Modelling of a Turbulent Jet in a Gas Crossflow

Moffat, Dominic and Burluka, Alexey (2013) Modelling of a Turbulent Jet in a Gas Crossflow. In: Volume 1A: Combustion, Fuels and Emissions. ASME, V01AT04A017. ISBN 978-0-7918-5510-2

Full text not available from this repository.
Official URL: http://dx.doi.org/10.1115/GT2013-94309

Abstract

The first part of this work presents a comparison of predictions obtained with several two-equation type RANS turbulence models commonly used in industry against experimental data obtained by Whitelaw et al [1]. All examined models yield a relatively poor match in the flow region very close to the wall; agreement with the measurements improves significantly when moving further away from the wall. This concerns both the internal normal stress profiles and the average velocity profiles, the latter show improved prediction of the recirculation zone area when moving further into the main stream. Downstream behaviour for both models shows an excellent match more than 6 diameters away from the jet inlet, defined as the region after which the flow essentially resumes its normal duct behaviour[1].

Expanding upon these RANS results, another series of simulations using LES modelling with the standard Smagorinsky SGS model was conducted using the same grid and compared to the RANS-based results. Although performance in the most complex flow areas was slightly improved over RANS, this was at the cost of an increase of computation time by almost a factor of 6.

The next stage involved developing a code based on the model for two-phase flow described in [2] to predict the atomisation pattern for a non-vaporising (or “cold”) flow based on the parameters of the previous simulations. This model implements transport equations for the liquid mass fraction and the average surface area per unit mass along with an equation for average density; resulting in an entirely Eulerian model which can be used to predict atomisation from first principles. Current work consists in development of additional source terms describing vaporisation in a strongly turbulent environment and further coupling with a combustion model applicable to the combustion chamber of an industrial gas turbine.

Item Type: Book Section
Subjects: H300 Mechanical Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Becky Skoyles
Date Deposited: 27 Jul 2018 14:49
Last Modified: 27 Jul 2018 14:49
URI: http://nrl.northumbria.ac.uk/id/eprint/35158

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence