Temperature related pull-out performance of chemical anchor bolts in fibre concrete

Richardson, Alan, Dawson, Susan, Campbell, Laura, Moore, George and McKenzie, Craig (2019) Temperature related pull-out performance of chemical anchor bolts in fibre concrete. Construction and Building Materials, 196. pp. 478-484. ISSN 0950-0618

[img] Text
Anchor bolt pull out Final.pdf - Accepted Version
Restricted to Repository staff only until 23 November 2019.
Available under License Creative Commons Attribution Non-commercial No Derivatives 4.0.

Download (556kB)
Official URL: http://dx.doi.org/10.1016/j.conbuildmat.2018.11.14...

Abstract

Anchor bolts are often fixed into a concrete soffit of structures and they are used in ambient and cold store locations. The chemical anchor bolt relies purely on the tensile strength of the concrete to carry the imposed load, assuming the bond strength of the resin is greater than the tensile strength of the concrete.

The properties of concrete are changed by the addition of both steel and polypropylene fibres. This paper investigates the relative performance of each fibre type with regard to initial and final post crack failure. Anchor bolt pull-out testing was used to determine the maximum load a fixing can hold as well as the residual post crack toughness of a bolt embedded in a concrete block. The concrete used was a C40 design mix and resin anchor bolts were selected for this test for their stress-free conditions prior to loading.

The results showed that the addition of both types of fibres when used in concrete improved the maximum load and toughness of the samples, compared to plain concrete. There was not a significant difference between the results obtained for steel and polypropylene fibres. The effects of a reduction in core temperature of the samples was examined. The results show that the strength of concrete is significantly improved when tested at −20 °C, compared to ambient temperature.

Item Type: Article
Uncontrolled Keywords: Resin anchor bolt, Pull out, Fibre concrete, Temperature −20 °C, Toughness
Subjects: H200 Civil Engineering
Department: Faculties > Engineering and Environment > Architecture and Built Environment
Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Becky Skoyles
Date Deposited: 28 Nov 2018 12:34
Last Modified: 11 Dec 2018 08:46
URI: http://nrl.northumbria.ac.uk/id/eprint/36949

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year

View more statistics


Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence