Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2014
![]() | Up a level |
Article
Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) A simulation-based approach for material yard laydown planning. Automation in Construction, 40. pp. 1-8. ISSN 0926-5805
Bardin, M. E., El-Dein Hussin, Ahmed, Gushchin, P. A., Vinokurov, V. A. and Burluka, Alexey (2014) Technical Aspects of EthylTert-Butyl Ether (ETBE) for Large-Scale Use as Gasoline Improver. Energy Technology, 2 (2). pp. 194-204. ISSN 2194-4288
Barreno, I., Costa Pereira, Carolina, Cordon, M., Urrutibeascoa, Idoia, Gomez, X. and Mateos, M. (2014) Dynamics of an oscillating Stirling heat pump. Applied Energy, 136. pp. 704-711. ISSN 0306-2619
Bhat, Pooja, Inam, Fawad and Bhat, Badekai Ramachandra (2014) Nickel hydroxide/ cobalt–ferrite magnetic nanocatalyst for alcohol oxidation. ACS Combinatorial Science, 16 (8). pp. 397-402. ISSN 2156-8944
Bhat, Pooja, Inam, Fawad and Bhat, Badekai Ramachandra (2014) Oxidation of alcohols using CoFe204@APTES@Ni(OH)2. Synfacts, Highlights in Current Synthetic Organic Chemistry, 10 (11). p. 1223. ISSN 1861-1958
Borri, Antonio, Castori, Giulio and Corradi, Marco (2014) Strengthening of fair face masonry columns with steel hooping. Materials and Structures, 47 (12). pp. 2117-2130. ISSN 1359-5997
Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Masonry wall panels with GFRP and steel-cord strengthening subjected to cyclic shear: An experimental study. Construction and Building Materials, 56. pp. 63-73. ISSN 09500618
Bortot, Eliana, Springhetti, Roberta and Gei, Massimiliano (2014) Enhanced soft dielectric composite generators: the role of ceramic fillers. Journal of the European Ceramic Society, 34 (11). pp. 2623-2632. ISSN 0955-2219
Butt, Talib E., Gouda, H. M., Baloch, M. I., Paul, P., Javadi, A. A. and Alam, A. (2014) Literature review of baseline study for risk analysis — The landfill leachate case. Environment International, 63. pp. 149-162. ISSN 0160-4120
Butt, Talib E., Heywood, Christopher A., Paul, Parneet and Jones, Keith G. (2014) Sustainability of and Obsolescence in the Built Environment: Two Contrary Notions. Sustainability: The Journal of Record, 7 (2). pp. 116-122. ISSN 1937-0695
Buzzi, Olivier, Sieffert, Y., Mendes, Joao, Liu, Xianfeng, Giacomini, A. and Seedsman, R. (2014) Strength of an Australian Coal Under Low Confinement. Rock Mechanics and Rock Engineering, 47 (6). pp. 2265-2270. ISSN 0723-2632
Chaumeil, Florian and Crapper, Martin (2014) Using the DEM-CFD method to predict Brownian particle deposition in a constricted tube. Particuology, 15. pp. 94-106. ISSN 1674 2001
Chen, Qun, Yang, Ruiming, Zhao, Bo, Li, Yan, Wang, Shujuan, Wu, Hongwei, Zhuo, Yuqun and Chen, Changhe (2014) Investigation of Heat of Biomass Pyrolysis and Secondary Reactions by Simultaneous Thermogravimetry and Differential Scanning Calorimetry. Fuel, 134. pp. 467-476. ISSN 0016-2361
Chen, Xue, Moumni, Ziad, He, Yongjun and Zhang, Weihong (2014) A three-dimensional model of magneto-mechanical behaviors of martensite reorientation in ferromagnetic shape memory alloys. Journal of the Mechanics and Physics of Solids, 64. pp. 249-286. ISSN 0022-5096
Corradi, Marco, Borri, Antonio, Castori, Giulio and Sisti, Romina (2014) Shear strengthening of wall panels through jacketing with cement mortar reinforced by GFRP grids. Composites Part B: Engineering, 64. pp. 33-42. ISSN 13598368
Costa Pereira, Carolina, Barrutia, Harritz, Esnaola, Jon Ander and Tutar, Mustafa (2014) Numerical study of the heat transfer in wound woven wire matrix of a Stirling regenerator. Energy Conversion and Management, 79. pp. 255-264. ISSN 0196-8904
Costa Pereira, Carolina, Tutar, Mustafa, Barreno, Igor, Esnaola, Jon-Ander, Barrutia, Haritz, García, David, González, Miguel-Angel and Prieto, Jesús-Ignacio (2014) Experimental and numerical flow investigation of Stirling engine regenerator. Energy, 72. pp. 800-812. ISSN 0360-5442
Cox, Brian, Bale, Hrishikesh, Begley, Matthew, Blacklock, Matthew, Do, Bao-Chan, Fast, Tony, Naderi, Mehdi, Novak, Mark, Rajan, Varun, Rinaldi, Renaud, Ritchie, Robert, Rossol, Michael, Shaw, John, Sudre, Olivier, Yang, Qingda, Zok, Frank and Marshall, David (2014) Stochastic Virtual Tests for High-Temperature Ceramic Matrix Composites. Annual Review of Materials Research, 44 (1). pp. 479-529. ISSN 1531-7331
Crapper, Martin, Fell, Michael and Gammoh, Imad (2014) Earthworks risk assessment on a heritage railway. Proceedings of the ICE - Geotechnical Engineering, 167 (4). pp. 344-356. ISSN 1353-2618
Daneshmand, Farhang, Farokhi, Hamed and Amabili, Marco (2014) A higher-order mathematical modeling for dynamic behavior of protein microtubule shell structures including shear deformation and small-scale effects. Mathematical Biosciences, 252. pp. 67-82. ISSN 0025-5564
Dizqah, Arash, Maheri, Alireza and Busawon, Krishna (2014) An accurate method for the PV Model identification based on a genetic algorithm and the interior-point method. Renewable Energy, 72. pp. 212-222. ISSN 0960-1481
Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) Modelling and simulation of standalone solar power systems. International Journal of Computational Methods and Experimental Measurements, 2 (1). pp. 107-125. ISSN 2046-0554
Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Kamjoo, Azadeh (2014) A multivariable optimal energy management strategy for standalone DC microgrids. IEEE Transactions on Power Systems, 30 (5). pp. 2278-2287. ISSN 0885-8950
Du, Longhuan, Berson, Arganthaël and Dominy, Robert (2014) Aerofoil behaviour at high angles of attack and at Reynolds numbers appropriate for small wind turbines. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 229 (11). pp. 2007-2022. ISSN 0954-4062
Ebrahimi, Mohammadreza, Crapper, Martin and Ooi, Jin (2014) Experimental and Simulation Studies of Dilute Horizontal Pneumatic Conveying. Particulate Science and Technology, 32 (2). pp. 206-213. ISSN 0272-6351
Emhemad, Haitam, Agnew, Brian and Greenwood, David (2014) Sustainability as a Criterion in the Reconstruction of Libya’s Public Transport Infrastructure. International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering, 8 (7). pp. 2315-2319. ISSN 1307-6892
Furber, Alison, Gillie, Martin, Bisby, Luke, Stratford, Timothy, Crapper, Martin, White, Douglas and Blackford, Jane (2014) Innovative learning at the University of Edinburgh. Proceedings of the ICE - Management, Procurement and Law, 167 (1). pp. 13-24. ISSN 1751-4304
Garcia-Esparza, Angel, Limkrailassiri, Kevin, Leroy, Frederic, Rasul, Shahid, Yu, Weili, Lin, Liwei and Takanabe, Kazuhiro (2014) Photoelectrochemical and electrocatalytic properties of thermally oxidized copper oxide for efficient solar fuel production. Journal of Materials Chemistry A, 2 (20). pp. 7389-7401. ISSN 2050-7488
Ghayesh, Mergen H., Farokhi, Hamed and Amabili, Marco (2014) In-plane and out-of-plane motion characteristics of microbeams with modal interactions. Composites Part B: Engineering, 60. pp. 423-439. ISSN 1359-8368
Gholipour, Alireza, Farokhi, Hamed and Ghayesh, Mergen H. (2014) In-plane and out-of-plane nonlinear size-dependent dynamics of microplates. Nonlinear Dynamics, 79 (3). pp. 1771-1785. ISSN 0924-090X
Ghosal, Dibakar, Singh, S. C. and Martin, James (2014) Shallow subsurface morphotectonics of the NW Sumatra subduction system using an integrated seismic imaging technique. Geophysical Journal International, 198 (3). pp. 1818-1831. ISSN 0956-540X
Glendinning, Stephanie, Hughes, Paul, Helm, Peter, Chambers, Jonathan, Mendes, Joao, Gunn, David, Wilkinson, Paul and Uhlemann, Sebastien (2014) Construction, management and maintenance of embankments used for road and rail infrastructure: implications of weather induced pore water pressures. Acta Geotechnica, 9 (5). pp. 799-816. ISSN 1861-1125
Gonzalez Sanchez, Sergio, Pellicer, Eva, Suriñach, Santiago, Baró, Maria, García-Lecina, E. and Sort, Jordi (2014) Effect of Thermally-Induced Surface Oxidation on the Mechanical Properties and Corrosion Resistance of Zr60Cu25Al10Fe5 Bulk Metallic Glass. Science of Advanced Materials, 6 (1). pp. 27-36. ISSN 1947-2935
Gonzalez Sanchez, Sergio, Pérez, Pablo, Rossinyol, Emma, Suriñach, Santiago, Baró, Maria, Pellicer, Eva and Sort, Jordi (2014) Drastic influence of minor Fe or Co additions on the glass forming ability, martensitic transformations and mechanical properties of shape memory Zr–Cu–Al bulk metallic glass composites. Science and Technology of Advanced Materials, 15 (3). 035015. ISSN 1468-6996
Gonzalez Sanchez, Sergio and Sort, Jordi (2014) Tuning the Corrosion Behavior of Rapidly Solidified and Thermally-annealed Fe-Ti-Pd Alloys. Advances in Alloys and Compounds, 1 (2). pp. 46-53. ISSN 2374-541X
Habchi, Charbel, Khaled, Mahmoud, Lemenand, Thierry, Della Valle, Dominique, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) A semi-analytical approach for temperature distribution in Dean flow. Heat and Mass Transfer, 50 (1). pp. 23-30. ISSN 0947-7411
Habchi, Charbel, Lemenand, Thierry, Valle, Dominique Della, Khaled, Mahmoud, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Mixing assessment by chemical probe. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1411-1420. ISSN 1226-086X
Harvie-Clark, Jack and Siddall, Mark (2014) Problems in residential design for ventilation and noise part 2: Mechanical ventilation. Acoustics Bulletin, 39 (1). pp. 33-37. ISSN 0308-437X
Hikita, Muneaki, Bradford, Robyn and Lafdi, Khalid (2014) Growth and Properties of Carbon Microcoils and Nanocoils. Crystals, 4 (4). pp. 466-489. ISSN 2073-4352
Hounkpe, Sena, Adjovi, Edmond, Crapper, Martin and Awuah, Esi (2014) Wastewater Management in Third World Cities: Case Study of Cotonou, Benin. Journal of Environmental Protection, 05 (05). pp. 387-399. ISSN 2152-2197
Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842
Inam, Fawad, Bhat, Badekai Ramachandra, Luhyna, Nataliia and Vo, Thuc (2014) Comparison of structural health assessment capabilities in epoxy – carbon black and epoxy – carbon nanotube nanocomposites. Express Polymers Letters, 8 (1). pp. 55-61. ISSN 1788-618X
Inam, Fawad, Bhat, Badekai Ramachandra, Vo, Thuc and Daoush, Walid (2014) Structural health monitoring capabilities in ceramic – carbon nanocomposites. Ceramics International, 40 (2). pp. 3793-3798. ISSN 0272-8842
Inam, Fawad, Heaton, Andrew, Brown, Peter, Peijs, Ton and Reece, Michael (2014) Effects of dispersion surfactants on the properties of ceramic – carbon nanotube (CNT) nanocomposites. Ceramics International, 40 (1). pp. 511-516. ISSN 0272-8842
Inam, Fawad, Vo, Thuc and Bhat, Badekai Ramachandra (2014) Structural stability studies of graphene in sintered ceramic nanocomposites. Ceramics International, 40 (10 B). pp. 16227-16233. ISSN 0272-8842
Iyi, Draco, Hasan, Reaz, Penlington, Roger and Underwood, Chris (2014) Double Skin Façade: Modelling Technique and Influence of Venetian Blinds on the Airflow and Heat Transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311
Jiang, Qinghui, Yan, Haixue, Khaliq, Jibran, Ning, Huanpo, Grasso, Salvatore, Simpson, Kevin and Reece, Michael (2014) Large ZT enhancement in hot forged nanostructured p-type Bi0.5Sb1.5Te3 bulk alloys. Journal of Material Chemistry A, 2 (16). pp. 5785-5790. ISSN 2050-7488
Jiang, Qinghui, Yan, Haixue, Khaliq, Jibran, Shen, Yang, Simpson, Kevin and Reece, Michael (2014) Enhancement of thermoelectric properties by atomic-scale percolation in digenite CuxS. Journal of Material Chemistry A, 2. pp. 9486-9489. ISSN 2050-7488
Jiang, Yinzhu, Hu, Meijuan, Zhang, Dan, Yuan, Tianzhi, Sun, Wenping, Xu, Ben and Yan, Mi (2014) Transition metal oxides for high performance sodium ion battery anodes. Nano Energy, 5. pp. 60-66. ISSN 2211-2855
Kamjoo, Azadeh, Maheri, Alireza and Putrus, Ghanim (2014) Chance constrained programming using non-Gaussian joint distribution function in design of standalone hybrid renewable energy systems. Energy, 66. pp. 677-688. ISSN 0360-5442
Kang, Zhe, Yuan, Jinhui, Zhang, Xianting, Wu, Qiang, Sang, Xinzhu, Farrell, Gerald, Yu, Chongxiu, Li, Feng, Tam, Hwa Yaw and Wai, Ping-kong Alexander (2014) CMOS-compatible 2-bit optical spectral quantization scheme using a silicon-nanocrystal-based horizontal slot waveguide. Scientific Reports, 4. p. 7177. ISSN 2045-2322
Karmacharya, Samir, Putrus, Ghanim, Underwood, Chris, Mahkamov, Khamid, McDonald, Stephen and Alexakis, Athanasios (2014) Simulation of energy use in buildings with multiple micro generators. Applied Thermal Engineering, 62 (2). pp. 581-592. ISSN 13594311
Khaled, Mahmoud, Al Shaer, A., Ramadan, Mohamad, Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2014) Sensitivity and applications of a new method for the simultaneous measurement of convective and radiative heat flux in underhood applications—toward multiple versions. Measurement Science and Technology, 25 (3). 035901. ISSN 0957-0233
Khaled, Mahmoud, Habchi, Charbel, Harambat, Fabien, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Leakage effects in car underhood aerothermal management: temperature and heat flux analysis. Heat and Mass Transfer, 50 (10). pp. 1455-1464. ISSN 0947-7411
Khaled, Mahmoud, Ramadan, Mohamad, El-Hage, Hicham, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Review of underhood aerothermal management: Towards vehicle simplified models. Applied Thermal Engineering, 73 (1). pp. 842-858. ISSN 1359-4311
Khaliq, Jibran, Jiang, Qinghui, Yang, Junyou, Simpson, Kevin, Yan, Haixue and Reece, Michael (2014) Utilizing the phonon glass electron crystal concept to improve the thermoelectric properties of combined Yb-stuffed and Te-substituted CoSb3. Scripta Materialia, 72 (Supple). 63 - 66. ISSN 1359-6462
Khan, Fahd, Daadbin, Ali, Persson, Martin and Haider, Julfikar (2014) Development of AlTiN coated carbide bandsaw for machining titanium-17 alloy. International Journal of Surface Science and Engineering, 8 (1). pp. 11-27. ISSN 1749-7868
Ling, Zhengyang, Burluka, Alexey and Azimov, Ulugbek (2014) Knock Properties of Oxygenated Blends in Strongly Charged and Variable Compression Ratio Engines. SAE Technical Papers. pp. 2014-01. ISSN 0148-7191
Luo, Xiang, Han, G., Wu, Hongwei, Wang, L. and Xu, Guoqiang (2014) Experimental Investigation of Pressure Loss and Heat Transfer in a Rotor-Stator Cavity with Two Outlets. International Journal of Heat and Mass Transfer, 78. pp. 311-320. ISSN 0017-9310
Luo, Xiang, Liu, Dongdong, Wu, Hongwei and Tao, Zhi (2014) Particle Image Velocimetry Measurement and Computational Fluid Dynamic Simulations of the Unsteady Flow within a Rotating Disk Cavity. Journal of Engineering for Gas Turbines and Power, 136 (11). p. 112601. ISSN 0742-4795
Luo, Xiang, Wang, L., Zhao, X., Xu, Guoqiang and Wu, Hongwei (2014) Experimental Investigation of Heat Transfer in a Rotor-Stator Cavity with Cooling Air Inlet at Low Radius. International Journal of Heat and Mass Transfer, 76. pp. 65-80. ISSN 0017-9310
Luo, Xiang, Zhao, X., Wang, L., Wu, Hongwei and Xu, Guoqiang (2014) Flow Structure and Heat Transfer Characteristics in Rotor-Stator Cavity with Inlet at Low Radius. Applied Thermal Engineering, 70 (1). pp. 291-306. ISSN 1359-4311
Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) Microtab dynamic modelling for wind turbine blade load rejection. Renewable Energy, 64. pp. 144-152. ISSN 0960-1481
Maheri, Alireza (2014) Multi-objective design optimisation of standalone hybrid wind-PV-diesel systems under uncertainties. Renewable Energy, 66. pp. 650-661. ISSN 0960-1481
Maheri, Alireza (2014) A critical evaluation of deterministic methods in size optimisation of reliable and cost effective standalone Hybrid renewable energy systems. Reliability Engineering & System Safety, 130. pp. 159-174. ISSN 0951-8320
Mankowski, Oliver, Sims-Williams, David and Dominy, Robert (2014) A Wind Tunnel Simulation Facility for On-Road Transients. SAE International Journal of Passenger Cars - Mechanical Systems, 7 (3). pp. 1087-1095. ISSN 1946-4002
Martin, Nick, Bottomley, Michael and Packwood, Alan (2014) Switching of a Bistable Diverter Valve with Synthetic Jet Actuators. AIAA Journal, 52 (7). pp. 1563-1568. ISSN 0001-1452
Nagaratnam, Brabha, Rahman, Muhammad, Mirasa, A. K. and Mannan, M. A. (2014) Workability of Self-Compacting Concrete Using Blended Waste Materials. Advanced Materials Research, 1043. pp. 273-277. ISSN 1662-8985
Namdeo, Anil, Tiwary, Abhishek and Dziurla, R. (2014) Spatial planning of public charging points using multi-dimensional analysis of early adopters of electric vehicles for a city region. Technological Forecasting and Social Change, 89. pp. 188-200. ISSN 0040-1625
Nguyen, Trung-Kien, Vo, Thuc and Thai, Huu-Tai (2014) Vibration and buckling analysis of functionally graded sandwich plates with improved transverse shear stiffness based on the first-order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (12). pp. 2110-2131. ISSN 0954-4062
Nguyen, Van-Hau, Nguyen, Trung-Kien, Thai, Huu-Tai and Vo, Thuc (2014) A new inverse trigonometric shear deformation theory for isotropic and functionally graded sandwich plates. Composites Part B: Engineering, 66. pp. 233-246. ISSN 1359-8368
Oettle, Nicholas, Sims-Williams, David and Dominy, Robert (2014) Assessing the Aeroacoustic Response of a Vehicle to Transient Flow Conditions from the Perspective of a Vehicle Occupant. SAE International Journal of Passenger Cars - Mechanical Systems, 7 (2). pp. 550-558. ISSN 1946-4002
Parva, Mohammad, Dola, Kamariah and Rahimian, Farzad Pour (2014) Transformability in post-earthquake houses in Iran: with special focus on Lar City. International Journal of Humanities and Social Sciences, 8 (1). pp. 249-266. ISSN 2070-3783
Parva, Mohammad and Rahimian, Farzad Pour (2014) Transformability as a Factor of Sustainability in Post-earthquake Houses in Iran: The Case Study of Lar City. Procedia Economics and Finance, 18. pp. 431-438. ISSN 2212-5671
Perepezko, John, Imhoff, Seth, Chen, Ming-Wei, Wang, Jun-Qiang and Gonzalez Sanchez, Sergio (2014) Nucleation of shear bands in amorphous alloys. Proceedings of the National Academy of Sciences, 111 (11). pp. 3938-3942. ISSN 0027-8424
Pillai, Gobind, Putrus, Ghanim, Georgitsioti, Tatiani and Pearsall, Nicola (2014) Near-term economic benefits from grid-connected residential PV (photovoltaic) systems. Energy, 68. pp. 832-843. ISSN 0360-5442
Poologanathan, Keerthan, Mahendran, Mahen and Hughes, David (2014) Numerical studies and design of hollow flange channel beams subject to combined bending and shear actions. Engineering Structures, 75. pp. 197-212. ISSN 0141-0296
Poologanathan, Keerthan, Mahendran, Mahen and Steau, Edward (2014) Experimental study of web crippling behaviour of hollow flange channel beams under two flange load cases. Thin-Walled Structures, 85. pp. 207-219. ISSN 0263-8231
Rahman, Muhammad, Boon, Ang Lye, Muntohar, Agus Setyo, Hashem Tanim, Md Nafeez and Pakrashi, Vikram (2014) Performance of masonry blocks incorporating Palm Oil Fuel Ash. Journal of Cleaner Production, 78. pp. 195-201. ISSN 0959-6526
Rahman, Muhammad, Muntohar, A.S., Pakrashi, V., Nagaratnam, Brabha and Sujan, D. (2014) Self compacting concrete from uncontrolled burning of rice husk and blended fine aggregate. Materials and Design, 55. pp. 410-415. ISSN 0261-3069
Rasul, Shahid, Anjum, Dalaver, Jedidi, Abdesslem, Minenkov, Yury, Cavallo, Luigi and Takanabe, Kazuhiro (2014) A Highly Selective Copper-Indium Bimetallic Electrocatalyst for the Electrochemical Reduction of Aqueous CO² to CO. Angewandte Chemie International Edition, 54 (7). pp. 2146-2150. ISSN 1433-7851
Richardson, Alan and Dias, Eli (2014) Rubber crumb used in concrete to provide freeze-thaw protection (optimum particle size). Concrete, 48 (6). pp. 39-41. ISSN 0010-5317
Ronchi, Gloria and Benghi, Claudio (2014) Interactive light and sound installation using artificial intelligence. International Journal of Arts and Technology, 7 (4). p. 377. ISSN 1754-8853
Shyha, Islam, Kuo, Chun Liang and Soo, Sein Leung (2014) Workpiece surface integrity and productivity when cutting CFRP and GFRP composites using a CO2 laser. International Journal of Mechatronics and Manufacturing Systems, 7 (2/3). pp. 93-107. ISSN 1753-1039
Spiegel, Jonathan, Brüne, Markus, Dering, Nils, Pflitsch, Andreas, Qian, Zi, Agnew, Brian, Paliacin, Roberto and Irving, Malcolm (2014) Propagation of tracer gas in a subway station controlled by natural ventilation. Journal of Heat Island Institute International, 9 (2). pp. 103-107. ISSN 2188-4056
Springhetti, Roberta, Bortot, Eliana, deBotton, Gal and Gei, Massimiliano (2014) Optimal energy-harvesting cycles for load-driven dielectric generators in plane strain. IMA Journal of Applied Mathematics, 79 (5). pp. 929-946. ISSN 0272-4960
Taaffe, Jonathan, O’Sullivan, Seán, Rahman, Muhammad and Pakrashi, Vikram (2014) Experimental characterisation of Polyethylene Terephthalate (PET) bottle Eco-bricks. Materials and Design, 60. pp. 50-56. ISSN 0261-3069
Thai, Huu-Tai, Nguyen, Trung-Kien, Vo, Thuc and Lee, Jaehong (2014) Analysis of functionally graded sandwich plates using a new first-order shear deformation theory. European Journal of Mechanics - A/Solids, 45. pp. 211-225. ISSN 0997-7538
Thai, Huu-Tai, Vo, Thuc, Bui, Tinh and Nguyen, Trung-Kien (2014) A quasi-3D hyperbolic shear deformation theory for functionally graded plates. Acta Mechanica, 225 (3). pp. 951-964. ISSN 0001-5970
Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2014) A nonlocal sinusoidal plate model for micro/nanoscale plates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (14). pp. 2652-2660. ISSN 0954-4062
Tiwary, Abhishek, Chatterton, Tim and Namdeo, Anil (2014) Co-managing carbon and air quality: pros and cons of local sustainability initiatives. Journal of Environmental Planning and Management, 57 (8). pp. 1266-1283. ISSN 0964-0568
Tiwary, Abhishek and Kumar, Prashant (2014) Impact evaluation of green–grey infrastructure interaction on built-space integrity: An emerging perspective to urban ecosystem service. Science of the Total Environment, 487. pp. 350-360. ISSN 0048-9697
Tuling, Sean, Dala, Laurent and Toomer, Chris (2014) Two-Dimensional Potential Method Simulations of a Body–Strake Configuration. Journal of Spacecraft and Rockets, 51 (2). pp. 468-477. ISSN 0022-4650
Turner, J. W., Popplewell, A., Patel, R., Johnson, T. R., Darnton, N. J., Richardson, S., Bredda, S. W., Tudor, R. J., Bithell, C. I., Jackson, R., Remmert, S. M., Cracknell, R. F., Fernandes, J. X., Lewis, A. G., Akehurst, S., Brace, C. J., Copeland, C., Martinez-Botas, R., Romagnoli, A. and Burluka, Alexey (2014) Ultra Boost for Economy: Extending the Limits of Extreme Engine Downsizing. SAE International Journal of Engines, 7 (1). pp. 387-417. ISSN 1946-3944
Underwood, Chris (2014) An improved lumped parameter method for building thermal modelling. Energy and Buildings, 79. pp. 191-201. ISSN 0378-7788
Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Maheri, Alireza and Lee, Jaehong (2014) Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory. Engineering Structures, 64. 12 - 22. ISSN 0141-0296
Walker, Sara, Hope, Alex and Bentley, Edward (2014) Modelling steady state performance of a local electricity distribution system under UK 2050 carbon pathway scenarios. Energy, 78. pp. 604-621. ISSN 0360-5442
Walker, Sara and Lehane, Colin (2014) Schools Behaving Badly. CIBSE Journal, 63. p. 8. ISSN 1759-846X
Walker, Sara, Theobald, Kate and Lowery, David (2014) Low-carbon retrofits in social housing: interaction with occupant behaviour. Energy Research and Social Science, 2. pp. 102-114. ISSN 2214-6296
Wang, Chao, Chang, Shinan, Wu, Hongwei and Xu, J. (2014) Modeling of Drop Breakup in the Bag Breakup Regime. Applied Physics Letters, 104 (15). p. 154107. ISSN 0003-6951
Warren, Craig (2014) MATLAB for Engineers: Development of an Online, Interactive, Self-study Course. Engineering Education, 9 (1). pp. 86-93. ISSN 1750-0052
Wiratama, I. Kade and Maheri, Alireza (2014) Optimal design of wind turbine blades equipped with flaps. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1511-1515. ISSN 1819-6608
Xie, Liyao, Xie, Yongqi, Wu, Hongwei and Yu, Jianzu (2014) High Gravity Influence on Boiling Heat Transfer in Helical Coils. International Journal of Heat and Mass Transfer, 73. pp. 706-715. ISSN 0017-9310
Xing, Lei, Liu, Xiaoteng, Alaje, Taiwo, Kumar, Ravi, Mamlouk, Mohamed and Scott, Keith (2014) A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane (PEM) fuel cell. Energy, 73. pp. 618-634. ISSN 0360-5442
Xu, Ben, Chen, Dayong and Hayward, Ryan (2014) Mechanically gated electrical switches by creasing of patterned metal/elastomer bilayer films. Advanced Materials. ISSN 1521-4095
Book Section
Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) Material and facility layout planning in construction projects using simulation. In: Proceedings of the 2014 Winter Simulation Conference, WSC 2014: December 7-10, 2014, Savannah, Georgia, USA. IEEE, Piscataway, NJ, pp. 3388-3398. ISBN 9781479974863, 9781479974849
Ali, Abdalla, Hackney, Philip, Bell, David and Birkett, Martin (2014) Dynamic job shop scheduling with alternative routes based on genetic algorithm. In: Engineering Optimization. CRC Press (Taylor & Francis Group), Boca Raton, FL, pp. 827-832. ISBN 978-1-138-02725-1
Capper, Graham, Gledson, Barry, Humphrey, Richard, Johansen, Eric, Jowsey, Ernie, Kirk, Mark, Maudsley, Cara and Weirs, John (2014) Construction. In: Real Estate Concepts: A handbook. Routledge, London. ISBN 9780415857413, 9780415857413, 9780203797648
Emhemad, Haitam, Agnew, Brian and Greenwood, David (2014) Innovative approaches to the procurement of public transport infrastructure: Evidence from recent cases. In: Proceedings of the Second International Conference on Traffic and Transport Engineering. Scientific Research Center, pp. 549-555. ISBN 978-8691615321
Fargani, Haitem, Cheung, Wai Ming, Hasan, Reaz and Birkett, Martin (2014) An integrated approach incorporating lean six sigma and life cycle assessment to support sustainable manufuacturing. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 227-231. ISBN 978-0-9926958-4-2
Foster-Smith, Lydia, Walsh, Sinead, Crapper, Martin and Sherratt, Fred (2014) Safety and volunteer construction workers. In: Proceedings 30th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-0-9552390-8-3
Ibude, Ikechukwu, Hasan, Reaz, Fargani, Haitem, Ozoemena, Matthew and Cheung, Wai Ming (2014) Sustainability analysis of Palm oil vs. Jatropha. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 265-270. ISBN 978-0-9926958-4-2
Khaled, Mahmoud, Ramadan, Mohamad, Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2014) The underhood aerothermal management of leakage zones: temperature measurements. In: Advanced Computational Methods and Experiments in Heat Transfer XIII. WIT Press, pp. 303-311.
Lim, Michael (2014) The rock coast of the British Isles: cliffs. In: Rock Coast Geomorphology: A Global Synthesis. Geological Society of London. ISBN 978-1-86239-684-5
Maheri, Alireza (2014) Atypical design optimisation of structures: case studies. In: High Performance and Optimum Design of Structures and Materials. WIT Transactions on The Built Environment, 137 . WIT Press, WIT Transactions on The Built Environment, pp. 419-430. ISBN 978-1845647742
Mendes, Joao and Buzzi, Olivier (2014) Performance of the University of Newcastle high capacity tensiometers. In: Unsaturated Soils: Research and Applications - Proceedings of the 6th International Conference on Unsaturated Soils, UNSAT 2014. Taylor & Francis, pp. 1611-1616. ISBN 9781138001503
Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2014) A new trimming approach for shunt resistors used in metering applications. In: Proceedings of the 2nd International Conference on Electronic Design (ICED), 2014. IEEE, Piscataway, NJ, pp. 94-99.
Myagkov, L. L., Mahkamov, Khamid, Chainov, N. D. and Makhkamova, Irina (2014) Advanced and conventional internal combustion engine materials. In: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. Elsevier, 370-408e. ISBN 9780857095220
Qian, Zi, Agnew, Brian and Thompson, Emine Mine (2014) Simulation of Air flow, Smoke Dispersion and Evacuation of the Monument Metro Station based on Subway Climatology. In: Fusion - Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe (eCAADe): 10-12 September 2014 Newcastle upon Tyne, England. Northumbria University, Newcastle upon Tyne, pp. 119-128. ISBN 9789491207075
Ramadan, Ahmed, Hasan, Reaz and Tudor, Jenna (2014) Simulation of flow and heat transfer of humid air in spent fuel cooling ponds. In: Lecture Notes in Engineering and Science. Newswood Limited, London, pp. 1508-1512. ISBN 9789881925350
RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) An integrated simulation model for site layout planning of tunnelling projects. In: 13th International Conference on Modeling and Applied Simulation (MAS 2014): Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2014) ; Bordeaux, France, 10 – 12 September 2014. Curran, Red Hook, NY, pp. 46-53. ISBN 9788897999348
RazaviAlavi, SeyedReza, AbouRizk, Simaan and Alanjari, Pejman (2014) Estimating the size of temporary facilities in construction site layout planning using simulation. In: Construction Research Congress 2014: Construction in a Global Network - Proceedings of the 2014 Construction Research Congress, May 19–21, 2014 Atlanta, Georgia, USA. American Society of Civil Engineers (ASCE), Reston, Virginia, United States, pp. 70-79. ISBN 9780784413517
Conference or Workshop Item
Abrishami, Sepehr, Goulding, Jack, Rahimian, Farzad Pour and Ganah, Abdulkadir (2014) G-BIM framework: a feasibility study for the adoption of generative BIM workspace for conceptual design automation. In: CCC 2014 - Creative Construction Conference 2014, 21st - 24th June 2014, Prague, Czech Republic.
Amedu, Osaighe Kennedy, Penlington, Roger, Busawon, Krishna and Morgan, Andy (2014) A novel modeling approach to the mixing process in twin-screw extruders. In: 29th International Conference of the Polymer-Processing-Society (PPS), 15th - 19th July 2013, Nuremberg.
Bell, David (2014) International student success – do the raw materials meet the specification? In: 7th Annual NE Universities (3 Rivers Consortium) Regional Learning and Teaching Conference 2014, 27th March 2014, Durham University. (Unpublished)
Benghi, Claudio and Willliamson, L. (2014) Value optimisation in construction, from Building Information Models to Big Data. In: IX International Cost Engineering Council 2014 World Congress, 20-22 October 2014, Milan.
Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Ageing problems of GFRP grids used for masonry reinforcement. In: MURICO 2014, 9 - 11 September 2014, Ravenna, Italy.
Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Reinforcement of masonry panels with GFRP grids. In: 9th International Conference on Structural Analysis of Historical Constructions, 14 - 17 October 2014, Mexico City.
Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2014) Durability analysis for FRP and SRG composites in civil applications. In: MURICO 2014, 9 - 11 September 2014, Ravenna, Italy.
Castori, Giulio, Borri, Antonio, Osofero, Israel and Corradi, Marco (2014) Reinforcement of brick tile vaults with GFRP grids. In: 7th International Conference on FRP Composites in Civil Engineering (CICE 2014), 20 - 22 August 2014, Vancouver.
Castori, Giulio, Corradi, Marco, Borri, Antonio and Sisti, Romina (2014) Strengthening of historic masonry walls using GFRP grids embedded into inorganic matrices. In: 9th International Masonry Conference, 7 - 9 July 2014, Guimarães, Portugal.
Cheung, Wai Ming, Pachisia, Vedant and Hasan, Reaz (2014) Facilitating Waste Paper Recycling and Remanufacturing via a Cost Modelling Approach. In: International Conference on Sustainable Design and Manufacturing, 28-30 April 2014, Cardiff University.
Connor, Chris and Beckwith, Mark (2014) Product Design Education: Different Perspectives. In: 16th International Conference on Engineering and Product Design Education, 4th - 5th September 2014, Enschede, The Netherlands.
Corradi, Marco, Castori, Giulio and Borri, Antonio (2014) A new method for strengthening tiled vaults: “Reinforced Catalan vaulting”. In: 9th International Masonry Conference, 7 - 9 July 2014, Guimarães, Portugal.
Coventry, Kathryn, Richardson, Alan and Baines, Chris (2014) The effects of various mould release technologies on concrete surface finish. In: XIII International Conference on durability of building materials and composites, 2-5 Sep 2014, Sao Paulo, Brazil.
Elkady, Mustafa and Elmarakbi, Ahmed (2014) Enhancement of Occupant Safety During Frontal Collisions Using New Vehicle/Occupant Interaction Modelling With VDC Systems and Smart Structures. In: IMECE 2014 - International Mechanical Engineering Congress and Exposition, 14th - 20th November 2014, Montreal, Canada.
Elkady, Mustafa, Elmarakbi, Ahmed and Macintyre, John (2014) Improvement of vehicle safety by using vehicle dynamics control systems alongside an extendable bumper: A new mathematical methodology. In: 35th FISITA World Automotive Congress, 2014, 2nd - 6th June 2014, Maastricht, Netherlands.
Etaig, Saleh, Hasan, Reaz and Perera, Noel (2014) Investigation of enhancement of heat transfer in natural convection utilizing of nanofluids. In: XIII International Conference on Heat Transfer Applications, 19-20 January, 2015, London.
Gillie, Martin, Stratford, Tim, Crapper, Martin and Furber, Alison (2014) Teaching Skills for Conceptual Design - A New Approach. In: 5th International Symposium for Engineering Education (ISEE) 2014, 11-12 September 2014, Manchester.
Gledson, Barry and Greenwood, David (2014) The implementation and use of 4D BIM and Virtual Construction. In: Proceedings of the 30th Annual ARCOM Conference, 1-3 September 2014, Portsmouth, UK.
Gonzalez Sanchez, Sergio (2014) Effect of thermally-induced surface oxidation on the mechanical properties and corrosion resistance of Zr60Cu25Al10Fe5 bulk metallic glass. In: European Oxide Scale Conference 2014 (OXI 2014), 12-13 February 2014, London.
Hayward, Ryan, Chen, Dayong and Xu, Ben (2014) Creasing of Multilayer Polymer Films. In: MRS Spring 2014, 21-25 April 2014, San Francisco, CA, USA.
Inam, Fawad (2014) Carbon nanotechnology for future aerospace. In: International Conference on Nanomaterials and Nanotechnology 2014 (ICNN-2014), 7-9 April 2014, Karachi, Pakistan.
Inam, Fawad (2014) Structural health assessing capabilities in polymeric and ceramic nanocomposites filled with carbon nanofillers. In: International Conference on Structural Nano Composites (NANOSTRUC 2014), 20-21 May, 2014, Madrid, Spain.
Khosrowshahi, Farzad, Wishardth, Michelle, Gorse, Chris, Ghodous, Parisa, Greenwood, David and A-Shihabi, Talal (2014) Executive management decision support tool - a hybrid visual model. In: 18th International Conference on Information Visualisation, 15-18 July 2014, Paris.
Kolo, Shaba James, Rahimian, Farzad Pour and Goulding, Jack (2014) Housing delivery in Nigeria and the opportunity for offsite manufacturing. In: CCC 2014 - Creative Construction Conference 2014, 21st - 24th June 2014, Prague, Czech Republic.
Kuleshov, Andrei, Mahkamov, Khamid, Kozlov, Andrey and Fadeev, Yury (2014) Simulation of Dual-Fuel Diesel Combustion With Multi-Zone Fuel Spray Combustion Model. In: ASME 2014 Internal Combustion Engine Division Fall Technical Conference, 19-22 October 2014, Columbus, Indiana.
Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) A simple method to determine the optimal location of active flow controllers on wind turbine blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.
Maheri, Alireza, Osofero, Israel and Corradi, Marco (2014) The Effect of Column Length and Size on the Maximum Achievable Load Carrying Capacity of Prestressed Stayed Columns. In: CST2014 The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.
Omoware, Wisdom, Maheri, Alireza and Azimov, Ulugbek (2014) Aerodynamic analysis of flapping-pitching flat plates. In: 3rd International Symposium on Environmental Friendly Energies and Applications (EFEA), 19-21 November 2014, Paris.
Opoku, Alex, Udeaja, Chika and Samwinga, Victor (2014) Sustainable Urban Retrofit and Technologies. In: Doctoral Workshop: Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.
Oppon, Charles, Hackney, Philip, Shyha, Islam and Beeby, James (2014) Advances in Additive Manufacturing Processes. In: 3rd Applied Research Conference in Africa, 7 - 9 August 2014, Accra, Ghana.
Oriaifo, Emmanuel, Perera, Noel, Guy, Alan, Leung, Pak Sing and Tan, Kian (2014) A review of test protocols for assessing coating performance of water ballast tank coatings. In: The ICMNE 2014: XII International Conference on Marine and Naval Engineering, 29th - 30th September 2014, Istanbul, Turkey.
Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.
Richardson, Alan, Coventry, Kathryn and Scott, Andrew (2014) Bacterial Concrete: A biological approach to reduced permeability. In: XIII International Conference on durability of building materials and composites, 2 - 5 September, Sao Paulo, Brazil.
Sawhney, Anil, Mukherjee, Kamal K., Rahimian, Farzad Pour and Goulding, Jack (2014) Enhanced use of ICT by SMEs in construction: a scenario thinking approach. In: CCC 2014 - Creative Construction Conference 2014, 21st - 24th June 2014, Prague, Czech Republic.
Shyha, Islam and Patrick, Munachi (2014) Machinability analysis when drilling Kovar shape memory alloys. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.
Shyha, Islam and Rudd, Mark (2014) Electro-Discharge Machining of Metal Matrix Composite Materials. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.
Somoza, Maria Hernandez, Macquart, Terence and Maheri, Alireza (2014) Reduction of tidal turbines hydrodynamic loads employing bend-twist adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.
Stapelton, Kieran, Gledson, Barry and Alwan, Zaid (2014) Understanding technological interoperability through observations of data leakage in Building Information Modelling (BIM) based transactions. In: Proceedings of the 32nd eCAADe Conference, 10-12 September 2014, Northumbria University, Newcastle Upon Tyne.
Stylianidis, Nearchos, Macquart, Terence and Maheri, Alireza (2014) Aerodynamic design of wind turbine blades considering manufacturing constraints. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.
Tiwary, Abhishek (2014) Evaluation of the environmental burdens from application of digestate to urban soils: assessment and mitigation of gaseous emissions. In: Urban Environmental Pollution, 12-15 June 2014, Toronto.
Tudor, Jenna, Hooper, Helen, Penlington, Roger and Manns, Helen (2014) Who has heard about the HEAR?: Evaluation of initial employer impact of the higher education achievement record. In: SEFI 2014: 42nd Annual Conference, 15/8/14 - 19/9/14, Birmingham, United Kingdom.
Walker, Sara and Keirstead, James (2014) Localised impacts of national low carbon energy scenarios. In: Energy Systems Conference: When Theory Meets Reality, 24-25 June 2014, Queen Elizabeth II Conference Centre, London.
Wang, Anliang, Liu, L., Zhao, J., Lei, J., Zhang, L. and Wu, Hongwei (2014) Thermal control system design for high power electronic equipment of satellite during ground tests. In: IHTS140336, International Heat Transfer Symposium 2014, 6-9 May 2014, Beijing, China.
Warren, Craig, Chiwaridzo, Ngoni and Giannopoulos, Antonios (2014) Radiation characteristics of a high-frequency antenna in different dielectric environments. In: GPR2014 - 15th International Conference on Ground Penetrating Radar, 30th June - 4th July 2014, Brussels, Belgium.
Xu, Ben (2014) 'Instabilities on soft active surface - road to application'. In: 7th International Conference on Technical Advances of Thin Films and Surface Coatings - THINFILMS 2014, 14-18 July 2014, Chongquing China.
Xu, Ben (2014) Instability on the elastic solid, mechanics and engineering. In: COST Joint Training School: Particles at Liquid Interfaces - Fundamentals and Applications, 2-5 April 2014, Bonassola, Italy.
Xu, Ben (2014) Surface instabilities based smart structure/device. In: International Conference on Experimental Mechanics (ICEM 16) 2014, 7-11 July 2014, Cambridge, UK.
Zhang, Hui and Maheri, Alireza (2014) A software tool for optimising structural and material configurations of wind turbine adaptive blades. In: 3rd International Symposium On Environment Friendly Energies And Applications (EFEA 2014), 19-21 Nov 2014, Paris.
Book
Jowsey, Ernie (2014) Real Estate Concepts: A Handbook. Routledge, London. ISBN 9780415857420, 9780415857413
Penlington, Roger and Steiner, Simon (2014) An Introduction to Sustainable Development in the Engineering Curriculum. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK. ISBN 978-1-904804-22-8
Thesis
Al-Maghalseh, Maher (2014) Compact solar thermal energy storage systems using phase change materials. Doctoral thesis, Northumbria University.
Macquart, Terence (2014) Aeroelastic Analysis of Wind Turbine Smart Blades Utilising Multiple Control Surfaces. Doctoral thesis, Northumbria University.
Moradinegade Dizqah, Arash (2014) Non-linear model predictive energy management strategies for stand-alone DC microgrids. Doctoral thesis, Northumbria University.
Pearson, John (2014) Effective employer engagement in full time construction-related foundation degrees, with particular emphasis on workplace learning. Doctoral thesis, University of Northumbria.
Other
Penlington, Roger and Steiner, Simon (2014) Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK.