Wear rate at RT and 100 °C and operating temperature range of microalloyed Cu50Zr50 shape memory alloy

Younes, Abdurauf, Nnamchi, Paul, Medina, J., Pérez, P., Villapún, Victor M., Badimuro, F., Kamnis, S., Jimenez-Melero, E. and Gonzalez Sanchez, Sergio (2020) Wear rate at RT and 100 °C and operating temperature range of microalloyed Cu50Zr50 shape memory alloy. Journal of Alloys and Compounds, 817. p. 153330. ISSN 0925-8388

1-s2.0-S0925838819345761-main.pdf - Accepted Version
Available under License Creative Commons Attribution Non-commercial No Derivatives 4.0.

Download (1MB) | Preview
Official URL: https://doi.org/10.1016/j.jallcom.2019.153330


The effect of microalloying with Co on the wear rate and on the operating temperature range of Cu50Zr50 shape memory alloy against 304 stainless steel counterface has been investigated by studying the mass loss and wear behaviour of Cu50Zr50, Cu49.5Zr50Co0.5 and Cu49Zr50Co1 at. % at room temperature (RT) and 100 °C. For the alloys tested at 15 N, maximum wear resistance is achieved at RT for the alloy with 0.5 at. % Co compared to the parent Cu50Zr50 at. % alloy. This is mostly attributed to the effect of Co in promoting stress-induced martensitic transformation (i.e., work-hardening). For wear tests at 100 °C (100 °C plus friction temperature for 1 h), the mass loss is higher than that at RT since martensite partly reverts into soft austenite through an isothermal process. In addition, the alloys are more prone to oxidation with formation of thick oxide layers that can easily get fragmented and detached from the surface thus resulting is higher mass loss than at RT. The effect of Co in promoting martensitic transformation is negligible when testing at 100 °C, since the stress-induced martensite partly reverts into austenite and the thick oxide layer formed on the surface not only masks the effect of the underlaying substrate for it can also easily detach upon wear.

Item Type: Article
Uncontrolled Keywords: Metals and alloys, Quenching, Shape memory, Mechanical properties
Subjects: H300 Mechanical Engineering
H800 Chemical, Process and Energy Engineering
Department: Faculties > Engineering and Environment > Mechanical and Construction Engineering
Depositing User: Elena Carlaw
Date Deposited: 18 Dec 2019 17:09
Last Modified: 31 Jul 2021 14:04
URI: http://nrl.northumbria.ac.uk/id/eprint/41758

Actions (login required)

View Item View Item


Downloads per month over past year

View more statistics