Web crippling behaviour and design of cold-formed steel sections

Janarthanan, B., Sundararajah, Lavan, Mahendran, Mahen, Poologanathan, Keerthan and Gunalan, Shanmuganathan (2019) Web crippling behaviour and design of cold-formed steel sections. Thin-Walled Structures, 140. pp. 387-403. ISSN 0263-8231

Full text not available from this repository.

Abstract

Cold-formed steel sections are used in many different shapes based on their applications. Recently, a new C-section known as SupaCee was introduced in Australia with higher flexural capacities compared to traditional channel sections. However, all cold-formed steel sections are vulnerable to web crippling failures due to their higher plate slenderness. Australian/New Zealand (AS/NZS 4600) and North American (AISI S100) Standards use a unified web crippling design equation with four coefficients while Eurocode 3 Part 1.3 uses different design equations to predict the web crippling capacities of cold-formed steel sections. The web crippling coefficients were developed based on the experimental studies undertaken since the 1940s. These experimental studies utilised different test set-ups and specimens lengths and hence the accuracy of predictions using these coefficients may be inadequate. No coefficients are available for unlipped channel sections with fastened supports and high strength SupaCee sections while the same coefficients are used for lipped channels with fastened and unfastened supports. To address these shortcomings, the web crippling behaviour of unlipped and lipped channel and SupaCee sections was experimentally investigated based on recently developed AISI S909 web crippling test guidelines. Finite element analyses were then performed to extend the range of cold-formed steel sections. Using the web crippling capacity results from both experiments and finite element analyses, new equations were proposed to determine the web crippling capacities of lipped and unlipped channel and SupaCee sections. Suitable direct strength method based web crippling design equations were also developed. This paper presents the important details of several detailed web crippling studies undertaken recently including a suite of web crippling design equations that can be adopted in relevant cold-formed steel standards.

Item Type:	Article
Uncontrolled Keywords:	Cold-formed steel beams, Web crippling, Lipped and unlipped channel sections, Experiments, Finite element analyses, ETF, ITF, EOF and IOF load cases, Design rules, Direct strength method
Subjects:	H300 Mechanical Engineering
Department:	Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User:	Paul Burns
Date Deposited:	18 Sep 2019 15:05
Last Modified:	10 Oct 2019 15:04
URI:	http://nrl.northumbria.ac.uk/id/eprint/40731

Downloads