Browse by Northumbria Author

Siddique, Shohel, Novak, Adam, Guliyev, Emin, Yates, Kyari, Leung, Ken and Njuguna, James (2022) Oil-Based Mud Waste as a Filler Material in LDPE Composites: Evaluation of Mechanical Properties. Polymers, 14 (7). p. 1455. ISSN 2073-4360

Siddique, Shohel, Leung, Pak Sing (Ken) and Njuguna, James (2021) Drilling oil-based mud waste as a resource for raw materials: A case study on clays reclamation and their application as fillers in polyamide 6 composites. Upstream Oil and Gas Technology, 7. p. 100036. ISSN 2666-2604

Ebrahim, Hesham, Dominy, Robert and Leung, Ken (2017) Evaluation of vehicle platooning aerodynamics using bluff body wake generators and CFD. In: 2016 International Conference for Students on Applied Engineering (ISCAE): Newcastle upon Tyne, United Kingdom, 20–21 October 2016. IEEE, Piscataway, NJ, pp. 218-223. ISBN 9781467390286, 9781467390538

Lopez, Isbelis, Leung, Ken, Inam, Fawad, Till, Clare and Paulsen, Andreas (2017) Mechanical characterization of protective coatings for offshore wind turbine towers and transition pieces. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 303-307. ISBN 978-1-4673-9028-6

Perera, Noel, Oriaifo, Aigbokhaebho, Guy, Alan, Leung, Pak Sing and Tan, Kian (2015) Investigating the accelerated test condition to produce cracking failure of water ballast tank coatings. In: The 6th International Congress of Energy and Environment Engineering and Management (CIIEM15),, 22-24 July 2015, Paris.

Pratumnopharat, Panu, Leung, Pak Sing and Court, Richard (2014) Wavelet transform-based stress-time history editing of horizontal axis wind turbine blades. Renewable Energy, 63. pp. 558-575. ISSN 0960-1481

Oriaifo, Emmanuel, Perera, Noel, Guy, Alan, Leung, Pak Sing and Tan, Kian (2014) A review of test protocols for assessing coating performance of water ballast tank coatings. In: The ICMNE 2014: XII International Conference on Marine and Naval Engineering, 29th - 30th September 2014, Istanbul, Turkey.

Pratumnopharat, Panu, Leung, Pak Sing and Court, Richard (2013) Extracting fatigue damage parts from the stress–time history of horizontal axis wind turbine blades. Renewable Energy, 58. pp. 115-126. ISSN 0960-1481

Ameli, Masoud, Agnew, Brian, Leung, Pak Sing, Ng, Bobo, Sutcliffe, C. J., Singh, J. and McGlen, R. J. (2013) A novel method for manufacturing sintered aluminium heat pipes (SAHP). Applied Thermal Engineering, 52 (2). pp. 498-504. ISSN 1359-4311

Danaher, Sean, Dudziak, Tomasz, Datta, Psantu, Hasan, Reaz and Leung, Pak Sing (2013) Long-term oxidation of newly developed HIPIMS and PVD coatings with neural network prediction modelling. Corrosion Science, 69. pp. 322-337. ISSN 0010-938X

Narayana, Mahinsasa, Putrus, Ghanim, Jovanovic, Milutin, Leung, Pak Sing and McDonald, Stephen (2012) Generic maximum power point tracking controller for small-scale wind turbines. Renewable Energy, 44. pp. 72-79. ISSN 0960-1481

Putrus, Ghanim, Narayana, Mahinsasa, Jovanovic, Milutin and Leung, Pak Sing (2009) Maximum power point tracking for variable-speed fixed-pitch small wind turbines. In: Proceedings of the 20th International Conference and Exhibition on Electricity Distribution (CIRED 2009). IEEE, Piscataway, NJ, pp. 542-546. ISBN 978-1849191265

Ahmed, I.L.M., Leung, Pak Sing and Datta, Psantu (2002) Coated rotor and slotted pad in a good interactions. In: 20th Annual Brake Colloquium And Exhibition, 6-9 October 2002, Phoenix, AZ.