Items where Author is "Cheung, Wai Ming"

Cheung, Wai Ming (2022) A scenario-based approach to predict energy demand and carbon emission of electric vehicles on the electric grid. Environmental Science and Pollution Research, 29 (51). pp. 77300-77310. ISSN 0944-1344

Cheung, Wai Ming (2022) A Cradle-to-Deposition Life Cycle Assessment of Emerging Photovoltaic Materials. International Journal of Energy, Environment and Economics, 28 (2). pp. 69-86. ISSN 1054-853X

Hafez, Hisham, Kurda, Rawaz, Al-Ayish, Nadia, Garcia-Segura, Tatiana, Cheung, Wai Ming and Nagaratnam, Brabha (2021) A whole life cycle performance-based ECOnomic and ECOlogical assessment framework (ECO2) for concrete sustainability. Journal of Cleaner Production, 292. p. 126060. ISSN 0959-6526

Ramli, Jeffri, Coulson, James, Martin, James, Nagaratnam, Brabha, Poologanathan, Keerthan and Cheung, Wai Ming (2021) Crack Detection and Localisation in Steel-Fibre-Reinforced Self-Compacting Concrete Using Triaxial Accelerometers. Sensors, 21 (6). p. 2044. ISSN 1424-8220

Ramli, Jeffri, Nagaratnam, Brabha, Poologanathan, Keerthan, Cheung, Wai Ming, Suntharalingam, Thadshajini and Richardson, Alan (2020) Rheological Properties of Self-Compacting Concrete with 3-Dimensional Fibres. In: Proceedings of the 5th World Congress on Civil, Structural, and Environmental Engineering. World Congress on Civil, Structural, and Environmental Engineering . Avestia, Orléans, pp. 123-1. ISBN 9781927877746

Raybould, Blaid, Cheung, Wai Ming, Connor, Chris and Butcher, Ross (2020) An Investigation into UK Government Policy and Legislation to Renewable Energy and Greenhouse Gas Reduction Commitments. Clean Technologies and Environmental Policy, 22 (2). pp. 371-387. ISSN 1618-954X

Hafez, Hisham, Kurda, Rawaz, Cheung, Wai Ming and Nagaratnam, Brabha (2020) Comparative life cycle assessment between imported and recovered fly ash for blended cement concrete in the UK. Journal of Cleaner Production, 244. p. 118722. ISSN 0959-6526

Hafez, Hisham, Kurda, Rawaz, Cheung, Wai Ming and Nagaratnam, Brabha (2019) A Systematic Review of the Discrepancies in Life Cycle Assessments of Green Concrete. Applied Sciences, 9 (22). p. 4803. ISSN 2076-3417

Hafez, Hisham, Cheung, Wai Ming, Nagaratnam, Brabha and Kurda, Rawaz (2019) A Proposed Performance Based Approach for Life Cycle Assessment of Reinforced Blended Cement Concrete. In: Proceedings of Fifth International Conference on Sustainable Construction Materials and Technologies (SCMT5). Sustainable construction materials and technologies, 3 (5). Kingston University, London, pp. 50-61. ISBN 9781079084016

Onalaja, Afolabi, Cheung, Wai Ming and Samwinga, Victor (2018) Identifying Infrastructure project uncertainties during project initiation using system thinking. In: Proceedings of the Creative Construction Conference (2018). Diamond Congress Ltd., pp. 417-523.

Schaefer, Dirk and Cheung, Wai Ming (2018) Smart Packaging: Opportunities and Challenges. Procedia CIRP, 72. pp. 1022-1027. ISSN 2212-8271

Chinombo, Maxford, Vichare, Parag and Cheung, Wai Ming (2018) Comparison of Environmental Life Cycle Analysis of Aluminum Alloy (LM 6) Street Light Housing and Aluminum Alloy (AL SI12CU1{FE}) Housing. In: SEEP 2018 - 11th International Conference on Sustainable Energy & Environmental Protection, 8th - 11th May 2018, Paisley, UK.

Vichare, Parag, Zhang, Xianzhi, Dhokia, Vimal, Cheung, Wai Ming, Xiao, Wenlei and Zheng, Lianyu (2018) Computer Numerical Control Machine Tool Information Reusability within Virtual Machining Systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 593-604. ISSN 0954-4054

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1565-1577. ISSN 0268-3768

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2018) Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants. International Journal of Manufacturing Technology and Management (IJMTM), 32 (3). pp. 297-311. ISSN 1368-2148

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Comparative LCA of technology improvement opportunities for a 1.5 MW wind turbine in the context of an onshore wind farm. Clean Technologies and Environmental Policy, 20 (1). pp. 173-190. ISSN 1618-954X

Cheung, Wai Ming, Leong, Jun and Vichare, Parag (2017) Incorporating lean thinking and life cycle assessment to reduce environmental impacts of plastic injection moulded products. Journal of Cleaner Production, 167. pp. 759-775. ISSN 0959-6526

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2017) A Proposed Implementation Process for a Sustainable Manufacturing Framework. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 365-370. ISBN 978-1-61499-791-7

Anthony, Catherine and Cheung, Wai Ming (2017) Cost Evaluation in Design for End-of-Life of Automotive Components. Journal of Remanufacturing, 7 (1). pp. 97-111. ISSN 2210-464X

Leong, Jun and Cheung, Wai Ming (2017) Cross-Functional Mapping to Link Lean Manufacturing and Life Cycle Assessment in Environmental Impact Reduction. In: Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies, 68 . Springer, London, pp. 421-431. ISBN 9783319570778

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2016) An Empirical Analysis of the Factors That Support the Drivers of Sustainable Manufacturing. Procedia CIRP, 56. pp. 491-495. ISSN 2212-8271

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Fargani, Haitem (2016) A hybrid Stochastic Approach for Improving Uncertainty Analysis in the Design and Development of a Wind Turbine. Procedia CIRP, 56. pp. 19-24. ISSN 2212-8271

Simons, Philippa and Cheung, Wai Ming (2016) Development of a Quantitative Analysis System for Greener and Economically Sustainable Wind Farms. Journal of Cleaner Production, 133. pp. 886-898. ISSN 0959-6526

Ozoemena, Matthew, Hasan, Reaz and Cheung, Wai Ming (2016) Analysis of technology improvement opportunities for a 1.5 MW wind turbine using a hybrid stochastic approach in life cycle assessment. Renewable Energy, 93. pp. 369-382. ISSN 0960-1481

Tait, Michael W. and Cheung, Wai Ming (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2016) Identifying the barriers behind the lack of Six Sigma use in Libyan manufacturing companies. International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 10 (5). pp. 829-833.

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2016) A proposed mixed method methodology to identify the factors impeding the adoption of six sigma in Libyan manufacturing companies. In: Proceedings of the 2nd International Conference on Advances in Mechanical Engineering Istanbul 2016. Yildiz Technical University, Istanbul, pp. 49-52. ISBN 9786056590719

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2016) Ontological approach for organisational knowledge re-use in product developing environments. In: IEEE International Technology Management Conference 2005, 20-22 June 2005, Munich, Germany.

Gallimore, Alexandra and Cheung, Wai Ming (2016) Effects of Environmental Impact Based on Alternative Materials and Process Selection in Automotive Components Design. Journal of Industrial and Production Engineering, 33 (5). pp. 321-338. ISSN 2168-1015

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2015) A mixed method approach to data collection for the development of a six sigma framework for Libyan Manufacturing Companies (LMCs). In: MMIRA Asia Regional Conference, 19 - 20 September 2015, Osaka.

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2015) An approach to achieve operational effectiveness and sustainability requirements in manufacturing. In: International Conference on Manufacturing Research (ICMR2015), 8 - 10 September, 2015, Bath.

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2015) A proposed research methodology for six sigma deployment in Libyan manufacturing companies. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). University of Bath, UK, pp. 81-86. ISBN 1857901878

Cheung, Wai Ming and Pachisia, Vedant (2015) Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity. Resources, Conservation and Recycling, 101. pp. 34-41. ISSN 0921-3449

Cheung, Wai Ming, Marsh, Robert, Newnes, Linda, Mileham, Antony and Lanham, John (2015) Cost Data Modelling and Searching to Support Low Volume, High Complexity, Long Life Defence Systems Development. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (5). pp. 835-846. ISSN 0954-4054

Woods, Thomas, Cheung, Wai Ming, Hilton, Kevin and Penlington, Roger (2015) Environmental Impact Reduction for Small and Medium-sized Manufacturing Enterprises in New Product Development. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Cheung, Wai Ming and Aso, Raymond (2015) A Quantitative Analysis System for Greener Wind Turbine Concept Selection. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Cheung, Wai Ming, Marsh, Robert, Griffin, Paul W., Newnes, Linda B., Mileham, Antony R. and Lanham, John D. (2015) Towards Cleaner Production: a Roadmap for Predicting Product End-Of-Life Costs at Early Design Concept. Journal of Cleaner Production, 87 (15). pp. 431-441. ISSN 0959-6526

Aso, Raymond and Cheung, Wai Ming (2015) Towards greener horizontal-axis wind turbines: Analysis of carbon emissions, energy and costs at the early design stage. Journal of Cleaner Production, 87. pp. 263-274. ISSN 0959-6526

Ibude, Ikechukwu, Hasan, Reaz, Fargani, Haitem, Ozoemena, Matthew and Cheung, Wai Ming (2014) Sustainability analysis of Palm oil vs. Jatropha. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 265-270. ISBN 978-0-9926958-4-2

Fargani, Haitem, Cheung, Wai Ming, Hasan, Reaz and Birkett, Martin (2014) An integrated approach incorporating lean six sigma and life cycle assessment to support sustainable manufuacturing. In: Proceedings of the 12th International Conference on Manufacturing Research. Southampton Solent University, UK, pp. 227-231. ISBN 978-0-9926958-4-2

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2014) A hybrid Data Quality Indicator and statistical method for improving uncertainty analysis in LCA of a small off-grid wind turbine. In: ARCOM Doctoral Workshop on Sustainable Urban Retrofit and Technologies, 19 June 2014, London South Bank University.

Cheung, Wai Ming, Pachisia, Vedant and Hasan, Reaz (2014) Facilitating Waste Paper Recycling and Remanufacturing via a Cost Modelling Approach. In: International Conference on Sustainable Design and Manufacturing, 28-30 April 2014, Cardiff University.

Abdullah, Albradan, Tan, Kian and Cheung, Wai Ming (2013) Factors Influence ISO 9000 Implementation in Saudi Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September 2013, Cranfield University.

Ozoemena, Matthew, Cheung, Wai Ming, Hasan, Reaz and Hackney, Philip (2013) A Review of Life Cycle Assessment of Renewable Energy Systems. In: 11th International Conference on Manufacturing Research, 19 - 20 September 2013, Cranfield University.

Cheung, Wai Ming, Tan, Kian, Tan, Swee and Sutton, Caroline (2013) Strategies for Implementing Activity-Based Costing in the UK Manufacturing Industry. In: 11th International Conference on Manufacturing Research, 19-20 September, Cranfield University.

Wallace, Kieran and Cheung, Wai Ming (2013) Development of a compact excavator mounted dust suppression system. Journal of Cleaner Production, 54. pp. 344-352. ISSN 0959 6526

Rosamond, Emma and Cheung, Wai Ming (2013) A proposed method for Design for Eco-Finance. In: Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment. Springer, London, pp. 463-474. ISBN 9781447144250

Nezami, Mehran, Cheung, Wai Ming and Mansi, Safwat (2012) Adoption of Open Source and conventional ERP solutions for small and medium enterprises in manufacturing. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Cheung, Wai Ming and Wallace, Kieran (2012) Design and development of an excavator mounted dust suppression system. In: ICMR 2012: Proceedings of the 10th International Conference on Manufacturing Research, 11-13 September 2012, Aston University, Birmingham, UK.

Xu, Yuchun, Erkoyuncu, John Ahmed, Bankole, Oyetola, Goh, Yee Mey, Cheung, Wai Ming, Baguley, Paul, Wang, Qing, Arundachawat, Panumas, Shehab, Essam, Newnes, Linda and Roy, Rajkumar (2012) Cost engineering for manufacturing: current and future research. International Journal of Computer Integrated Manufacturing, 25 (4/5). pp. 300-314. ISSN 0951-192X

Woods, Thomas, Cheung, Wai Ming, Penlington, Roger and Hilton, Kevin (2011) Long term sustainable product development at the packaging sector. In: 9th International Conference on Manufacturing Research, 6 - 8 September 2011, Glasgow Caledonian University.

Cheung, Wai Ming, Mileham, Antony, Newnes, Linda, Marsh, Robert and Lanham, John (2011) Data-driven through-life costing to support product lifecycle management solutions in innovative product development. International Journal of Product Lifecycle Management, 5 (2/3/4). pp. 122-142. ISSN 1743-5110

Dai, Wei, Maropoulos, Paul, Cheung, Wai Ming and Tang, Xiaoqing (2011) Failure Knowledge based Decision-Making in Product Quality. International Journal of Product Lifecycle Management (IJPLM), 5 (2/3/4). pp. 143-163. ISSN 1743-5110

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming and Goh, Yee Mey (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer, London, pp. 135-151. ISBN 978-1441983213

Cheung, Wai Ming (2010) Integrated Product and Process Design and Development: The Product Realization Process. International Journal of Production Research, 48 (12). pp. 3713-3714. ISSN 0020-7543

Cheung, Wai Ming, Maropoulos, Paul and Matthews, Peter (2010) Linking design and manufacturing domains via web-based and enterprise integration technologies. International Journal of Computer Applications in Technology, 37 (3/4). pp. 182-197. ISSN 0952-8091

Marsh, Robert, Jonik, Martin, Lanham, John, Cheung, Wai Ming, Newnes, Linda and Mileham, Antony (2010) Modelling an assembly process using a close coupled generative cost model and a discrete event simulation. International Journal of Computer Integrated Manufacturing, 23 (3). pp. 257-269. ISSN 0951-192X

Cheung, Wai Ming, Griffin, Paul W., Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2010) Predicting the end of life of defence electronic systems from the conceptual design stage. In: Proceedings of the 36th International MATADOR Conference. Springer, London, pp. 149-152. ISBN 978-1849964326

Cheung, Wai Ming and Schaefer, Dirk (2010) Product lifecycle management: state-of-the-art and future perspectives. In: Enterprise information systems for business integration in SMEs: technological, organizational and social dimensions. IGI Global, Hershey, PA, pp. 37-55. ISBN 978-1605668925

Cheung, Wai Ming (2009) Book review: Electronic Waste Management. Journal Of Engineering Manufacture - Part B, 223 (11). pp. 1505-1506. ISSN 0954-4054

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2009) Data Modelling and Optimization in Cost Estimation for Innovative Low Volume Product Development. In: ICMR'09 - 7th International Conference on Manufacturing Research, 8th - 10th September 2009, Warwick, UK.

Cheung, Wai Ming, Marsh, Robert, Newnes, Linda, Mileham, Antony and Lanham, John (2009) Standards and inference of design information in through life costing of defence electronic products. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, 223 (2). pp. 169-181. ISSN 0954-4054

Cheung, Wai Ming, Mileham, Antony, Newnes, Linda, Marsh, Robert and Lanham, John (2009) An extended-enterprise digital data library for through-life cost estimation in innovative product development. In: Proceedings of the 6th CIRP-Sponsored International Conference on Digital Enterprise Technology. Advances in Intelligent and Soft Computing, 66 (2010). Springer, pp. 349-360. ISBN 9783642104299

Cheung, Wai Ming, Matthews, Paul, Gao, James X. and Maropoulos, Paul (2008) Advanced product development integration architecture: an out-of-box solution to support distributed production networks. International Journal of Production Research, 46 (12). pp. 3185-3206. ISSN 0020-7543

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming, Marsh, Robert, Lanham, John, Saravi, Mohammad and Bradbery, Ronald (2008) Predicting the whole-life cost of a product at the conceptual design stage. Journal of Engineering Design, 19 (2). pp. 99-112. ISSN 0954-4828

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2008) Through life costing in defence electronic systems: an integrated data-driven multi-level approach. In: Proceedings of the 38th International Conference in Computer and Industrial Engineering. Publishing House Electronics Industry, China, pp. 2119-2128. ISBN 978-71210074370

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2007) Cost estimation in product development: academic research and commercial systems evaluation. In: DET 2007: 4th International Conference in Digital Enterprise Technology, 19-21 September 2007, University of Bath, UK.

Saravi, Mohammad, Newnes, Linda, Mileham, Antony and Cheung, Wai Ming (2007) Improved cost estimation accuracy through quality improvement techniques. In: Proceedings of the 5th International Conference on Manufacturing Research. De Montfort University, Leicester, UK, pp. 65-69. ISBN 978-0955671401

Cheung, Wai Ming and Maropoulos, Paul (2007) A novel knowledge management methodology to support collaborative product development. In: Digital Enterprise Technology: Perspectives and Future Challenges. Springer, London, pp. 201-208. ISBN 978-0387498638

Cheung, Wai Ming, Newnes, Linda, Mileham, Antony, Marsh, Robert and Lanham, John (2007) A study of life cycle costing in the perspectives of research and commercial applications in the 21st century. In: Volume 4: ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications and the 19th Reliability, Stress Analysis, and Failure Prevention Conference. American Society of Mechanical Engineers, New York, USA, pp. 721-730. ISBN 0791848051

Maropoulos, Paul, Bramall, David, Chapman, Peter, Cheung, Wai Ming, McKay, Kevin and Rogers, Brian (2006) Digital Enterprise Technology in Production Networks. International Journal of Advanced Manufacturing Technology, 30 (9-10). pp. 911-916. ISSN 0268-3768

Cheung, Wai Ming, Bramall, David, Maropoulos, Paul, Gao, James and Aziz, Hayder (2006) Organisational Knowledge Encapsulation and Re-use in Collaborative Product Development. International Journal of Computer Integrated Manufacturing, 19 (7). pp. 736-750. ISSN 0951-192X

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2005) Open Standard, Open Source and Peer to Peer tools and methods for collaborative product development. Computers in Industry, 56. pp. 260-271. ISSN 0166-3615

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2004) Web-based Knowledge Management Methods for Collaborative Product Development. In: 2nd International Conference on Manufacturing Research, 1st - 3rd September 2004, Sheffield, UK.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James X. and Aziz, Hayder (2004) A Framework for distributed Workflows, Peer-to-Peer and PLM/PDM collaborations to support OEMs and SMEs. In: 2nd International CIRP Seminar on Digital Enterprise Technology (DET04), 1 - 3 September 2004, Seattle, Washington USA.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) Workflow Activity Task Controller: an Approach to Distribute Knowledge and Information in Collaborative Product Development. In: 12th Symposium of Product Data Technology EUROPE, 25th - 27th September 2003, Manchester.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) Knowledge-Enriched Product Data Management to Support Aggregate Process Planning. In: 1st International Conference on Manufacturing Research, 9th - 11th September 2003, Glasgow, UK.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) Open Standard, Open Source and Peer to Peer Methods for Collaborative Product Development and Knowledge Management. In: 12th Symposium of Product Data Technology EUROPE, 25th - 27th September 2003, Manchester.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) New Technologies and Standards for Design Knowledge Management in Collaborative Conceptual Design. In: ICE 2003 - 9th International Conference of Concurrent Enterprising, 16th - 18th June 2003, Espoo, Finland.

McKay, Kevin, Bramall, David, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Design Change Impact Analysis during Early Design Specification. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 598-604. ISSN 0951-192X

Gao, James, Aziz, Hayder, Maropoulos, Paul and Cheung, Wai Ming (2003) Application of Product Data Management Technologies for Enterprise Integration. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 491-500. ISSN 0951-192X

Bramall, David, McKay, Kevin, Roger, Brian, Chapman, Peter, Cheung, Wai Ming and Maropoulos, Paul (2003) Manufacturability analysis of early product designs. International Journal of Computer Integrated Manufacturing, 16 (7-8). pp. 501-508. ISSN 0951-192X

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) A Design Environment for Product Knowledge Management and Data Exchange. In: CIRP Design Seminar 2003, 11th - 14th May 2003, Grenoble, France.

Cheung, Wai Ming, Maropoulos, Paul, Gao, James and Aziz, Hayder (2003) The Application of Web-based Technologies in Product Data Management and Manufacturing Systems Interoperability and Data Exchange. In: 10th European Concurrent Engineering Conference, 14-16 April 2003, Plymouth.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2002) Advanced Tools and Technologies for Collaborative Product Development and Knowledge Management. In: 18th National Conference on Manufacturing Research, 2nd - 4th September 2002, Leeds, UK.

Cheung, Wai Ming, Aziz, Hayder, Maropoulos, Paul and Gao, James (2002) Integration of a Manufacturing Model with State-of-the-art PDM System. In: 1st CIRP International Seminar in Digital Enterprise Technology, 16-17 September 2002, Durham.

Young, Robert, Canciglieri-Jr, Osiris, Costa, Carlos, Dorador, Jesus, Zhao, Jie and Cheung, Wai Ming (2002) Information Support in an Integrated Product Development System. In: Third IDMME Conference - Integrated Design and Manufacturing in Mechanical Engineering, May 2000, Montreal, Canada.

Young, Robert I., Dorador, Jie, Zhao, Jesus and Cheung, Wai Ming (2001) A Manufacturing Information Infrastructure to Link Team Based Design to Global Manufacture. In: Global Engineering, Manufacturing and Enterprise Networks. Springer, pp. 283-290. ISBN 978-1-4757-1012-0

Cheung, Wai Ming, Zhao, Jie, Dorador-Gonzalez, Jesús Manuel and Young, Robert (2000) Linking Product Design and Manufacturing Capability through a Manufacturing Strategy Representation. In: CAPE2000 - 16th International Conference on Computer-Aided Production Engineering, 7th - 9th August 2000, Edinburgh, UK.

Zhao, Jie, Cheung, Wai Ming and Young, Robert (2000) The Influence of Manufacturing Information Models on Product Development Systems. In: Engineering Design Conference 2000, 27th - 29th June 2000, London, UK.

Zhao, Jie, Cheung, Wai Ming and Young, Robert (1999) A Consistent Manufacturing Data Model to Support Virtual Enterprises. International Journal of Agile Management Systems, 1 (3). pp. 150-158. ISSN 1465-4652