-1767. ISSN 0960-1481
Mahkamov, Khamid (2011) Thermal engine based small and micro CHP systems for domestic application and modelling system deployment. In: Small and micro-combined heat and power (CHP) systems: advanced design, performance, materials and applications. Woodhead publishing series in energy , 18 . Woodhead Publishing, Oxford, UK. ISBN 9781845697952
Mahkamov, Khamid and Akhatov, J. S. (2008) Experimental study of the performance of multieffect solar thermal water desalination system. Applied Solar Energy, 44 (1). pp. 31-34. ISSN 0003-701X
Mahkamov, Khamid and Eid, Eldesouki (2009) Technical feasibility study of a concept of a medium temperature Stirling engine solar power unit. In: Proceedings of the 14th International Stirling Engine Conference. Stirling International, Italy. ISBN 9788883260223
Makhkamova, Irina, Taylor, P. C., Bumby, J. R. and Mahkamov, Khamid (2008) CFD analysis of the thermal state of an overhead line conductor. In: Proceedings of the 2008 43rd International Universities Power Engineering Conference. IEEE, Piscataway, pp. 1-4. ISBN 9781424432943
Marsh, R., Jonik, M., Lanham, J. D., Cheung, Wai Ming, Newnes, L. B. and Mileham, A. R. (2010) Modelling an assembly process using a close coupled generative cost model and a discrete event simulation. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 257-269. ISSN 0951-192X
Martínez, Juan Daniel, Mahkamov, Khamid, Andrade, Rubenildo and Silva Lora, Electo (2012) Syngas production in downdraft biomass gasifiers and its application using internal combustion engines. Renewable Energy, 38 (1). pp. 1-9. ISSN 0960-1481
Ming, L., Wan, Chaoying and Zhang, Yong (2009) Preparation of functional water-dispersible Carbon Nanotubes. Chinese Polymer Bulletin, 10. pp. 1-8. ISSN 1003-3726
Naylor, Andrew, Hackney, Philip and Clahr, Emil (2011) Machining of wood using a Rip Tooth: effects of work-piece variations on cutting mechanics. In: 20th International Wood Machining seminar, 7-10 June 2011, Skellefteå , Sweden.
Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Determination of wood strength properties through standard test procedures. In: ICMR 2012: 10th International Conference on Manufacturing Research, 11-13 September 2012 , Aston University, Birmingham, UK.
Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Evaluation of handsaw tooth performance through the development of a controlled cutting test rig. In: ICMR 2012: International Conference on Manufacturing Research 2012, 11-13 September 2012, Aston University, Birmingham, UK.
Naylor, Andrew, Hackney, Philip, Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machnining developed using mechanical properties. Bioresources.com, 7 (3). pp. 2883-2894. ISSN 1930-2126
Newnes, L. B., Mileham, A. R., Cheung, Wai Ming, Marsh, R., Lanham, J. D., Saravi, M. E. and Bradbery, R. W. (2008) Predicting the whole-life cost of a product at the conceptual design stage. Journal of Engineering Design, 19 (2). pp. 99-112. ISSN 0954-4828
Nezami, Mehran, Cheung, Wai Ming and Mansi, Safwat (2012) Adoption of Open Source and conventional ERP solutions for small and medium enterprises in manufacturing. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research , 11-13 September 2012, Aston University, Birmingham, UK.
Perera, Noel and Penlington, Roger (2012) Supporting the attainment of professional attributes in a work based learning programme. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 9781907632167
Ratnoo, Ashwini, Sujit, P. B. and Kothari, Mangal (2011) Optimal path following for high wind flights. In: 18th World Congress of the International Federation of Automatic Control (IFAC) , 28 August - 2 September 2011, Milan, Italy.
Ren, Qiang, Wan, Chaoying, Zhang, Yong and Li, Jian (2011) An investigation into synergistic effects of rare earth oxides on intumescent flame retardancy of polypropylene/poly (octylene-co-ethylene) blends. Polymers for Advanced Technologies, 22 (10). pp. 1414-1421. ISSN 1042-7147
Rosamond, E. L. and Cheung, Wai Ming (2013) A proposed method for Design for Eco-Finance. In: Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment. Springer, London, pp. 463-474. ISBN 9781447144250
Salem, Ghozzia and Mahkamov, Khamid (2011) Case study: Modelling and sizing stand-alone PV systems for powering mobile phone stations in Libya. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (11). pp. 2891-2898. ISSN 1650-3686
Saravi, M. E., Newnes, L. B., Mileham, A. R. and Cheung, Wai Ming (2007) Improved cost estimation accuracy through quality improvement techniques. In: Proceedings of the 5th International Conference on Manufacturing Research. De Montfort University, Leicester, UK, pp. 65-69. ISBN 9780955671401
Sarwar, Mohammed, Dinsdale, Mike and Haider, Julfikar (2012) Development of advanced broaching tool for machining titanium alloy. Advanced Materials Research, 445. pp. 161-166. ISSN 1662-8985
Sarwar, Mohammed and Haider, Julfikar (2010) Aspects of burr formation in bandsaw teeth manufactured by milling operation. Robotics and Computer-Integrated Manufacturing, 26 (6). pp. 596-601. ISSN 0736-5845
Sarwar, Mohammed and Haider, Julfikar (2011) Characteristics and Machining Performance of TiN and TiAlN Coatings on a Milling Cutter. AIP conference proceedings , 1315. pp. 1005-1010. ISSN 0094-243X
Sarwar, Mohammed, Haider, Julfikar, Persson, Martin, Hellbergh, Hakan, Chinesta, Francisco, Chastel, Yvan and El Mansori, Mohamed (2011) Material behavior at the extreme cutting edge in bandsawing. In: AMPT 2010 International conference on advances in materials and processing technologies, 24-27 October 2010, Paris, France.
Sarwar, Mohammed, Persson, Martin and Hellbergh, Hakan (2007) Wear of the cutting edge in the bandsawing operation when cutting austentic 17-7 stainless steel. Wear, 263 (7-12). pp. 1438-1441. ISSN 0043-1648
Sedef, Kanber, Maheri, Alireza, Daadbin, Ali and Yilmaz, Mustafa (2012) A comparative study of the performance of DC permanent magnet and AC induction motors in urban electric cars. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 100-105. ISBN 9781467329095
Sedef, Kanber, Meheri, Alireza, Daadbin, Ali and Yilmaz, Mustafa (2012) A comparative study of the performance of DC permanent magnet and AC induction motors in urban electric cars. In: EFEA 2012: 2nd International Symposium on Environment Friendly Energies and Applications, 25-27 July 2012, Northumbria University, Newcastle upon Tyne, UK.
Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. In: 5th Manufacturing Engineering Society International Conference, 26-28 June 2013, Zaragoza, Spain. (In Press)
Smith, Benjamin A. and Maheri, Alireza (2012) Optimisation of the efficiency of carbon fibre heating elements implanted in wind turbine blades. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 410-414. ISBN 9781467329095
Tan, Kian, Connor, Chris and Fleming, Bill (2007) Translating ideas into marketable products: Educating and shaping the future product designers. In: EPDE07: International Conference on Engineering and Product Design Education , 13-14 September 2007, Newcastle upon Tyne, UK.
Turner, Matthew, Herrmann, Guido and Postlethwaite, Ian (2009) Improving sector-based results for systems with dead-zone nonlinearities and constrained control applications. Automatica, 45 (1). pp. 155-160. ISSN 0005-1098
Vickers, Paul (2011) Sonification Design and Aesthetics. In: Northumbria Research Conference, 5 May - 6 May 2011, Northumbria University, Newcastle-upon-Tyne.
Wallace, Kieran and Cheung, Wai Ming (2012) Design and development of an excavator mounted dust suppression system. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research , 11-13 September 2012, Aston University, Birmingham, UK.
Zhang, Hui, Daadbin, Ali, Meheri, Alireza and Hackney, Philip (2012) An analytical model for frequency analysis of composite wind turbine adaptive blades. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, pp. 406-411. ISBN 9781467329095
Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for deformation analysis of wind turbine adaptive blades. In: High Performance Structure and Materials VI. WIT transactions on the built environment, 124 . WIT Press, Southampton, UK, pp. 13-25. ISBN 9781845645960