Graphene reinforced alumina nano-composites

Porwal, Harshit, Tatarko, Peter, Grasso, Salvatore, Khaliq, Jibran, Dlouh, Ivo and Reece, Mike (2013) Graphene reinforced alumina nano-composites. Carbon, 64. 359 - 369. ISSN 0008-6223

Full text not available from this repository. (Request a copy)
Official URL: https://doi.org/10.1016/j.carbon.2013.07.086

Abstract

Graphene was prepared using liquid phase exfoliation and dispersed in an alumina matrix using an ultrasonication and powder processing route. Al2O3–graphene composites with up to 5 vol% content were densified (>99%) using SPS. The fracture toughness of the material increased by 40% with the addition of only 0.8 vol% graphene. However for higher graphene contents the improvement in fracture toughness was limited. Graphene changed the mechanism of crack propagation for the alumina matrix from inter-granular to trans-granular. The formation of an inter-connecting graphene network promoted easy fracture for concentration ⩾2 vol%. Elastic modulus remained nearly constant for up to 2 vol% and decreased significantly for 5 vol% due to the formation of the inter-connecting graphene network. Fracture toughness measured with the indentation and chevron notch methods were consistent up to 2 vol% and at 5 vol% the percolating network of graphene resulted in easy crack propagation with significant discrepancy between the results for the two methods.

Item Type: Article
Subjects: F100 Chemistry
F200 Materials Science
F300 Physics
H300 Mechanical Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Jibran Khaliq
Date Deposited: 25 Sep 2017 10:22
Last Modified: 25 Sep 2017 10:24
URI: http://nrl.northumbria.ac.uk/id/eprint/31948

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence