Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2016

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items: 242.

A

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2016) A proposed research methodology to investigate the lack of lean manufacturing implementation in Libyan manufacturing companies. In: EURO 2016 - 28th European Conference on Operational Research, 3rd - 6th July 2016, Poznań, Poland.

Al Habis, Nuha, Liu, Chang, Dumuids, Jean-Baptiste and Lafdi, Khalid (2016) Intelligent design of conducting network in polymers using numerical and experimental approaches. RSC Advances, 6 (97). pp. 95010-95020. ISSN 2046-2069

Al-Maghalseh, Maher and Maharmeh, Elias (2016) Economic and Technical Analysis of Distributed Generation Connection: A Wind Farm Case Study. Procedia Computer Science, 83. pp. 790-798. ISSN 1877-0509

Alafogianni, Maria, Penlington, Roger and Birkett, Martin (2016) Resistor trimming geometry; past, present and future. IOP Conference Series: Materials Science and Engineering, 104. 012002. ISSN 1757-899X

Alazmi, Amira, El Tall, Omar, Rasul, Shahid, Hedhili, Mohamed N., Patole, Shashikant P. and Costa, Pedro M. F. J. (2016) A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide. Nanoscale, 8 (41). pp. 17782-17787. ISSN 2040-3364

Alazmi, Amira, Rasul, Shahid, Patole, Shashikant P. and Costa, Pedro M.F.J. (2016) Comparative study of synthesis and reduction methods for graphene oxide. Polyhedron, 116. pp. 153-161. ISSN 0277-5387

Ali, Abdalla (2016) Development of a Multi-Objective Scheduling System for Complex Job Shops in a Manufacturing Environment. Doctoral thesis, Northumbria University.

Ali, Abdalla, Birkett, Martin, Hackney, Philip and Bell, David (2016) Efficient nondominated sorting with genetic algorithm for solving multi-objective job shop scheduling problems. In: 2016 International Conference Multidisciplinary Engineering Design Optimization (MEDO). IEEE, Piscataway. ISBN 978-1-5090-2113-0

Aljanabi, Darkam, Birkett, Martin and Connor, Chris (2016) Investigating the need of Total Productive Maintenance (TPM) Framework Development for Deployment within the Iraqi Power Generation Industry. Journal of Maintenance Engineering, 1. pp. 437-446.

Allinson, David, Irvine, Katherine, Edmondson, Jill, Tiwary, Abhishek, Hill, Graeme, Morris, Jonathan, Bell, Margaret, Davies, Zoe, Firth, Steven, Fisher, Jill, Gaston, Kevin, Leake, Jonathan, McHugh, Nicola, Namdeo, Anil, Rylatt, Mark and Lomas, Kevin (2016) Measurement and analysis of household carbon: The case of a UK city. Applied Energy, 164. pp. 871-881. ISSN 0306-2619

Allwood, Julian, Childs, Tom, Clare, Adam, De Silva, Anjali, Dhokia, Vimal, Hutchings, Ian, Leach, Richard, Leal-Ayala, David, Lowth, Stewart, Majewski, Candice, Marzano, Adelaide, Mehnen, Jörn, Nassehi, Aydin, Ozturk, Erdem, Raffles, Mark, Roy, Raj, Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Anjum, Dalaver, Rasul, Shahid, Roldan-Gutierrez, Manuel A. and Costa, Pedro M. F. J. (2016) Characterization of a Porous Carbon Material Functionalized with Cobalt-Oxide/Cobalt Core-Shell Nanoparticles for Lithium Ion Battery Electrodes. MRS Advances, 1 (15). pp. 1061-1066. ISSN 2059-8521

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of 0.5 wt% multi-layer graphene/nanoclay reinforced epoxy nanocomposites. AIMS Materials Science, 3 (3). pp. 1266-1280. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of monolithic epoxy with tailored topography. World Journal of Engineering and Technology, 4 (4). pp. 517-527. ISSN 2331-4249

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis with topographical features of multi-layer graphene reinforced epoxy nanocomposites. Graphene, 5 (4). pp. 166-177. ISSN 2169-3439

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on damage tolerance and fracture toughness of 0.1 wt % multi-layer graphene/clay-epoxy nanocomposites. Polymers, 8 (7). p. 239. ISSN 2073-4360

Atif, Rasheed and Inam, Fawad (2016) Influence of macro-topography on mechanical performance of 0.5 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. AIMS Materials Science, 3 (4). pp. 1294-1308. ISSN 2372-0484

Atif, Rasheed and Inam, Fawad (2016) Modeling and simulation of graphene based polymer nanocomposites: advances in the last decade. Graphene, 5 (2). pp. 96-142. ISSN 2169-3471

Atif, Rasheed and Inam, Fawad (2016) Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein Journal of Nanotechnology, 7. pp. 1174-1196. ISSN 2190-4286

Atif, Rasheed and Inam, Fawad (2016) The dissimilarities between graphene and frame-like structures. Graphene, 5 (2). pp. 55-72. ISSN 2169-3471

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) Mechanical, thermal, and electrical properties of graphene-epoxy nanocomposites - a review. Polymers, 8 (8). p. 281. ISSN 2073-4360

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties due to stress concentration caused by retained acetone in epoxy nanocomposites. RSC Advances, 6 (41). pp. 34188-34197. ISSN 2046-2069

Atif, Rasheed, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) Use of morphological features of carbonaceous materials for improved mechanical properties of epoxy nanocomposites. RSC Advances, 6. pp. 1351-1359. ISSN 2046-2069

Atkins, M. D., Dala, Laurent and Kim, T. (2016) Time-Averaged Behavior of Gap Flow Between Two Side-by-Side Circular Cylinders. AIAA Journal, 54 (9). pp. 2742-2754. ISSN 0001-1452

Azimov, Ulugbek, Kawahara, Nobuyuki and Tomita, Eiji (2016) Quantum cascade laser assisted time-resolved measurements of carbon dioxide absorption during combustion in DME-HCCI engine. Fuel, 182. pp. 807-815. ISSN 0016 2361

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Micromechanics Modelling of Graphene Platelets Reinforced Polymer Composite Materials With Imperfect Interfaces. In: IMECE 2016 - ASME 2016 International Mechanical Engineering Congress and Exposition, 11th - 17th November 2016, Phoenix, United States.

B

Barton, Lewis and Birkett, Martin (2016) Mechanical behaviour of adhesively bonded polyethylene tapping tees. International Journal of Adhesion & Adhesives, 66. pp. 1-8. ISSN 0143-7496

Birkett, Martin and Penlington, Roger (2016) Electrical resistivity of CuAlMo thin films grown at room temperature by dc magnetron sputtering. Materials Research Express, 3 (7). 075021. ISSN 2053-1591

Blacklock, Matthew, Joosten, Mathew W., Pingkarawat, Khomkrit and Mouritz, Adrian P. (2016) Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique. Composites Part A: Applied Science and Manufacturing, 91 (1). pp. 283-291. ISSN 1359-835X

Blacklock, Matthew, Shaw, John H., Zok, Frank W. and Cox, Brian N. (2016) Virtual specimens for analyzing strain distributions in textile ceramic composites. Composites Part A: Applied Science and Manufacturing, 85. pp. 40-51. ISSN 1359-835X

Borri, Antonio, Sisti, Romina, Corradi, Marco and Giannantoni, Andrea (2016) Experimental analysis of masonry ring beams reinforced with composite materials. In: Brick and Block Masonry - Trends, Innovations and Challenges: Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016. CRC Press, London, pp. 717-726. ISBN 9781138029996, 9781315374963

Bortot, Eliana, Denzer, Ralf, Menzel, Andreas and Gei, Massimiliano (2016) Analysis of viscoelastic soft dielectric elastomer generators operating in an electrical circuit. International Journal of Solids and Structures, 78-79. pp. 205-215. ISSN 0020-7683

Borzacchiello, D., Vermiglio, S., Chinesta, F., Nabat, S. and Lafdi, Khalid (2016) Numerical simulation of electrified jets: An application to electrospinning. AIP Conference Proceedings, 1769. 050004. ISSN 0094-243X

Bouazza, Touria, Greenwood, David and Udeaja, Chika (2016) A Framework for managing knowledge using Building Information Modelling (BIM) in a Supply Chain Environment. In: First International Conference of the BIM Academic Forum, 13-15 September 2016, Glasgow.

Bouazza, Touria, Udeaja, Chika and Greenwood, David (2016) Towards Developing a Framework for Managing Knowledge Using BIM Methodology in a Supply Chain. In: 16th International Conference on Computing in Civil and Building Engineering (ICCCBE2016), 6-8 July 2016, Osaka.

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2016) Effect of very high compaction pressures on the physical and mechanical properties of earthen materials. E3S Web of Conferences, 9. p. 14004. ISSN 2267-1242

Bull, John W. (2016) Computer analysis and design of masonry structures. Saxe-Coburg Publications. ISBN 978-1-874672-44-9

Buratti, Cinzia, Belloni, Elisa, Lunghi, L., Borri, Antonio, Castori, G. and Corradi, Marco (2016) Mechanical characterization and thermal conductivity measurements using of a new 'small hot-box' apparatus: innovative insulating reinforced coatings analysis. Journal of Building Engineering, 7. pp. 63-70. ISSN 2352-7102

Burluka, Alexey, Gaughan, R. G., Griffiths, J. F., Mandilas, C., Sheppard, C. G. and Woolley, R. (2016) Turbulent burning rates of gasoline components, Part 1 – Effect of fuel structure of C 6 hydrocarbons. Fuel, 167. pp. 347-356. ISSN 0016-2361

Burluka, Alexey, Gaughan, R. G., Griffiths, J. F., Mandilas, C., Sheppard, C. G. and Woolley, R. (2016) Turbulent burning rates of gasoline components, Part 2 – Effect of carbon number. Fuel, 167. pp. 357-365. ISSN 0016-2361

Butt, Talib E., Javadi, A. A., Nunns, M. A. and Beal, Cara (2016) Development of a conceptual framework of holistic risk assessment - Landfill as a particular type of contaminated land. Science of the Total Environment, 569-57. pp. 815-829. ISSN 0048-9697

Butt, Talib E., Jones, Keith, Savic, Dragan, Gorse, Christopher, Hudson, Jonathan and Paul, Pameet (2016) Built Environments and 'Direct' Energy Consumption - A conceptual methodology framework to facilitate delivery of the Climate Change Act 2008. Environmental Engineering and Management Journal, 15 (5). pp. 1155-1171. ISSN 1582-9596

C

Candela, Michele, Borri, Antonio, Corradi, Marco and Righetti, Luca (2016) Effect of transversal steel connectors on the behaviour of rubble stone-masonry walls: two case studies in Italy. In: 16th International Brick and Block Masonry Conference, 26th - 30th June 2016, Padua.

Castori, Giulio, Borri, Antonio and Corradi, Marco (2016) Behavior of thin masonry arches repaired using composite materials. Composites Part B: Engineering, 87. pp. 311-321. ISSN 1359-8368

Castori, Giulio, Borri, Antonio, Sisti, Romina, Corradi, Marco and De Maria, Alessandro (2016) Seismic analysis of artistic assets: the Piero della Francesca’s fresco called “Resurrection”. In: 10th International conference on Structural Analysis of Historical Constructions (SAHC 2016), 13th -15th September 2016, Leuven.

Chan, Lydia, Shyha, Islam, Dreyer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. In: 4th Asia Conference on Mechanical and Materials Engineering, 14-18 July 2016, Kuala Lumpur.

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2016) Weld overlay cladding repair - An investigation of tensile strength variation in processed metallic substrate. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Chan, Lydia, Shyha, Islam, Dryer, Dale and Hamilton, John (2016) Optimisation of Weld Overlay Cladding Parameters Using Full-Factorial Design of Experiment. Materials Science Forum, 880. pp. 54-58. ISSN 1662-9752

Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Thompson, James (2016) Aircraft Ice Accretion Prediction Using Neural Network and Wavelet Packet Transform. Aircraft Engineering and Aerospace Technology, 88 (1). pp. 128-136. ISSN 0002-2667

Che, Huinan, Chen, Jibin, Huang, Kai, Hu, Wei, Hu, Hao, Liu, Xiaoteng, Che, Guangbo, Liu, Chunbo and Shi, Weidong (2016) Construction of SrTiO3/Bi2O3 heterojunction towards to improved separation efficiency of charge carriers and photocatalytic activity under visible light. Journal of Alloys and Compounds, 688. pp. 882-890. ISSN 0925-8388

Chen, Chin-Fan, Wang, Chi-Jo, Maheri, Alireza and Macquart, Terence (2016) Wind turbine blade load alleviation performance employing individual pitch control. In: Proceedings of the 3rd International Conference on Intelligent Technologies and Engineering Systems (ICITES2014). Lecture Notes in Electrical Engineering, 345 . Springer, London, pp. 215-224. ISBN 9783319173139

Chen, Xue and Meguid, S. A. (2016) Asymmetric bifurcation of thermally and electrically actuated functionally graded material microbeam. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2186). p. 20150597. ISSN 1364-5021

Chen, Yan, Feng, Huijuan, Ma, Jiayao, Peng, Rui and You, Zhong (2016) Symmetric waterbomb origami. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2190). p. 20150846. ISSN 1364-5021

Chen, Ziguang, Chen, Chao, Wei, Shen, Wu, Yuqin, Wang, Yafeng and Wan, Yali (2016) Impact of the external window crack structure on indoor PM2.5 mass concentration. Building and Environment, 108. pp. 240-251. ISSN 0360-1323

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2016) Ontological approach for organisational knowledge re-use in product developing environments. In: IEEE International Technology Management Conference 2005, 20-22 June 2005, Munich, Germany.

Comak, Gurbuz, Foltran, Stéphanie, Ke, Jie, Pérez, Eduardo, Sanchez Vicente, Yolanda, George, Michael W. and Poliakoff, Martyn (2016) A synthetic-dynamic method for water solubility measurements in high pressure CO 2 using ATR–FTIR spectroscopy. The Journal of Chemical Thermodynamics, 93. pp. 386-391. ISSN 0021-9614

Constanda, Sabrina, Stan, Miruna Silvia, Ciobanu, Carmen Steluţa, Motelica-Heino, Mikael, Guégan, Régis, Lafdi, Khalid, Dinischiotu, Anca and Predoi, Daniela (2016) Carbon Nanotubes-Hydroxyapatite Nanocomposites for an Improved Osteoblast Cell Response. Journal of Nanomaterials, 2016. pp. 1-10. ISSN 1687-4110

Corradi, Marco, Borri, Antonio, Castori, Giulio and Speranzini, Emanuela (2016) Fully reversible reinforcement of softwood beams with unbonded composite plates. Composite Structures, 149. pp. 54-68. ISSN 0263-8223

D

Deng, Yuming, Wang, Gang, Fei, Ming Ming, Huang, Xin, Cheng, Jigui, Liu, Xiaoteng, Xing, Lei, Scott, Keith and Xu, Chenxi (2016) A polybenzimidazole/graphite oxide based three layer membrane for intermediate temperature polymer electrolyte membrane fuel cells. RSC Advances, 6 (76). pp. 72224-72229. ISSN 2046-2069

Dilpazir, S., Usman, M., Rasul, Shahid and Arshad, S. N. (2016) A simple UV-ozone surface treatment to enhance photocatalytic performance of TiO2 loaded polymer nanofiber membranes. RSC Advances, 6 (18). pp. 14751-14755. ISSN 2046-2069

Dodd, Linzi, Geraldi, Nicasio, Xu, Ben, McHale, Glen, Wells, Gary, Stuart-Cole, Simone, Martin, James, Newton, Michael and Wood, David (2016) Low friction droplet transportation on a substrate with a selective Leidenfrost effect. ACS Applied Materials & Interfaces, 8 (34). pp. 22658-22663. ISSN 1944-8244

Du, Hu, Jones, Phil and Ng, Bobo (2016) Understanding the reliability of localized near future weather data for building performance prediction in the UK. In: 2016 IEEE International Smart Cities Conference (ISC2). IEEE, pp. 529-532. ISBN 978-1-5090-1845-1

E

Ebrahimi, Mohammadreza, Crapper, Martin and Ooi, Jin (2016) Numerical and experimental study of horizontal pneumatic transportation of spherical and low-aspect-ratio cylindrical particles. Powder Technology, 293. pp. 48-59. ISSN 0032-5910

Efika, Emmanuel C., Hoballah, Rayane, Li, Xuesong, May, Eric F., Nania, Manuela, Sanchez Vicente, Yolanda and Martin Trusler, J.P. (2016) Saturated phase densities of (CO2 + H2O) at temperatures from (293 to 450) K and pressures up to 64 MPa. The Journal of Chemical Thermodynamics, 93. pp. 347-359. ISSN 0021-9614

Ekoh, Solomon, Unsal, Ibrahim and Maheri, Alireza (2016) Optimal sizing of wind-PV-pumped hydro energy storage systems. In: Proceedings of the 4th International Symposium on Environmental Friendly Energies and Applications (EFEA). IEEE, pp. 1-6. ISBN 978-1-5090-0749-3

El Hasadi, Yousef and Crapper, Martin (2016) Simulating the Hydrodynamics of Self-Propelled Colloidal Clusters using Stokesian Dynamics. Biomicrofluidics, 10 (6). ISSN 1932-1058

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2016) Identifying the barriers behind the lack of Six Sigma use in Libyan manufacturing companies. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (5). pp. 829-833.

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2016) A proposed mixed method methodology to identify the factors impeding the adoption of six sigma in Libyan manufacturing companies. In: Proceedings of the 2nd International Conference on Advances in Mechanical Engineering Istanbul 2016. Yildiz Technical University, Istanbul, pp. 49-52. ISBN 9786056590719

Elkady, Mostafa, Elmarakbi, Ahmed and MacIntyre, John (2016) Using an Extendable Bumper With an Aid of Vehicle Dynamics Control System to Improve the Occupant Safety in Frontal Vehicle-to-Vehicle Collision Scenario. In: IMECE 2016 - ASME 2016 International Mechanical Engineering Congress and Exposition, 11th - 17th November 2016, Phoenix, United States.

Elkady, Mustafa, Elmarakbi, Ahmed, MacIntyre, John and Al Hariri, Mohammad (2016) Multi-Body Integrated Vehicle-Occupant Models for Collision Mitigation and Vehicle Safety using Dynamics Control Systems. International Journal of System Dynamics Applications, 5 (2). pp. 80-122. ISSN 2160-9772

Elmarakbi, Ahmed, Jianhua, Wang and Azoti, Wiyao (2016) Non-linear elastic moduli of Graphene sheet-reinforced polymer composites. International Journal of Solids and Structures, 81. pp. 383-392. ISSN 0020-7683

Elmarakbi, Ahmed, Safty, Sherif El, Martorana, Brunetto and Azoti, Wiyao (2016) Nanocomposites for automotive: enhanced graphene-based polymer materials and multi-scale approach. International Journal of Automotive Composites, 2 (2). p. 155. ISSN 2051-8218

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2016) Investigation of a new effective viscosity model for nanofluids. Procedia Engineering, 157. pp. 404-413. ISSN 1877-7058

F

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2016) An Empirical Analysis of the Factors That Support the Drivers of Sustainable Manufacturing. Procedia CIRP, 56. pp. 491-495. ISSN 2212-8271

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Modal interactions in primary and subharmonic resonant dynamics of imperfect microplates with geometric nonlinearities. Acta Mechanica Sinica, 32 (3). pp. 469-480. ISSN 0567-7718

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Nonlinear coupled dynamics of shear deformable microbeams. International Journal of Dynamics and Control, 4 (4). pp. 492-503. ISSN 2195-268X

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Nonlinear size-dependent dynamics of an imperfect shear deformable microplate. Journal of Sound and Vibration, 361. pp. 226-242. ISSN 0022-460X

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Nonlinear size-dependent dynamics of microarches with modal interactions. Journal of Vibration and Control, 22 (17). pp. 3679-3689. ISSN 1077-5463

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Size-dependent behaviour of electrically actuated microcantilever-based MEMS. International Journal of Mechanics and Materials in Design, 12 (3). pp. 301-315. ISSN 1569-1713

Farokhi, Hamed and Ghayesh, Mergen H. (2016) Size-dependent parametric dynamics of imperfect microbeams. International Journal of Engineering Science, 99. pp. 39-55. ISSN 0020-7225

Farokhi, Hamed, Ghayesh, Mergen H. and Hussain, Shahid (2016) Dynamic stability in parametric resonance of axially excited Timoshenko microbeams. Meccanica, 51 (10). pp. 2459-2472. ISSN 0025-6455

Farokhi, Hamed, Ghayesh, Mergen H. and Hussain, Shahid (2016) Large-amplitude dynamical behaviour of microcantilevers. International Journal of Engineering Science, 106. pp. 29-41. ISSN 0020-7225

Farokhi, Hamed, Ghayesh, Mergen H. and Hussain, Shahid (2016) Pull-in characteristics of electrically actuated MEMS arches. Mechanism and Machine Theory, 98. pp. 133-150. ISSN 0094-114X

Farokhi, Hamed, Ghayesh, Mergen H. and Hussain, Shahid (2016) Three-Dimensional Nonlinear Global Dynamics of Axially Moving Viscoelastic Beams. Journal of Vibration and Acoustics, 138 (1). 011007. ISSN 0739-3717

Farokhi, Hamed, Ghayesh, Mergen H., Kosasih, Buyung and Akaber, Parisa (2016) On the nonlinear resonant dynamics of Timoshenko microbeams: effects of axial load and geometric imperfection. Meccanica, 51 (1). pp. 155-169. ISSN 0025-6455

Farokhi, Hamed, Païdoussis, Michael P. and Misra, Arun K. (2016) A new nonlinear model for analyzing the behaviour of carbon nanotube-based resonators. Journal of Sound and Vibration, 378. pp. 56-75. ISSN 0022-460X

Farrell, Peter, Sheratt, Fred and Richardson, Alan (2016) Laboratory experiments for dissertations and projects. In: Writing Built Environment Dissertations and Projects: Practical Guidance and Examples, 2nd edition. Wiley-Blackwell, Oxford, pp. 140-164. ISBN 9781118921920

Feng, Huijuan, Kang, Rongjie and Chen, Yan (2016) Workspace Analysis of a Reconfigurable Mechanism Generated from the Network of Bennett Linkages. In: Advances in Reconfigurable Mechanisms and Robots II. Mechanisms and Machine Science (36). Springer, Cham, pp. 153-163. ISBN 9783319233260, 9783319233277

G

Gallimore, Alexandra and Cheung, Wai Ming (2016) Effects of Environmental Impact Based on Alternative Materials and Process Selection in Automotive Components Design. Journal of Industrial and Production Engineering, 33 (5). pp. 321-338. ISSN 2168-1015

Gariani, Salah, Shyha, Islam and Inam, Fawad (2016) Effect of cutting tools and working conditions on the machinability of TI-6AL-4V using vegetable oil-based cutting fluids. In: International Conference on Advances in Mechanical Engineering, 10-13 May 2016, Istanbul.

Geraldi, Nicasio, McHale, Glen, Xu, Ben, Wells, Gary, Dodd, Linzi, Wood, David and Newton, Michael (2016) Leidenfrost transition temperature for stainless steel meshes. Materials Letters, 176. pp. 205-208. ISSN 0167-577X

Ghayesh, Mergen H. and Farokhi, Hamed (2016) Coupled size-dependent behavior of shear deformable microplates. Acta Mechanica, 227 (3). pp. 757-775. ISSN 0001-5970

Ghayesh, Mergen H. and Farokhi, Hamed (2016) Nonlinear Dynamical Behavior of Axially Accelerating Beams: Three-Dimensional Analysis. Journal of Computational and Nonlinear Dynamics, 11 (1). 011010. ISSN 1555-1415

Ghayesh, Mergen H. and Farokhi, Hamed (2016) Parametric instability of microbeams in supercritical regime. Nonlinear Dynamics, 83 (3). pp. 1171-1183. ISSN 0924-090X

Ghayesh, Mergen H., Farokhi, Hamed and Alici, Gursel (2016) Internal Energy Transfer in Dynamical Behavior of Slightly Curved Shear Deformable Microplates. Journal of Computational and Nonlinear Dynamics, 11 (4). 041002. ISSN 1555-1415

Ghayesh, Mergen H., Farokhi, Hamed and Alici, Gursel (2016) Size-dependent performance of microgyroscopes. International Journal of Engineering Science, 100. pp. 99-111. ISSN 0020-7225

Ghayesh, Mergen H., Farokhi, Hamed and Hussain, Shahid (2016) Viscoelastically coupled size-dependent dynamics of microbeams. International Journal of Engineering Science, 109. pp. 243-255. ISSN 0020-7225

Gledson, Barry (2016) Exploring the Consequences of 4D BIM Innovation Adoption. In: Proceedings of the 32nd Annual ARCOM Conference, 5th - 7th September 2016, Manchester, UK.

Gledson, Barry and Dawson, Susan (2016) Use of simulation through BIM-enabled Virtual Projects to enhance learning and soft employability skills in Architectural Technology education. In: International SEEDS Conference 2016, 14th - 15th September 2016, Leeds, UK.

Gledson, Barry and Greenwood, David (2016) Surveying the extent and use of 4D BIM in the UK. Journal of Information Technology in Construction (ITcon), 21. pp. 57-71. ISSN 1874-4753

Gledson, Barry, Greenwood, David, Routledge, Peter, Watson, Richard and Woddy, Paul (2016) Preparing to work in level 2 BIM: an innovative approach to a training and educational need. In: 1st International UK BIM Academic Forum Conference, September 13th-15th, 2016, Glasgow Caledonian University.

Gledson, Barry, Hilton, Daniel and Rogage, Kay (2016) Benchmarking BIM Levels of Training and Education amongst Construction Management Practitioners. In: Proceedings of the 32nd Annual ARCOM Conference, 5th - 7th September 2016, Manchester, UK.

Gonzalez Sanchez, Sergio (2016) Role of minor additions on metallic glasses and composites. Journal of Materials Research, 31 (01). pp. 76-87. ISSN 0884-2914

Gonzalez Sanchez, Sergio, Pérez, Pablo, Garcés, Gerardo and Adeva, Paloma (2016) Influence of the processing route on the mechanical properties at high temperatures of Mg-Ni-Y-RE alloys containing LPSO-phases. Materials Science and Engineering: A, 673. pp. 266-279. ISSN 0921-5093

Grote, Rüdiger, Samson, Roeland, Alonso, Rocío, Amorim, Jorge Humberto, Cariñanos, Paloma, Churkina, Galina, Fares, Silvano, Thiec, Didier Le, Niinemets, Ülo, Mikkelsen, Teis Norgaard, Paoletti, Elena, Tiwary, Abhishek and Calfapietra, Carlo (2016) Functional traits of urban trees: air pollution mitigation potential. Frontiers in Ecology and the Environment, 14 (10). pp. 543-550. ISSN 1540-9295

H

Hafeez, Mian Atif, Ahmad, Mohammad, Chahrour, Racha, Vukovic, Vladimir, Dawood, Nashwan and Kassem, Mohamad (2016) Principles and recommendations for client information requirements for BIM enabled construction projects in Qatar. International Journal of Product Lifecycle Management, 9 (3). p. 198. ISSN 1743-5110

Hashem, Gamal (2016) Numerical and Experimental Study of Dynamic Solar Cooling System with a Liquid Piston Converter. Doctoral thesis, Northumbria University.

Hassanzadeh, Ahmad, Hassas, Behzad Vaziri, Kouachi, Sabri, Brabcova, Zuzana and Çelika, Mehmet (2016) Effect of bubble size and velocity on collision efficiency in chalcopyrite flotation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 498. pp. 258-267. ISSN 0927-7757

Hassen, D., Shenashen, M.A., El-Safty, S.A., Selim, Mahmoud M., Isago, H., Elmarakbi, Ahmed, El-Safty, A. and Yamaguchi, Hitoshi (2016) Nitrogen-doped carbon-embedded TiO 2 nanofibers as promising oxygen reduction reaction electrocatalysts. Journal of Power Sources, 330. pp. 292-303. ISSN 0378-7753

Hassen, Diab, El-Safty, Sherif A., Tsuchiya, Koichi, Chatterjee, Abhijit, Elmarakbi, Ahmed, Shenashen, Mohamed. A. and Sakai, Masaru (2016) Longitudinal Hierarchy Co3O4 Mesocrystals with High-dense Exposure Facets and Anisotropic Interfaces for Direct-Ethanol Fuel Cells. Scientific Reports, 6 (1). p. 24330. ISSN 2045-2322

Heidrich, Oliver, Reckien, Diana, Olazabal, Marta, Foley, A., Salvia, Monica, de Gregorio Hurtado, Sonia, Orru, Hans, Flacke, J., Geneletti, Davide, Pietrapertosa, Filomena, Hamann, J. J.-P., Tiwary, Abhishek, Feliu, Efren and Dawson, Richard (2016) National climate policies across Europe and their impacts on cities strategies. Journal of Environmental Management, 168. pp. 36-45. ISSN 0301-4797

Hopkinson, James, Perera, Noel and Kiazim, Evran (2016) Investigating reliability centered maintenance (RCM) for public road mass transportation vehicles. MATEC Web of Conferences, 81. 08006. ISSN 2261-236X

Hu, Zhen-Zhong, Zhang, Xiao-Yang, Wang, Heng-Wei and Kassem, Mohamad (2016) Improving interoperability between architectural and structural design models: An industry foundation classes-based approach with web-based tools. Automation in Construction, 66. pp. 29-42. ISSN 0926-5805

I

Ikegwuru, Okachi (2016) Integrated performance-reliability optimisation of systems with multi-level redundancies. Doctoral thesis, Northumbria University.

Inam, Fawad and Okolo, Chichi (2016) Fullerenes for enhanced performance of novel nano-exploited aircraft materials. In: 14th Eurasia Conference on Chemical Sciences (EuAsC2S), 15th - 18th December 2016, Karachi, Pakistan.

Inam, Fawad, Okolo, Chichi and Vo, Thuc (2016) Damage sensing ability of polymer nanocomposites filled with long, shortened and damaged carbon nanotubes. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Iqbal, Sadia Sagar, Inam, Fawad, Iqbal, Nadeem, Jamil, Tahir, Bashir, Arshad and Shahid, Mohammad (2016) Thermogravimetric, differential scanning calorimetric, and experimental thermal transport study of functionalized nanokaolinite-doped elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 125 (2). pp. 871-880. ISSN 1588-2926

K

Kamjoo, Azadeh, Maheri, Alireza, Dizqah, Arash and Putrus, Ghanim (2016) Multi-objective design under uncertainties of hybrid renewable energy system using NSGA-II and chance constrained programming. International Journal of Electrical Power & Energy Systems, 74. 187 - 194. ISSN 0142-0615

Kenisarin, Murat and Mahkamov, Khamid (2016) Passive thermal control in residential buildings using phase change materials. Renewable and Sustainable Energy Reviews, 55. pp. 371-398. ISSN 1364-0321

Kenisarin, Murat and Mahkamov, Khamid (2016) Salt hydrates as latent heat storage materials:Thermophysical properties and costs. Solar Energy Materials and Solar Cells, 145 (Part 3). pp. 255-286. ISSN 0927-0248

Khaled, M., Gad El Rab, M., Hachem, F., Elhage, H., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2016) Experimental study of the flow induced by a vehicle fan and the effect of engine blockage in a simplified model. International Journal of Automotive Technology, 17 (4). pp. 617-627. ISSN 1229-9138

Khan, Ahmed, Burluka, Alexey, Neumeister, Jens, OudeNijeweme, Dave, Freeland, Paul and Mitcalf, John (2016) Combustion and Autoignition Modelling in a Turbocharged SI Engine. SAE International Journal of Engines, 9 (4). pp. 2016-01. ISSN 1946-3944

Khan, Muhammad Waqas, Salman, Naveed, Kemp, Andrew and Mihaylova, Lyudmila (2016) Localisation of Sensor Nodes with Hybrid Measurements in Wireless Sensor Networks. Sensors, 16 (7). p. 1143. ISSN 1424-8220

Khodjal, M. A., Tadjine, Mohamed, Boucherit, M. S. and Busawon, Krishna (2016) Optimization of a proportional derivative (PD) fuzzy controller using the particle swarm optimization (PSO) technique for a 3DOF robot manipulator. The Mediterranean Journal of Measurement and Control, 12 (4). pp. 670-677. ISSN 1743-9310

Kolo, Shaba James, Rahimian, Farzad Pour and Goulding, Jack (2016) Offsite manufacturing in Nigeria: feasibility research and future directions. In: CIB World Building Congress 2016, 30th May - 3rd June 2016, Tampere, Finland.

L

Lanc, Domagoj, Turkalj, Goran, Vo, Thuc and Brnić, Josip (2016) Nonlinear buckling behaviours of thin-walled functionally graded open section beams. Composite Structures, 152. pp. 829-839. ISSN 0263-8223

Lei, Ming, Xu, Ben, Pei, Yu Tao, Lu, Haibao and Fu, Yong Qing (2016) Micro-mechanics of nanostructured carbon/shape memory polymer hybrid thin film. Soft Matter, 12. pp. 106-114. ISSN 1744-683X

Li, Jie, Fang, Liang, Luo, Hao, Khaliq, Jibran, Tang, Ying and Li, Chunchun (2016) Li4WO5: A temperature stable low-firing microwave dielectric ceramic with rock salt structure. Journal of the European Ceramic Society, 36 (1). 243 - 246. ISSN 0955-2219

Lilley, Sara, Davison, Gill, Gledson, Barry and Alwan, Zaid (2016) Analysing the technical and behavioural shifts of social housing tenants following the retrofitting of external wall insulation. In: Sustainable Ecological Engineering Design for Society: Selected Proceedings from the International Conference of Sustainable Ecological Engineering Design for Society (SEEDS). Springer, London, pp. 341-353. ISBN 978-3-319-32646-7

Ling, Haoshu, Chen, Chao, Qin, Hong, Wei, Shen, Lin, Jie, Li, Na, Zhang, Mingxing, Yu, Nan and Li, Yin (2016) Indicators evaluating thermal inertia performance of envelops with phase change material. Energy and Buildings, 122. pp. 175-184. ISSN 0378-7788

Liu, Dongdong, Tao, Zhi, Luo, Xiang, Kang, Wenwu, Wu, Hongwei and Yu, Xiao (2016) Investigation on the impact of protrusion parameter on the efficiency of converting additional windage loss for ingress alleviation in rotor-stator system. Journal of Engineering for Gas Turbine and Power, 138 (11). p. 112604. ISSN 0742-4795

Liu, Xianfeng, Buzzi, Olivier, Yuan, Shengyang, Mendes, Joao and Fityus, Stephen (2016) Multi-scale characterization of retention and shrinkage behaviour of four Australian clayey soils. Canadian Geotechnical Journal, 53 (5). pp. 854-870. ISSN 0008-3674

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Mahkamov, Khamid, Wu, Hongwei and Mirzaeian, Mojtaba (2016) Numerical Simulation of Sub-cooled Boiling Flow with Fouling Deposited Inside Channels. Applied Thermal Engineering, 103. pp. 434-442. ISSN 1359-4311

Liu, Yong, Luo, Jing Ting, Zhao, Chao, Zhou, Jian, Hassan, Sameer, Li, Yifan, Cooke, Michael, Wu, Qiang, Ng, Wai Pang, Du, Jiang Feng, Liu, Yang and Fu, Yong Qing (2016) Annealing effect on structural, functional and device properties of flexible ZnO acoustic wave sensors based on commercial available Al foil. IEEE Transactions on Electron Devices, 63 (11). pp. 4535-4541. ISSN 0018-9383

Lou, T. J., Greenwood, David and Rogage, Kay (2016) An investigation into “Lean-BIM” synergies in the UK Construction Industry. In: First International Conference of the BIM Academic Forum, 13-15 September 2016, Glasgow.

Lu, Haibao, Yin, Jinying, Xu, Ben, Gou, Jihua, Hui, David and Fu, Yong Qing (2016) Synergistic effects of carboxylic acid-functionalized carbon nanotube and nafion/silica nanofiber on electrical actuation efficiency of shape memory polymer nanocomposite. Composites Part B: Engineering, 100. pp. 146-151. ISSN 1359-8368

M

MacQuart, Terence, Maheri, Alireza and Busawon, Krishna (2016) A decoupling control strategy for wind turbine blades equipped with active flow controllers. Wind Energy, 20 (4). pp. 569-584. ISSN 1095-4244

Mallory, Adrian, Crapper, Martin, Gyasi, Samuel and Boamah, B. (2016) A socio-economic analysis of different approaches to faecal sludge treatment in Sunyani, Ghana. In: 39th WEDC International Conference: Ensuring Availability and Sustainable Management of Water and Sanitation for All, 11-15 July 2016, Kumasi, Ghana.

Mansour Abadi, Mojtaba, Ghassemlooy, Zabih, Bhatnagar, Manav, Zvanovec, Stanislav, Khalighi, Mohammad-Ali and Maheri, Alireza (2016) Using differential signalling to mitigate pointing errors effect in FSO communication link. In: IEEE International Conference on Communications Workshops (ICC), 23-27 May 2016, Kuala Lumpur.

Mehnert, Markus, Hossain, Mokarram and Steinmann, Paul (2016) On nonlinear thermo-electro-elasticity. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 472 (2190). p. 20160170. ISSN 1364-5021

Mendes, Joao, Gallipoli, Domenico, Boeck, Fabian, von Unold, Georg and Tarantino, Alessandro (2016) Building the UPPA high capacity tensiometer. E3S Web of Conferences, 9. p. 10001. ISSN 2267-1242

Mendes, Joao and Toll, D. G. (2016) Influence of Initial Water Content on the Mechanical Behavior of Unsaturated Sandy Clay Soil. International Journal of Geomechanics, 16 (6). D4016005. ISSN 1532-3641

Min, Shixiong, Rasul, Shahid, Li, Huaifeng, Grills, David C., Takanabe, Kazuhiro, Li, Lain-Jong and Huang, Kuo-Wei (2016) Electrocatalytic Reduction of Carbon Dioxide with a Well-Defined PN3 −Ru Pincer Complex. ChemPlusChem, 81 (2). pp. 166-171. ISSN 2192-6506

Missimer, Thomas M., Choon Ng, Kim, Thuw, Kyaw and Shahzad, Muhammad Wakil (2016) Geothermal electricity generation and desalination: an integrated process design to conserve latent heat with operational improvements. Desalination and Water Treatment, 57 (48-49). pp. 23110-23118. ISSN 1944-3994

Misti, Siti Nabilah (2016) Development of a precision trimming process for manganin shunt resistors. Doctoral thesis, Northumbria University.

Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2016) Experimental investigation into abrasive concurrent trimming for manganin shunt resistor. In: Proceedings of the 2nd International Conference on Advances in Mechanical Engineering Istanbul 2016. Yildiz Technical University, Istanbul, pp. 745-749. ISBN 9786056590719

Mozaffari, Amirpasha, Klotzsche, Anja, Guowei, He, Giannopoulos, Antonios, Warren, Craig, Vereecken, Harry and Van der Kruk, Jan (2016) 2.5 D Crosshole GPR Full-waveform Inversion. In: AGU Fall Meeting 2016, 12th - 16th December 2016, San Francisco, USA.

Mozaffari, Amirpasha, Klotzsche, Anja, He, Guowei, Vereecken, Harry, van der Kruk, Jan, Warren, Craig and Giannopoulos, Antonios (2016) Towards 3D full-waveform inversion of crosshole GPR data. In: GPR2016 - 16th International Conference on Ground Penetrating Radar, 13th - 16th June 2016, Hong Kong, China.

N

Nagaratnam, Brabha, Rahman, Muhammad, Mirasa, Abdul Karim, Mannan, Mohammad Abdul and Lame, Seyed Omid (2016) Workability and heat of hydration of self-compacting concrete incorporating agro-industrial waste. Journal of Cleaner Production, 112. pp. 882-894. ISSN 0959-6526

Nguyen, Hoang, Lee, Jaehong, Vo, Thuc and Lanc, Domagoj (2016) Vibration and lateral buckling optimisation of thin-walled laminated composite channel-section beams. Composite Structures, 143. pp. 84-92. ISSN 0263-8223

Nguyen, Trung-Kien, Nguyen, Van-Hau, Chau-Dinh, Thanh, Vo, Thuc and Nguyen-Xuan, H. (2016) Static and vibration analysis of isotropic and functionally graded sandwich plates using an edge-based MITC3 finite elements. Composites Part B: Engineering, 107. pp. 162-173. ISSN 1359-8368

Nguyen, Trung-Kien, Vo, Thuc, Nguyen, Ba-Duy and Lee, Jaehong (2016) An analytical solution for buckling and vibration analysis of functionally graded sandwich beams using a quasi-3D shear deformation theory. Composite Structures, 156. pp. 238-252. ISSN 0263-8223

O

Okolo, Chichi, Rutherford, Alan, Wood, Chris and Inam, Fawad (2016) Dynamic mechanical analyses for molecular level engineering of advanced subsea polymers. In: 3rd International Conference on Structural Nano Composites (NANOSTRUC 2016), 12-15 September, 2016, Aberdeen, UK.

Oppon, Charles (2016) An Investigation into the Characteristics of Polyurethane Foam for Medical Applications Produced Using Additive Manufacturing Technology. Doctoral thesis, Northumbria University.

Ozoemena, Chukwunonso Emmanuel (2016) Development of a Segemented Fractional Plan (SFP) to aid the implementation of Six Sigma in SMEs. Doctoral thesis, Northumbria University.

Ozoemena, Matthew (2016) Sustainability Assessment of Wind Turbine Design Variations: An Analysis of the Current Situation and Potential Technology Improvement Opportunities. Doctoral thesis, Northumbria University.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Fargani, Haitem (2016) A hybrid Stochastic Approach for Improving Uncertainty Analysis in the Design and Development of a Wind Turbine. Procedia CIRP, 56. pp. 19-24. ISSN 2212-8271

Ozoemena, Matthew, Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of technology improvement opportunities for a 1.5 MW wind turbine using a hybrid stochastic approach in life cycle assessment. Renewable Energy, 93. pp. 369-382. ISSN 0960-1481

P

Pajewski, Lara, Giannopoulos, Antonis, Lambot, Sébastien, Marciniak, Marian, Meschino, Simone, Pinel, Nicolas, Sbartai, Mehdi and Warren, Craig (2016) Short-Term Scientific Missions on electromagnetic modelling and inversion techniques for Ground Penetrating Radar-COST Action TU1208. In: EuCAP 2016 - 10th European Conference on Antennas and Propagation, 10th - 15th April 2016, Davos, Switzerland.

Pan, Song, Xu, Chuanqi, Wei, Shen, Hassan, Tarek, Xie, Lang, Xiong, Yingzi, Firth, Steven, Greenwood, David and de Wilde, Pieter (2016) Improper Window Use in Office Buildings: Findings from a Longitudinal Study in Beijing, China. Energy Procedia, 88. pp. 761-767. ISSN 1876-6102

Paramasivam, Sivajothi (2016) Investigating university-industry partnership of higher engineering education using cause-effect analysis and multi-criteria decision making: A Malaysian perspective. Doctoral thesis, Northumbria University.

Patacas, João, Dawood, Nashwan, Greenwood, David and Kassem, Mohamad (2016) Supporting building owners and facility managers in the validation and visualisation of asset information models (AIM) through open standards and open technologies. Journal of Information Technology in Construction, 21. pp. 434-455. ISSN 1874-4753

Paul, Gordon, Rezaienia, Amin, Shen, Xiang, Avital, Eldad and Korakianitis, Theodosios (2016) Slip and turbulence phenomena in journal bearings with application to implantable rotary blood pumps. Tribology International, 104. pp. 157-165. ISSN 0301-679X

Poologanathan, Keerthan and Mahendran, Mahen (2016) Shear tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 121. pp. 330-340. ISSN 0143-974X

R

Rahimian, Farzad Pour, Goulding, Jack, Holt, Giles and Matuszewski, B. (2016) Advanced intelligent agents for optimised dynamic process monitoring and defect inspection in construction projects. In: CIB World Building Congress 2016, 30th May - 3rd June 2016, Tampere, Finland.

Rahma, Elsiddig (2016) The impact of oil price shocks on an oil exporting country: A mixed methods approach. Doctoral thesis, Northumbria University.

Rahma, Elsiddig, Perera, Noel and Tan, Kian (2016) Impact of Oil Price Shocks on Sudan’s Government Budget. International Journal of Energy Economics and Policy, 6 (2). pp. 243-248. ISSN 2146-4553

Rahma, Elsiddig, Perera, Noel and Tan, Kian (2016) Oil price shocks and Sudan’s current account. In: 4th IBESRA Conference 2016, 27-28 February 2016, Istanbul.

Rahma, Elsiddig, Perera, Noel and Tan, Kian (2016) Oil price shocks and their consequences on Sudan's GDP growth and unemployment rates. In: 21st International Academic Conference, 9 -12 February 2016, Miami.

Rahman, Mohammed and Mahkamov, Khamid (2016) Performance Analysis of Multi-Layer Thermoelectric Generators to be Used in a Thermoelectric Generator-Stirling Engine Hybrid System. In: Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition: November 13-19, 2015, Houston, Texas, USA. Volume 6 Energy A. ASME, New York, NY, USA, V06AT07A039. ISBN 9780791857434

Rahmati, Mohammad (2016) Comparison of frequency domain and time-domain methods for aeromechanical analysis. International Journal of Rotating Machinery, 2016. p. 4293414. ISSN 1023-621X

Rahmati, Mohammad and Aggidis, G. A. (2016) Numerical and experimental analysis of the power output of a point absorber wave energy converter in irregular waves. Ocean Engineering, 111. pp. 483-492. ISSN 0029-8018

Rahmati, Mohammad, Bahai, Hamid and Alfano, Giulio (2016) An accurate and computationally efficient small-scale nonlinear FEA of flexible risers. Ocean Engineering, 121. pp. 382-391. ISSN 0029-8018

Rasheed, Aatif (2016) Multi-Layer-Graphene-Nanoclay-Epoxy Nanocomposites – Theory and Experimentation. Doctoral thesis, Northumbria University.

Richardson, Alan (2016) Fibre use in concrete - including novel fibres that use the poison ratio to a positive effect for bond strength. In: BITs 2nd Annual World Congress of Smart Materials, 4-6 March 2016, Singapore.

Richardson, Alan (2016) Self Healing concrete. [Broadcast]

Richardson, Alan, Coventry, Kathryn, Edmondson, Vikki and Dias, Eli (2016) Crumb rubber used in concrete to provide freeze-thaw protection (OPTIMAL particle size). Journal of Cleaner Production, 112 (1). pp. 599-606. ISSN 0959-6526

Richardson, Alan, Coventry, Kathryn, Lamb, Thomas and Mackenzie, David (2016) The addition of synthetic fibres to concrete to improve impact/ballistic toughness. Construction and Building Materials, 121. pp. 612-621. ISSN 0950-0618

Richardson, Alan, Coventry, Kathryn and Pasley, Jack (2016) Micro-induced Calcite Precipitation: Crack Sealing Application. In: 9th International Concrete Conference, 4th - 6th July 2016, Dundee, UK.

Richardson, Alan, Coventry, Kathryn and Pasley, Jack (2016) Микробиологическое осаждение кальцита: применение для залечивания трещин (Microbiological deposition of calcite: crack sealing applications). Цемент И ЕГО ПРИМЕНЕНИЕ (Cement and its Application). ISSN 1607-8837

Richardson, Alan and Ovington, Rhys (2016) Performance of fibre concrete with regard to temperature. Concrete, 50 (09). pp. 37-39.

Righetti, Luca, Borri, Antonio and Corradi, Marco (2016) Sustainable Strengthening Techniques for Masonry Structures. In: Cinpar 2016 - XII International Conference on Structural Repair and Rehabilitation, 26th - 29th October 2016, Porto, Portugal.

Righetti, Luca, Corradi, Marco and Borri, Antonio (2016) Shear resistance of screwed timber connections with parallel to grain FRP reinforcements. In: World Conference on Timber Engineering, August 22-25, 2016, Vienna, Austria.

Righetti, Luca, Corradi, Marco, Borri, Antonio, Castori, Giulio, Sisti, Romina and Osofero, Israel (2016) Durability of GFRP grids for masonry structures. International Journal of Forensic Engineering, 3 (1-2). pp. 164-179. ISSN 1744-9952

Righetti, Luca, Edmondson, Vikki, Corradi, Marco and Borri, Antonio (2016) Behaviour of small masonry assemblages reinforced with a steel cord reinforced joint repointing. In: 16th International Conference on Structural Faults and Repair, 17-19 May 2016, Edinburgh.

S

Saha, Bidyut Baran, El-Sharkawy, Ibrahim I., Shahzad, Muhammad Wakil, Thu, Kyaw, Ang, Li and Ng, Kim Choon (2016) Fundamental and application aspects of adsorption cooling and desalination. Applied Thermal Engineering, 97. pp. 68-76. ISSN 1359-4311

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay–polyester nanocomposites exposed to diluted methanol. Journal of Composite Materials, 51 (11). pp. 1653-1664. ISSN 1530-793X

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) Viscoelastic and Mechanical Properties of Multi-layered Graphene Polyester Composites. In: ICAME2016 - 2nd International Conference on Advances in Mechanical Engineering, 10th - 13th May 2016, Istanbul, Turkey.

Saharudin, Mohd, Shyha, Islam and Inam, Fawad (2016) The effect of methanol exposure on the flexural and tensile properties of halloysite nanoclay/polyester. International Journal of Advances in Science Engineering and Technology, 4 (1*). pp. 42-46. ISSN 2321-9009

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2016) The degradation of mechanical properties in halloysite nanoclay-polyester nanocomposites exposed in seawater environment. Journal of Nanomaterials (JNM), 2016. p. 2604631. ISSN 1687-4110

Salah, Romil (2016) The influence of national culture on the practice of project management: A study of information and communication technology projects in Saudi Arabia. Doctoral thesis, Northumbria University.

Salehifar, Mehdi, Moreno-Eguilaz, Manuel, Putrus, Ghanim and Barras, Peter (2016) Simplified fault tolerant finite control set model predictive control of a five-phase inverter supplying BLDC motor in electric vehicle drive. Electric Power Systems Research, 132. pp. 56-66. ISSN 0378-7796

Sanchez Vicente, Yolanda, Alonso-Pastor, Oscar, Pando, Concepción and Cabañas, Albertina (2016) Phase behaviour of the two binary systems formed by CO2 and the silane precursors N-[3-(trimethoxysilyl)propyl]aniline or (3-mercaptopropyl)trimethoxysilane. The Journal of Chemical Thermodynamics, 103. pp. 152-156. ISSN 0021-9614

Sgrigna, G., Baldacchini, C., Esposito, R., Calandrelli, R., Tiwary, Abhishek and Calfapietra, C. (2016) Characterization of leaf-level particulate matter for an industrial city using electron microscopy and X-ray microanalysis. Science of the Total Environment, 548-49. pp. 91-99. ISSN 0048-9697

Sheikh, Muhammad, Elmarakbi, Ahmed, Baglee, David and Knowles, Michael (2016) Model for heat generation estimation in electric vehicle battery under mechanical load condition. In: 36th FISITA World Automotive Congress, 2016, 26th - 30th September 2016, Busan, Korea.

Shen, Xiang, Avital, Eldad, Paul, Gordon, Rezaienia, Mohammad Amin, Wen, Pihua and Korakianitis, Theodosios (2016) Experimental study of surface curvature effects on aerodynamic performance of a low Reynolds number airfoil for use in small wind turbines. Journal of Renewable and Sustainable Energy, 8 (5). 053303. ISSN 1941-7012

Shenashen, Mohamed A., Hassen, Diab, El-Safty, Sherif A., Selim, Mahmoud M., Akhtar, Naeem, Chatterjee, Abhijit and Elmarakbi, Ahmed (2016) Mesoscopic Fabric Sheet Racks and Blocks as Catalysts with Efficiently Exposed Surfaces for Methanol and Ethanol Electrooxidation. Advanced Materials Interfaces, 3 (24). p. 1600743. ISSN 2196-7350

Shyha, Islam, Richardson, Alan, Coventry, Kathryn and Ponton, Hazel (2016) Mould release technologies with regard to concrete surface finish. Magazine of Concrete Research, 68 (2). pp. 87-98. ISSN 0024-9831

Shyha, Islam and Rudd, Mark (2016) Electro-discharge machining of metal matrix composite materials. Advances in Materials and Processing Technologies, 2 (2). pp. 235-244. ISSN 2374-068X

Siahaan, Ropalin, Mahendran, Mahen and Poologanathan, Keerthan (2016) Section moment capacity tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 125. pp. 252-262. ISSN 0143-974X

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2016) Finite element modeling of rivet fastened rectangular hollow flange channel beams subject to local buckling. Engineering Structures, 126. pp. 311-327. ISSN 0141-0296

Simons, Philippa and Cheung, Wai Ming (2016) Development of a Quantitative Analysis System for Greener and Economically Sustainable Wind Farms. Journal of Cleaner Production, 133. pp. 886-898. ISSN 0959-6526

Singh, Dharminder, McGlinchey, Don and Crapper, Martin (2016) Breakage Functions of Particles of Four Different Materials Subjected to Uniaxial Compression. Particulate Science and Technology, 34 (4). pp. 494-501. ISSN 0272-6351

Sisti, Romina, Corradi, Marco and Borri, Antonio (2016) An experimental study on the influence of composite materials used to reinforce masonry ring beams. Construction and Building Materials, 122. pp. 231-241. ISSN 0950-0618

Speranzini, Emanuela, Agnetti, Stefano and Corradi, Marco (2016) Experimental analysis of adhesion phenomena in fibre-reinforced glass structures. Composites Part B: Engineering, 101. pp. 155-166. ISSN 1359-8368

Steau, Edward, Mahendran, Mahen and Poologanathan, Keerthan (2016) Web crippling tests of rivet fastened rectangular hollow flange channel beams under two-flange load cases. In: Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, SDSS 2016. European Convention for Constructional Steelwork, pp. 411-418. ISBN 9789291471331

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2016) Experimental Studies of Lipped Channel Beams Subject to Web Crippling under Two-Flange Load Cases. Journal of Structural Engineering, 142 (9). 04016058. ISSN 0733-9445

T

Taghavifar, Hamid, Motlagh, Asad Modarres, Mardani, Aref, Hassanpour, Ali, Hosseinloo, Ashkan Haji, Taghavifar, Leyla and Wei, Chongfeng (2016) APPRAISAL OF TAKAGI–SUGENO TYPE NEURO-FUZZY NETWORK SYSTEM WITH A MODIFIED DIFFERENTIAL EVOLUTION METHOD TO PREDICT NONLINEAR WHEEL DYNAMICS CAUSED BY ROAD IRREGULARITIES. TRANSPORT, 31 (2). pp. 211-220. ISSN 1648-4142

Tait, Michael W. and Cheung, Wai Ming (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349

Tarantino, Alessandro, Gallipoli, Domenico, Jommi, Cristina, Mendes, Joao, Capotosto, Anastasia, Amabile, Alessia, Pedrotti, Matteo, Pozzato, Annarita, Beneš, Vojtěch, Bottaro, Fabio, Denzer, Heiner and Boeck, Fabian (2016) Advances in the monitoring of geo-structure subjected to climate loading. E3S Web of Conferences, 9. 04001. ISSN 2267-1242

Tarfaoui, M., Lafdi, Khalid and El Moumen, A. (2016) Mechanical properties of carbon nanotubes based polymer composites. Composites Part B: Engineering, 103. pp. 113-121. ISSN 1359-8368

Tiwary, Abhishek, Williams, Ian, Heidrich, Oliver, Namdeo, Anil, Bandaru, Varaprasad and Calfapietra, Carlo (2016) Development of multi-functional streetscape green infrastructure using a performance index approach. Environmental Pollution, 208 (Part A). pp. 209-220. ISSN 0269-7491

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2016) Concrete strains under transient thermal conditions: A state-of-the-art review. Engineering Structures, 127. pp. 172-188. ISSN 0141-0296

Trinh, Luan, Nguyen, Hoang, Vo, Thuc and Nguyen, Trung-Kien (2016) Size-dependent behaviour of functionally graded microbeams using various shear deformation theories based on the modified couple stress theory. Composite Structures, 154. pp. 556-572. ISSN 0263-8223

Trinh, Luan, Vo, Thuc, Osofero, Israel and Lee, Jaehong (2016) Fundamental frequency analysis of functionally graded sandwich beams based on the state space approach. Composite Structures, 156. pp. 263-275. ISSN 1879 1085

Trinh, Luan, Vo, Thuc, Thai, Huu-Tai and Nguyen, Trung-Kien (2016) An analytical method for the vibration and buckling of functionally graded beams under mechanical and thermal loads. Composites Part B: Engineering, 100. pp. 152-163. ISSN 1359-8368

Tziviloglou, Eirini, Wiktor, Virginie, Wang, Jianyun, Paine, Kevin, Alazhari, Mohamed, Richardson, Alan, Gueguen, Marielle, De Belie, Nele, Schlangen, Erik and Jonkers, Henk (2016) Evaluation of experimental methodology to asses the sealing efficiency of bacteria based self healing concrete: Round robin test. In: International RILEM Conference on Microorganisms-Cementitious Materials Interactions. RILEM PRO (102). RILEM Publications SARL, Paris, pp. 156-170. ISBN 9782351581605

U

Uguru-Okorie, Daniel, Dare, Ademola and Burluka, Alexey (2016) Effect of Supercharging on Cycle-To-Cycle Variation in a Two-Stroke Spark Ignition Engine. SAE Technical Papers. pp. 2016-01. ISSN 0148-7191

Underwood, Chris (2016) Heat pump modelling. In: Advances in Ground-Source Heat Pump Systems. Elsevier, Duxford, pp. 387-421. ISBN 978-0-08-100311-4

V

Villapún Puzas, Victor Manuel, Dover, Lynn, Cross, Andrew and Gonzalez Sanchez, Sergio (2016) Antibacterial Metallic Touch Surfaces. Materials, 9 (9). p. 736. ISSN 1996-1944

W

Wang, Chao, Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Yang, Bo (2016) A two-dimensional splashing model for investigating impingement characteristics of Supercooled Large Droplets. International Journal of Multiphase Flow, 80. pp. 131-149. ISSN 0301-9322

Wang, Dan, Xiang, Huaicheng, Tang, Ying, Fang, Liang, Khaliq, Jibran and Li, Chunchun (2016) A low-firing Ca5Ni4(VO4)6 ceramic with tunable microwave dielectric properties and chemical compatibility with Ag. Ceramics International, 42 (13). 15094 - 15098. ISSN 0272-8842

Warren, Craig and Giannopoulos, Antonios (2016) Experimental and modeled performance of a ground penetrating radar antenna in lossy dielectrics. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 9 (1). pp. 29-36. ISSN 1939-1404

Warren, Craig and Giannopoulos, Antonios (2016) Influence of lossless and lossy, heterogeneous environments on Ground Penetrating Radar antenna behaviour. In: MMS 2015 - IEEE 15th Mediterranean Microwave Symposium, 30th November - 2nd December 2015, Lecce, Italy.

Warren, Craig, Giannopoulos, Antonios and Giannakis, Iraklis (2016) gprMax: Open source software to simulate electromagnetic wave propagation for ground penetrating radar. Computer Physics Communications, 209. pp. 163-170. ISSN 0010-4655

Warren, Craig, Pajewski, Lara, Poljak, Dragan, Ventura, Alessio, Giannopoulos, Antonios and Šesnić, Silvestar (2016) A comparison of finite-difference, finite-integration, and integral-equation methods in the time-domain for modelling ground penetrating radar antennas. In: GPR2016 - 16th International Conference on Ground Penetrating Radar, 13th - 16th June 2016, Hong Kong, China.

Warren, Craig, Pajewski, Lara, Ventura, Alessio and Giannopoulos, Antonios (2016) An evaluation of Finite-Difference and Finite-Integration Time-Domain modelling tools for Ground Penetrating Radar antennas. In: EuCAP 2016 - 10th European Conference on Antennas and Propagation, 10th - 15th April 2016, Davos, Switzerland.

Wei, Chongfeng and Olatunbosun, Oluremi Ayotunde (2016) The effects of tyre material and structure properties on relaxation length using finite element method. Materials & Design, 102. pp. 14-20. ISSN 0264-1275

Wei, Chongfeng and Yang, Xiaoguang (2016) Static tire properties analysis and static parameters derivation to characterising tire model using experimental and numerical solutions. Journal of Advances in Vehicle Engineering, 24 (1). pp. 1-20. ISSN 2423-7345

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Processing of epoxy/ graphene nanocomposites. In: 6th Chemical Nanoscience Symposium (CNSN-6), 17 March 2016, Newcastle upon Tyne.

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2016) Reinforcement effect of graphene on the mechanical properties of epoxy. In: BIT's 5th Annual World Congress of Advanced Materials-2016 (WCAM-2016), 6th - 8th June, 2016, Chongqing.

Wei, W., Gonzalez Sanchez, Sergio, Hashimoto, Teruo, Abuaisha, R. R., Thompson, George and Zhou, Xiaorong (2016) In-service sensitization of a microstructurally heterogeneous AA5083 alloy. Materials and Corrosion, 67 (4). pp. 378-386. ISSN 0947 5117

Wei, W., Gonzalez Sanchez, Sergio, Hashimoto, Teruo, Prasath Babu, R., Thompson, George and Zhou, Xiaorong (2016) Effect of low temperature sensitization on the susceptibility to intergranular corrosion in AA5083 aluminum alloy. Materials and Corrosion, 67 (4). pp. 331-339. ISSN 0947-5117

Weise, Matthias, Liebich, Thomas, Nisbet, Nicholas and Benghi, Claudio (2016) IFC model checking based on mvdXML 1.1. In: 11th European Conference on Product & Process Modeling, CPPM, 7 - 9 September 2016, Limassol, Cyprus.

X

Xie, Chunli, Elmarakbi, Ahmed, Liu, Yongkuo and Zhang, Jizhou (2016) A dynamic ordered concept lattice based algorithm for early diagnosis of NPP faults. Progress in Nuclear Energy, 92. pp. 22-28. ISSN 0149-1970

Xing, Lei, Cai, Qiong, Xiaoteng, Liu, Liu, Chunbo, Scott, Keith and Yan, Yongsheng (2016) Anode partial flooding modelling of proton exchange membrane fuel cells: Optimisation of electrode properties and channel geometries. Chemical Engineering Science, 146. pp. 88-103. ISSN 0009-2509

Xu, Ben (2016) Electrochemically Triggered Buckling of Hydrogel Films on Micropatterned Electrodes. In: 15th European Mechanics of Materials Conference (EMMC15), 7th - 9th September 2016, Brussels, Belgium.

Xu, Ben (2016) Smart materials and technologies for future engineering. In: Newton Researcher Links Workshop on Energy and Environment, July 8-10 2016, Xi'an, China.

Xu, Ben (2016) A new microfluidic switch technique by controllably buckling Stimuli-responsive polyelectrolyte hydrogel thin layer. In: Polymer Networks Group meeting, 19th - 23rd June 2016, Stockholm.

Xu, Ben, Liu, Qihan, Suo, Zhigang and Hayward, Ryan (2016) Reversible Electrochemically Triggered Delamination Blistering of Hydrogel Films on Micropatterned Electrodes. Advanced Functional Materials, 26 (19). pp. 3218-3225. ISSN 1616-301X

Y

Yuan, Tianzhi, Jiang, Yinzhu, Sun, Wenping, Bo, Xiang, Li, Yong, Yan, Mi, Xu, Ben and Dou, Shixue (2016) Ever-Increasing Pseudocapacitance in RGO–MnO–RGO Sandwich Nanostructures for Ultrahigh-Rate Lithium Storage. Advanced Functional Materials, 26 (13). pp. 2198-2206. ISSN 1616-301X

Z

Zhu, Jianqin, Wang, Kai, Li, Guoqing, Wu, Hongwei, Jiang, Zhaowu, Lin, Feng and Li, Yongliang (2016) Experimental Study of the Energy and Exergy performance for a Pressurized Volumetric Solar Receiver. Applied Thermal Engineering, 104. pp. 212-221. ISSN 1359-4311

This list was generated on Thu Nov 26 03:34:37 2020 UTC.