Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2017

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2017) A Mixed Method Approach to Investigate the Lack of Lean Manufacturing Implementation in Libya. International Journal of Technology and Engineering Studies, 3 (3). pp. 111-116. ISSN 2414-0924

Abduelmula, Mohamed, Birkett, Martin and Connor, Chris (2017) A Quantitative Study of the Barriers to Lean Manufacturing Implementation in Libya. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering . IOS Press, pp. 315-320. ISBN 978-1-61499-791-7

Abdulla, Kurdo F., Cunningham, Lee S. and Gillie, Martin (2017) Simulating masonry wall behaviour using a simplified micro-model approach. Engineering Structures, 151. pp. 349-365. ISSN 0141-0296

Al-Janabi, Darkam (2017) An investigation into the relationship between organisational culture and maintenance implementation in Iraqi power plants. Doctoral thesis, Northumbria University.

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2017) Effects of varying laser trimming geometries on thin film resistors. Circuit World, 43 (1). pp. 27-31. ISSN 0305-6120

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2017) An investigation into the effects of pattern geometries on laser trimmed film resistors. In: Proceedings of the 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 79-82. ISBN 978-1-4673-9053-8

Alam, Asifa, Tabinda, Amtul Bari, Qadir, Abdul, Butt, Talib E., Siddique, Sidra and Mahmood, Adeel (2017) Ecological risk assessment of an open dumping site at Mehmood Booti Lahore, Pakistan. Environmental Science and Pollution Research, 24 (21). pp. 17889-17899. ISSN 0944-1344

Altaee, Mohammed, Cunningham, Lee S. and Gillie, Martin (2017) Experimental investigation of CFRP-strengthened steel beams with web openings. Journal of Constructional Steel Research, 138. pp. 750-760. ISSN 0143-974X

Anthony, Catherine and Cheung, Wai Ming (2017) Cost Evaluation in Design for End-of-Life of Automotive Components. Journal of Remanufacturing, 7 (1). pp. 97-111. ISSN 2210-464X

Ariyanayagam, Anthony, Poologanathan, Keerthan and Mahendran, Mahen (2017) Thermal modelling of load bearing cold-formed steel frame walls under realistic design fire conditions. Advanced Steel Construction, 13 (2). pp. 160-189. ISSN 1816-112X

Asgari, Zeynab and Rahimian, Farzad Pour (2017) Advanced Virtual Reality Applications and Intelligent Agents for Construction Process Optimisation and Defect Prevention. Procedia Engineering, 196. pp. 1130-1137. ISSN 1877-7058

Atif, Rasheed and Inam, Fawad (2017) Fractography analysis of 1.0 wt% nanoclay/multi-layer graphene reinforced epoxy nanocomposites. Journal of Composite Materials, 51 (23). pp. 3281-3290. ISSN 0021-9983

Atif, Rasheed and Inam, Fawad (2017) Influence of macro-topography on mechanical performance of 1.0 wt% nanoclay/multi-layer graphene-epoxy nanocomposites. Journal of Composite Materials, 51 (19). pp. 2769-2778. ISSN 0021-9983

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Azimov, Ulugbek and Birkett, Martin (2017) Feasibility study and design of an ocean wave power generation station integrated with a decommissioned offshore oil platform in UK waters. International Journal of Energy and Environment, 8 (2). pp. 161-174. ISSN ISSN 2076-2909

Azimov, Ulugbek and Patil, Saurabh (2017) CFD analysis of gas turbine combustor with vortex generator. International Journal of Energy and Environment, 8 (5). pp. 389-404. ISSN 2076-2895

Azimov, Ulugbek, Stylianidis, Nearchos, Kawahara, Nobuyuki and Tomita, Eiji (2017) Characterisation of DME-HCCI combustion cycles for formaldehyde and hydroxyl UV–vis absorption. Fuel, 210. pp. 578-591. ISSN 0016-2361

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Constitutive modelling of ductile damage matrix reinforced by platelets-like particles with imperfect interfaces: Application to graphene polymer nanocomposite materials. Composites Part B: Engineering, 113. pp. 55-64. ISSN 1359-8368

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Multiscale modelling of graphene platelets-based nanocomposite materials. Composite Structures, 168. pp. 313-321. ISSN 0263-8223

Azoti, Wiyao, Elmarakbi, Ahmed, Hage, Hisham El and Elkady, Mustafa (2017) Elasto-plastic response of graphene nanoplatelets reinforced polymer composite materials. International Journal of Automotive Composites, 3 (2/3/4). pp. 226-236. ISSN 2051-8218

Balaji, P.S., Moussa, Leblouba, Khandoker, Noman, Shyh, Ting Yuk, Rahman, Muhammad and Ho, Lau Hieng (2017) Experimental study on vertical static stiffnesses of polycal wire rope isolators. IoP Conference Series, Materials Science and Engineering, 217. 012032. ISSN 1757-8981

Bayati, Maryam and Scott, Keith (2017) Secondary Impact of Manganese on the Catalytic Properties of Nitrogen-Doped Graphene in the Hydrogen Evolution Reaction. ChemCatChem, 9 (21). pp. 4049-4052. ISSN 1867-3880

Bibi, Atiqa, Maqsood, Adnan, Sherbaz, Salma and Dala, Laurent (2017) Drag reduction of supersonic blunt bodies using opposing jet and nozzle geometric variations. Aerospace Science and Technology, 69. pp. 244-256. ISSN 1270-9638

Bortot, Eliana (2017) Analysis of multilayer electro-active spherical balloons. Journal of the Mechanics and Physics of Solids, 101. pp. 250-267. ISSN 0022-5096

Bortot, Eliana and Shmuel, Gal (2017) Tuning sound with soft dielectrics. Smart Materials and Structures, 26 (4). 045028. ISSN 0964-1726

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2017) Effect of stabilisation on mechanical properties, moisture buffering and water durability of hypercompacted earth. Construction and Building Materials, 149. pp. 733-740. ISSN 0950-0618

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2017) Mechanical behaviour of hypercompacted earth for building construction. Materials and Structures, 50 (2). p. 160. ISSN 1359-5997

Burluka, Alexey, Gaughan, R. G., Griffiths, J. F., Mandilas, C., Sheppard, C. G. and Woolley, R. (2017) Experimental observations on the influence of hydrogen atoms diffusion on laminar and turbulent premixed burning velocities. Fuel, 189. pp. 66-78. ISSN 0016-2361

Butt, Talib E., Alam, A., Gouda, H. M., Paul, P. and Mair, N. (2017) Baseline study and risk analysis of landfill leachate - Current state-of-the-science of computer aided approaches. Science of the Total Environment, 580. pp. 130-135. ISSN 0048-9697

Butt, Talib E., Gouda, A. A., Alam, A., Javadi, A. A., Nunns, M. A. and Allen, T. J. (2017) Baseline study in environmental risk assessment: Escalating need for computer models to be whole-system approach. Critical Reviews in Environmental Science and Technology, 47 (5). pp. 289-313. ISSN 1064-3389

Calabrese, Lara, Micelli, Francesco, Corradi, Marco, Aiello, Maria Antonietta and Borri, Antonio (2017) Ageing and Fatigue Combined Effects on GFRP Grids. Key Engineering Materials, 747. pp. 525-532. ISSN 1662-9795

Castori, Giulio, Borri, Antonio, De Maria, Alessandro, Corradi, Marco and Sisti, Romina (2017) Seismic vulnerability assessment of a monumental masonry building. Engineering Structures, 136. pp. 454-465. ISSN 0141-0296

Chan, Lydia, Shyha, Islam, Dreyer, Dale, Hamilton, John and Hackney, Philip (2017) Process Optimisation for Internal Cylindrical Rough Turning of Nickel Alloy 625 Weld Overlay. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 11 (4).

Chen, Longfei, Zhang, Zhichao, Lu, Yiji, Zhang, Chi, Zhang, Xin, Zhang, Cuiqi and Roskilly, Anthony Paul (2017) Experimental study of the gaseous and particulate matter emissions from a gas turbine combustor burning butyl butyrate and ethanol blends. Applied Energy, 195. pp. 693-701. ISSN 0306-2619

Chen, Mengdong, Xie, Yongqi, Wu, Hongwei, Shi, Shang and Yu, Jianzu (2017) Modeling solubility of nitrogen in clean fire extinguishing agent by Peng-Robinson equation of state and a correlation of Henry’s law constants. Applied Thermal Engineering, 110. pp. 457-468. ISSN 1359-4311

Chen, Mingming, Blacklock, Matthew, Zhang, Daxu and Gong, Jinghai (2017) Effects of stochastic tow waviness on stiffness and strength of plain-weave ceramic matrix composites. Advances in Mechanical Engineering, 9 (8). p. 168781401772797. ISSN 1687-8140

Chen, Xue and Meguid, S. A. (2017) Nonlinear vibration analysis of a microbeam subject to electrostatic force. Acta Mechanica, 228 (4). pp. 1343-1361. ISSN 0001-5970

Cheung, Wai Ming, Leong, Jun and Vichare, Parag (2017) Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products. Journal of Cleaner Production, 167. pp. 759-775. ISSN 0959-6526

Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2017) Quadrotors trajectory tracking using a differential flatness-quaternion based approach. In: Proceedings of the 2017 7th International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO). IEEE. ISBN 9781509054541

Combrinck, Madeleine, Dala, Laurent and Lipatov, Igor (2017) Eulerian derivation of non-inertial Navier–Stokes and boundary layer equations for incompressible flow in constant pure rotation. European Journal of Mechanics - B/Fluids, 65. pp. 10-30. ISSN 0997-7546

Combrinck, Madeleine, Dala, Laurent and Lipatov, Igor (2017) Non-inertial forces in aero-ballistic flow and boundary layer equations. R&D Journal of the South African Institution of Mechanical Engineering, 33. pp. 85-96. ISSN 0257-9669

Corradi, Marco, Borri, Antonio, Poverello, Elena and Castori, Giulio (2017) The Use of Transverse Connectors as Reinforcement of Multi-leaf Walls. Materials and Structures, 50. p. 114. ISSN 1359-5997

Corradi, Marco, Borri, Antonio, Righetti, Luca and Speranzini, Emanuela (2017) Uncertainty analysis of FRP reinforced timber beams. Composites Part B Engineering, 113. pp. 174-184. ISSN 1359-8368

Deng, Yangbo, Wu, Hongwei and Su, Fengmin (2017) Combustion and exhaust emission characteristics of low swirl injector. Applied Thermal Engineering, 110. pp. 171-180. ISSN 1359-4311

Ebrahim, Hesham, Dominy, Robert and Leung, Ken (2017) Evaluation of vehicle platooning aerodynamics using bluff body wake generators and CFD. In: 2016 International Conference for Students on Applied Engineering (ISCAE): Newcastle upon Tyne, United Kingdom, 20–21 October 2016. IEEE, Piscataway, NJ, pp. 218-223. ISBN 9781467390286, 9781467390538

Ebrahimi, Mohammadreza and Crapper, Martin (2017) CFD-DEM Simulation of Turbulence Modulation in Horizontal Pneumatic Conveying. Particuology, 31. pp. 15-24. ISSN 1674-2001

Edmondson, Vikki, Sherratt, Fred, Roff, Richard and Levett, Andy (2017) Advancing tunnelling: recognising a UK engineering legacy. Proceedings of the Institution of Civil Engineers - Forensic Engineering, 170 (4). pp. 191-199. ISSN 2043-9903

El Hasadi, Yousef and Crapper, Martin (2017) Self – Propelled Nanofluids a Path to a highly Effective Coolant. Applied Thermal Engineering, 127. pp. 857-869. ISSN 1359-4311

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2017) Mechanical characterization of carbon nanotubes based polymer composites using indentation tests. Composites Part B: Engineering, 114. pp. 1-7. ISSN 1359-8368

El Moumen, A., Tarfaoui, M., Lafdi, Khalid and Benyahia, H. (2017) Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact. Composites Part B: Engineering, 125. pp. 1-8. ISSN 1359-8368

Elkady, Mustafa, Elmarakbi, Ahmed, MacIntyre, John and Al Hariri, Mohammad (2017) Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems. Journal of Traffic and Transportation Engineering (English Edition), 4 (1). pp. 41-60. ISSN 2095-7564

Elmarakbi, Ahmed, Azoti, Wiyao and Serry, Mohamed (2017) Multiscale modelling of hybrid glass fibres reinforced graphene platelets polyamide PA6 matrix composites for crashworthiness applications. Applied Materials Today, 6. pp. 1-8. ISSN 2352-9407

UNIVERSITY OF SUNDERLAND, NATIONAL INSTITUTE FOR MATERIALS SCIENCE (2017) Electrodes. WO2017/168126.

Etaig, Saleh (2017) Investigation of the enhancement of convective heat transfer for wall-bounded flows utilizing nanofluids. Doctoral thesis, Northumbria University.

Etaig, Saleh, Hasan, Reaz, Perera, Noel and Ramadan, Ahmed (2017) Flow characteristics and heat transfer performance of Magnesium Oxide-Water nanofluid in the entrance region in circular cross-section microchannel. In: International Symposium on Advances in Computational Heat Transfer ICHMT, 28th May - 1st June 2017, Napoli, Italy.

Etaig, Saleh, Hasan, Reaz, Perera, Noel and Ramadan, Ahmed (2017) Investigation of the effect of Brownian motion on the flow characteristics in natural convection using different nanofluids. In: CHT-17 - ICHMT International Symposium on Advances in Computational Heat Transfer, 28th May - 1st June 2017, Napoli, Italy.

Faheem, Malik (2017) Autonomous vehicles: Safety, sustainability, and fuel efficiency. i-manager’s Journal on Future Engineering and Technology, 12 (4). pp. 1-7. ISSN 0973-2632

Fargani, Haitem (2017) A framework incorporating lean six sigma and life-cycle assessment in sustainable manufacturing. Doctoral thesis, Northumbria University.

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2017) A Proposed Implementation Process for a Sustainable Manufacturing Framework. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 365-370. ISBN 978-1-61499-791-7

Farokhi, Hamed and Ghayesh, Mergen H. (2017) Electrically actuated MEMS resonators: Effects of fringing field and viscoelasticity. Mechanical Systems and Signal Processing, 95. pp. 345-362. ISSN 0888-3270

Farokhi, Hamed and Ghayesh, Mergen H. (2017) Nonlinear resonant response of imperfect extensible Timoshenko microbeams. International Journal of Mechanics and Materials in Design, 13 (1). pp. 43-55. ISSN 1569-1713

Farokhi, Hamed and Ghayesh, Mergen H. (2017) Nonlinear thermo-mechanical behaviour of MEMS resonators. Microsystem Technologies, 23 (12). pp. 5303-5315. ISSN 0946-7076

Farokhi, Hamed and Ghayesh, Mergen H. (2017) Viscoelasticity effects on resonant response of a shear deformable extensible microbeam. Nonlinear Dynamics, 87 (1). pp. 391-406. ISSN 0924-090X

Farokhi, Hamed, Ghayesh, Mergen H. and Gholipour, Alireza (2017) Dynamics of functionally graded micro-cantilevers. International Journal of Engineering Science, 115. pp. 117-130. ISSN 0020-7225

Farokhi, Hamed, Ghayesh, Mergen H., Gholipour, Alireza and Hussain, Shahid (2017) Motion characteristics of bilayered extensible Timoshenko microbeams. International Journal of Engineering Science, 112. pp. 1-17. ISSN 0020-7225

Farokhi, Hamed, Ghayesh, Mergen H., Gholipour, Alireza and Tavallaeinejad, Mohammad (2017) Nonlinear oscillations of viscoelastic microplates. International Journal of Engineering Science, 118. pp. 56-69. ISSN 0020-7225

Farokhi, Hamed, Misra, Arun K. and Païdoussis, Michael P. (2017) A new electrostatic load model for initially curved carbon nanotube resonators: pull-in characteristics and nonlinear resonant behaviour. Nonlinear Dynamics, 88 (2). pp. 1187-1211. ISSN 0924-090X

Feng, Huijuan, Chen, Yan, Dai, Jian S. and Gogu, Grigore (2017) Kinematic study of the general plane-symmetric Bricard linkage and its bifurcation variations. Mechanism and Machine Theory, 116. pp. 89-104. ISSN 0094-114X

Gallipoli, Domenico, Bruno, Agostino Walter, Perlot, Céline and Mendes, Joao (2017) A geotechnical perspective of raw earth building. Acta Geotechnica, 12 (3). pp. 463-478. ISSN 1861-1125

Gargano, A., Pingkarawat, K., Blacklock, Matthew, Pickerd, V. and Mouritz, A. P. (2017) Comparative assessment of the explosive blast performance of carbon and glass fibre-polymer composites used in naval ship structures. Composite Structures, 171. pp. 306-316. ISSN 0263-8223

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Gariani, Salah, Shyha, Islam, Jackson, Connor and Inam, Fawad (2017) Tool Life Analysis When Turning Ti-6Al-4V Using Vegetable oil-based Cutting Fluid. In: Manufacturing Sciences and Technologies VII. Materials Science Forum (882). Trans Tech Publications, pp. 36-40. ISBN 9783038357322

Geraldi, Nicasio, Dodd, Linzi, Xu, Ben, Wells, Gary, Wood, David, Newton, Michael and McHale, Glen (2017) Drag reduction properties of superhydrophobic mesh pipes. Surface Topography: Metrology and Properties, 5. p. 34001. ISSN 2051-672X

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Bistable nonlinear response of MEMS resonators. Nonlinear Dynamics, 90 (3). pp. 1627-1645. ISSN 0924-090X

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Global dynamics of imperfect axially forced microbeams. International Journal of Engineering Science, 115. pp. 102-116. ISSN 0020-7225

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Nonlinear mechanics of doubly curved shallow microshells. International Journal of Engineering Science, 119. pp. 288-304. ISSN 0020-7225

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Parametric vibrations of imperfect Timoshenko microbeams. Microsystem Technologies, 23 (10). pp. 4917-4929. ISSN 0946-7076

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Size-dependent large-amplitude oscillations of microcantilevers. Microsystem Technologies, 23 (8). pp. 3477-3488. ISSN 0946-7076

Ghayesh, Mergen H. and Farokhi, Hamed (2017) Viscoelastically coupled size-dependent behaviour of imperfect extensible microbeams. International Journal of Mechanics and Materials in Design, 13 (4). pp. 569-581. ISSN 1569-1713

Ghayesh, Mergen H., Farokhi, Hamed and Gholipour, Alireza (2017) Coupled vibrations of functionally graded Timoshenko microbeams. European Journal of Mechanics - A/Solids, 65. pp. 289-300. ISSN 0997-7538

Ghayesh, Mergen H., Farokhi, Hamed and Gholipour, Alireza (2017) Large-amplitude dynamics of a functionally graded microcantilever with an intermediate spring-support and a point-mass. Acta Mechanica, 228 (12). pp. 4309-4323. ISSN 0001-5970

Ghayesh, Mergen H., Farokhi, Hamed and Gholipour, Alireza (2017) Oscillations of functionally graded microbeams. International Journal of Engineering Science, 110. pp. 35-53. ISSN 0020-7225

Ghayesh, Mergen H., Farokhi, Hamed and Gholipour, Alireza (2017) Vibration analysis of geometrically imperfect three-layered shear-deformable microbeams. International Journal of Mechanical Sciences, 122. pp. 370-383. ISSN 0020-7403

Ghayesh, Mergen H., Farokhi, Hamed, Gholipour, Alireza and Hussain, Shahid (2017) Complex motion characteristics of three-layered Timoshenko microarches. Microsystem Technologies, 23 (8). pp. 3731-3744. ISSN 0946-7076

Ghayesh, Mergen H., Farokhi, Hamed, Gholipour, Alireza and Hussain, Shahid (2017) On the nonlinear mechanics of layered microcantilevers. International Journal of Engineering Science, 120. pp. 1-14. ISSN 0020-7225

Ghayesh, Mergen H., Farokhi, Hamed, Gholipour, Alireza, Hussain, Shahid and Arjomandi, Maziar (2017) Resonance Responses of Geometrically Imperfect Functionally Graded Extensible Microbeams. Journal of Computational and Nonlinear Dynamics, 12 (5). 051002. ISSN 1555-1415

Ghayesh, Mergen H., Farokhi, Hamed, Gholipour, Alireza and Tavallaeinejad, Mohammad (2017) Dynamic characterisation of functionally graded imperfect Kirchhoff microplates. Composite Structures, 179. pp. 720-731. ISSN 0263-8223

Ghayesh, Mergen H., Farokhi, Hamed, Gholipour, Alireza and Tavallaeinejad, Mohammad (2017) Nonlinear bending and forced vibrations of axially functionally graded tapered microbeams. International Journal of Engineering Science, 120. pp. 51-62. ISSN 0020-7225

Ghayesh, Mergen H., Farokhi, Hamed, Hussain, Shahid, Gholipour, Alireza and Arjomandi, Maziar (2017) A size-dependent nonlinear third-order shear-deformable dynamic model for a microplate on an elastic medium. Microsystem Technologies, 23 (8). pp. 3281-3299. ISSN 0946-7076

Giannopoulos, Antonios and Warren, Craig (2017) Foreword of IWAGPR2017 - the 9th International Workshop on Advanced Ground Penetrating Radar. In: 2017 9th International Workshop on Advanced Ground Penetrating Radar (IWAGPR). IEEE. ISBN 978-1-5090-5485-5

Gillie, Martin, Dahli, Ranim, Saunders, Fiona C and Gibson, Andrew (2017) Use of rich-media resources by engineering undergraduates. European Journal of Engineering Education, 42 (6). pp. 1496-1511. ISSN 0304-3797

Giubileo, F., Iemmo, L., Luongo, G., Martucciello, N., Raimondo, M., Guadagno, L., Passacantando, M., Lafdi, Khalid and Di Bartolomeo, A. (2017) Transport and field emission properties of buckypapers obtained from aligned carbon nanotubes. Journal of Materials Science, 52 (11). pp. 6459-6468. ISSN 0022-2461

Gledson, Barry (2017) Innovation Diffusion Within the UK Construction Sector : a study of the adoption of 4D BIM. Doctoral thesis, Northumbria University.

Gledson, Barry and Dawson, Susan (2017) Use of Simulation Through BIM-Enabled Virtual Projects to Enhance Learning and Soft Employability Skills in Architectural Technology Education. In: Building Information Modelling, Building Performance, Design and Smart Construction. Springer, Switzerland, pp. 79-92. ISBN 9783319503455

Gledson, Barry and Downs, Maddy (2017) Examining vignettes in AEC research – how are they used, and what are they good for? In: 3rd International Sustainable Ecological Engineering Design for Society (SEEDS) Conference, 13th -14th September 2017, Leeds.

Gledson, Barry and Greenwood, David (2017) The adoption of 4D BIM in the UK construction industry: An Innovation Diffusion approach. Engineering, Construction and Architectural Management, 24 (6). pp. 950-967. ISSN 0969-9988

Gledson, Barry and Phoenix, Calum (2017) Exploring organisational attributes affecting the innovativeness of UK SMEs. Construction Innovation: Information, Process, Management, 17 (2). pp. 224-243. ISSN 1471-4175

Greenwood, David (2017) Building Information Modelling and Management. In: Advances in Construction ICT and e-Business. Taylor & Francis, Abingdon, pp. 87-105. ISBN 9781138914582

Greenwood, David (2017) Building information modelling and management. Taylor & Francis, Abingdon, pp. 87-105. ISBN 9781138914582

Greenwood, David, Lou, Thai and Rogage, Kay (2017) An Investigation into 'Lean-BIM' Synergies in the UK Construction Industry. International Journal of 3-D Information Modelling, 6 (2). pp. 1-13. ISSN 2156-1710

Guadagno, Liberata, Naddeo, Carlo, Raimondo, Marialuigia, Barra, Giuseppina, Vertuccio, Luigi, Russo, Salvatore, Lafdi, Khalid, Tucci, Vincenzo, Spinelli, Giovanni and Lamberti, Patrizia (2017) Influence of carbon nanoparticles/epoxy matrix interaction on mechanical, electrical and transport properties of structural advanced materials. Nanotechnology, 28 (9). 094001. ISSN 0957-4484

Guan, Jian, Ruiz Gutierrez, Elfego, Xu, Ben, Wood, David, McHale, Glen, Ledesma-Aguilar, Rodrigo and Wells, Gary (2017) Drop transport and positioning on lubricant-impregnated surfaces. Soft Matter, 13 (18). pp. 3404-3410. ISSN 1744-683X

Hackney, Philip and Wooldridge, Richard (2017) 3D Sand Printing for Automotive Mass Production Applications. International Journal of Rapid Manufacturing, 6 (3). pp. 134-154. ISSN 1757-8817

Hackney, Philip and Wooldridge, Richard (2017) Characterisation of direct 3D sand printing process for the production of sand cast mould tools. Rapid Prototyping Journal, 23 (1). pp. 7-15. ISSN 1355-2546

Hackney, Philip, Wooldridge, Richard and Connor, Chris (2017) Optimisation of Additive Manufactured Sand Printed Mould Material for Aluminium Castings. Procedia Manufacturing, 11. pp. 457-465. ISSN 2351-9789

He, Yecong, Tan, Min and Tan, John (2017) Physical, chemical and biological characteristics of dust accumulation in HVAC system. Chemical Engineering Transactions, 59. pp. 757-762. ISSN 2283-9216

Hodzic, Erdzan, Jangi, Mehdi, Szasz, Robert-Zoltan and Bai, Xue-Song (2017) Large eddy simulation of bluff body flames close to blow-off using an Eulerian stochastic field method. Combustion and Flame, 181. pp. 1-15. ISSN 0010-2180

Hore, Alan, McAuley, Barry, West, Roger, Kassem, Mohamad and Kuang, Shiyao (2017) Ireland’s BIM Macro Adoption Study: Establishing Ireland’s BIM Maturity. In: CitA BIM Gathering Conference 2017. The Construction IT Alliance, pp. 32-40. ISBN 397809573957-2-6

Hossin, Khaled (2017) Dynamic modelling and thermo-economic optimization of a small-scale hybrid solar/biomass organic rankine cycle power system. Doctoral thesis, Northumbria University.

Howarth, Tim and Greenwood, David (2017) Construction Quality Management: Principles and Practice [2nd ed.]. Taylor & Francis, Abingdon. ISBN 9781138680104

Imran, Mohamed, Poologanathan, Keerthan and Mahendran, Mahen (2017) Fire performance of CFRP strengthened cold-formed steel tubular columns. In: Applications of Fire Engineering. CRC Press, pp. 11-18. ISBN 9781315107202

Inam, Fawad, Okolo, Chichi, Vo, Thuc and Iqbal, Sadia Sagar (2017) Engineering properties of graphene - ceramic nanocomposites by incorporating defects in graphene. In: WCSM-2017 - 3rd Annual World Congress of Smart Materials-2017, 16th - 18th March, 2017, Bangkok, Thailand.

Jangi, Mehdi and Dlugogorski, Bogdan (2017) On wall fire interaction in a small pool fire: A large-eddy simulation study. Fire Safety Journal, 92. pp. 199-209. ISSN 0379-7112

Kahwash, Fadi (2017) Element-free galerkin modelling for cutting of fibre reinforced plastics. Doctoral thesis, Northumbria University.

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) An Investigation into the Dependency of Cutting Forces on the Volume Fraction and Fibre Orientation during Machining Composite Materials. Materials Science Forum, 882. pp. 61-65. ISSN 1662-9752

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2017) Meshfree formulation for modelling of orthogonal cutting of composites. Composite Structures, 166. pp. 193-201. ISSN 0263-8223

Kassem, Mohamad (2017) Claims, Disputes and Litigation Involving BIM [Book review]. Construction Economics and Building, 17 (3). p. 124. ISSN 2204-9029

Kassem, Mohamad, Benomran, Leila and Teizer, Jochen (2017) Virtual environments for safety learning in construction and engineering: seeking evidence and identifying gaps for future research. Visualization in Engineering, 5 (1). p. 16. ISSN 2213-7459

Kassem, Mohamad and Succar, Bilal (2017) Macro BIM adoption: Comparative market analysis. Automation in Construction. ISSN 0926-5805

Ke, Jie, Suleiman, Norhidayah, Sanchez Vicente, Yolanda, Murphy, Thomas S., Rodriguez, Javier, Ramos, Alfredo, Poliakoff, Martyn and George, Michael W. (2017) The phase equilibrium and density studies of the ternary mixtures of CO2 + Ar + N2 and CO2 + Ar + H2, systems relevance to CCS technology. International Journal of Greenhouse Gas Control, 56. pp. 55-66. ISSN 1750-5836

Khajenoori, Leila, Wright, Grant and Crapper, Martin (2017) Simulating Geobag Revement Failure Processes. In: 37th IAHR World Congress, 13th - 18th August 2017, Kuala Lumpur, Malaysia.

Khaliq, Jibran, Deutz, Daniella Bayle, Frescas, Jesus Alfonso Caraveo, Vollenberg, Peter, Hoeks, Theo, van der Zwaag, Sybrand and Groen, Pim (2017) Effect of the piezoelectric ceramic filler dielectric constant on the piezoelectric properties of PZT-epoxy composites. Ceramics International, 43 (2). pp. 2774-2779. ISSN 0272-8842

Khan, Muhammad Nauman, Jelani, Nadeem, Li, Chunchun and Khaliq, Jibran (2017) Flexible and low cost lead free composites with high dielectric constant. Ceramics International, 43 (4). 3923 - 3926. ISSN 0272-8842

Knyazkov, D. A., Shvartsberg, V. M., Dmitriev, A. M., Osipova, K. N., Shmakov, A. G., Korobeinichev, O. P. and Burluka, Alexey (2017) Combustion chemistry of ternary blends of hydrogen and C1–C4 hydrocarbons at atmospheric pressure. Combustion, Explosion, and Shock Waves, 53 (5). pp. 491-499. ISSN 0010-5082

LeBono, Jerome, Barton, Lewis and Birkett, Martin (2017) Low temperature tensile lap-shear testing of adhesively bonded polyethylene pipe. International Journal of Adhesion & Adhesives, 74. pp. 57-63. ISSN 0143-7496

Leong, Jun and Cheung, Wai Ming (2017) Cross-Functional Mapping to Link Lean Manufacturing and Life Cycle Assessment in Environmental Impact Reduction. In: Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies, 68 . Springer, London, pp. 421-431. ISBN 9783319570778

Li, Haiwang, Huang, Haoran, Xu, Guoqiang, Wen, Jie and Wu, Hongwei (2017) Performance analysis of a novel compact air-air heat exchanger for aircraft gas turbine engine using LMTD method. Applied Thermal Engineering, 116. pp. 445-455. ISSN 1359-4311

Li, Yifan, Wang, Ding, Richardson, Jack and Xu, Ben (2017) Responsive Hydrogels Based Lens Structure with Configurable Focal Length for Intraocular Lens (IOLs) Application. Macromolecular Symposia, 372 (1). pp. 127-131. ISSN 1022-1360

Lim, Michael, Hogg, Michelle, Westoby, Matt, Pound, Matthew, Dunlop, Lesley and Woodward, John (2017) Coastal road asset management: Dealing with uncertainty using quantitative erosion monitoring and modelling. In: Coasts, Marine Structures and Breakwaters Conference: Realising the Potential, 5-7 September 2017, Liverpool.

Liu, Chang and Lafdi, Khalid (2017) Fabrication and characterization of carbon nanofibers from polyacrylonitrile/pitch blends. Journal of Applied Polymer Science, 134 (42). p. 45388. ISSN 0021-8995

Liu, Yingzhi, Lu, Haibao, Xu, Ben, Hui, David and Fu, Yong Qing (2017) Spontaneous biaxial pattern generation and autonomous wetting switching on the surface of gold/shape memory polystyrene bilayer. Composites Part B: Engineering, 122. pp. 9-15. ISSN 1359-8368

Lockley, Steve, Benghi, Claudio and Cerny, Martin (2017) Xbim.Essentials: a library for interoperable building information applications. The Journal of Open Source Software, 2 (20). p. 473. ISSN 2475-9066

Lopez, Isbelis, Leung, Ken, Inam, Fawad, Till, Clare and Paulsen, Andreas (2017) Mechanical characterization of protective coatings for offshore wind turbine towers and transition pieces. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 303-307. ISBN 978-1-4673-9028-6

Maduka, Nnamdi Stanley (2017) The Role of Knowledge Management in Assisting Key Stakeholders in Making Informed Decisions in Delivering Sustainable Retrofitted Building Projects. Doctoral thesis, Northumbria University.

Malik, Faheem (2017) Sustainable Parking. International Journal of Engineering Development and Research, 5 (2). pp. 10-14. ISSN 2321-9939

Malik, Faheem, Jabbar, Shah Faisal Saleh Faisal Farooq Rather Malik Jasif and Rashid, Inam ul haq Wani Shahid Mushtaq Shah Farooz (2017) Road Accidents and Prevention. International Journal of Engineering Development and Research, 5 (2). pp. 40-46. ISSN 2321-9939

McLaggan, Martyn S., Hadden, Rory M. and Gillie, Martin (2017) Flammability assessment of phase change material wall lining and insulation materials with different weight fractions. Energy and Buildings, 153. pp. 439-447. ISSN 0378-7788

Meijer, Marius-Corné and Dala, Laurent (2017) Quantifying non-linearity in planar supersonic potential flows. The Aeronautical Journal, 121 (1237). pp. 372-394. ISSN 0001-9240

Meng, Han, Galland, M.A., Ichchou, M., Bareille, O., Xin, F.X. and Lu, T.J. (2017) Small perforations in corrugated sandwich panel significantly enhance low frequency sound absorption and transmission loss. Composite Structures, 182. pp. 1-11. ISSN 0263-8223

Micelli, Francesco, Corradi, Marco, Aiello, Maria and Borri, Antonio (2017) Properties of Aged GFRP Reinforcement Grids Related to Fatigue Life and Alkaline Environment. Applied Sciences, 7 (9). p. 897. ISSN 2076-3417

Misti, Nabilah, Birkett, Martin, Penlington, Roger and Bell, David (2017) Effect of Abrasive Machining on the Electrical Properties Cu86Mn12Ni2 Alloy Shunts. Materials, 10 (8). p. 876. ISSN 1996-1944

Naylor, Andrew, Huo, Dehong, Hackney, Philip and Perera, Noel (2017) Operational performance of individual handsaw teeth. In: 23rd International Wood Machining Seminar, 28th-31st May 2017, Warsaw, Poland.

Newbon, Joshua, Sims-Williams, David and Dominy, Robert (2017) Aerodynamic Analysis of Grand Prix Cars Operating in Wake Flows. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 318-329. ISSN 1946-4002

Ng, Kim Choon, Shahzad, Muhammad Wakil, Son, Hyuk Soo and Hamed, Osman A. (2017) An exergy approach to efficiency evaluation of desalination. Applied Physics Letters, 110 (18). p. 184101. ISSN 0003-6951

Nguyen, Hoang, Nguyen, Tuan, Abdel-Wahab, M., Bordas, S. P. A., Nguyen-Xuan, H. and Vo, Thuc (2017) A refined quasi-3D isogeometric analysis for functionally graded microplates based on the modified couple stress theory. Computer Methods in Applied Mechanics and Engineering, 313. pp. 904-940. ISSN 0045-7825

Nguyen, Trung-Kien, Nguyen, Ba-Duy, Vo, Thuc and Thai, Huu-Tai (2017) Hygro-thermal effects on vibration and thermal buckling behaviours of functionally graded beams. Composite Structures, 176. pp. 1050-1060. ISSN 0263-8223

Nguyen, Trung-Kien, Nguyen, Ngoc-Duong, Vo, Thuc and Thai, Huu-Tai (2017) Trigonometric-series solution for analysis of laminated composite beams. Composite Structures, 160. pp. 142-151. ISSN 0263-8223

Nguyen, Vinh, Greenwood, David and Ginige, Kanchana (2017) Challenges in integrating disaster risk reduction into the built environment – The Vietnam context. In: 7th International Conference on Building Resilience; Using scientific knowledge to inform policy and practice in disaster risk reduction (ICBR2017), 27-29 November 2017, Bangkok.

Okolo, Chichi and Inam, Fawad (2017) Advanced nanocomposite materials for subsea oil & gas production. In: Applied Nanotechnology and Nanoscience International Conference 2017, 18-20 October, 2017, Rome, Italy.

Okolo, Chichi and Inam, Fawad (2017) Fullerene based polymeric nanocomposites for advanced oil/gas subsea applications. In: AMPE 2017 - 2nd International Conference on Advanced Materials and Process Engineering, 12th - 13th December 2017, Karachi, Pakistan.

Omoware, Wisdom (2017) Wind Turbine Blades Made of Functional Materials. Doctoral thesis, Northumbria University.

Oppon, Charles and Hackney, Philip (2017) Building of Polyurethane Foams Structures Using Additive Manufacturing Technology. In: RDPM 2017 - Rapid Design, Prototyping and Manufacturing Conference, 27th -28th April 2017, Newcastle, UK.

Padwick, Annie, Davenport, Carol, Strachan, Rebecca and Shimwell, Joe (2017) The NUSTEM Approach: Tackling the Engineering and Gender Challenge Together from Early Years to Sixth Form and beyond. In: IET/EPC Conference: New Approaches to Engineering in Higher Education, 22nd May 2017, London, UK.

Pajewski, Lara, Giannopoulos, Antonios, Marciniak, Marian, Meschino, Simone, Popov, Alexei, Prokopovich, Igor, Ventura, Alessio and Warren, Craig (2017) Short-term scientific missions on forward and inverse electromagnetic-scattering techniques for ground penetrating radar. In: ACES 2017 - Applied Computational Electromagnetics Society Symposium, 26th - 30th March 2017, Firenze, Italy.

Pajewski, Lara, Giannopoulos, Antonios, Warren, Craig, Antonijevic, Sinisa, Doric, Vicko, Poljak, Dragan and Pirrone, Daniele (2017) Development of electromagnetic simulators for Ground Penetrating Radar. In: ACES 2017 - Applied Computational Electromagnetics Society Symposium, 26th - 30th March 2017, Firenze, Italy.

Pajewski, Lara, Warren, Craig, Giannopoulos, Antonios, Lambot, Sébastien, Pirrone, Daniele, Randazzo, Andrea, Sesnic, Silvestar, Benedetto, Francesco and Economou, Nikos (2017) Electromagnetic modelling, inversion, imaging and data-processing techniques for Ground Penetrating Radar: main results achieved by Working Group 3 of COST Action TU1208. In: Bearing Capacity of Roads, Railways & Airfields, 10th International Conference on, 28-30 June 2017, Athens.

Papp, Bence, Donno, Daniela, Martin, James and Hartog, Arthur (2017) A study of the geophysical response of distributed fibre optic acoustic sensors through laboratory-scale experiments. Geophysical Prospecting, 65 (5). pp. 1186-1204. ISSN 0016-8025

Perera, Noel, Hasan, Reaz and Etaig, Saleh (2017) The Investigation of Heat Transfer Performance and Fluid Flow Characteristics of Titanium Oxide-Water Nanofluid in a Shell and Tube Heat Exchanger with Inclined Baffles. In: International Research Conference on Sustainable Energy, Engineering, Materials and Environment (SEEME), 26-28 July 2017, Newcastle upon Tyne.

Pok, Y.W., Sujan, D., Rahman, Muhammad and Dol, S.S. (2017) Effect of Bond Layer Properties to Thermo-Mechanical Stresses in Flip Chip Packaging. In: 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016). MATEC Web of Conferences Volume 95 (2017), 95 . EDP Sciences, Paris, 01003. ISBN 9781510836921

Pupsys, Tomas, Corradi, Marco, Borri, Antonio and Amess, Leon (2017) Bending Reinforcement of Full-Scale Timber Beams with Mechanically Attached GFRP Composite Plates. Key Engineering Materials, 747. pp. 212-219. ISSN 1662-9795

Rahimian, Farzad Pour, Goulding, Jack and Arciszewski, Tomasz (2017) Successful education of professionals for supporting future BIM implementation within the architecture engineering construction context. In: Online Learning for STEM Subjects: International Examples of Technologies and Pedagogies in Use. Taylor & Francis, pp. 143-163. ISBN 9781138934443

Rahmati, Mohammad, Norouzi, Shayan, Bahai, Hamid and Alfano, Giulio (2017) Experimental and numerical study of structural behavior of a flexible riser model. Applied Ocean Research, 67. pp. 162-168. ISSN 0141-1187

Ramadan, Ahmed Mohamed (2017) Investigation of flow and heat transfer in a large-scale spent nuclear fuel cooling pond. Doctoral thesis, Northumbria University.

Rasul, Shahid, Alazmi, A., Jaouen, K., Hedhili, M.N. and Costa, P.M.F.J. (2017) Rational design of reduced graphene oxide for superior performance of supercapacitor electrodes. Carbon, 111. pp. 774-781. ISSN 0008-6223

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2017) Genetic Algorithm–Simulation Framework for Decision Making in Construction Site Layout Planning. Journal of Construction Engineering and Management, 143 (1). 04016084. ISSN 0733-9364

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2017) Site Layout and Construction Plan Optimization Using an Integrated Genetic Algorithm Simulation Framework. Journal of Computing in Civil Engineering, 31 (4). 04017011. ISSN 0887-3801

Richardson, Alan, Amess, Leon, Neville, Simon and Walton, Christopher (2017) Crack healing utilising bacterial spores in concrete. Journal of Green Building, 12 (3). pp. 103-114. ISSN 1552-6100

Richardson, Alan, Heniegal, Ashraf and Tindall, Jess (2017) Optimal performance characteristics of mortar incorporating phase change materials and silica fume. Journal of Green Building, 12 (2). pp. 59-78. ISSN 1552-6100

Richardson, Alan and Ovington, Rhys (2017) Performance of fibre concrete with regard to temperature. In: CoMS 2017: 1st International Conference on Construction Materials for Sustainable Future, 19th – 21st April 2017, Zadar, Croatia.

Richardson, Alan and Ovington, Rhys (2017) Temperature related steel and synthetic fibre concrete performance. Construction and Building Materials, 153. pp. 616-621. ISSN 0950-0618

Rodriguez-Trejo, Sergio, Ahmad, Ahmad Mohammad, Hafeez, Mian Atif, Dawood, Huda, Vukovic, Vladimir, Kassem, Mohamad, Naji, Khalid and Dawood, Nashwan (2017) Hierarchy based information requirements for sustainable operations of buildings in Qatar. Sustainable Cities and Society, 32. pp. 435-448. ISSN 2210-6707

Romano, Vittorio, Naddeo, Carlo, Vertuccio, Luigi, Lafdi, Khalid and Guadagno, Liberata (2017) Experimental evaluation and modeling of thermal conductivity of tetrafunctional epoxy resin containing different carbon nanostructures. Polymer Engineering & Science, 57 (7). pp. 779-786. ISSN 0032-3888

Ruggeri, Francesca, Crapper, Martin, Snyder, Riley and Crow, Jim (2017) A GIS-based assessment of the Byzantine water supply system of Constantinople. Water Science and Technology : Water Supply, 17 (6). pp. 1534-1543. ISSN 1606-9749

Rusthi, Mohamed, Ariyanayagam, Anthony, Mahendran, Mahen and Poologanathan, Keerthan (2017) Fire tests of Magnesium Oxide board lined light gauge steel frame wall systems. Fire Safety Journal, 90. pp. 15-27. ISSN 0379-7112

Rusthi, Mohamed, Poologanathan, Keerthan, Mahendran, Mahen and Ariyanayagam, Anthony (2017) Investigating the fire performance of LSF wall systems using finite element analyses. Journal of Structural Fire Engineering, 8 (4). pp. 354-376. ISSN 2040-2317

Saharudin, Mohd (2017) Mechanical properties of polyester nano-composites exposed to liquid media. Doctoral thesis, Northumbria University.

Saharudin, Mohd, Atif, Rasheed and Inam, Fawad (2017) Effect of short-term water exposure on the mechanical properties of halloysite nanotube-multi layer graphene reinforced polyester nanocomposites. Polymers, 9 (1). p. 27. ISSN 2073-4360

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Biodegradation of Halloysite Nanotubes-Polyester Nanocomposites Exposed to Short Term Seawater Immersion. Polymers, 9 (8). p. 314. ISSN 2073-4360

Saharudin, Mohd, Wei, Jiacheng, Shyha, Islam and Inam, Fawad (2017) Environmental stress cracking resistance of halloysite nanoclay-polyester nanocomposites. World Journal of Engineering and Technology, 5 (3). pp. 389-403. ISSN 2331-4249

Salama, Ashraf M., Remali, Adel M. and Rahimian, Farzad Pour (2017) A decade of architectural and urban research published in 'Archnet-IJAR: International Journal of Architectural Research'. International Journal of Architectural Research: ArchNet-IJAR, 11 (1). pp. 6-28. ISSN 1938-7806

Schoombie, Janine, Tuling, Sean and Dala, Laurent (2017) Experimental and computational analysis of a tangent ogive slender body at incompressible speeds. Aerospace Science and Technology, 69. pp. 474-484. ISSN 1270-9638

Selim, Mohamed S., Shenashen, M.A., El-Safty, Sherif A., Higazy, S.A., Selim, Mahmoud M., Isago, H. and Elmarakbi, Ahmed (2017) Recent progress in marine foul-release polymeric nanocomposite coatings. Progress in Materials Science, 87. pp. 1-32. ISSN 0079-6425

Selim, Mohamed S., Shenashen, Mohamed A., Elmarakbi, Ahmed, EL-Saeed, Ashraf M., Selim, Mahmoud M. and El-Safty, Sherif A. (2017) Sunflower oil-based hyperbranched alkyd/spherical ZnO nanocomposite modeling for mechanical and anticorrosive applications. RSC Advances, 7 (35). pp. 21796-21808. ISSN 2046-2069

Selim, Mohamed S., Shenashen, Mohamed A., Elmarakbi, Ahmed, Fatthallah, Nesreen A., Hasegawa, Shin-ichi and El- Safty, Sherif A. (2017) Synthesis of ultrahydrophobic and thermally stable inorganic–organic nanocomposites for self-cleaning foul release coatings. Chemical Engineering Journal, 320. pp. 653-666. ISSN 1385-8947

Selim, Mohamed S., Shenashen, Mohamed A., Fatthallah, Nesreen A., Elmarakbi, Ahmed and El-Safty, Sherif A. (2017) In Situ Fabrication of One-Dimensional-Based Lotus-Like Silicone/ϒ-Al2 O3 Nanocomposites for Marine Fouling Release Coatings. ChemistrySelect, 2 (30). pp. 9691-9700. ISSN 2365-6549

Seyedzadeh, Saleh, Rahimian, Farzad Pour, Glesk, Ivan and Kakaee, Majid H. (2017) Variable weight spectral amplitude coding for multiservice OCDMA networks. Optical Fiber Technology, 37. pp. 53-60. ISSN 1068-5200

Shahzad, Muhammad Wakil, Burhan, Muhammad, Ang, Li and Ng, Kim Choon (2017) Energy-water-environment nexus underpinning future desalination sustainability. Desalination, 413. pp. 52-64. ISSN 0011-9164

Shariff, M. H. B. M., Bustamante, Roger, Hossain, Mokarram and Steinmann, Paul (2017) A novel spectral formulation for transversely isotropic magneto-elasticity. Mathematics and Mechanics of Solids, 22 (5). pp. 1158-1176. ISSN 1081-2865

Sheikh, Muhammad, Elmarakbi, Ahmed and Elkady, Mustafa (2017) Thermal runaway detection of cylindrical 18650 lithium-ion battery under quasi-static loading conditions. Journal of Power Sources, 370. pp. 61-70. ISSN 0378-7753

Shen, Xiang, Avital, Eldad, Rezaienia, Mohammad Amin, Paul, Gordon and Korakianitis, Theodosios (2017) Computational methods for investigation of surface curvature effects on airfoil boundary layer behavior. Journal of Algorithms & Computational Technology, 11 (1). pp. 68-82. ISSN 1748-3018

Shen, Xiang, Avital, Eldad, Zhao, Qinghe, Gao, Junhui, Li, Xiaodong, Paul, Gordon and Korakianitis, Theodosios (2017) Surface curvature effects on the tonal noise performance of a low Reynolds number aerofoil. Applied Acoustics, 125. pp. 34-40. ISSN 0003-682X

Shenashen, Mohamed A., Hassen, Diab, El-Safty, Sherif A., Isago, Hiroaki, Elmarakbi, Ahmed and Yamaguchi, Hitoshi (2017) Axially oriented tubercle vein and X-crossed sheet of N-Co3O4@C hierarchical mesoarchitectures as potential heterogeneous catalysts for methanol oxidation reaction. Chemical Engineering Journal, 313. pp. 83-98. ISSN 1385-8947

Shinde, Avinash and Birkett, Martin (2017) A Numerical and Experimental Study of Carbon Fibre Riveted Splice Joints. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 433-438. ISBN 978-1-61499-791-7

Islam Shyha (2017) Composite machining tool. WO2017098242A1.

Sparkes, Bradley, Dunning, Stuart, Lim, Michael and Winter, Mike G. (2017) Characterisation of Recent Debris Flow Activity at the Rest and Be Thankful, Scotland. In: Advancing Culture of Living with Landslides. Springer, pp. 51-58. ISBN 9783319534824

Steau, Edward, Poologanathan, Keerthan and Mahendran, Mahen (2017) Web crippling study of rivet fastened rectangular hollow flange channel beams with flanges fastened to supports. Advances in Structural Engineering, 20 (7). pp. 1059-1073. ISSN 1369-4332

Strzelecki, Mateusz, Kasprzak, Marek, Lim, Michael, Swirad, Zuzanna, Jaskólski, Marek, Pawłowski, Łukasz and Modzel, P. (2017) Cryo-conditioned rocky coast systems: A case study from Wilczekodden, Svalbard. Science of the Total Environment, 607. pp. 443-453. ISSN 0048-9697

Stylianidis, Nearchos, Azimov, Ulugbek, Kawahara, Nobuyuki and Tomita, Eiji (2017) Chemical Kinetics and Computational Fluid-Dynamics Analysis of H2/CO/CO2/CH4 Syngas Combustion and NOx Formation in a Micro-Pilot-Ignited Supercharged Dual Fuel Engine. SAE Technical Papers. pp. 2017-24. ISSN 0148-7191

Stylianidis, Nearchos, Azimov, Ulugbek, Maheri, Alireza, Tomita, Eiji and Kawahara, Nobuyuki (2017) Chemical kinetics and CFD analysis of supercharged micro-pilot ignited dual-fuel engine combustion of syngas. Fuel, 203. pp. 591-606. ISSN 0016-2361

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2017) New design rules for lipped channel beams subject to web crippling under two-flange load cases. Thin-Walled Structures, 119. pp. 421-437. ISSN 0263-8231

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2017) Web crippling experiments of high strength lipped channel beams under one-flange loading. Journal of Constructional Steel Research, 138. pp. 851-866. ISSN 0143-974X

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2017) Web crippling studies of SupaCee sections under two flange load cases. Engineering Structures, 153. pp. 582-597. ISSN 0141-0296

Tan, Xian and Azimov, Ulugbek (2017) Diesel engine downsizing with application of biofuels. International Journal of Energy and Environment, 8 (5). pp. 413-426. ISSN 2076-2895

Tang, Yufan, Ren, Shuwei, Meng, Han, Xin, Fengxian, Huang, Lixi, Chen, Tianning, Zhang, Chuanzeng and Lu, Tian Jian (2017) Hybrid acoustic metamaterial as super absorber for broadband low-frequency sound. Scientific Reports, 7 (1). ISSN 2045-2322

Tarfaoui, M., El Moumen, A. and Lafdi, Khalid (2017) Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites. Composites Part B: Engineering, 112. pp. 185-195. ISSN 1359-8368

Thai, Huu-Tai, Nguyen, Trung-Kien, Vo, Thuc and Ngo, Tuan (2017) A new simple shear deformation plate theory. Composite Structures, 171. pp. 277-285. ISSN 0263-8223

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Kim, Seung-Eock (2017) A review of continuum mechanics models for size-dependent analysis of beams and plates. Composite Structures, 177. pp. 196-219. ISSN 0263-8223

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Pham, Cao Hung (2017) Explicit simulation of bolted endplate composite beam-to-CFST column connections. Thin-Walled Structures, 119. pp. 749-759. ISSN 0263-8231

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Nguyen-Xuan, H. (2017) Nonlinear static and transient isogeometric analysis of functionally graded microplates based on the modified strain gradient theory. Engineering Structures, 153. pp. 598-612. ISSN 0141-0296

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Patel, Vipulkumar Ishvarbhai (2017) Size-dependant behaviour of functionally graded microplates based on the modified strain gradient elasticity theory and isogeometric analysis. Computers & Structures, 190. 219 - 241. ISSN 0045-7949

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Reddy, J.N. (2017) Post-buckling of functionally graded microplates under mechanical and thermal loads using isogeometric analysis. Engineering Structures, 150. pp. 905-917. ISSN 0141-0296

Tindall, Jess and Pendle, Jamie (2017) A comparison of UK domestic water services sizing methods with each other and with empirical data. Building Services Engineering Research and Technology, 38 (6). pp. 635-649. ISSN 0143-6244

Tiunov, I. A., Kotelev, M. S., Burluka, Alexey, Gushchin, P. A., Novikov, A. A. and Vinokurov, V. A. (2017) The effect of methylfurans on the physicochemical and performance characteristics of finished motor gasoline. Petroleum Chemistry, 57 (10). pp. 914-922. ISSN 0965-5441

Torelli, Giacomo, Gillie, Martin, Mandal, Parthasarathi and Tran, Van-Xuan (2017) A multiaxial load-induced thermal strain constitutive model for concrete. International Journal of Solids and Structures, 108. pp. 115-125. ISSN 0020-7683

Trinh, Luan (2017) Behaviours of functionally graded sandwich micro-beams and plates. Doctoral thesis, Northumbria University.

Trinh, Luan, Vo, Thuc, Thai, Huu-Tai and Mantari, J. L. (2017) Size-dependent behaviour of functionally graded sandwich microplates under mechanical and thermal loads. Composites Part B: Engineering, 124. pp. 218-241. ISSN 1359-8368

Villapún Puzas, Victor Manuel, Esat, Faye, Bull, Steve, Dover, Lynn and Gonzalez Sanchez, Sergio (2017) Tuning the Mechanical and Antimicrobial Performance of a Cu-Based Metallic Glass Composite through Cooling Rate Control and Annealing. Materials, 10 (5). p. 506. ISSN 1996-1944

Villapún Puzas, Victor Manuel, Medina, Judith, Pérez, Pablo, Esat, Faye, Inam, Fawad and Gonzalez Sanchez, Sergio (2017) Strategy for preventing excessive wear rate at high loads in bulk metallic glass composites. Materials & Design, 135. pp. 300-308. ISSN 0264-1275

Villapún Puzas, Victor Manuel, Zhang, H., Howden, C., Chow, L. Cheung, Esat, Faye, Pérez, Pablo, Sort, Jordi, Bull, Steve, Stach, James and Gonzalez Sanchez, Sergio (2017) Antimicrobial and wear performance of Cu-Zr-Al metallic glass composites. Materials & Design, 115. pp. 93-102. ISSN 0264-1275

Vo, Thuc, Thai, Huu-Tai and Aydogdu, Metin (2017) Free vibration of axially loaded composite beams using a four-unknown shear and normal deformation theory. Composite Structures, 178. pp. 406-414. ISSN 0263-8223

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Lanc, Domagoj and Karamanli, Armagan (2017) Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory. Composite Structures, 176. pp. 388-397. ISSN 0263-8223

Wang, C., Xu, Ben, Terry, Jonathan, Smith, Stewart, Walton, Anthony and Li, Yifan (2017) Test Structures for Stepwise Deformation Sensing on Super-flexible Strain Sensors. In: Microelectronic Test Structures (ICMTS), 2017 IEEE International Conference on, 27-30 March 2017, Grenoble.

Wang, Cong, Wang, Ding, Kozhevnikov, Valery, Xu, Ben and Li, Yifan (2017) Elastic Instability Induced Mechano-Responsive Luminescence for Super-Flexible Strain Sensing. In: IEEE SENSORS 2017, 30th October - 1st November 2017, Glasgow.

Wang, Yaran, You, Shijun, Zhang, Huan, Zheng, Xuejing, Wei, Shen, Miao, Qingwei and Zheng, Wandong (2017) Operation stability analysis of district heating substation from the control perspective. Energy and Buildings, 154. pp. 373-390. ISSN 0378-7788

Wanniarachchi, K. S., Mahendran, M. and Poologanathan, Keerthan (2017) Shear behaviour and design of Lipped Channel Beams with non-circular web openings. Thin-Walled Structures, 119. pp. 83-102. ISSN 0263-8231

Ward, Kate, Crapper, Martin, Altuğ, Kerim and Crow, Jim (2017) The Byzantine Cisterns of Constantinople. Water Science and Technology : Water Supply, 17 (6). pp. 1499-1506. ISSN 1606-9749

Ward, Kate, Crow, James and Crapper, Martin (2017) Water supply infrastructure of Byzantine Constantinople. Journal of Roman Archaeology, 30. pp. 175-195. ISSN 1063-4304

Warren, Craig and Giannopoulos, Antonios (2017) Characterisation of a ground penetrating radar antenna in lossless homogeneous and lossy heterogeneous environments. Signal Processing, 132. pp. 221-226. ISSN 0165-1684

Warren, Craig, Šesnić, Silvestar, Ventura, Alessio, Pajewski, Lara, Poljak, Dragan and Giannopoulos, Antonios (2017) Comparison of Time-Domain Finite-Difference, Finite-Integration, and Integral-Equation Methods for Dipole Radiation in Half-Space Environments. Progress In Electromagnetics Research M, 57. pp. 175-183. ISSN 1937-8726

Wei, Jiacheng (2017) Graphene in epoxy system: Dispersion, preparation and reinforcement effect. Doctoral thesis, Northumbria University.

Wei, Jiacheng and Inam, Fawad (2017) Processing of epoxy/graphene nanocomposites: effects of surfactants. Journal of Polymer Science & Applications, 1 (1). p. 1000101.

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation. Royal Society Open Science, 4 (170778). ISSN 2054-5703

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) N,N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers, 9 (6). p. 193. ISSN 2073-4360

Xie, Y., Gilmour, M.S., Yuan, Yanping, Jin, H. and Wu, Hongwei (2017) A review on house design with energy saving system in the UK. Renewable and Sustainable Energy Reviews, 71. pp. 29-52. ISSN 1364-0321

Xing, Lu, Li, Liheng, Nan, Chi and Hu, Pingfang (2017) The Effects of Different Land Covers on Foundation Heat Exchangers Design in Chinese Rural Areas. Procedia Engineering, 205. pp. 2449-2456. ISSN 1877-7058

Yang, Longzhi, Li, Jie, Hackney, Philip, Chao, Fei and Flanagan, Mark (2017) Manual Collate and Pack Area Completion Time Estimation for POS and POP Manufacturing Scheduling. In: IEEE CPSCom-2017 - 10th IEEE International Conference on Cyber, Physical and Social Computing, 21st - 23rd June 2017, Bradford, UK.

Yuan, Yanping, Gao, Xiangkui, Wu, Hongwei, Zhang, Zujin, Cao, Xiaoling, Sun, Liangliang and Yu, Nanyang (2017) Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Method and model development. Energy, 119. pp. 817-833. ISSN 0360-5442

Yussupova, Akmaral Ardasher, Songfu, Liu, Namazbay, Ardasher, Rahimian, Farzad Pour and Nejad Ebrahim, Ahad (2017) Ornamental art and symbolism: activators of historical regeneration for Kazakhstan's landscape architecture. International Journal of Architectural Research: ArchNet-IJAR, 11 (3). p. 193. ISSN 1938-7806

Zabiegaj, Dominika, Buscaglia, M.T., Giuranno, D., Liggieri, L. and Ravera, Francesca (2017) Activated carbon monoliths from particle stabilized foams. Microporous and Mesoporous Materials, 239. pp. 45-53. ISSN 1387-1811

Zhang, Kui, Zhang, Guangru, Liu, Xiaoteng, Phan, Anh N. and Luo, Kun (2017) A Study on CO2 Decomposition to CO and O2 by the Combination of Catalysis and Dielectric-Barrier Discharges at Low Temperatures and Ambient Pressure. Industrial & Engineering Chemistry Research, 56 (12). pp. 3204-3216. ISSN 0888-5885

Zhang, Zhichao, Lu, Yiji, Ren, Haoliang, Roskilly, Anthony Paul, Chen, Longfei, Smallbone, Andrew and Wang, Yaodong (2017) Experimental and Numerical Investigation on the Macroscopic Characteristics of Hydrotreated Vegetable Oil (HVO) Spray. Energy Procedia, 142. pp. 474-480. ISSN 1876-6102