Items where Author is "Shyha, Islam"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 72.

Elnabawy, Eman, Farag, Mazen, Soliman, Amira, Mahmoud, Kamal, Shehata, Nader, Nair, Remya, Kandas, Ishac, Rasheed, Aatif, Combrinck, Madeleine, Khaliq, Jibran, Shyha, Islam, Kilic, Ali and Hassanin, Ahmed (2021) Solution Blow Spinning of Piezoelectric Nanofiber Mat for Detecting Mechanical and Acoustic Signals. Journal of Applied Polymer Science, 138 (45). p. 51322. ISSN 0021-8995

Gariani, Salah, El-Sayed, Mahmoud Ahmed and Shyha, Islam (2021) Optimisation of cutting fluid concentration and operating parameters based on RSM for turning Ti–6Al–4V. International Journal of Advanced Manufacturing Technology, 117 (1-2). pp. 539-553. ISSN 0268-3768

Le, Bao, Kernin, Arnaud, Khaliq, Jibran, Fu, Guoyu, Huo, Dehong, Bilotti, Emiliano, Zhang, Han and Shyha, Islam (2021) Micro-End-Milling of Carbon Nanotube Reinforced Epoxy Nanocomposites Manufactured using Three Roll Mill Technique. Journal of Manufacturing Processes, 70. pp. 307-320. ISSN 1526-6125

Eltouby, Pakinam, Shyha, Islam, Li, Chunchun and Khaliq, Jibran (2021) Factors Affecting the Piezoelectric Performance of Ceramic-Polymer Composites: A Comprehensive Review. Ceramics International, 47 (13). pp. 17813-17825. ISSN 0272-8842

Rasheed, Aatif, Combrinck, Madeleine, Khaliq, Jibran, Martin, James, Hassanin, Ahmed, Shehata, Nader, Elnabawy, Eman and Shyha, Islam (2021) Study of Air Pressure and Velocity for Solution Blow Spinning of Polyvinylidene Fluoride Nanofibres. Processes, 9 (6). p. 1014. ISSN 2227-9717

Shakoori, Niusha, Fu, Guoyu, Le, Bao, Khaliq, Jibran, Jiang, Long, Huo, Dehong and Shyha, Islam (2021) An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites. International Journal of Advanced Manufacturing Technology, 113 (7). pp. 2003-2015. ISSN 0268-3768

Shyha, Islam, Huo, Dehong, Hesamikojidi, Peyman, Eldessouky, Hossam and El-Sayed, Mahmoud Ahmed (2021) Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites. International Journal of Advanced Manufacturing Technology, 112 (3-4). pp. 1101-1113. ISSN 0268-3768

Degtyareva, Natalia, Perampalam, Gatheeshgar, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Shyha, Islam and Mcintosh, Alex (2020) Local Buckling Strength and Design of Cold-Formed Steel Beams with Slotted Perforations. Thin-Walled Structures, 156. p. 106951. ISSN 0263-8231

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 1: Mechanical Properties. Journal of Manufacturing Science and Engineering, 142 (10). p. 100801. ISSN 1087-1357

Le, Bao, Khaliq, Jibran, Huo, Dehong, Teng, Xiangyu and Shyha, Islam (2020) A Review on Nanocomposites. Part 2: Micromachining. Journal of Manufacturing Science and Engineering, 142 (10). p. 100802. ISSN 1087-1357

Aatif, Rasheed, Khaliq, Jibran, Combrinck, Madeleine, Hassanin, Ahmed H., Shehata, Nader, Elnabawy, Eman and Shyha, Islam (2020) Solution Blow Spinning of Polyvinylidene Fluoride Based Fibers for Energy Harvesting Applications: A Review. Polymers, 12 (6). p. 1304. ISSN 2073-4360

Rasheed, Aatif, Combrinck, Madeleine, Khaliq, Jibran, Hassanin, Ahmed, Shehata, Nader, Elnabawy, Eman and Shyha, Islam (2020) Solution Blow Spinning of High-Performance Submicron Polyvinylidene Fluoride Fibres: Computational Fluid Mechanics Modelling and Experimental Results. Polymers, 12 (5). p. 1140. ISSN 2073-4360

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Alzahrani, Bandar (2020) Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International Journal of Advanced Manufacturing Technology, 107 (7-8). pp. 3169-3183. ISSN 0268-3768

Edmondson, Vikki, Woodward, John, Lim, Michael, Kane, Malal, Martin, James and Shyha, Islam (2019) Improved non-contact 3D field and processing techniques to achieve macrotexture characterisation of pavements. Construction and Building Materials, 227. p. 116693. ISSN 0950-0618

Rosnan, Rosmahidayu, Murad, Muhamad Nasir, Azmi, Azwan Iskandar and Shyha, Islam (2019) Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys. Tribology International, 136. pp. 58-66. ISSN 0301-679X

Fu, Guoyu, Huo, Dehong, Shyha, Islam, Pancholi, Ketan and Saharudin, Mohd Shahneel (2019) Experimental Investigation on Micro Milling of Polyester/Halloysite Nano-Clay Nanocomposites. Nanomaterials, 9 (7). p. 917. ISSN 2079-4991

El-Nakeeb, Nour, El-Sayed, Mahmoud Ahmed, Ghazy, Mootaz and Shyha, Islam (2019) Improving Quality Characteristics and Structural Integrity of Parts by SLA. Journal of Engineering Technology, 6 (1). ISSN 0747-9964

Teng, Xiangyu, Chen, Wanqun, Huo, Dehong, Shyha, Islam and Lin, Chao (2018) Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures, 203. pp. 636-647. ISSN 0263-8223

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2018) Dynamic simulation of machining composites using the explicit element-free Galerkin method. Composite Structures, 198. pp. 156-173. ISSN 0263-8223

Teng, Xiangyu, Huo, Dehong, Shyha, Islam, Chen, Wanqun and Wong, Eugene (2018) An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2127-2140. ISSN 0268-3768

Teng, Xiangyu, Huo, Dehong, Chen, Wanqung, Wong, Eugene, Zheng, Lu and Shyha, Islam (2018) Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes, 32. pp. 116-126. ISSN 1526-6125

Shyha, Islam, Gariani, Salah, El-Sayed, Mahmoud and Huo, Dehong (2018) Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V. Metals, 8 (3). p. 185. ISSN 2075-4701

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2018) Experimental Analysis of System Parameters for Minimum Cutting Fluid Consumption when Machining Ti-6Al-4V Using a Novel Supply System. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 2795-2809. ISSN 0268-3768

El-Sayed, Mahmoud Ahmed, Shyha, Islam and Basuny, Fawzia Hamed (2018) Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review. Journal of Engineering Technology, 6. pp. 225-244.

Shyha, Islam, Deary, Michael and Huo, Dehong (2018) An evaluation of dust release when machining nano-structured composite materials. In: The International Conference on Materials Science and Engineering: Recent Advances and Challenges, 11-13 March 2018, Alexandria.

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Biodegradation of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Short Term Seawater Immersion. Polymers, 9 (8). p. 314. ISSN 2073-4360

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Environmental stress cracking resistance of halloysite nanoclay-polyester nanocomposites. World Journal of Engineering and Technology, 5 (3). pp. 389-403. ISSN 2331-4249

Islam Shyha (2017) Composite machining tool. WO2017098242A1.

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Flexural Properties of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Aggressive Environment. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2017) Process Optimisation for Internal Cylindrical Rough Turning of Nickel Alloy 625 Weld Overlay. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 11 (4).

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) Meshfree formulation for modelling of orthogonal cutting of composites. Composite Structures, 166. pp. 193-201. ISSN 0263-8223

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) An Investigation into the Dependency of Cutting Forces on the Volume Fraction and Fibre Orientation during Machining Composite Materials. Materials Science Forum, 882. pp. 61-65. ISSN 1662-9752

Gariani, Salah, Shyha, Islam, Jackson, Connor and Inam, Fawad (2017) Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid. In: Manufacturing Sciences and Technologies VII. Materials Science Forum (882). Trans Tech Publications, pp. 36-40. ISBN 9783038357322

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of Nanomaterials (JNM), 2016. p. 2604631. ISSN 1687-4110

Chan, Lydia, Shyha, Islam, Dreyer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. In: 4th Asia Conference on Mechanical and Materials Engineering, 14-18 July 2016, Kuala Lumpur.

Chan, Lydia, Shyha, Islam, Dryer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. Materials Science Forum, 880. pp. 54-58. ISSN 1662-9752

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites - a review. Polymers, 8 (8). p. 281. ISSN 2073-4360

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay–polyester nanocomposites exposed to diluted methanol. Journal of Composite Materials, 51 (11). pp. 1653-1664. ISSN 1530-793X

Gariani, Salah, Shyha, Islam and Inam, Fawad (2016) Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In: ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering, 10th - 13th May 2016, Istanbul, Turkey.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2016) Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Shyha, Islam and Rudd, Mark (2016) Electro-discharge machining of metal matrix composite materials. Advances in Materials and Processing Technologies, 2 (2). pp. 235-244. ISSN 2374-068X

Allwood, Julian, Childs, Tom, Clare, Adam, De Silva, Anjali, Dhokia, Vimal, Hutchings, Ian, Leach, Richard, Leal-Ayala, David, Lowth, Stewart, Majewski, Candice, Marzano, Adelaide, Mehnen, Jörn, Nassehi, Aydin, Ozturk, Erdem, Raffles, Mark, Roy, Raj, Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay/polyester. International Journal of Advances in Science Engineering and Technology, 4 (1*). pp. 42-46. ISSN 2321-9009

Shyha, Islam, Richardson, Alan, Coventry, Kathryn and Ponton, Hazel (2016) Mould release technologies with regard to concrete surface finish. Magazine of Concrete Research, 68 (2). pp. 87-98. ISSN 0024-9831

Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Advances, 6 (41). pp. 34188-34197. ISSN 2046-2069

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of varying mixing ratios and foaming direction on polyurethane foam for additive manufacturing applications. In: Proceedings of the 14th Conference on Rapid Design, Prototyping and Manufacturing (RDPM) 2015. Lancaster University, Lancaster, pp. 69-77. ISBN 9781526203038

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2015) The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6. pp. 1076-1089. ISSN 2046-2069

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Procedia Engineering, 132. pp. 701-708. ISSN 1877-7058

Bade, Lokesh, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Procedia Engineering, 132. pp. 86-93. ISSN 1877-7058

Shyha, Islam, Gariani, Salah and Bhatti, M. (2015) Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Procedia Engineering, 132. pp. 577-584. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Procedia Engineering, 132. pp. 569-576. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Shyha, Islam and Rudd, Mark (2014) Electro-Discharge Machining of Metal Matrix Composite Materials. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.

Shyha, Islam and Patrick, Munachi (2014) Machinability analysis when drilling Kovar shape memory alloys. In: Advances in Materials and Processing Technologies (AMPT 2014), 17-20 November 2014, Dubai.

Oppon, Charles, Hackney, Philip, Shyha, Islam and Beeby, James (2014) Advances in Additive Manufacturing Processes. In: 3rd Applied Research Conference in Africa, 7 - 9 August 2014, Accra, Ghana.

Shyha, Islam, Kuo, Chun Liang and Soo, Sein Leung (2014) Workpiece surface integrity and productivity when cutting CFRP and GFRP composites using a CO2 laser. International Journal of Mechatronics and Manufacturing Systems, 7 (2/3). pp. 93-107. ISSN 1753-1039

Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. In: 5th Manufacturing Engineering Society International Conference, 26-28 June 2013, Zaragoza, Spain.

Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. Procedia Engineering, 63. pp. 931-937. ISSN 1877-7058

Soo, Sein Leung, Shyha, Islam, Barnett, Tom, Aspinwall, David and Sim, Wei-Ming (2012) Grinding performance and workpiece integrity when superabrasive edge routing carbon fibre reinforced plastic (CFRP) composites. CIRP Annals - Manufacturing Technology, 61 (1). pp. 295-298. ISSN 0007-8506

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2011) The effect of peel ply layer on hole integrity when drilling carbon fibre-reinforced plastic. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 225 (7). pp. 1217-1223. ISSN 0954-4054

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Perry, Richard, Harden, Peter and Dawson, Stuart (2011) Hole quality assessment following drilling of metallic-composite stacks. International Journal of Machine Tools and Manufacture, 51 (7-8). pp. 569-578. ISSN 0890-6955

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Dawson, Stuart and Pretorius, Cornelius (2010) Drilling of titanium/CFRP/aluminium stacks. Key Engineering Materials, 447 (624). pp. 624-633. ISSN 1013-9826

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2010) Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites. Journal of Materials Processing Technology, 210 (8). pp. 1023-1034. ISSN 0924-0136

Shyha, Islam (2010) On-going experimental work when twist drilling of CFRP and titanium/CFRP/aluminium stacks used in the aerospace industry. In: CIRP January Meeting 2010 – STC C, 20-22 January 2010, Paris, France.

Shyha, Islam, Aspinwall, David, Soo, Sein Leung and Bradley, Sam (2009) Drill geometry and operating effects when cutting small diameter holes in CFRP. International Journal of Machine Tools and Manufacture, 49 (12-13). pp. 12-13. ISSN 0890-6955

Shyha, Islam (2009) Experimental study of small hole drilling in diverse CFRP laminate configurations. In: The 9th International Conference on Production Engineering, Design and Control (PEDAC 2009), 10-12 February 2009, Alexandria, Egypt.

Shyha, Islam (2009) Small hole drilling of carbon fibre composites using diamond coated drills. In: Efficient & Low Carbon Manufacturing: proceedings of the 26th International Manufacturing Conference (IMC26). Trinity College Dublin, Dublin, Ireland, pp. 87-94. ISBN 978-0956230386

Shyha, Islam (2004) Burr Formation in Drilling of Miniature Holes in Brass. In: The 8th International Conference on Production Engineering, Design, and Control (PEDAC 2004), 27-29 December 2004, Alexandria, Egypt.

This list was generated on Tue Nov 29 03:45:34 2022 UTC.