Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2011

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | P | R | S | T | V | W | Y
Number of items: 97.

A

Ahmad, Manzoor, Luo, Jikui, Xu, Ben, Purnawali, Hendra, King, Peter, Chalker, Paul, Fu, Yong Qing, Huang, Wei Min and Miraftab, Mohsen (2011) Synthesis and characterization of polyurethane-based shape-memory polymers for tailored Tg around body temperature for medical applications. Macromolecular Chemistry and Physics, 212 (6). pp. 592-602. ISSN 1521-3935

Akter, Aysha, Pender, Garry, Wright, Grant and Crapper, Martin (2011) Predicting the hydrodynamic forces on geobag revetments. Journal of Flood Risk Management, 4 (4). pp. 328-338. ISSN 1753-318X

Alexakis, Athanasios, Gkounis, George, Mahkamov, Khamid and Davis, J. (2011) Experimental and theoretical evaluation of the performance of a Whispergen MkVb micro CHP unit in typical UK house conditions. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (3). pp. 810-817. ISSN 1650-3686

Alghane, M., Chen, Baixin, Fu, Yong Qing, Li, Yifan, Luo, Jikui and Walton, Anthony (2011) Experimental and numerical investigation of acoustic streaming excited by using a surface acoustic wave device on a 128° YX-LiNbO3 substrate. Journal of Micromechanics and Microengineering, 21 (1). 015005. ISSN 0960-1317

Alghane, M., Fu, Yong Qing, Chen, Baixin, Li, Yifan, Desmulliez, Marc and Walton, Anthony (2011) Streaming phenomena in microdroplets induced by Rayleigh surface acoustic wave. Journal of Applied Physics, 109 (11). p. 114901. ISSN 0021-8979

Aneke, Mathew, Agnew, Brian, Aliyu, Bashir, Walker, Sara and Atan, Rahim (2011) Prospects of Croton Megaloacarpus (musine) as a source of bio-diesel. In: Nigerian Alternative Energy Expo, 17 - 19 October 2011, Abuja, Nigeria.

Azimov, Ulugbek, Okuno, Masahiro, Tsuboi, Kazuya, Kawahara, Nobuyuki and Tomita, Eiji (2011) Multidimensional CFD simulation of syngas combustion in a micro-pilot-ignited dual-fuel engine using a constructed chemical kinetics mechanism. International Journal of Hydrogen Energy, 36 (21). pp. 13793-13807. ISSN 0360-3199

Azimov, Ulugbek, Tomita, Eiji, Kawahara, Nobuyuki and Harada, Yuji (2011) Effect of syngas composition on combustion and exhaust emission characteristics in a pilot-ignited dual-fuel engine operated in PREMIER combustion mode. International Journal of Hydrogen Energy, 36 (18). pp. 11985-11996. ISSN 0360-3199

B

Baila, A., Binda, Luigia, Borri, Antonio, Cangi, G., Cardani, G., Castori, Giulio, Corradi, Marco, De Maria, Alessandro, del Monte, E., Dona, Chiara, Galano, L., Giannantoni, Andrea, Ortolani, B., Pagliazzi, A., Saisi, A., Sperandio, D., Speranzini, Emanuela, Tedeschi, Cristina and Vignoli, Andrea (2011) Manuale delle murature storiche. DEI, Rome. ISBN 978-8849604030

Blacklock, Matthew and Hayhurst, D. R. (2011) Multi-Axial Failure of Ceramic Matrix Composite Fiber Tows. Journal of Applied Mechanics, 78 (3). 031017. ISSN 0021-8936

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Intrados strengthening of brick masonry arches with composite materials. Composites Part B: Engineering, 42 (5). pp. 1164-1172. ISSN 1359-8368

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Masonry Columns Confined by Steel Fiber Composite Wraps. Materials, 4 (12). pp. 311-326. ISSN 1996-1944

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Shear behavior of masonry panels strengthened by high strength steel cords. Construction and Building Materials, 25 (2). pp. 494-503. ISSN 0950-0618

Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2011) Shear behavior of unreinforced and reinforced masonry panels subjected to in situ diagonal compression tests. Construction and Building Materials, 25 (12). pp. 4403-4414. ISSN 09500618

Borri, Antonio and Corradi, Marco (2011) Strengthening of timber beams with high strength steel cords. Composites Part B: Engineering, 42 (6). pp. 1480-1491. ISSN 13598368

Brodie, D. S., Fu, Yong Qing, Li, Yifan, Alghane, M., Reuben, Robert and Walton, Anthony (2011) Shear horizontal surface acoustic wave induced microfluidic flow. Applied Physics Letters, 99 (15). p. 153704. ISSN 0003-6951

Burluka, Alexey, El-Dein Hussin, Ahmed, Sheppard, Christopher, Liu, Kexin and Sanderson, Victoria (2011) Turbulent Combustion of Hydrogen–CO Mixtures. Flow, Turbulence and Combustion, 86 (3-4). pp. 735-749. ISSN 1386-6184

Butt, Talib E., Ingles, A. J. D. and Baloch, M. I. (2011) A conceptual model outline for integrated exposure assessment of waste disposal sites. Environmental Progress and Sustainable Energy, 30 (4). pp. 696-708. ISSN 1944-7442

C

Capper, Graham, Theobald, Kate and Walker, Sara (2011) Energy demand and associated carbon emissions for Northumbria University estate: one School approach. In: RGS-IBG Annual International Conference, 31 August - 2 September 2011, London, UK.

Caron, Arnaud, Qin, C. L., Gu, L., Gonzalez Sanchez, Sergio, Shluger, A., Fecht, H.-J., Louzguine-Luzgin, Dimitri and Inoue, Akihisa (2011) Structure and nano-mechanical characteristics of surface oxide layers on a metallic glass. Nanotechnology, 22 (9). 095704. ISSN 0957-4484

Chaudhry, Aqif, Yan, Haixue, Gong, Keenan, Inam, Fawad, Viola, Giuseppe, Reece, Michael, Goodall, Josephine, ur Rehman, Ihtesham, McNeil-Watson, Fraser, Corbett, Jason, Knowles, Jonathan and Darr, Jawwad (2011) High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering. Acta Biomaterialia, 7 (2). pp. 791-799. ISSN 1742-7061

Chirwa, Dumisani, Samwinga, Victor and Shakantu, Winston (2011) Timely project delivery: a case study of Malawian educational projects. In: The Sixth Built Environment Conference, 31 July – 2 August 2011, Johannesburg, South Africa.

Cho, Johann, Inam, Fawad, Reece, Michael, Chlup, Zdeněk, Dlouhy, Ivo, Shaffer, Milo and Boccaccini, Aldo (2011) Carbon nanotubes: do they toughen brittle matrices? Journal of Materials Science, 46 (14). pp. 4770-4779. ISSN 0022-2461

Coventry, Kathryn, Richardson, Alan, McIntyre, Chris and Aresh, Balaji (2011) Pullout Performance of Chemical Anchor Bolts in Fibre Concrete. In: Fibre Concrete 2011– 6th International Conference, 8-9 September 2011, Czech Technical University, Prague, Czech Republic.

D

Dai, Wei, Maropoulos, Paul, Cheung, Wai Ming and Tang, Xiaoqing (2011) Failure Knowledge based Decision-Making in Product Quality. International Journal of Product Lifecycle Management (IJPLM), 5 (2/3/4). pp. 143-163. ISSN 1743-5110

E

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) A Numerical Study for Optimizing Vehicle Dynamics Control Systems in Offset Impacts. SAE Technical Papers. pp. 2011-01. ISSN 0148-7191

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) A study on vehicle dynamic control systems and their influence on vehicle collisions improvement. In: 2011 14th International IEEE Conference on Intelligent Transportation Systems (ITSC). IEEE, pp. 704-709. ISBN 978-1-4577-2198-4

Elmarakbi, Ahmed (2011) Finite Element Analysis of Delamination Growth in Composite Materials using LS-DYNA: Formulation and implementation of new cohesive elements. In: Advances in Composite Materials: Ecodesign and Analysis. Intechopen, pp. 409-428. ISBN 978-953-307-150-3

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite Element Simulation of Axial Crush of Thin-Walled Tubes with Different Cross-Sections: Vehicle/Pole Impact Applications. International Journal of Vehicle Structures and Systems, 3 (3). ISSN 0975-3060

Elmarakbi, Ahmed, Krznaric, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Dynamic analysis of Hybrid III 3-year-old child dummy in frontal collisions. International Journal of Vehicle Safety, 5 (3). pp. 232-270. ISSN 1479-3105

Elmarakbi, Ahmed, Krznaric, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Enhancement of Vehicle/Roadside Hardware Crash: Dynamic Response of Child Occupant Involved in Vehicle/Pole Impact. In: Volume 9: Transportation Systems; Safety Engineering, Risk Analysis and Reliability Methods; Applied Stochastic Optimization, Uncertainty and Probability. American Society of Mechanical Engineers, pp. 91-99. ISBN 978-0-7918-5495-2

F

French, Lee, Samwinga, Victor and David, Proverbs (2011) The UK sewer network: Perceptions of its condition and role in flood risk. In: Flood Hazards: Impacts and Responses for the Built Environment. CRC Press, Boca Raton, FL, pp. 75-88. ISBN 978-1439826256

Furber, Alison and Crapper, Martin (2011) Culture in Rural Water and Sanitation Projects: a Case Study. In: 35th WEDC International Conference, 6-8 July 2011, Loughborough.

G

Gonzalez Sanchez, Sergio, Chen, N., Zhang, Q. S., Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2011) Effect of shear bands initiated in the pre-yield region on the deformation behaviour of Zr-based metallic glasses. Scripta Materialia, 64 (8). pp. 713-716. ISSN 1359 6462

Gonzalez Sanchez, Sergio, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2011) Large plasticity of a Mg42Li23Cu25Y10 multiphase composite. Materials Science and Engineering: A, 528 (16-17). pp. 5576-5584. ISSN 0921 5093

Gonzalez Sanchez, Sergio, Xie, Guoqiang, Louzguine-Luzgin, Dimitri, Perepezko, John and Inoue, Akihisa (2011) Deformation and strain rate sensitivity of a Zr–Cu–Fe–Al metallic glass. Materials Science and Engineering: A, 528 (9). pp. 3506-3512. ISSN 0921 5093

Goulding, Jack and Rahimian, Farzad Pour (2011) A game-like virtual reality construction site simulator for non-collocated collaboration in AEC environments. In: 11th International Conference on Construction Applications for Virtual Reality, 3-4 November 2011, Weimar.

Greenwood, David, Alwan, Zaid, Hudson, Gordon, Siddall, Mark and Walker, Peter (2011) A Process Model for Sustainable Design of Buildings: Towards an adaptable ‘Route Map’ for Green Code Compliance. Built and Natural Environment Research Papers, 4 (1). pp. 11-19. ISSN 1756-2473

Greenwood, David, Lockley, Steve, Jones, Oliver and Jones, Paul (2011) The efficacy of realistic virtual environments in capturing user experience of buildings. In: CIB W78-W102 2011: Computer, Knowledge, Building, 26-28 October 2011, Sophia Antipolis.

Gruber, D., Li, Yifan, Smith, Stewart, Tiwari, Abishek, Deng, F., Stokes, Adam, Terry, Jonathan, Bunting, A., Mackay, Logan and Langridge-Smith, Pat (2011) Test structures and a measurement system for characterising the lifetime of EWOD devices. In: Microelectronic Test Structures (ICMTS), 2011 IEEE International Conference on. IEEE, Piscataway, NJ, pp. 80-84. ISBN 978-1-4244-8526-0

Guan, Zhongwei, Vo, Thuc and Cantwell, Wesley (2011) Modelling blast response of fibre metal laminates. In: 4th ICMEM International Conference on Mechanical Engineering and Mechanics (ICMEM 2011), China.

H

Hadavinia, Homayoun, Dogan, F., Elmarakbi, Ahmed and Khalili, S. M. R. (2011) Modelling of Low Velocity Impact of Laminated Composite Substructures. International Journal of Vehicle Structures and Systems, 3 (2). pp. 96-106. ISSN 0975-3060

I

Inam, Fawad, Peijs, Ton and Reece, Michael (2011) The production of advanced fine-grained alumina by carbon nanotube addition. Journal of the European Ceramic Society, 31 (15). pp. 2853-2859. ISSN 0955-2219

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. In: The Asian Symposium of Computational Heat Transfer and Fluid Flow, 22-26 September 2011, Kyoto University, Kyoto, Japan.

J

Jiang, Yinzhu, Sun, Wenping, Xu, Ben, Yan, Mi and Bahlawane, Naoufal (2011) Unusual enhancement in electrical conductivity of tin oxide thin films with zinc doping. Physical Chemistry Chemical Physics, 13 (13). pp. 5760-5763. ISSN 1463-9076

K

Khan, Fahd (2011) Investigating into advanced coatings for bandsaw blades. Doctoral thesis, Northumbria University.

Kuleshov, Andrei and Mahkamov, Khamid (2011) Mathematical simulation of compression ignition engines fuelled by biodiesel. Mediterranean Journal of Measurement and Control, 7 (4). pp. 319-325. ISSN 1743-9310

L

Li, Yifan, McKenna, Ekaterina, Parkes, William, Pitt, Andrew and Walton, Anthony (2011) The application of fixed hydrophobic patterns for confinement of aqueous solutions in proteomic microarrays. Applied Physics Letters, 99 (7). 073703. ISSN 0003-6951

Lipatnikov, Andrei N., Burluka, Alexey, Hasegawa, Tatsuya and Sabel'nikov, Vladimir A. (2011) Premixed Turbulent Flames. Journal of Combustion, 2011. pp. 1-2. ISSN 2090-1968

Liu, Y., Wang, Changhai and Li, Yifan (2011) BCB film based SAW humidity sensor. Electronics letters, 47 (18). pp. 1012-1014. ISSN 0013-5194

Lowery, David, Theobald, Kate and Walker, Sara (2011) Social and behavioural barriers to achieving low-carbon retrofits in social housing. In: RGS-IBG Annual International Conference, 31 August - 2 September 2011, London, UK.

M

Maheri, Alireza and Isikveren, Askin (2011) Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1633-1643. ISSN 0954-4062

Maheri, Mahmoud, Maheri, Alireza, Pourfallah, Saeed, Azarm, Ramin and Hadjipour, Akbar (2011) Improving the durability of straw-reinforced clay plaster cladding for earthen buildings. International Journal of Architectural Heritage, 5 (3). pp. 349-366. ISSN 1558-3058

Masheiti, Salah, Agnew, Brian and Walker, Sara (2011) An evaluation of the use of R134a and R245fa as the working fluid in an organic Rankine Cycle energized from a low temperature geothermal energy source. Journal of Energy and Power Engineering, 5 (5). pp. 392-402. ISSN 1359-4311

Milsom, Ben, Viola, Giuseppe, Inam, Fawad and Reece, Michael (2011) The effect of CNTs on the sintering and grain growth of ceramics. In: SINTERING 2011, 28 August - 1 September 2011, Jeju, South Korea.

Murphy, Martina, Heaney, George and Perera, Srinath (2011) A methodology for evaluating construction innovation constraints through project stakeholder competencies and FMEA. Construction innovation: information, process, management, 11 (4). pp. 416-440. ISSN 1471-4175

N

Namdeo, Anil, Tiwary, Abhishek and Farrow, Ewan (2011) Estimation of age-related vulnerability to air pollution: Assessment of respiratory health at local scale. Environment International, 37 (5). pp. 829-837. ISSN 0160-4120

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming and Goh, Yee Mey (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer, London, pp. 135-151. ISBN 978-1441983213

Ng, Bobo, Underwood, Chris and Walker, Sara (2011) Standing column wells – modeling the potential for applications in geothermal heating and cooling. International Journal of Heating, Ventilating, Air-conditioning and Refrigeration Research (HVAC&R Research), 17 (6). pp. 1089-1100. ISSN 1078-9669

P

Patel, Bhairav, Inam, Fawad, Reece, Michael, Edirisinghe, Mohan, Bonfield, William, Huang, Jie and Angadji, Arash (2011) Mechanism of chromium oxide formation in cobalt-chromium-molybdenum (F75) alloys prepared using spark plasma sintering. Advanced Engineering Materials, 13 (5). pp. 411-417. ISSN 1438-1656

Puchy, Viktor, Dusza, Ján, Hvizdos, Pavol, Inam, Fawad and Reece, Michael (2011) Mechanical and electrical properties of Al2O3-CNT nanocomposites. Chemické listy, 105 (SI). s635-s637. ISSN 1213-7103

Puchy, Viktor, Dusza, Ján, Inam, Fawad and Reece, Michael (2011) Indentation toughness of Al2O3-CNT nanocomposites. Chemické Listy, 105. pp. 842-843. ISSN 1213-7103

Pérez, Pablo, Eddahbi, Mohamed, Gonzalez Sanchez, Sergio, Garcés, Gerardo and Adeva, Paloma (2011) Refinement of the microstructure during superplastic deformation of extruded Mg94Ni3Y1.5CeMM1.5 alloy. Scripta Materialia, 64 (1). pp. 33-36. ISSN 1359 6462

R

Rahimian, Farzad Pour and Goulding, Jack (2011) Strategies and opportunities for exploiting game theory approaches in virtual AEC tele-collaboration. In: CONVR2011, Proceedings of the 11th International Conference on Construction Applications of Virtual Reality 2011. Bauhaus-Universität. ISBN 9783860684580

Rahimian, Farzad Pour and Ibrahim, Rahinah (2011) Impacts of VR 3D sketching on novice designers’ spatial cognition in collaborative conceptual architectural design. Design Studies, 32 (3). pp. 255-291. ISSN 0142-694X

Rahimian, Farzad Pour, Ibrahim, Rahinah, Wirza, Rahmita, Abdullah, Muhamad Taufik and Jaafar, Mohd Saleh (2011) Mediating cognitive transformation with VR 3D sketching during conceptual architectural design process. Archnet-IJAR, 5 (1). pp. 99-113. ISSN 1938-7806

Richardson, Alan (2011) Equating steel and synthetic fibre concrete post crack performance to BS EN 14651:2005+A1:2007. In: Northumbria Research Conference, 5-6 May 2011, Northumbria University, Newcastle-upon-Tyne.

Richardson, Alan, Coventry, Kathryn and Bacon, Jennifer (2011) Freeze/thaw durability of concrete with recycled demolition aggregate compared to virgin aggregate concrete. Journal of Cleaner Production, 19 (2-3). pp. 272-277. ISSN 0959-6526

Richardson, Alan, Coventry, Kathryn, Dave, Urmil V. and Pienaar, Jaques (2011) Freeze/Thaw performance of concrete using granulated rubber crumb. Journal of Green Building, 6 (1). pp. 83-92. ISSN 1552-6100

Richardson, Alan, Coventry, Kathryn and Morgan, Miles (2011) Elevated temperature concrete curing - using polypropylene fibres. In: Fibre Concrete 2011 – 6th International Conference,, 8-9 September 2011, Czech Technical University, Prague, Czech Republic,.

Richardson, Alan, Coventry, Kathryn and Pienaar, Jaques (2011) The Potential for Achieving Freeze/Thaw Protection in Concrete through the addition of Rubber Crumb. Built and Natural Environment Research Papers, 4 (1). pp. 110-126. ISSN 1756-2473

Richardson, Alan, Coventry, Kathryn and Pienaar, Jaques (2011) The Potential for Achieving Freeze/Thaw Protection in Concrete through the addition of Rubber Crumb. In: First International Conference on Future Intermediate Sustainable Cities, a message for Future Generations, Smart Materials, 23-25 November 2010, British University in Egypt.

Richardson, Alan and Drew, Paula (2011) Fibre reinforced polymer and steel rebar comparative performance. Structural Survey, 29 (1). pp. 63-74. ISSN 0263-080X

Richardson, Alan, Hemapanpairo, Kawin, Sae-Tae, Thotsaphorn and Puthipad, Nipat (2011) Oolitic limestone and marine sandstone gravel aggregate Early life concrete and aggregate freeze/thaw test for durability. Built and Natural Environment Research Papers, 4 (2). pp. 149-286.

Richardson, Alan and Jackson, P. (2011) Equating steel and synthetic fibre concrete post crack performance. In: 2nd International Conference on Current Trends in Technology NUiCONE, 8-10 September 2011, Nirma University, Ahmedabad, India.

Richardson, Thomas, Beaverstock, Christopher, Isikveren, Askin, Maheri, Alireza, Badcock, Ken and Da Ronch, Andrea (2011) Analysis of the Boeing 747-100 using CEASIOM. Progress in Aerospace Sciences, 47 (8). pp. 660-673. ISSN 0376-0421

S

Safari, Davoud, Maheri, Alireza and Maheri, Mahmoud (2011) Optimum design of steel frames using a multiple-deme GA with improved reproduction operators. Journal of Constructional Steel Research, 67 (8). pp. 1232-1243. ISSN 1873-5983

Salem, Ghozzia and Mahkamov, Khamid (2011) Case study: Modelling and sizing stand-alone PV systems for powering mobile phone stations in Libya. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (11). pp. 2891-2898. ISSN 1650-3686

Shyha, Islam, Soo, Sein Leung, Aspinwall, David and Bradley, Sam (2011) The effect of peel ply layer on hole integrity when drilling carbon fibre-reinforced plastic. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 225 (7). pp. 1217-1223. ISSN 0954-4054

Shyha, Islam, Soo, Sein Leung, Aspinwall, David, Bradley, Sam, Perry, Richard, Harden, Peter and Dawson, Stuart (2011) Hole quality assessment following drilling of metallic-composite stacks. International Journal of Machine Tools and Manufacture, 51 (7-8). pp. 569-578. ISSN 0890-6955

Small, Adrian, Zahiroddiny, Sonia, Udeaja, Chika, Wainwright, David and Greenwood, David (2011) Towards a prototype development for material procurement using SharePoint. In: ARCOM 27th Annual Conference, 5-7 September 2011, Bristol.

Subhani, Tayyab, Cho, Johann, Inam, Fawad, Reece, Michael, Lee, William Edward, Boccaccini, Aldo and Schaffer, Milo (2011) Glass composites containing carbon nanotubes: Processing, characterisation and prospects for toughening. In: 35th International Conference and Exposition on Advanced Ceramics and Composites (ICACC 2011), 23-28 January, 2011, Daytona Beach, FL, USA.

T

Tang, C., Blacklock, Matthew and Hayhurst, D. R. (2011) Stress—strain response and thermal conductivity degradation of ceramic matrix composite fiber tows in 0—90° uni-directional and woven composites. Journal of Composite Materials, 45 (14). pp. 1461-1482. ISSN 0021-9983

Tiwary, Abhishek, Namdeo, Anil, Dore, Anthony and Bell, Margaret (2011) Aerosol loading in an urban environment from a biofuel based CHP plant: assessment and mitigation. Procedia Environmental Sciences, 4. pp. 71-75. ISSN 1878-0296

Tiwary, Abhishek, Robins, Alan, Namdeo, Anil and Bell, Margaret (2011) Air flow and concentration fields at urban road intersections for improved understanding of personal exposure. Environment International, 37 (5). pp. 1005-1018. ISSN 0160-4120

Toll, D. G., Lourenco, S. D., Mendes, Joao, Gallipoli, D., Evans, F. D., Augarde, C. E., Cui, Y. J., Tang, A. M., Rojas, J. C., Pagano, L., Mancuso, C., Zingariello, C. and Tarantino, A. (2011) Soil suction monitoring for landslides and slopes. Quarterly Journal of Engineering Geology and Hydrogeology, 44 (1). pp. 23-33. ISSN 1470-9236

V

Vo, Thuc and Lee, Jaehong (2011) Free vibration of axially loaded thin-walled composite Timoshenko beams. Archive of Applied Mechanics, 81 (9). pp. 1165-1180. ISSN 0939-1533

Vo, Thuc and Lee, Jaehong (2011) Geometrical nonlinear analysis of thin-walled composite beams using finite element method based on first order shear deformation theory. Archive of Applied Mechanics, 81 (4). pp. 419-435. ISSN 0939-1533

Vo, Thuc, Lee, Jaehong, Lee, Kihak and Ahn, Namshik (2011) Vibration analysis of thin-walled composite beams with I-shaped cross-sections. Composite Structures, 93 (2). 812 - 820. ISSN 0263-8223

W

Walker, Sara (2011) Building mounted wind turbines and their suitability for the urban scale — a review of methods of estimating urban wind resource. Energy and Buildings, 43 (8). pp. 1852-1862. ISSN 0378-7788

Walker, Sara, Beacock, Peter and Perera, Srinath (2011) Educating the global citizen in sustainable development: the influence of accreditation bodies on professional programmes. EMERGE, 3. pp. 43-54.

Warren, Craig and Giannopoulos, Antonios (2011) Creating finite-difference time-domain models of commercial ground-penetrating radar antennas using Taguchi's optimization method. Geophysics, 76 (2). G37-G47. ISSN 0016-8033

Watson, Paul and Howarth, Tim (2011) Construction Quality Management: Principles and Practice. Routledge, London. ISBN 978-0415569118

White, Ashley, Inam, Fawad, Pattinson, Sebastian, Reece, Michael, Windle, Alan and Best, Serena (2011) Comparison of properties and microstructure of dense hydroxyapatite-carbon nanotube composites prepared by spark plasma sintering and pressureless sintering. In: 2011 MRS Spring Meeting & Exhibit, 26-29 April 2011, San Francisco, USA.

Wiratama, I. Kade and Maheri, Alireza (2011) An investigation into the potential use of microtabs in enhancing energy capture capability of wind turbines. In: 12th International Conference on QiR (Quality in Research), 4 July - 7 July 2011, Bali, Indonesia.

Woods, Thomas, Cheung, Wai Ming, Penlington, Roger and Hilton, Kevin (2011) Long term sustainable product development at the packaging sector. In: 9th International Conference on Manufacturing Research, 6 - 8 September 2011, Glasgow Caledonian University.

Y

Yan, Haixue, Inam, Fawad, Viola, Giuseppe, Ning, Huanpo, Zhang, Hingtao, Jiang, Qinghui, Zeng, Tao, Gao, Zhipeng and Reece, Michael (2011) The contribution of electrical conductivity, dielectric permittivity and domain switching in ferroelectric hysteresis loops. Journal of Advanced Dielectrics, 01 (01). pp. 107-118. ISSN 2010-135X

This list was generated on Wed Dec 11 08:57:03 2024 UTC.