Items where Author is "Hackney, Philip"

Rajanayagam, Heshachanaa, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Varelis, George E., Sherlock, Paul, Nagaratnam, Brabha and Hackney, Philip (2021) A-State-Of-The-Art review on modular building connections. Structures, 34. pp. 1903-1922. ISSN 2352-0124

Hackney, Philip, Foster, Laurence, Viney, Adam and Kelly, Kenneth (2021) Building additive manufacturing - a materials evaluation. International Journal of Rapid Manufacturing, 10 (1). pp. 69-79. ISSN 1757-8817

Suntharalingam, Thadshajini, Poologanathan, Keerthan, Nagaratnam, Brabha, Hackney, Philip and Ramli, Jeffri (2021) Effect of Polypropylene fibres on the Workability parameters of Extrudable Cementitious Material. In: ICSECM 2019: Proceedings of the 10th International Conference on Structural Engineering and Construction Management. Lecture Notes in Civil Engineering, 94 (94). Springer, Singapore, pp. 427-435. ISBN 9789811572210, 9789811572227

Suntharalingam, Thadshajini, Nagaratnam, Brabha, Poologanathan, Keerthan, Hackney, Philip and Ramli, Jeffri (2020) Effect of polypropylene fibres on the workability parameters of extrudable cementitious materials. In: Second RILEM International Conference on Concrete and Digital Fabrication: DC 2020. RILEM Bookseries (28). Springer, Cham, pp. 516-526. ISBN 9783030499150, 9783030499167

Hackney, Philip and Oppon, Charles (2020) Fatigue Analysis of Additive Manufactured Long Fibre Reinforced Nylon Materials. Procedia CIRP, 51. pp. 678-683. ISSN 2212-8271

Suntharalingam, Thadshajini, Nagaratnam, Brabha, Poologanathan, Keerthan, Hackney, Philip and Ramli, Jeffri (2019) Evolution of additive manufacturing technology in construction industry & challenges on implementation: a review. In: 10th International Conference on Structural Engineering and Construction Management, 12th - 14th December 2019, Kandy, Sri Lanka. (Unpublished)

Ozoemena, Chukwunonso Emmanuel, Hackney, Philip, Birkett, Martin and Bell, David (2019) An experimental strategy for fractionating 33 and 34 factorial experiments. International Journal for Quality Research, 13 (3). pp. 505-520. ISSN 1800-6450

Kelly, Kenneth, Forster, Laurence, Hackney, Philip, Richardson, Alan and Viney, Adam (2019) Building Additive Manufacturing – A Materials Evaluation. In: 16th Conference on Rapid Design, Prototyping & Manufacturing, 4-5 Apr 2019, Uxbridge, UK.

Yang, Longzhi, Li, Jie, Chao, Fei, Hackney, Philip and Flanagan, Mark (2018) Job Shop Planning and Scheduling for Manufacturers with Manual Operations. Expert Systems. ISSN 1468-0394

Yang, Longzhi, Li, Jie, Hackney, Philip, Chao, Fei and Flanagan, Mark (2018) Manual Task Completion Time Estimation for Job Shop Scheduling Using a Fuzzy Inference System. In: iThings - 2017 IEEE International Conference on Internet of Things, 21st - 23rd June 2017, Exeter, UK.

Hackney, Philip, Wooldridge, Richard and Connor, Chris (2017) Optimisation of Additive Manufactured Sand Printed Mould Material for Aluminium Castings. Procedia Manufacturing, 11. pp. 457-465. ISSN 2351-9789

Yang, Longzhi, Li, Jie, Hackney, Philip, Chao, Fei and Flanagan, Mark (2017) Manual Collate and Pack Area Completion Time Estimation for POS and POP Manufacturing Scheduling. In: IEEE CPSCom-2017 - 10th IEEE International Conference on Cyber, Physical and Social Computing, 21st - 23rd June 2017, Bradford, UK.

Hackney, Philip and Wooldridge, Richard (2017) 3D Sand Printing for Automotive Mass Production Applications. International Journal of Rapid Manufacturing, 6 (3). pp. 134-154. ISSN 1757-8817

Naylor, Andrew, Huo, Dehong, Hackney, Philip and Perera, Noel (2017) Operational performance of individual handsaw teeth. In: 23rd International Wood Machining Seminar, 28th-31st May 2017, Warsaw, Poland.

Oppon, Charles and Hackney, Philip (2017) Building of Polyurethane Foams Structures Using Additive Manufacturing Technology. In: RDPM 2017 - Rapid Design, Prototyping and Manufacturing Conference, 27th -28th April 2017, Newcastle, UK.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2017) Process Optimisation for Internal Cylindrical Rough Turning of Nickel Alloy 625 Weld Overlay. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 11 (4).

Hackney, Philip and Wooldridge, Richard (2017) Characterisation of direct 3D sand printing process for the production of sand cast mould tools. Rapid Prototyping Journal, 23 (1). pp. 7-15. ISSN 1355-2546

Ali, Abdalla, Birkett, Martin, Hackney, Philip and Bell, David (2016) Efficient nondominated sorting with genetic algorithm for solving multi-objective job shop scheduling problems. In: 2016 International Conference Multidisciplinary Engineering Design Optimization (MEDO). IEEE, Piscataway. ISBN 978-1-5090-2113-0

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2016) Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of varying mixing ratios and foaming direction on polyurethane foam for additive manufacturing applications. In: Proceedings of the 14th Conference on Rapid Design, Prototyping and Manufacturing (RDPM) 2015. Lancaster University, Lancaster, pp. 69-77. ISBN 9781526203038

Ali, Abdalla, Hackney, Philip, Bell, David and Birkett, Martin (2015) Genetic algorithms for solving bicriteria dynamic job shop scheduling problems with alternative routes. In: ICEMIS '15 Proceedings of The International Conference on Engineering & MIS 2015. Association for Computing Machinery, New York. ISBN 978-1-4503-3418-1

Ali, Abdalla, Hackney, Philip, Birkett, Martin and Bell, David (2015) Genetic algorithms for minimizing the number of tardy jobs in job shop scheduling with machine setup issue. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). University of Bath, UK, pp. 63-69. ISBN 1857901878

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Procedia Engineering, 132. pp. 701-708. ISSN 1877-7058

Bade, Lokesh, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Procedia Engineering, 132. pp. 86-93. ISSN 1877-7058

Ali, Abdalla, Hackney, Philip, Bell, David and Birkett, Martin (2014) Dynamic job shop scheduling with alternative routes based on genetic algorithm. In: Engineering Optimization. CRC Press (Taylor & Francis Group), Boca Raton, FL, pp. 827-832. ISBN 978-1-138-02725-1

Oppon, Charles, Hackney, Philip, Shyha, Islam and Beeby, James (2014) Advances in Additive Manufacturing Processes. In: 3rd Applied Research Conference in Africa, 7 - 9 August 2014, Accra, Ghana.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2013) A Review of Life Cycle Assessment of Renewable Energy Systems. In: 11th International Conference on Manufacturing Research, 19 - 20 September 2013, Cranfield University.

Naylor, Andrew and Hackney, Philip (2013) A review of wood machining literature with a special focus on sawing. BioResources, 8 (5). pp. 3122-3135. ISSN 1930-2126

Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Determination of wood strength properties through standard test procedures. In: ICMR 2012: 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Naylor, Andrew, Hackney, Philip and Perera, Noel (2012) Evaluation of handsaw tooth performance through the development of a controlled cutting test rig. In: ICMR 2012: International Conference on Manufacturing Research 2012, 11-13 September 2012, Aston University, Birmingham, UK.

Naylor, Andrew, Hackney, Philip, Clahr, Emil and Perera, Noel (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. BioResources, 7 (3). pp. 2883-2894. ISSN 1930-2126

Naylor, Andrew, Hackney, Philip, Perera, Noel and Clahr, Emil (2012) A predictive model for the cutting force in wood machining developed using mechanical properties. Bioresources.com, 7 (3). pp. 2883-2894. ISSN 1930-2126

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) Effect of laminate configuration and shell-thickness variation on the inducted twist distribution in wind turbine adaptive blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for deformation analysis of wind turbine adaptive blades. In: High Performance Structure and Materials VI. WIT transactions on the built environment, 124 . WIT Press, Southampton, UK, pp. 13-26. ISBN 978-1845645960

Zhang, Hui, Daadbin, Ali, Meheri, Alireza and Hackney, Philip (2012) An analytical model for frequency analysis of composite wind turbine adaptive blades. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 406-411. ISBN 978-1467329095

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for frequency analysis of composite wind turbine blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Hackney, Philip and Ainsley, Christopher (2011) Rapid manufacturing- state of the art, analysis and future perspectives. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Hackney, Philip and Curry, Paul (2011) A case study of the benefits and conflicts of knowledge between industry, academia and government. In: ICAM 2011: International Conference on Advanced Manufacturing, 2011, 23-24 May 2011, Terrenganu, Malaysia.

Naylor, Andrew, Hackney, Philip and Clahr, Emil (2011) Machining of wood using a Rip Tooth: effects of work-piece variations on cutting mechanics. In: 20th International Wood Machining seminar, 7-10 June 2011, Skellefteå , Sweden.

Hackney, Philip (2007) An investigation into the characteristics of materials and processes, for the production of accurate direct parts and tools using 3D rapid prototyping technologies. Doctoral thesis, Northumbria University.

Davidson, Adam and Hackney, Philip (2006) Introduction of CAD/CAM Technology into MKW Engineering. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2006) Product Enhancement with a systems approach, utilising Time Compression Technologies. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip and Sarwar, Mohammed (2006) Rapid Manufacturing of Polymer Injection Mould Tool Inserts for Prototype Tooling Production. In: 16th International Conference on Flexible Automation and Intelligent Manufacturing : FAIM 2006, 26-28 June 2006, Limerick.

Hackney, Philip (2006) Analysis of the application of the "digital light" rapid prototyping processing for functional rapid manufactured components. In: 7th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 22 June 2006, High Wycombe.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Implementing Time Compression Technologies to Assist Small to Medium Size Enterprises for Product Development. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Hackney, Philip, Sarwar, Mohammed and van Bedaf, Jason (2005) Reverse Engineering – Speeds up manufacture of thermoforming tools. In: 15th International Conference on Flexible Automation and Intelligent Manufacturing, 18-20 July 2005, Bilbao.

Hackney, Philip, Chinnaswamy, G. K. and Arulraj, A. C. (2005) Development of a Build Monitoring System for the EnvisionTec PerFactory Rapid Prototyping Process. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip, Chinnaswamy, G. K., Arulraj, A. C. and Nair, B. T. (2005) Investigation into Surface Finish of Parts Built by the EnvisionTec PerFactory Rapid Prototyping Process. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip, Arulraj, A. C. and Chinnaswamy, G. K. (2005) Investigation into the EnvisionTec PerFactory® Rapid Prototyping Process for Production of Accurate and Strong Functional Parts. In: 6th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 15th June 2005, High Wycombe.

Hackney, Philip (2004) The Application of the Z-Corps 3D-Printing System for the Manufacture of Rapid Tooling inserts, for the Production Polymer Injection Moulded Parts. In: Time Compression Technologies Conference, 15th September 2004, Birmingham.

Danaher, Sean, Datta, Psantu, Hackney, Philip and Waddle, I. (2004) Erosion modelling using Bayesian regulated artificial neural networks. Wear, 256 (9-10). pp. 879-888. ISSN 0043-1648

Hackney, Philip and Pancholi, Ketan (2004) Analysis of the EnvisionTec PerFactory system for rapid production of components and validation utilizing finite element and photo-elastic analysis. In: 5th National Conference on Rapid Design, Prototyping and Manufacture, 2004, High Wycombe, UK.

Hackney, Philip and Pancholi, Ketan (2004) Analysis of the application of the Z-Corps three-dimensional printing system for rapid tooling for plastic injection moulded components. In: Fifth National Conference on Rapid Design, Prototyping, and Manufacturing. Wiley-Blackwell, Oxford, pp. 3-11. ISBN 978-1860584657

Hackney, Philip and Pancholi, Ketan (2004) Application of the Z-Corps three-dimensional printing processes using novel material to manufacture bio-scaffold for bone replacement. In: Fifth National Conference on Rapid Design, Prototyping, and Manufacturing. Wiley-Blackwell, Oxford, pp. 53-60. ISBN 978-1860584657

Hackney, Philip and Channappa, L. (2004) Development of systems to increase the green part strength of the three-dimensional printed Z-Corps manufactured parts by infiltration processes to improve their range of application. In: Fifth National Conference on Rapid Design, Prototyping and Manufacture. Wiley-Blackwell, Oxford, pp. 87-92. ISBN 978-1860584657

Hackney, Philip and Sarwar, Mohammed (2003) An Evaluation of Rapid Prototyping “Concept Modelling” Techniques for New Product Development. In: 13th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM2003), 18th June 2003, Tampa.

Hackney, Philip (2003) A Study of Build Accuracy of the Z-Corps 3D Printing Technique and Related Seepage Control. In: 4th National Conference on Rapid Prototyping, Rapid Tooling and Rapid Manufacturing, 19th June 2003, High Wycombe.

Hackney, Philip (2001) Reverse Engineering: A Simple Concept, A Complex Process. In: Time Compression Technologies Conference, 17th October 2001, Manchester.

Hackney, Philip (2001) Operating Characteristics of the Z-Corps 3D Printing Process. In: Conference on Materials Research, 20th September 2001, Cardiff.

Hackney, Philip and Sarwar, Mohammed (2001) The Revolution of Mid-Range Low Cost 3D Solid Modellers to Small Engineering Companies within the UK. In: 11th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 16-18 July 2001, Dublin.

Hackney, Philip and Sarwar, Mohammed (1997) Getting started in Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip, Sarwar, Mohammed and Widdows, Stephen (1997) Spin casting of metal parts directly from RP masters. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.

Hackney, Philip and Sarwar, Mohammed (1997) Thermal and Mechanical Characteristics of the Laminated Object Manufacturing Process used for Rapid Prototyping. In: 7th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), 25-27 June 1997, Middlesbrough.