Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2009

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Number of items: 95.

Agnew, Brian, Bughazem, Mohamed and Talbi, Mosbah (2009) Improvement of the single shaft combined cycle gas turbine power plant by intake air cooling using an absorption cooler. In: Heat Powered Cycles Conference 2009, 7-9 September, Berlin, Germany.

Agnew, Brian and Janiszewski, Adam (2009) Boiling flows in pourous media. In: 4th International Conference on the Applications of Porous Media (ICAPM 2009), 10 - 12 August 2009, Yeditepe University , Istanbul, Turkey.

Agnew, Brian and Masheiti, Salah (2009) Simulation of water and air cooled Lithium Bromide chillers powered by low temperature geothermal heat source at arid zone area. In: Heat Powered Cycles Conference 2009, 7-9 September, Berlin, Germany.

Akter, Aysha, Wright, Grant, Crapper, Martin and Pender, Garry (2009) Failure Mechanism in Geobag Structure. In: 4th IASME/WSEAS International Conference on Water Resources, Hydraulics and Hydrology (WHH '09), 24-26 February 2009, Cambridge.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas and Isikveren, Askin (2009) Integrated hardware and software optimization of conceptual flight control system development. In: Canadian Aeronautics and Space Institute (CASI) Aircraft Design and Development Symposium, 5-8 May 2009, Kanata, Ontario, Canada.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas, Lowenberg, Mark and Isikveren, Askin (2009) Methods for conceptual flight control system design. In: 47th AIAA Aerospace Sciences Meeting, 5-8 January 2009, Orlando, Florida.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reinforcement of historic masonry: the “Reticolatus” technique. In: Repair, Conservation and Strengthening of Traditionally Erected Buildings and Historic Buildings, 2 - 4 December 2009, Wroclaw, Poland.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reinforcement of historic masonry: the “Reticolatus” technique. In: IF CRASC 2009 Congress on Forensic Engineering Congress on Collapses, Reliability and Retrofit of Constructions, 2nd - 4th December 2009, Naples, Italy.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reticolatus: una tecnica di rinforzo di murature irregolari mediante una maglia continua di trefoli metallici. L'Edilizia, 22. pp. 24-34. ISSN 1593-3970

Burluka, Alexey, Griffiths, J. F., Liu, Kexin and Ormsby, M. (2009) Experimental studies of the role of chemical kinetics in turbulent flames. Combustion, Explosion, and Shock Waves, 45 (4). pp. 383-391. ISSN 0010-5082

Butt, Talib E., Clark, M., Coulon, F. and Oduyemi, K. O. K. (2009) A review of literature and computer models on exposure assessment. Environmental Technology, 30 (14). pp. 1487-1501. ISSN 0959-3330

Chan, Paul and Littlemore, Michelle (2009) Exploring the 'hidden' in organisations: methodological challenges in construction management research. In: CIB Joint International Symposium 2009 - Construction facing worldwide challenges, 27 September - 1 October 2009, Dubrovnik, Croatia.

Chan, Paul and Moehler, Robert (2009) Formal and informal systems of VET: implications for employee involvement. Construction Labour Research News, 1. pp. 18-20. ISSN 1997-1745

Cheung, Wai Ming (2009) Book review: Electronic Waste Management. Journal Of Engineering Manufacture - Part B, 223 (11). pp. 1505-1506. ISSN 0954-4054

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2009) Data Modelling and Optimization in Cost Estimation for Innovative Low Volume Product Development. In: ICMR'09 - 7th International Conference on Manufacturing Research, 8th - 10th September 2009, Warwick, UK.

Choudhuri, Bhaskar, Maguire, Stuart and Ojiako, Udechukwu (2009) Revisiting learning outcomes from market led ICT outsourcing. Business process management journal, 15 (4). pp. 569-587. ISSN 1463-7154

Cleall, P., Jones, M., Thomas, H. R., Kapelan, Z., Dorini, G., Hutchings, Tony R., Sinnett, Danielle, Swithenbank, J., Sharifi, V., Fletcher, Tony, Chalabi, Zaid, Vardoulakis, Sotiris, Tiwary, Abhishek and Azapagic, Adisa (2009) Development of a Software Based Decision Support Platform for Assessing the Impacts of Urban Pollutants. In: ISEE 21st Annual Conference, 25-29 August 2009, Dublin.

Collins, Andrew (2009) RCUK Security Forum: Poverty and security workshop. In: Global Uncertainties: security for all in a changing world, 16 July 2009, London, UK.

Corradi, Sandro, Isidori, Tatiana, Corradi, Marco, Soleri, Fabio and Olivari, Luca (2009) Composite boat hulls with bamboo natural fibres. International Journal of Materials and Product Technology, 36 (1-4). pp. 73-89. ISSN 0268-1900

Daws, Michael, Johansen, Eric and Osborne, Allan (2009) Releasing the power: research led learning in a professional practice undergraduate curriculum. Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment. ISSN 1756-2473

Dusza, Ján, Blugan, Gurdial, Morgiel, Jerzy, Kuebler, Jakob, Inam, Fawad, Peijs, Ton, Reece, Michael and Puchy, Viktor (2009) Hot pressed and spark plasma sintered zirconia/carbon nanofiber composites. Journal of the European Ceramic Society, 29 (15). pp. 3177-3184. ISSN 0955-2219

Duursma, Gail, Crapper, Martin, Whitelaw, S., Wong, WaiSam and McMullan, K. (2009) DEM-CFD Modelling of Voidage and Heat Transfer in Fluidized Beds. In: 8th World Congress of Chemical Engineering (WCCE8), 23-27 August 2009, Montreal.

Elliot, Kevin (2009) A pedagogy for work-based learning at level 5 for foundation degree studies in architectural technology and construction management. Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment, 2 (1). pp. 56-63. ISSN 1756-2473

Elmarakbi, Ahmed (2009) Development of Mathematical Models for Evaluating Child Occupant Impact Dynamics and Intrusions of the Vehicle Structure. In: IMECE 2008 - 2008 ASME International Mechanical Engineering Congress and Exposition, 31st October - 6th November 2008, Boston, MA, United States.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, H. (2009) Finite element simulation of delamination growth in composite materials using LS-DYNA. Composites Science and Technology, 69 (14). pp. 2383-2391. ISSN 0266-3538

Fraser, Minnie (2009) Increasing thermal mass in lightweight dwellings using phase change materials – a literature review. Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment, 2 (2). pp. 69-83. ISSN 1756-2473

Gonzalez Sanchez, Sergio, Figueroa, Ignacio and Todd, Iain (2009) Influence of minor alloying additions on the glass-forming ability of Mg–Ni–La bulk metallic glasses. Journal of Alloys and Compounds, 484 (1-2). pp. 612-618. ISSN 0925 8388

Gonzalez Sanchez, Sergio, Figueroa, Ignacio, Zhao, H., Davies, H. A., Todd, I. and Adeva, Paloma (2009) Effect of mischmetal substitution on the glass-forming ability of Mg–Ni–La bulk metallic glasses. Intermetallics, 17 (11). pp. 968-971. ISSN 0966 9795

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2009) Mechanical properties of Mg-Li-Cu-Y metallic glass composites. In: 1st WPI Annual Workshop, 1-6 March 2009, Sendai, Japan.

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2009) Mechanical properties of Mg-Li-Cu-Y metallic glass composites. In: 16th International Symposium on Metastable Amorphous and Nanostructured Materials (ISMANAM 2009), 5-9 July 2009, Beijing, China.

Greenwood, David and Fazel, D. (2009) Application of a heuristic algorithm for efficient resource scheduling: a case study. In: Fifth International Conference on Construction in the 21st Century, 20-22 May 2009, Istanbul.

Greenwood, David, Lowery, David, Theobald, Kate and Walker, Sara (2009) Behavioural challenges on the exploitation of low-carbon domestic energy technologies. In: International Conference on Sustainable Construction, 9-12 March 2009, Cairo, Egypt.

Hamza, Neveen and Greenwood, David (2009) Energy conservation regulations: impacts on design and procurement of low energy buildings. Building and Environment, 44 (5). pp. 929-936. ISSN 0360-1323

Howarth, Tim (2009) Designers' health and safety risk assessment practice: a case study of a UK architectural practice. In: CIB W099 Conference 2009, 21-23 October 2009, Melbourne.

Howarth, Tim (2009) Using inquiry-based learning and multimedia innovation to enhance construction site hazard management education. In: CIB W099 Conference 2009, 21-23 October 2009, Melbourne.

Howarth, Tim and Porri, Samantha (2009) An investigation of safety climate within a large UK main contracting construction industry. In: CIB W099 Conference 2009, 21-23 October 2009, Melbourne.

Hughes, P. N., Glendinning, S., Mendes, Joao, Parkin, G., Toll, D. G., Gallipoli, D. and Miller, P. E. (2009) Full-scale testing to assess climate effects on embankments. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 162 (2). pp. 67-79. ISSN 1478-4629

Inam, Fawad (2009) Ceramic – carbon nanotube nanocomposites. In: Young Persons' Lecture Competition (Workshop) - London Local Heat (YPLC 2009), 14 February 2009, London Materials Society, IoM3, London, UK.

Jackson, Heather, Daniel, Doni, Clegg, William, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, de Bruycker, Franck, Boboridis, Konstantinos and Lee, William Edward (2009) Laser melting of spark plasma sintered zirconium carbide: thermophysical properties of a generation IV very high temperature reactor material. In: Ceramics in Nuclear Applications. Wiley, Hoboken, pp. 161-172. ISBN 978-0-470-457603

Jackson, Heather, Jayaseelan, Daniel, Lee, William Edward, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti, de Bruycker, Franck and Boboridis, Konstantinos (2009) Laser melting of spark plasma-sintered zirconium carbide: thermophysical properties of a generation IV very high-temperature reactor material. International Journal of Applied Ceramic Technology, 7 (3). pp. 316-326. ISSN 1546-542X

Lavelle, Derek and Bardon, Andrew (2009) E-tendering in construction: time for a change? Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment, 2 (2). pp. 104-112. ISSN 1756-2473

Li, Yifan, Flynn, Brian, Parkes, William, Liu, Yufei, Feng, Y., Ruthven, Alec, Terry, Jonathan, Haworth, Les, Bunting, A. and Stevenson, J. (2009) The integration of EWOD and SAW technologies for improved droplet manipulation and mixing. In: Solid State Device Research Conference (ESSDERC'09), 14-18 September 2009, Athens.

Li, Yifan, Mita, Yoshio, Haworth, Les, Parkes, William, Kubota, Masanori and Walton, Anthony (2009) Test structure for characterizing low voltage coplanar EWOD system. IEEE Transactions on Semiconductor Manufacturing, 22 (1). pp. 88-95. ISSN 0894-6507

Littlemore, Michelle and Chan, Paul (2009) Recognising and rewarding innovation in construction: exploring disconnections in managerial discourse. In: Global Innovation in Construction Conference, 13-16 September 2009, Loughborough University, Loughborough, United Kingdom.

Longstaff, Doug and Johansen, Eric (2009) Mobile phones in project management: The pendulum of professionalism. In: ARCOM 25th Annual Conference, 7th - 9th September 2009, Nottingham, UK.

Lukman, Rebeka, Tiwary, Abhishek and Azapagic, Adisa (2009) Towards greening a university campus: the case of the University of Maribor, Slovenia. Resources, Conservation and Recycling, 53 (11). pp. 639-644. ISSN 0921-3449

Luo, J. K., Fu, Yong Qing, Li, Yifan, Du, X.Y., Flewitt, Andrew, Walton, Anthony and Milne, William (2009) Moving-part-free microfluidic systems for lab-on-a-chip. Journal of Micromechanics and Microengineering, 19 (5). 054001. ISSN 0960-1317

Maheri, Alireza and Isikveren, Askin (2009) Design of wind turbine passive smart blades. In: European Wind Energy Conference (EWEC 2009), 16-19 March 2009, Marseille, France.

Maheri, Alireza and Isikveren, Askin (2009) A parallel genetic algorithm for optimal synthesis of a morphing aerofoil. In: Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering (PARENG2009), 6-8 April 2009, Pécs, Hungary.

Mita, Yoshio, Li, Yifan, Kubota, Masanori, Morishita, S., Parkes, William, Haworth, Les, Flynn, Brian, Terry, Jonathan, Tang, T. and Ruthven, Alec (2009) Demonstration of a wireless driven MEMS pond skater that uses EWOD technology. Solid-State Electronics, 53 (7). pp. 798-802. ISSN 0038-1101

Moehler, Robert and Chan, Paul (2009) Construction skills development: formal versus informal system? In: North East Research Conference, Northumbria University.

Morishita, S., Kim, Joungho, Marty, F., Li, Yifan, Walton, Anthony and Mita, Yoshio (2009) A three-dimensional silicon shadowmask for patterning on trenches with vertical walls. In: Solid-State Sensors, Actuators and Microsystems Conference, 2009. TRANSDUCERS 2009. International. IEEE, Piscataway, NJ, pp. 1608-1611. ISBN 978-1-4244-4190-7

Ng, Bobo, Underwood, Chris and Walker, Sara (2009) Numerical modelling of multiple standing column wells for heating and cooling buildings. In: Eleventh International IBPSA Conference, 27-30 July 2009, Glasgow.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the ductility and seismic behavior factor of ordinary RC frames using fiber composite sheets. In: The 3rd International Conference on Concrete and Development, 27-29 April 2009, Building and Housing Research Center, Tehran, Iran.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the performance level of ordinary frames using fibre reinforced plastic sheets. In: 8th International Congress on Civil Engineering, 11-13 May 2009, Shiraz University, Shiraz, Iran.

Nomden, Harm, Greenwood, David, Horne, Margaret, Muizelaar, Thijs and Thompson, Emine Mine (2009) Traffic simulation in 3D world. Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment, 2 (1). pp. 26-38. ISSN 1756-2473

Odeyinka, Henry, Kelly, Shane and Perera, Srinath (2009) An evaluation of the budgetary reliability of bills of quantities. In: COBRA 2009, 10-11 September 2009, University of Cape Town.

Ojiako, Udechukwu, Maguire, Stuart and Guo, Shuting (2009) Global operations management during major change: an exploration of industrial practice. Business Process Management Journal, 15 (5). pp. 816-839. ISSN 1463-7154

Puchy, Viktor, Dusza, Ján, Blugan, Gurdial, Morgiel, Jerzy, Kuebler, Jakob, Inam, Fawad, Peijs, Ton and Reece, Michael (2009) Microstructure and properties of zirconia/carbon nanofiber composites. In: The Eighth Students' Meeting on Processing and Applications of Ceramics (SM 2009), 2-5 December, 2009, Novi Sad, Serbia.

Pérez, Pablo, Gonzalez Sanchez, Sergio, Garcés, Gerardo and Adeva, Paloma (2009) Influence of mischmetal composition on crystallization and mechanical properties of Mg80–Ni10–MM10 alloys. Intermetallics, 17 (7). pp. 504-511. ISSN 0966 9795

Pérez, Pablo, Milička, Karel, Badía, Jose Maria, Garcés, Gerardo, Antoranz Pérez, Juan Manuel, Gonzalez Sanchez, Sergio, Dobeš, Ferdinand and Adeva, Paloma (2009) Thermal Stability and Creep Behaviour of MgNiYCe-Rich Mischmetal Alloys Processed by a Powder Metallurgy Route. Defect and Diffusion Forum, 289-92. pp. 127-136. ISSN 1662-9507

Rahman, Sazzadur, Perera, Srinath, Odeyinka, Henry and Bi, Yaxin (2009) A knowledge-based decision support system for roofing materials selection and cost estimating: a conceptual framework and data modelling. In: 25th Annual ARCOM Conference, 7-9 September 2009, Nottingham, United Kingdom.

Rahman, Sazzadur, Perera, Srinath, Odeyinka, Henry and Bi, Yaxin (2009) A knowledge-based decision support system for roofing materials selection. In: COBRA 2009, 10-11 September 2009, University of Cape Town.

Richardson, Alan, Coventry, Kathryn and Graham, Sue (2009) Concrete manufacture with un-graded recycled aggregates. Structural Survey, 27 (1). pp. 62-70. ISSN 0263-080X

Richardson, Alan, Coventry, Kathryn and Landless, Sean (2009) Synthetic and steel fibres - a comparative study. Concrete. ISSN 0010-5317

Richardson, Alan and Landless, Sean (2009) Synthetic fibres and steel fibres in concrete with regard to bond strength and toughness. Northumbria Working Paper Series: Interdisciplinary Studies in the Built and Virtual Environment, 2 (2). pp. 128-140. ISSN 1756-2473

Richardson, Alan, Walker, Sara and Hart, A. (2009) Comparative thermal performance test for GGBS and OPC concrete mixes. In: Ecozoom: International conference on sustainability in building, 25-27 November 2009, VIA University College, Denmark.

Richardson, Alan, Walker, Sara and Hart, A. (2009) Thermal performance tests for GGBS and PC concretes. Concrete. ISSN 0010-5317

Richardson, Alan and Wilkinson, Sean (2009) Early life freeze/thaw tests on concrete with varying types of fibre content. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, 13-15 July 2009, Sydney, Australia.

Shyha, Islam (2009) Experimental study of small hole drilling in diverse CFRP laminate configurations. In: The 9th International Conference on Production Engineering, Design and Control (PEDAC 2009), 10-12 February 2009, Alexandria, Egypt.

Shyha, Islam (2009) Small hole drilling of carbon fibre composites using diamond coated drills. In: Efficient & Low Carbon Manufacturing: proceedings of the 26th International Manufacturing Conference (IMC26). Trinity College Dublin, Dublin, Ireland, pp. 87-94. ISBN 978-0956230386

Shyha, Islam, Aspinwall, David, Soo, Sein Leung and Bradley, Sam (2009) Drill geometry and operating effects when cutting small diameter holes in CFRP. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 12-13. ISSN 0890-6955

Tang, C., Blacklock, Matthew and Hayhurst, David (2009) Uni-axial stress-strain response and thermal conductivity degradation of ceramic matrix composite fibre tows. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 465 (2109). pp. 2849-2876. ISSN 1364-5021

Tao, Zhi, Zhao, Zhenming, Ding, Shuiting, Xu, Guoqiang and Wu, Hongwei (2009) Suitability of Three Different Two-equation Turbulent Models in Predicting Film Cooling Performance Over a Rotating Blade. International Journal of Heat and Mass Transfer, 52 (5-6). pp. 1268-1275. ISSN 0017-9310

Tiwary, Abhishek and Colls, Jeremy (2009) Air pollution: measurement, modelling and mitigation [3rd Ed.]. Taylor & Francis, Abingdon. ISBN 9780415479332

Tiwary, Abhishek, Sinnett, Danielle, Peachey, Christopher, Chalabi, Zaid, Vardoulakis, Sotiris, Fletcher, Tony, Leonardi, Giovanni, Grundy, Chris, Azapagic, Adisa and Hutchings, Tony R. (2009) An integrated tool to assess the role of new planting in PM10 capture and the human health benefits: A case study in London. Environmental Pollution, 157 (10). pp. 2645-2653. ISSN 0269-7491

Vahidi, Ramesh and Greenwood, David (2009) Triangles, tradeoffs and success: A critical examination of some traditional project management paradigms. In: CIB Joint International Symposium 2009-Construction Facing Worldwide Challenges, 27 September - 1 October 2009, Dubrovnik.

Vardoulakis, Sotiris, Cleall, P., Sinnett, Danielle, Chen, Q., Tiwary, Abhishek, Li, Y -C., De Munck, C. S., Chalabi, Zaid, Sharifi, V., Gummeneni, S., Hutchings, Tony R., Fletcher, Tony, Leonardi, Giovanni and Azapagic, Adisa (2009) Assessment of Health and Ecological Impact of Policy on a Legacy Contamination Case Study. In: ISEE 21st Annual Conference, 25-29 August 2009, Dublin.

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional behavior of thin-walled composite space frames. International Journal of Mechanical Sciences, 51 (11–12). 837 - 845. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional coupled vibration and buckling of thin-walled open section composite beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 51 (9-10). 631 - 641. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2009) Free vibration of axially loaded thin-walled composite box beams. Composite Structures, 90 (2). 233 - 241. ISSN 1879-1085

Vo, Thuc and Lee, Jaehong (2009) Geometrically nonlinear analysis of thin-walled composite box beams. Computers & Structures, 87 (3–4). 236 - 245. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2009) On sixfold coupled buckling of thin-walled composite beams. Composite Structures, 90 (3). 295 - 303. ISSN 0263-8223

Vo, Thuc, Lee, Jaehong and Ahn, Namshik (2009) On sixfold coupled vibrations of thin-walled composite box beams. Composite Structures, 89 (4). 524 - 535. ISSN 0263-8223

Walker, Alan, Greenwood, David and Johansen, Eric (2009) The lack of design quality focus in construction: a case for examining suitable design processes. In: Proceedings 25th Annual ARCOM Conference. Association of Researchers in Construction Management (ARCOM), Reading, pp. 319-328. ISBN 9780955239014

Walker, Sara (2009) Behavioural challenges in the pursuit of low-carbon energy technologies in the domestic sector. In: RIBA Conference: Delivering sustainable homes, 18 November 2009, Newcastle Upon Tyne.

Walker, Sara (2009) Renewable energy: a review of the technologies for buildings. In: Realising Zero-Carbon Buildings, 27 February 2008, Northumbria University, Newcastle upon Tyne, UK.

Warren, Craig and Giannopoulos, Antonios (2009) Optimising models of commercial GPR antennas. In: IWAGPR2009 - 5th International Workshop on Advanced Ground Penetrating Radar, 27th - 29th May 2009, Granada, Spain.

Wu, Tong and Crapper, Martin (2009) Simulation of biopile processes using a hydraulics approach. Journal of Hazardous Materials, 171 (1-3). pp. 1103-1111. ISSN 0304 3894

Wu, Tong and Crapper, Martin (2009) A computational fluid dynamics based model of the ex-situ remediation of hydrocarbon contaminated soils. Desalination, 248 (1-3). pp. 262-270. ISSN 0011 9164

Xu, Ben and Fu, Yong Qing (2009) Polystyrene based shape memory nanocomposites. In: ICCM-17: 17th International Conference on Composite Materials, 27-31 July 2009, Edinburgh, UK.

Xu, Ben, Fu, Yong Qing, Kraft, Arno, Reuben, Robert and Huang, Wei Min (2009) Polyurethane/nano-clay shape memory polymer nanocomposites. In: Hybrid Materials 2009: 1st International Conference on Multifunctional, Hybrid and Nanomaterials, 15-19 March 2009, Tours, France.

Xu, Ben, Huang, Wei Min, Pei, Yu Tao, Chen, Zhen Guo, Kraft, Arno, Reuben, Robert, de Hosson, Jeff and Fu, Yong Qing (2009) Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites. European Polymer Journal, 45 (7). pp. 1904-1911. ISSN 0014-3057

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Ding, Shuiting and Wu, Hongwei (2009) Numerical Study of Film-Cooling Performance on a Rotating Model. Journal of Thermophysics and Heat Transfer, 23 (1). pp. 129-138. ISSN 0887-8722

Xu, Guoqiang, Yang, Bin, Tao, Zhi, Zhao, Zhenming and Wu, Hongwei (2009) Local Heat Transfer Measurements on a Rotating Flat Blade Model with a Single Film Hole. Progress in Natural Science: Materials International, 19 (3). pp. 321-330. ISSN 1002-0071

This list was generated on Wed Dec 18 12:18:52 2024 UTC.