Items where Author is "Maheri, Alireza"

Article

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2018) Dynamic simulation of machining composites using the explicit element-free Galerkin method. Composite Structures, 198. pp. 156-173. ISSN 0263-8223

Stylianidis, Nearchos, Azimov, Ulugbek, Maheri, Alireza, Tomita, Eiji and Kawahara, Nobuyuki (2017) Chemical kinetics and CFD analysis of supercharged micro-pilot ignited dual-fuel engine combustion of syngas. Fuel, 203. pp. 591-606. ISSN 0016-2361

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) Meshfree formulation for modelling of orthogonal cutting of composites. Composite Structures, 166. pp. 193-201. ISSN 0263-8223

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) An Investigation into the Dependency of Cutting Forces on the Volume Fraction and Fibre Orientation during Machining Composite Materials. Materials Science Forum, 882. pp. 61-65. ISSN 1662-9752

MacQuart, Terence, Maheri, Alireza and Busawon, Krishna (2016) A decoupling control strategy for wind turbine blades equipped with active flow controllers. Wind Energy, 20 (4). pp. 569-584. ISSN 1095-4244

Kamjoo, Azadeh, Maheri, Alireza, Dizqah, Arash and Putrus, Ghanim (2016) Multi-objective design under uncertainties of hybrid renewable energy system using NSGA-II and chance constrained programming. International Journal of Electrical Power & Energy Systems, 74. 187 - 194. ISSN 0142-0615

Macquart, Terence and Maheri, Alireza (2015) Integrated aeroelastic and control analysis of wind turbine blades equipped with microtabs. Renewable Energy, 75. pp. 102-114. ISSN 0960-1481

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2015) Standalone DC microgrids as complementarity dynamical systems: Modeling and applications. Control Engineering Practice, 35. pp. 102-112. ISSN 0967-0661

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Procedia Engineering, 132. pp. 569-576. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) A multivariable optimal energy management strategy for standalone DC microgrids. IEEE Transactions on Power Systems, 30 (5). pp. 2278-2287. ISSN 0885-8950

Maheri, Alireza (2014) A critical evaluation of deterministic methods in size optimisation of reliable and cost effective standalone Hybrid renewable energy systems. Reliability Engineering & System Safety, 130. pp. 159-174. ISSN 0951-8320

Wiratama, I. Kade and Maheri, Alireza (2014) Optimal design of wind turbine blades equipped with flaps. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1511-1515. ISSN 1819-6608

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2014) An accurate method for the PV Model identification based on a genetic algorithm and the interior-point method. Renewable Energy, 72. pp. 212-222. ISSN 0960-1481

Maheri, Alireza (2014) Multi-objective design optimisation of standalone hybrid wind-PV-diesel systems under uncertainties. Renewable Energy, 66. pp. 650-661. ISSN 0960-1481

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) Microtab dynamic modelling for wind turbine blade load rejection. Renewable Energy, 64. pp. 144-152. ISSN 0960-1481

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2014) Chance constrained programming using non-Gaussian joint distribution function in design of standalone hybrid renewable energy systems. Energy, 66. pp. 677-688. ISSN 0360-5442

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Maheri, Alireza and Lee, Jaehong (2014) Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory. Engineering Structures, 64. 12 - 22. ISSN 0141-0296

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) Modelling and simulation of standalone solar power systems. International Journal of Computational Methods and Experimental Measurements, 2 (1). pp. 107-125. ISSN 2046-0554

Maheri, Alireza and Isikveren, Askin (2013) Educated search-A generic platform for partial modification at conceptual design phase of multidisciplinary problems. Computer-Aided Design, 45 (6). pp. 991-1004. ISSN 0010-4485

Safari, Davoud, Maheri, Mahmoud and Maheri, Alireza (2013) On the performance of a modified multiple-deme genetic algorithm in LRFD design of steel frames. Iranian Journal of Science and Technology:Transactions of Civil Engineering, 37 (2). pp. 169-190. ISSN 2228-6160

Maheri, Alireza (2012) A finite element suite for deformation analysis of composite aeroelastic structures subjected to operational aerodynamic loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (8). pp. 2062-2076. ISSN 0954-4062

Beaverstock, Christopher, Richardson, Thomas, Maheri, Alireza and Isikveren, Askin (2012) Integrated flight control system development using CEASIOM. Canadian Aeronautics and Space Journal, 58 (1). pp. 29-46. ISSN 1712-7998

Maheri, Alireza and Maheri, Mahmoud (2012) A robust method for integrated design of trusses supporting distributed loads. Engineering Structures, 40. pp. 339-349. ISSN 0141-0296

Richardson, Thomas, Beaverstock, Christopher, Isikveren, Askin, Maheri, Alireza, Badcock, Ken and Da Ronch, Andrea (2011) Analysis of the Boeing 747-100 using CEASIOM. Progress in Aerospace Sciences, 47 (8). pp. 660-673. ISSN 0376-0421

Maheri, Alireza and Isikveren, Askin (2011) Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1633-1643. ISSN 0954-4062

Maheri, Mahmoud, Maheri, Alireza, Pourfallah, Saeed, Azarm, Ramin and Hadjipour, Akbar (2011) Improving the durability of straw-reinforced clay plaster cladding for earthen buildings. International Journal of Architectural Heritage, 5 (3). pp. 349-366. ISSN 1558-3058

Safari, Davoud, Maheri, Alireza and Maheri, Mahmoud (2011) Optimum design of steel frames using a multiple-deme GA with improved reproduction operators. Journal of Constructional Steel Research, 67 (8). pp. 1232-1243. ISSN 1873-5983

Niroomandi, Arsalan, Maheri, Alireza, Maheri, Mahmoud and Mahini, Saeed (2010) Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets. Engineering Structures, 32 (8). pp. 2326-2336. ISSN 0141-0296

Maheri, Alireza and Isikveren, Askin (2010) Performance prediction of wind turbines utilizing passive smart blades: approaches and evaluation. Wind Energy, 12 (2/3). pp. 255-265. ISSN 1095-4244

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2007) Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32 (1). pp. 95-104. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Application of combined analytical/FEA coupled aero-structure simulation in design of wind turbine adaptive blades. Renewable Energy, 32 (12). pp. 2011-2018. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Combined analytical/FEA-based coupled aero structure simulation of a wind turbine with bend–twist adaptive blades. Renewable Energy, 32 (6). pp. 916-930. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Decoupled aerodynamic and structural design of wind turbine adaptive blades. Renewable Energy, 32 (10). pp. 1753-1767. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31 (11). pp. 1673-1685. ISSN 0960-1481

Razmjoo, Armin, Ghazanfari, Arezoo, Jahangiri, Mehdi, Franklin, Evan, Denai, Mouloud, Marzband, Mousa, Astiaso Garcia, Davide and Maheri, Alireza (0202) A Comprehensive Study on the Expansion of Electric Vehicles in Europe. Applied Sciences, 12 (22). p. 11656. ISSN 2076-3417

Book Section

Ekoh, Solomon, Unsal, Ibrahim and Maheri, Alireza (2016) Optimal sizing of wind-PV-pumped hydro energy storage systems. In: Proceedings of the 4th International Symposium on Environmental Friendly Energies and Applications (EFEA). IEEE, pp. 1-6. ISBN 978-1-5090-0749-3

Chen, Chin-Fan, Wang, Chi-Jo, Maheri, Alireza and Macquart, Terence (2016) Wind turbine blade load alleviation performance employing individual pitch control. In: Proceedings of the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014). Lecture Notes in Electrical Engineering, 345 . Springer, London, pp. 215-224. ISBN 9783319173139

Maheri, Alireza (2014) Atypical design optimisation of structures: case studies. In: High Performance and Optimum Design of Structures and Materials. WIT Transactions on The Built Environment, 137 . WIT Press, WIT Transactions on The Built Environment, pp. 419-430. ISBN 978-1845647742

Maheri, Alireza (2013) Utilising implanted carbon fibre as a resistive heating element in wind turbine blade anti-icing systems. In: Materials Characterisation VI: Computational Methods and Experiments. WIT Transactions on Engineering Sciences, VI . WIT Press, Southampton, pp. 297-307. ISBN 978-1845647209

Maheri, Alireza, Bagali, Rahul, Chilak, C., Scheller, F. and Mustafa, A. I. (2012) Deterministic versus nondeterministic design of hybrid renewable energy systems. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 212-217. ISBN 978-1467329095

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) Effect of laminate configuration and shell-thickness variation on the inducted twist distribution in wind turbine adaptive blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2012) Improvement of the accuracy of the blade element momentum theory method in wind turbine aerodynamics analysis. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 402-405. ISBN 978-1467329095

Kamjoo, Azadeh, Maheri, Alireza, Putrus, Ghanim and Dizqah, Arash (2012) Multi-Objective Optimisation of Hybrid Wind Turbine - PV Systems. In: Proceedings of the National Solar Conference, 2012. American Solar Energy Society, Colorado. ISBN 9781622760923

Smith, Benjamin and Maheri, Alireza (2012) Optimisation of the efficiency of carbon fibre heating elements implanted in wind turbine blades. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 410-414. ISBN 978-1467329095

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2012) Reliability criteria in optimal sizing of stand-alone hybrid wind-PV-battery bank system. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 184-189. ISBN 978-1467329095

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for deformation analysis of wind turbine adaptive blades. In: High Performance Structure and Materials VI. WIT transactions on the built environment, 124 . WIT Press, Southampton, UK, pp. 13-26. ISBN 978-1845645960

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for frequency analysis of composite wind turbine blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2012) An assessment of solar irradiance stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 670-675. ISBN 978-1467329095

Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2012) An assessment of wind speed stochastic model for the UK. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 623-627. ISBN 978-1467329095

Sedef, Kanber, Maheri, Alireza, Daadbin, Ali and Yilmaz, Mustafa (2012) A comparative study of the performance of DC permanent magnet and AC induction motors in urban electric cars. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 100-105. ISBN 978-1467329095

Maheri, Alireza and Daadbin, Ali (2010) High performance finite element analysis of composite aeroelastic structures. In: High Performance Structures and Materials V. WIT transactions on the built environment, 112 . WIT Press, Southampton, UK, pp. 15-26. ISBN 978-1845644642

Maheri, Alireza and Isikveren, Askin (2008) Variable-state design parameters in design of aero-structures made of intrinsically smart materials. In: High Performance Structures and Materials IV. WIT transactions on the built environment, . WIT Press, Southampton, UK, pp. 421-430. ISBN 978-1845641061

Conference or Workshop Item

Mansour Abadi, Mojtaba, Ghassemlooy, Zabih, Bhatnagar, Manav, Zvanovec, Stanislav, Khalighi, Mohammad-Ali and Maheri, Alireza (2016) Using differential signalling to mitigate pointing errors effect in FSO communication link. In: IEEE International Conference on Communications Workshops (ICC), 23-27 May 2016, Kuala Lumpur.

Hernandez-Somoza, Maria, Christou, Neofytos, Morganti, Manlio and Maheri, Alireza (2015) Design of nanofluid solar collectors. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sahadevan, Subash, Shingate, Suyog and Maheri, Alireza (2015) Effect of dispatch strategy on the performance of hybrid wind-PV-battery-diesel-fuel cell systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Hernandez-Somoza, Maria, Alafogianni, Maria, Stylianidis, Nearchos, Unsal, Ibrahim and Maheri, Alireza (2015) Incorporating end-user requirements in design of hybrid renewable energy systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sedef, Kanber and Maheri, Alireza (2015) Multiobjective route planner for electric car with dijkstra algorithm. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sedef, Kanber and Maheri, Alireza (2015) A driving cycle generating tool for evaluating eco-urban car power performance. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Algabasi, Abdullatif and Maheri, Alireza (2015) A genetic algorithm for solving classical job shop scheduling problems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Omoware, Wisdom, Maheri, Alireza and Azimov, Ulugbek (2014) Aerodynamic analysis of flapping-pitching flat plates. In: 3rd International Symposium on Environmental Friendly Energies and Applications (EFEA), 19-21 November 2014, Paris.

Stylianidis, Nearchos, Macquart, Terence and Maheri, Alireza (2014) Aerodynamic design of wind turbine blades considering manufacturing constraints. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Sedef, Kanber, Maheri, Alireza, Yilmaz, Mustafa and Daadbin, Ali (2014) Performances of AC induction motors with different number of poles in urban electric cars. In: EFEA 2014: 3rd International Symposium on Environmental Friendly Energies and Applications, 19th - 21st November 2014, Paris, France.

Somoza, Maria Hernandez, Macquart, Terence and Maheri, Alireza (2014) Reduction of tidal turbines hydrodynamic loads employing bend-twist adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) A simple method to determine the optimal location of active flow controllers on wind turbine blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Zhang, Hui and Maheri, Alireza (2014) A software tool for optimising structural and material configurations of wind turbine adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.

Corradi, Marco, Maheri, Alireza and Osofero, Israel (2014) Design of reinforced and unreinforced timber beams under uncertainties. In: CST2014: The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.

Maheri, Alireza, Osofero, Israel and Corradi, Marco (2014) The Effect of Column Length and Size on the Maximum Achievable Load Carrying Capacity of Prestressed Stayed Columns. In: CST2014 The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.

Maheri, Alireza, Osofero, Israel and Corradi, Marco (2014) Effect of Cross Arm and Stay Geometry on the Optimum Load Carrying Capacity of Prestressed Stayed Struts. In: CST2014: The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.

Bagali, Rahul, Zhang, Li and Maheri, Alireza (2013) Effect of different bend-twist coupling topologies on induced twist and cost of wind turbine adaptive blades. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Kawash, F. and Maheri, Alireza (2013) Updated cost modeling of hybrid renewable energy system components. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Kahwash, Fadi and Maheri, Alireza (2013) A genetic algorithm for optimal distribution of aerofoils on wind turbine blades. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2013) Acausal Modelling and Dynamic Simulation of the Standalone Wind-Solar Plant using Modelica. In: 15th International Conference on Computer Modelling and Simulation (UKSIM 2013), 10-12 April 2013, Cambridge, UK.

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2013) Modeling and Simulation of a Combined Solar and Wind Energy System using OpenModelica. In: 5th OpenModelica / 7th MODPROD Annual Workshops, 4-7 February 2013, Linkoping, Sweden.

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2013) Wind speed and solar irradiance variation simulation using ARMA models in design of hybrid wind-PV battery system. In: 2nd International Conference on Clean and Green Energy (ICCGE 2013), 19-20 January 2013, Dubai.

Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2012) Optimisation of grid-connected hybrid wind-PV-systems with battery bank storage. In: World Renewable Energy Forum, 13-17 May 2012, Denver, Colorado.

Kamjoo, Azadeh, Maheri, Alireza, Putrus, Ghanim and Dizqah, Arash (2012) Optimal sizing of grid-connected hybrid wind-PV systems with battery bank storage. In: World Renewable Energy Forum (WREF 2012), 13-17 May 2012, Denver, CO.

Maheri, Alireza, Macquart, Terence, Safari, Davoud and Maheri, Mahmoud (2012) Phenotype building blocks and geometric crossover in structural optimisation. In: ECT2012: Eighth international conference on engineering computational technology, 4-7 September 2012, Dubrovnik.

Wiratama, I. Kade and Maheri, Alireza (2011) An investigation into the potential use of microtabs in enhancing energy capture capability of wind turbines. In: 12th International Conference on QiR (Quality in Research), 4 July - 7 July 2011, Bali, Indonesia.

Beaverstock, Christopher, Richardson, Thomas, Isikveren, Askin and Maheri, Alireza (2010) Complete flight control system integration and optimisation from a conceptual design phase. In: 27th Congress of the International Council of the Aeronautical Sciences, 19-24 September 2010, Nice, France.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas and Isikveren, Askin (2009) Integrated hardware and software optimization of conceptual flight control system development. In: Canadian Aeronautics and Space Institute (CASI) Aircraft Design and Development Symposium, 5-8 May 2009, Kanata, Ontario, Canada.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the performance level of ordinary frames using fibre reinforced plastic sheets. In: 8th International Congress on Civil Engineering, 11-13 May 2009, Shiraz University, Shiraz, Iran.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the ductility and seismic behavior factor of ordinary RC frames using fiber composite sheets. In: The 3rd International Conference on Concrete and Development, 27-29 April 2009, Building and Housing Research Center, Tehran, Iran.

Maheri, Alireza and Isikveren, Askin (2009) A parallel genetic algorithm for optimal synthesis of a morphing aerofoil. In: Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering (PARENG2009), 6-8 April 2009, Pécs, Hungary.

Maheri, Alireza and Isikveren, Askin (2009) Design of wind turbine passive smart blades. In: European Wind Energy Conference (EWEC 2009), 16-19 March 2009, Marseille, France.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas, Lowenberg, Mark and Isikveren, Askin (2009) Methods for conceptual flight control system design. In: 47th AIAA Aerospace Sciences Meeting, 5-8 January 2009, Orlando, Florida.

Maheri, Alireza and Isikveren, Askin (2008) Facilitating meta-design techniques for multi-disciplinary conceptual design. In: Adaptive Computing in Design and Manufacture, April 2008, Bristol.

Maheri, Alireza and Maheri, Mahmoud (2007) Optimum geometry design of plane trusses supporting distributed loads using genetic algorithms. In: 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, 18-21 September 2007, Malta.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Damping the fluctuating behaviour and improving the convergence rate of the axial induction factor in the BEMT-based rotor aerodynamic codes. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Single step versus coupled aero-structure simulation of a wind turbine with bend-twist adaptive blades. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) A simple algorithm to modify an ordinary wind turbine blade to an adaptive one. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Book

Rajbhandari, Sujan, Busawon, Krishna, Maheri, Alireza and Djemaï, Mohamed (2012) Proceedings of the 2nd International Symposium On Environment Friendly Energies And Applications (EFEA 2012). IEEE, Piscataway, NJ. ISBN 978-1467329095