Items where Subject is "H200 Civil Engineering"

A

Abdulla, Kurdo F., Cunningham, Lee S. and Gillie, Martin (2017) Simulating masonry wall behaviour using a simplified micro-model approach. Engineering Structures, 151. pp. 349-365. ISSN 0141-0296

Abima, Cynthia Samuel, Akinlabi, Stephen, Madushele, Nkosinathi and Akinlabi, Esther (2022) Comparative study between TIG-MIG Hybrid, TIG and MIG welding of 1008 steel joints for enhanced structural integrity. Scientific African, 17. e01329. ISSN 2468-2276

Adedigba, Abibat Adeyoola (2022) Towards integrated sustainable solid waste management in Nigerian cities. Doctoral thesis, Northumbria University.

Adeniyi, Onaopepo, Rathnasiri, Pavithra, Oladinrin, Olugbenga Timo and Rana, Muhammad Qasim (2022) Strategic Capabilities for Enhancing the Flood Resilience of Business Premises: An Expert Review and Lessons from Case Studies. Sustainability, 14 (16). p. 9814. ISSN 2071-1050

Agnew, Brian, Brüne, Markus, Killing-Heinze, M., Pflitsch, Andreas and Sleiling, B. (2009) Subway climatology in Newcastle upon Tyne. In: 7th International Conference on Urban Climate, 29 June - 3 July 2009, Yokohama, Japan.

Ahmad, Muhammad, Yaqoob, Haseeb, Farooq, Muhammad Umar, Teoh, Yew Heng, Xu, Bin, Mahkamov, Khamid, Sultan, Muhammad, Ng, Kim Choon and Shahzad, Muhammad Wakil (2021) Experimental Investigations of a Solar Water Treatment System for Remote Desert Areas of Pakistan. Water, 13 (8). p. 1070. ISSN 2073-4441

Ait-Lamallam, Sara, Sebari, Imane, Yaagoubi, Reda and Doukari, Omar (2021) IFCInfra4OM: An Ontology to Integrate Operation and Maintenance Information in Highway Information Modelling. ISPRS International Journal of Geo-Information, 10 (5). p. 305. ISSN 2220-9964

Ait-Lamallam, Sara, Yaagoubi, Reda, Sebari, Imane and Doukari, Omar (2021) Extending the IFC Standard to Enable Road Operation and Maintenance Management through OpenBIM. ISPRS International Journal of Geo-Information, 10 (8). p. 496. ISSN 2220-9964

Akram, H. and Butt, Talib E. (2022) WET nexus between the three sectors – ‘waste to energy for transport’. Journal of Cleaner Production, 339. p. 130545. ISSN 0959-6526

Akter, Aysha, Crapper, Martin, Pender, Gareth, Wright, Grant and Wong, WaiSam (2013) Performance of a Geobag Revetment. II: Numerical Modeling. Journal of Hydraulic Engineering, 139 (8). pp. 877-885. ISSN 0733-9429

Akter, Aysha, Crapper, Martin, Pender, Garry, Wright, Grant and Wong, WaiSam (2012) Modelling the failure modes in geobag revetments. Water Science and Technology, 65 (3). pp. 418-425. ISSN 0273-1223

Akter, Aysha, Pender, Gareth, Wright, Grant and Crapper, Martin (2013) Performance of a Geobag Revetment. I: Quasi-Physical Modeling. Journal of Hydraulic Engineering, 139 (8). pp. 865-876. ISSN 0733-9429

Akter, Aysha, Pender, Garry, Wright, Grant and Crapper, Martin (2010) Modelling the Hydrodynamic Forces on Geobag Revetments using CES. In: First European Conference of the IAHR, 4-6 May 2010, Edinburgh.

Akter, Aysha, Pender, Garry, Wright, Grant and Crapper, Martin (2011) Predicting the hydrodynamic forces on geobag revetments. Journal of Flood Risk Management, 4 (4). pp. 328-338. ISSN 1753-318X

Akter, Aysha, Wright, Grant, Crapper, Martin and Pender, Garry (2009) Failure Mechanism in Geobag Structure. In: 4th IASME/WSEAS International Conference on Water Resources, Hydraulics and Hydrology (WHH '09), 24-26 February 2009, Cambridge.

Al-Hamd, Rwayda Kh. S., Gillie, Martin, Cunningham, Lee S., Warren, Holly and Albostami, Asad S. (2019) Novel shearhead reinforcement for slab-column connections subject to eccentric load and fire. Archives of Civil and Mechanical Engineering, 19 (2). pp. 503-524. ISSN 1644-9665

Al-Maghalseh, Maher and Maharmeh, Elias (2016) Economic and Technical Analysis of Distributed Generation Connection: A Wind Farm Case Study. Procedia Computer Science, 83. pp. 790-798. ISSN 1877-0509

Al-Nabulsi, Z., Mottram, J.T., Gillie, Martin, Kourra, N. and Williams, M.A. (2021) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials, 274. p. 121700. ISSN 0950-0618

Al-Saman, Ahmed, Cheffena, Michael, Elijah, Olakunle, Al-Gumaei, Yousef Ali Mohammed, Rahim, Sharul Kamal Abdul and Al-Hadhrami, Tawfik (2021) Survey of Millimeter-Wave Propagation Measurements and Models in Indoor Environments. Electronics, 10 (14). p. 1653. ISSN 2079-9292

Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2015) Hybrid Genetic Algorithm-Simulation Optimization Method for Proactively Planning Layout of Material Yard Laydown. Journal of Construction Engineering and Management, 141 (10). 06015001. ISSN 0733-9364

Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) Material and facility layout planning in construction projects using simulation. In: Proceedings of the 2014 Winter Simulation Conference, WSC 2014: December 7-10, 2014, Savannah, Georgia, USA. IEEE, Piscataway, NJ, pp. 3388-3398. ISBN 9781479974863, 9781479974849

Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) A simulation-based approach for material yard laydown planning. Automation in Construction, 40. pp. 1-8. ISSN 0926-5805

Alhiddi, Ahmed, Osborne, Allan and Anyigor, Kelechi (2019) Organizational Culture and Stakeholder Success Criteria in Construction Projects. Periodica Polytechnica Architecture, 50 (2). pp. 148-154. ISSN 1789-3437

Alsanat, Husam, Gunalan, Shanmuganathan, Guan, Hong, Keerthan, Poologanathan and Bull, John (2019) Experimental study of aluminium lipped channel sections subjected to web crippling under two flange load cases. Thin-Walled Structures, 141. pp. 460-476. ISSN 0263-8231

Alsanat, Husam, Gunalan, Shanmuganathan, Poologanathan, Keerthan, Guan, Hong and Tsavdaridis, Konstantinos D. (2019) Web crippling behaviour and design of aluminium lipped channel sections under two flange loading conditions. Thin-Walled Structures, 144. p. 106265. ISSN 0263-8231

Altaee, Mohammed, Cunningham, Lee S. and Gillie, Martin (2019) Practical Application of CFRP Strengthening to Steel Floor Beams with Web Openings: A numerical Investigation. Journal of Constructional Steel Research, 155. pp. 395-408. ISSN 0143-974X

Alzahrani, Hamdan, Arif, Mohammed, Kaushik, Amit, Rana, Muhammad Qasim and Aburas, Hani M. (2023) Evaluating the effects of indoor air quality on teacher performance using artificial neural network. Journal of Engineering, Design and Technology, 21 (2). pp. 604-618. ISSN 1726-0531

Ameli, Masoud, Agnew, Brian, Leung, Pak Sing, Ng, Bobo, Sutcliffe, C. J., Singh, J. and McGlen, R. J. (2013) A novel method for manufacturing sintered aluminium heat pipes (SAHP). Applied Thermal Engineering, 52 (2). pp. 498-504. ISSN 1359-4311

Ameli, Masoud, Agnew, Brian, Ng, Bobo, McGlen, R. J., Sutcliffe, C. J. and Singh, J. (2012) Sintered aluminium heat pipe (SAHP). In: 16th International Heat Pipe Conference (16th IHPC), 20-24 May 2012, Lyon, France.

Amess, Leon, Brandy, Dominic, Coventry, Kathryn Ann, Nagaratnam, Brabha and Richardson, Alan (2020) Crack healing in cementitious materials including test methods. Journal of Green Building, 15 (1). pp. 37-54. ISSN 1552-6100

Anwer, Shahnawaz, Li, Heng, Antwi-Afari, Maxwell Fordjour, Umer, Waleed, Mehmood, Imran and Wong, Arnold Yu Lok (2022) Effects of load carrying techniques on gait parameters, dynamic balance, and physiological parameters during a manual material handling task. Engineering, Construction and Architectural Management, 29 (9). pp. 3415-3438. ISSN 0969-9988

Arayici, Yusuf, Tokdemir, Onur Behzat and Kassem, Mohamad (2022) A Quantitative, Evidence-based Analysis of Correlations Between Lean Construction and Building Information Modelling. Smart and Sustainable Built Environment. ISSN 2046-6099 (In Press)

Arora, Mohit, Shinde, Amar Mohan, Yadav, Vinay, Maji, Kamal, Singh, Vipin and Myers, Rupert J. (2021) Ramifications of Indian vehicle scrapping policy across the mobility sector. Resources, Conservation and Recycling, 174. p. 105845. ISSN 0921-3449

Ascione, Luigi, Bonamini, Gabriele, Borri, Antonio, Corradi, Marco, Faggiano, Beatrice, Lavisci, Paolo, Piazza, Maurizio and Pizzo, Benedetto (2007) Considerazioni a margine del CNR-DT 201-05 Studi preliminari finalizzati alla redazione delle istruzioni per interventi di consolidamento statico di strutture lignee mediante l’utilizzo di compositi fibrorinforzati. L'Edilizia, 15 (146). pp. 16-21. ISSN 1593-3970

Ashworth, Allan and Perera, Srinath (2015) Cost Studies of Buildings [6th edition]. Taylor & Francis, London. ISBN 9781138017351

Asli, Rajul, Wedawatta, Gayan, Hedges, Peter and Park, Kenneth (2016) Building environmental assessment scheme for residential building in Brunei. In: Proceedings of the 32nd Annual ARCOM Conference. ARCOM, pp. 435-444.

Atanasov, V A, Greenwood, David, Sanchez, D E and Hatcher, C (2022) Factual Disagreements in Construction Delay Disputes: Identification, Evaluation and Testing of the Justifications for Difference in Opinion. IOP Conference Series: Earth and Environmental Science, 1101 (5). 052001. ISSN 1755-1307

Atanasov, Vasil, Greenwood, David, Thurairajah, Niraj and Hatcher, Cara (2021) Forensic delay analysis: An investigation of the reasons for disagreements in timerelated disputes. In: Proceedings of 37th ARCOM (Association of Researchers in Construction Management) annual conference 2021: Recover, Rebuild and Renew: Shifting mindsets and practices to change the future, 6-7 September 2021, [virtual conference]. Association of Researchers in Construction Management (ARCOM), Leeds, pp. 460-469. ISBN 978099554656

Avorio, Antonio, Borri, Antonio, Corradi, Marco and Celestini, Giancarlo (1999) Miglioramento sismico: Sperimentazione e analisi sull’utilizzo dei materiali compositi nelle costruzioni in muratura. L'Edilizia, 13 (9-10). pp. 60-71. ISSN 1593-3970

Avorio, Antonio, Borri, Antonio, Corradi, Marco and Celestini, Giancarlo (1999) Sperimentazione sull’uso dei materiali compositi per il miglioramento sismico di costruzioni in muratura: alcuni risultati preliminari. In: Assisi 1999: Seismic Performance of Built Heritage in Small Historic Centres, 22-24 April, 1999, Assisi, Italy.

Azimov, Ulugbek and Avezova, Nilufar (2022) Sustainable small-scale hydropower solutions in Central Asian countries for local and cross-border energy/water supply. Renewable and Sustainable Energy Reviews, 167. p. 112726. ISSN 1364-0321

B

Babatunde, Solomon, Perera, Srinath, Udeaja, Chika and Zhou, Lei (2014) Challenges of Implementing Infrastructure Megaprojects through Public-Private Partnerships in Nigeria: A Case Study of Road Infrastructure. International Journal of Architecture, Engineering and Construction, 3 (2). pp. 142-154. ISSN 1911-110X

Babatunde, Solomon, Perera, Srinath, Zhou, Lei and Udeaja, Chika (2015) Barriers to public private partnership projects in developing countries a case of Nigeria. Engineering, Construction and Architectural Management, 22 (6). pp. 669-691. ISSN 0969 9988

Badawy, Mohamed, Alqahtani, Fahad and Hafez, Hisham (2022) Identifying the risk factors affecting the overall cost risk in residential projects at the early stage. Ain Shams Engineering Journal, 13 (2). p. 101586. ISSN 2090-4479

Ball, Richard, Pesce, Giovanni, Molinari, Marco, Grant, James, Parker, Steven and Fletcher, Ian (2016) Atomistic Modelling for the Study of Dissolution and Carbonation of Lime. In: 36th Cement and Concrete Science Conference, 5th - 6th September 2016, Cardiff.

Ball, Richard, Pesce, Giovanni, Nuno, Manuel, Odgers, David and Henry, Alison (2016) Freeze thaw and salt crystallisation testing of nanolime treated weathered bath stone. In: 13th International Congress on the Deterioration and Conservation of Stone, 6-10 September, 2016, Paisley, Scotland.

Barbieri, A., Borri, Antonio, Corradi, Marco and di Tommaso, Angelo (2002) Dynamic Behaviour of Masonry Vaults Repaired with FRP: Experimental Analysis. In: Conference Proceedings 9. International Masonry Society, pp. 7-16.

Barry, Andrew, Bajracharya, K., Crapper, Martin, Prommer, H. and Cunningham, Colin (2000) Comparison of split-operator methods for solving coupled chemical non-equilibrium reaction/groundwater transport models. Mathematics and Computers in Simulation, 53 (1-2). pp. 113-127. ISSN 0378 4754

Barry, Andrew, Parlange, J.-Y., Li, L., Jeng, D.-S. and Crapper, Martin (2005) Green–Ampt approximations. Advances in Water Resources, 28 (10). pp. 1003-1009. ISSN 0309 1708

Barry, Andrew, Wissmeier, Laurin, Parlange, J.-Y. and Crapper, Martin (2010) Discussion of “Approximation of M -Function for Partially Penetrating Wells” by Sushil K. Singh. Journal of Irrigation and Drainage Engineering, 136 (3). pp. 214-217. ISSN 0733-9437

Bastianini, Filippo, Corradi, Marco, Borri, Antonio and di Tommaso, Angelo (2005) Retrofit and monitoring of an historical building using “Smart” CFRP with embedded fibre optic Brillouin sensors. Construction and Building Materials, 19 (7). pp. 525-535. ISSN 09500618

Bastianini, Filippo, di Tommaso, Angelo, Borri, Antonio and Corradi, Marco (2003) Composite strengthenings for seismic retrofit and repair and advanced fiber optic monitoring on a real scale masonry structure. In: Composites in Construction 2003. CCC, pp. 659-664.

Baughan, Robert, Smith, Simon D., Crapper, Martin and Sherrat, Fred (2019) 'Keeping up to date with the Old Way of Doing Things': Competence Management in the UK Heritage Railway Industry. In: Railway Engineering 2019, 3rd - 4th July 2019, Edinburgh, UK.

Beatini, Valentina, Rajanayagam, Heshachanaa and Poologanathan, Keerthan (0202) Structural and Spatial Minimal Requirement Efficacy of Emergency Shelters for Different Emergencies. Buildings, 13 (1). p. 32. ISSN 2075-5309

Beatini, Valentina, Royer-Carfagni, Gianni and Tasora, Alessandro (2019) Modeling the shear failure of segmental arches. International Journal of Solids and Structures, 158. pp. 21-39. ISSN 0020-7683

Beatini, Valentina, Royer-Carfagni, Gianni and Tasora, Alessandro (2017) A regularized non-smooth contact dynamics approach for architectural masonry structures. Computers & Structures, 187. pp. 88-100. ISSN 0045-7949

Bell, Sarah, Boyle, Evan, Canton, John, Khan, Zara, Quinn, Ruth, Rollason, Ed, Tully, Kieran, Ward, Sarah and Xavier, Patricia (2022) Establishing a statement of principles for community engagement with civil engineering. Proceedings of the ICE - Civil Engineering, 175 (3). pp. 133-140. ISSN 0965-089X

Bellini, Alessandro, Aiello, Maria Antonietta, Bencardino, Francesco, de Carvalho Bello, Claudia Brito, Castori, Giulio, Cecchi, Antonella, Ceroni, Francesca, Corradi, Marco, D'Antino, Tommaso, De Santis, Stefano, Fagone, Mario, de Felice, Gianmarco, Leone, Marianovella, Lignola, Gian Piero, Napoli, Annalisa, Nisticò, Mattia, Poggi, Carlo, Prota, Andrea, Ranocchiai, Giovanna, Realfonzo, Roberto, Sacco, Elio and Mazzotti, Claudio (2021) Influence of different set-up parameters on the bond behavior of FRCM composites. Construction and Building Materials, 308. p. 124964. ISSN 0950-0618

Benghi, Claudio (2019) Automated verification for collaborative workflows in a Digital Plan of Work. Automation in Construction, 107. p. 102926. ISSN 0926-5805

Benghi, Claudio and Dawood, Nashwan (2008) Integration of design and construction through information technology: from programme rehearsal to programme development. In: CONVR 2008: 8th International Conference on Construction Applications of Virtual Reality, 20-21 October 2008, Kuala Lumpur, Malaysia.

Bigoni, Davide, Tommasini, Mirko, Misseroni, Diego, Kirillov, Oleg and Noselli, Giovanni (2018) Flutter and divergence instability in the Pflüger column: Experimental evidence of the Ziegler destabilization paradox. Journal of the Mechanics and Physics of Solids, 116. pp. 99-116. ISSN 0022-5096

Blewett, Tymandra (2000) The visual impacts of renewable energy systems : UK public perception of building integrated photovoltaics. Doctoral thesis, University of Northumbria at Newcastle.

Bokor, Orsi, Florez Perez, Laura, Osborne, Allan and Gledson, Barry (2018) A framework for modelling masonry construction using hybrid simulation approaches. In: Creative Construction Conference 2018, 30 June - 3 July 2018, Ljublana.

Bokor, Orsolya, Florez, Laura, Osborne, Allan and Gledson, Barry J. (2019) Overview of construction simulation approaches to model construction processes. Organization, Technology and Management in Construction: an International Journal, 11 (1). pp. 1853-1861. ISSN 1847-6228

Bokor, Orsolya, Florez Perez, Laura, Gledson, Barry and Osborne, Allan (2019) Input for Hybrid Simulation Modelling Construction Operations. In: Proceedings of the Creative Construction Conference 2019. Budapest University of Technology and Economics, Budapest, pp. 571-577. ISBN 9786155270567

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Determination of Shear Strength of Masonry Panels Through Different Tests. International Journal of Architectural Heritage, 9 (8). pp. 913-927. ISSN 1558-3058

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Intrados strengthening of brick masonry arches with composite materials. Composites Part B: Engineering, 42 (5). pp. 1164-1172. ISSN 1359-8368

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Masonry Columns Confined by Steel Fiber Composite Wraps. Materials, 4 (12). pp. 311-326. ISSN 1996-1944

Borri, Antonio, Castori, Giulio and Corradi, Marco (2013) Masonry Confinement Using Steel Cords. Journal of Materials in Civil Engineering, 25 (12). pp. 1910-1919. ISSN 0899-1561

Borri, Antonio, Castori, Giulio and Corradi, Marco (2011) Shear behavior of masonry panels strengthened by high strength steel cords. Construction and Building Materials, 25 (2). pp. 494-503. ISSN 0950-0618

Borri, Antonio, Castori, Giulio and Corradi, Marco (2014) Strengthening of fair face masonry columns with steel hooping. Materials and Structures, 47 (12). pp. 2117-2130. ISSN 1359-5997

Borri, Antonio, Castori, Giulio and Corradi, Marco (2013) Utilizzo di trefoli metallici per il rinforzo di colonne murarie con mattoni “Faccia Vista”. Ingenio, 16. ISSN 2307-8928

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2014) Masonry wall panels with GFRP and steel-cord strengthening subjected to cyclic shear: An experimental study. Construction and Building Materials, 56. pp. 63-73. ISSN 09500618

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2013) Tecniche innovative di rinforzo di murature storiche. Sperimentazioni in situ con un intonaco armato di nuova generazione. Ingenio, 16. pp. 1-15. ISSN 2307-8928

Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2011) Shear behavior of unreinforced and reinforced masonry panels subjected to in situ diagonal compression tests. Construction and Building Materials, 25 (12). pp. 4403-4414. ISSN 09500618

Borri, Antonio and Corradi, Marco (2000) Consolidamento di strutture lignee con tessuti in materiale composito: risultati di una sperimentazione. L'Edilizia, 14. pp. 58-63. ISSN 1593-3970

Borri, Antonio and Corradi, Marco (2011) Strengthening of timber beams with high strength steel cords. Composites Part B: Engineering, 42 (6). pp. 1480-1491. ISSN 13598368

Borri, Antonio, Corradi, Marco, Agneloni, Emo and Celestini, Giancarlo (2002) Miglioramento sismico: sperimentazioni relative al collegamento tra murature ed FRP. L'Edilizia, 2 (2-3). pp. 50-58. ISSN 1593-3970

Borri, Antonio, Corradi, Marco, Castori, Giulio and De Maria, Alessandro (2015) A method for the analysis and classification of historic masonry. Bulletin of Earthquake Engineering, 13 (9). pp. 2647-2665. ISSN 1570-761X

Borri, Antonio, Corradi, Marco and De Maria, Alessandro (2020) The Failure of Masonry Walls by Disaggregation and the Masonry Quality Index. Heritage, 3 (4). pp. 1162-1198. ISSN 2571-9408

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2004) Rinforzo di strutture lignee mediante materiali compositi FRP modellazione progetto e sperimentazione. In: Il Manuale del legno strutturale: Interventi sulle strutture. Mancosu, Rome, pp. 164-189. ISBN 9788887017410

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2005) A method for flexural reinforcement of old wood beams with CFRP materials. Composites Part B: Engineering, 36 (2). pp. 143-153. ISSN 13598368

Borri, Antonio, Corradi, Marco and Speranzini, Emanuela (2013) Bending Tests on Natural Fiber Reinforced Fir Wooden Elements. Advanced Materials Research, 778. pp. 537-544. ISSN 1662-8985

Borri, Antonio, Corradi, Marco and Speranzini, Emanuela (2013) Reinforcement of wood with natural fibers. Composites Part B: Engineering, 53. pp. 1-8. ISSN 1359-8368

Borri, Antonio, Corradi, Marco and Speranzini, Emanuela (2001) Travi in legno rinforzate con barre o con tessuti in fibra di carbonio. L'Edilizia, 15 (8-9). pp. 48-56. ISSN 1593-3970

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2008) Consolidation and reinforcement of stone walls using a reinforced repointing grid. In: Structural Analysis of Historic Constructions, 6th International Conference, 2nd - 4th July 2008, Bath, UK.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2010) Reinforcement of Historic Masonry with High Strength Steel Cords. Masonry International, 23 (3). pp. 79-90. ISSN 0950-2289

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reinforcement of historic masonry: the “Reticolatus” technique. In: IF CRASC 2009 Congress on Forensic Engineering Congress on Collapses, Reliability and Retrofit of Constructions, 2nd - 4th December 2009, Naples, Italy.

Borri, Antonio, Corradi, Marco, Speranzini, Emanuela and Giannantoni, Andrea (2009) Reticolatus: una tecnica di rinforzo di murature irregolari mediante una maglia continua di trefoli metallici. L'Edilizia, 22. pp. 24-34. ISSN 1593-3970

Borri, Antonio, Corradi, Marco and Vignoli, Andrea (2002) New Materials for Strengthening and Seismic Upgrading Interventions. In: ARCCHIP 2002, 22 - 28 April 2002, Prague, Czech Republic.

Borri, Antonio, Corradi, Marco and Vignoli, Andrea (2001) Seismic upgrading of masonry structures with FRP. In: 7th International Conference on Inspection Appraisal Repairs and Maintenance of Buildings and Structures, 11 - 13 September 2001, Nottingham Trent University.

Borri, Antonio, Sisti, Romina and Corradi, Marco (2021) Seismic retrofit of stone walls with timber panels and steel wire ropes. Proceedings of the Institution of Civil Engineers - Structures and Buildings, 174 (5). pp. 359-371. ISSN 0965-0911

Borri, Antonio, Sisti, Romina, Corradi, Marco and Giannantoni, Andrea (2016) Experimental analysis of masonry ring beams reinforced with composite materials. In: Brick and Block Masonry - Trends, Innovations and Challenges: Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016. CRC Press, London, pp. 717-726. ISBN 9781138029996, 9781315374963

Bouazza, Touria, Greenwood, David and Udeaja, Chika (2016) A Framework for managing knowledge using Building Information Modelling (BIM) in a Supply Chain Environment. In: First International Conference of the BIM Academic Forum, 13-15 September 2016, Glasgow.

Bouazza, Touria, Udeaja, Chika and Greenwood, David (2016) Towards Developing a Framework for Managing Knowledge Using BIM Methodology in a Supply Chain. In: 16th International Conference on Computing in Civil and Building Engineering (ICCCBE2016), 6-8 July 2016, Osaka.

Bouazza, Touria, Udeaja, Chika and Greenwood, David (2015) The Use of Building Information Modelling (BIM) in managing knowledge in construction project delivery: a conceptual model. In: ICES BIM 2015 Conference, 9-11 September 2015, Bristol.

Boyacioglu, S, Greenwood, David and Rogage, Kay (2022) Incorporating Emerging Technologies in the Forensic Analysis of Construction Project Delays. IOP Conference Series: Earth and Environmental Science, 1101 (5). 052029. ISSN 1755-1307

Bracken, Louise J., Bulkeley, H.A. and Maynard, C.M. (2014) Micro-hydro power in the UK: The role of communities in an emerging energy resource. Energy Policy, 68. pp. 92-101. ISSN 0301-4215

Bracken, Louise J., Oughton, E. A., Donaldson, A., Cook, B., Forrester, J., Spray, C., Cinderby, S., Passmore, D. and Bissett, N. (2016) Flood risk management, an approach to managing cross-border hazards. Natural Hazards, 82 (S2). pp. 217-240. ISSN 0921-030X

Bracken, Louise J., Turnbull, Laura, Wainwright, John and Bogaart, Patrick (2015) Sediment connectivity: a framework for understanding sediment transfer at multiple scales. Earth Surface Processes and Landforms, 40 (2). pp. 177-188. ISSN 0197-9337

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2017) Effect of stabilisation on mechanical properties, moisture buffering and water durability of hypercompacted earth. Construction and Building Materials, 149. pp. 733-740. ISSN 0950-0618

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2016) Effect of very high compaction pressures on the physical and mechanical properties of earthen materials. E3S Web of Conferences, 9. p. 14004. ISSN 2267-1242

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2017) Mechanical behaviour of hypercompacted earth for building construction. Materials and Structures, 50 (2). p. 160. ISSN 1359-5997

Bruno, Agostino Walter, Gallipoli, Domenico, Perlot, Céline and Mendes, Joao (2019) Optimization of bricks production by earth hypercompaction prior to firing. Journal of Cleaner Production, 214. pp. 475-482. ISSN 0959-6526

Bull, John W. (2016) Computer analysis and design of masonry structures. Saxe-Coburg Publications. ISBN 978-1-874672-44-9

Bull, John W. and Zhou, Xiangming (2018) Concrete in Extreme Environments. Whittles Publishing. ISBN 978-184995-327-6

C

Candela, Michele, Borri, Antonio, Corradi, Marco and Righetti, Luca (2016) Effect of transversal steel connectors on the behaviour of rubble stone-masonry walls: two case studies in Italy. In: 16th International Brick and Block Masonry Conference, 26th - 30th June 2016, Padua.

Cao, Yue, Tong, Wang, Omprakash, Kaiwartya, Geyong, Min, Naveed, Ahmad and Abdullah, Abdul (2018) An EV Charging Management System Concerning Drivers' Trip Duration and Mobility Uncertainty. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 48 (4). pp. 596-607. ISSN 2168-2216

Cao, Yue and Wang, Ning (2017) Towards efficient electric vehicle charging using VANET-based information dissemination. IEEE Transactions on Vehicular Technology, 66 (4). pp. 2886-2901. ISSN 0018-9545

Cao, Yue, Wang, Ning, Kamel, George and Young-Jin, Kim (2017) An Electric Vehicle Charging Management Scheme Based on Publish/Subscribe Communication Framework. IEEE Systems Journal, 11 (3). pp. 1822-1835. ISSN 1932-8184

Cao, Yue, Ye, Miao, Geyong, Min, Tong, Wang, Zhiwei, Zhao and Houbing, Song (2016) Vehicular-Publish/Subscribe (V-P/S) communication enabled on-the-move EV charging management. IEEE Communications Magazine, 54 (12). pp. 84-92. ISSN 0163-6804

Castori, G., Speranzini, E., Corradi, Marco, Agnetti, S. and Bisciotti, G. (2020) Shear strengthening of masonry panels using a gfrp-reinforced mortar coating. In: EURODYN 2020: Proceedings of the XI International Conference on Structural Dynamics Streamed from Athens, Greece 23-26 November 2020. Proceedings of the International Conference on Structural Dynamic, EURODYN (2). European Association for Structural Dynamics, Munich, pp. 4358-4372. ISBN 9786188507210

Castori, Giulio, Borri, Antonio and Corradi, Marco (2016) Behavior of thin masonry arches repaired using composite materials. Composites Part B: Engineering, 87. pp. 311-321. ISSN 1359-8368

Castori, Giulio, Borri, Antonio, De Maria, Alessandro, Corradi, Marco and Sisti, Romina (2017) Seismic vulnerability assessment of a monumental masonry building. Engineering Structures, 136. pp. 454-465. ISSN 0141-0296

Castori, Giulio, Borri, Antonio, Sisti, Romina, Corradi, Marco and De Maria, Alessandro (2016) Seismic analysis of artistic assets: the Piero della Francesca’s fresco called “Resurrection”. In: 10th International conference on Structural Analysis of Historical Constructions (SAHC 2016), 13th -15th September 2016, Leuven.

Castori, Giulio, Corradi, Marco, Borri, Antonio and Sisti, Romina (2016) The Reticulatus method for shear strengthening of fair-faced masonry. Bulletin of Earthquake Engineering, 14 (12). pp. 3547-3571. ISSN 1570-761X

Chan, Paul and Moehler, Robert (2008) Coordination of infrastructure development : some international comparisons. Project Report. Institution of Civil Engineers, Newcastle-upon-Tyne.

Charlton, James, Kelly, Kenneth, Greenwood, David and Moreton, Leo (2020) The complexities of managing historic buildings with BIM. Engineering, Construction and Architectural Management, 28 (2). pp. 570-583. ISSN 0969-9988

Chaumeil, Florian and Crapper, Martin (2013) DEM simulations of initial deposition of colloidal particles around non-woven membrane spacers. Journal of Membrane Science, 442. pp. 254-263. ISSN 0376 7388

Chaumeil, Florian and Crapper, Martin (2014) Using the DEM-CFD method to predict Brownian particle deposition in a constricted tube. Particuology, 15. pp. 94-106. ISSN 1674 2001

Chen, Xiaomin, Yang, Shuang-Hua, Yang, Lili and Chen, Xi (2015) A Benchmarking Model for Household Water Consumption Based on Adaptive Logic Networks. Procedia Engineering, 119. pp. 1391-1398. ISSN 1877-7058

Chen, Xuesong, Feng, Huijuan, Ma, Jiayao and Chen, Yan (2019) A plane linkage and its tessellation for deployable structure. Mechanism and Machine Theory, 142. p. 103605. ISSN 0094-114X

Chen, Ziguang, Chen, Chao, Wei, Shen, Wu, Yuqin, Wang, Yafeng and Wan, Yali (2016) Impact of the external window crack structure on indoor PM2.5 mass concentration. Building and Environment, 108. pp. 240-251. ISSN 0360-1323

Common, Gavin, Johansen, Eric and Greenwood, David (2000) A survey of the take-up of lean concepts among UK construction companies. In: 8th Annual Conference of the International Group for Lean Construction, 17-19 July 2000, Brighton.

Corradi, L., Corradi, Marco, Rasimelli, I., Corradi, Sandro and Marchetti, M. (2001) The building techniques of the Roman roads: the via Flaminia from Narni to Forum Flaminium. In: Extraordinary machines and structures in antiquity, 20 - 23 August 2001, Olympia, Greece.

Corradi, Marco and Borri, Antonio (2007) Fir and chestnut timber beams reinforced with GFRP pultruded elements. Composites Part B: Engineering, 38 (2). pp. 172-181. ISSN 13598368

Corradi, Marco, Borri, Antonio, Castori, Giulio and Speranzini, Emanuela (2016) Fully reversible reinforcement of softwood beams with unbonded composite plates. Composite Structures, 149. pp. 54-68. ISSN 0263-8223

Corradi, Marco, Borri, Antonio, Poverello, Elena and Castori, Giulio (2017) The Use of Transverse Connectors as Reinforcement of Multi-leaf Walls. Materials and Structures, 50. p. 114. ISSN 1359-5997

Corradi, Marco, Borri, Antonio, Righetti, Luca and Speranzini, Emanuela (2017) Uncertainty analysis of FRP reinforced timber beams. Composites Part B Engineering, 113. pp. 174-184. ISSN 1359-8368

Corradi, Marco, Borri, Antonio and Vignoli, Andrea (2008) Experimental Evaluation of In-plane Shear Behaviour of Masonry Walls Retrofitted Using Conventional and Innovative Methods. Masonry International, 21 (1). pp. 29-41. ISSN 0950-2289

Corradi, Marco, Borri, Antonio and Vignoli, Andrea (2003) Experimental study on the determination of strength of masonry walls. Construction and Building Materials, 17 (5). pp. 325-337. ISSN 09500618

Corradi, Marco, Borri, Antonio and Vignoli, Andrea (2002) Strengthening techniques tested on masonry structures struck by the Umbria–Marche earthquake of 1997–1998. Construction and Building Materials, 16 (4). pp. 229-239. ISSN 09500618

Corradi, Marco, Castori, Giulio and Borri, Antonio (2020) Repairing brickwork panels using titanium rods embedded in the mortar joints. Engineering Structures, 221. p. 111099. ISSN 0141-0296

Corradi, Marco, Grazini, Andrea and Borri, Antonio (2007) Confinement of brick masonry columns with CFRP materials. Composites Science and Technology, 67 (9). pp. 1772-1783. ISSN 02663538

Corradi, Marco, Maheri, Alireza and Osofero, Israel (2014) Design of reinforced and unreinforced timber beams under uncertainties. In: CST2014: The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.

Corradi, Marco, Mustafaraj, Enea and Speranzini, Emanuela (2023) Sustainability considerations in remediation, retrofit, and seismic upgrading of historic masonry structures. Environmental Science and Pollution Research, 30 (10). pp. 25274-25286. ISSN 0944-1344

Corradi, Marco, Osofero, Israel, Borri, Antonio and Castori, Giulio (2015) Strengthening of Historic Masonry Structures with Composite Materials. In: Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures. IGI Global, Hershey, PA, pp. 257-292. ISBN 9781466682863

Corradi, Marco, Osofero, Israel, Coventry, Kathryn, Richardson, Alan, Vo, Thuc and Udeaja, Chika (2014) Analysis and classification of historic construction within the north-east of England. In: 15th International Conference & Exhibition, Structural Faults and Repair, 8 - 10 July 2014, Imperial College London.

Corradi, Marco, Righetti, Luca, Osofero, Israel, Borri, Antonio, Castori, Giulio and Sisti, Romina (2015) Accelerated aging and fatigue effects on GFRP grids. In: Ingegneria Forense, Crolli, Affidabilita strutturale e Consolidamento. Associazione Italiana di Ingegneria Forense, pp. 455-466. ISBN 978-88-579-0447-4

Corradi, Marco, Speranzini, Emanuela and Bisciotti, Giordano (2020) Out‐of‐plane reinforcement of masonry walls using joint-embedded steel cables. Bulletin of Earthquake Engineering, 18 (10). pp. 4755-4782. ISSN 1570-761X

Corradi, Marco, Speranzini, Emanuela, Borri, Antonio and Vignoli, Andrea (2006) In-plane shear reinforcement of wood beam floors with FRP. Composites Part B: Engineering, 37 (4-5). pp. 310-319. ISSN 13598368

Corradi, Marco, Tedeschi, Cristina, Binda, Luigia and Borri, Antonio (2008) Experimental evaluation of shear and compression strength of masonry wall before and after reinforcement: Deep repointing. Construction and Building Materials, 22 (4). pp. 463-472. ISSN 0950-0618

Corradi, Marco, Vo, Thuc, Poologanathan, Keerthan and Osofero, Adelaja Israel (2018) Flexural behaviour of hardwood and softwood beams with mechanically connected GFRP plates. Composite Structures, 206. pp. 610-620. ISSN 0263-8223

Corral, Javier Rodriguez, Mitrani, Helen, Dade-Robertson, Martyn, Zhang, Meng and Maiello, Pietro (2020) Agarose gel as a soil analogue for the development of advanced bio-mediated soil improvement methods. Canadian Geotechnical Journal, 57 (12). pp. 2010-2019. ISSN 0008-3674

Costa, Stefano, Pesce, Giovanni and Bianconi, L. (2009) Il progetto IOSA cinque anni dopo: cambiamenti di prospettiva e indirizzi per il futuro. In: Atti del IV workshop nazionale Open Source, Free Software e Open Format nei processi di ricerca archeologica, 27-28 April 2009, Rome.

Cotterill, Sarah and Bracken, Louise J. (2020) Assessing the Effectiveness of Sustainable Drainage Systems (SuDS): Interventions, Impacts and Challenges. Water, 12 (11). p. 3160. ISSN 2073-4441

Coventry, Kathryn and Griffiths, J. (2007) A rationale for the production of Devon Cob to ensure performance. In: International Conference on Sustainable Construction Materials and Technologies, 11th - 13th June 2007, Coventry, UK.

Coventry, Kathryn, Richardson, Alan and Diaz, Eli (2015) Impact resistance of concrete – using slit rubber from tyres. In: Euro-Elecs-2015: Latin American and European Conference on Sustainable Buildings and Communities, 21-23 July 2015, Guimaraes.

Crapper, Martin (2007) How Roman engineers could have flooded the Colosseum. Proceedings of the ICE - Civil Engineering, 160 (4). pp. 184-191. ISSN 0965-089X

Crapper, Martin, Bruce, Tom and Gouble, Cécile (2000) Flow field visualization of sediment-laden flow using ultrasonic imaging. Dynamics of Atmospheres and Oceans, 31 (1-4). pp. 233-245. ISSN 0377 0265

Crapper, Martin, Donald, R., Hill, D., Hall, A. and French, W. (2008) Models for teaching sustainable development to children. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 161 (4). pp. 229-236. ISSN 1478-4629

Crapper, Martin, Duursma, G., Robertson, C. and Wong, S. (2007) EDEM-FLUENT investigation of bubble-tube interactions in gas-fluidized beds. In: 7th International Conference on Multiphase Flow, 9-13 July 2007, Leipzig.

Crapper, Martin, Ellis, Ruth and Furber, Alison (2010) Improving the case-based reasoning prediction of the compliance of treated effluent from constructed wetlands. Civil Engineering and Environmental Systems, 27 (2). pp. 123-132. ISSN 1028-6608

Crapper, Martin, Fell, Michael and Gammoh, Imad (2014) Earthworks risk assessment on a heritage railway. Proceedings of the ICE - Geotechnical Engineering, 167 (4). pp. 344-356. ISSN 1353-2618

Crapper, Martin and Wu, Tong (2008) A CFD Approach to modelling ex-situ bioremediation. In: 4th European Conference on Bioremediation, 3-6 September 2008, Crete.

Crapper, Martin and Wu, Tong (2008) The significance of ambient atmosphere and temperature on ex-situ remediation of hydrocarbon contaminated soil: a computational fluid dynamics modelling approach. In: Water and Sanitation in International Development and Disaster Relief, 28-30 May 2008, Edinburgh.

D

Dade-Robertson, Martyn, Corral, Javier Rodriguez, Mitrani, Helen, Zhang, Meng, Wipat, Anil, Ramirez-Figueroa, Carolina and Hernan, Luis (2016) Thinking Soils: a synthetic biology approach to material-based design computation. In: ACADIA 2016 Conference, 27th - 29th October 2016, Michigan.

Dalton, Nick and Hurrell, Mark (2023) Methods for Neighbourhood mapping, boundary agreement. Environment and Planning B, 50 (2). pp. 401-415. ISSN 0308-2164

Dargahi, Ali, Sanjani, Khezr, Nazari-Heris, Morteza, Mohammadi-Ivatloo, Behnam, Tohidi, Sajjad and Marzband, Mousa (2020) Scheduling of Air Conditioning and Thermal Energy Storage Systems Considering Demand Response Programs. Sustainability, 12 (18). p. 7311. ISSN 2071-1050

Davies, Alan James (1995) Towards a method of measurement and cost control for civil engineering work in the petrochemical industry. Doctoral thesis, University of Northumbria at Newcastle.

Dawood, Nashwan, Benghi, Claudio, Lorentzen, Thea and Pencreach, Yoann (2009) Integration of urban development and 5D planning. In: Proceedings of the 9th International Conference on Construction Applications of Virtual Reality, 5-6 November 2009, Sydney, Australia.

Dawood, Nashwan, Benghi, Claudio, Sanches, Romeu and Chavada, Rajiv (2010) An interactive lean system for resource planning of earthwork operations. In: IGLC18: 18th International Group for Lean Construction Conference, 14-16 July 2010, Haifa, Israel.

Degtyareva, N., Perampalam, Gatheeshgar, Poologanathan, Keerthan, Gunalan, S., Lawson, M. and Sunday, P. (2019) Combined bending and shear behaviour of slotted perforated steel channels: Numerical studies. Journal of Constructional Steel Research, 161. pp. 369-384. ISSN 0143-974X

Degtyareva, Natalia, Perampalam, Gatheeshgar, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Shyha, Islam and Mcintosh, Alex (2020) Local Buckling Strength and Design of Cold-Formed Steel Beams with Slotted Perforations. Thin-Walled Structures, 156. p. 106951. ISSN 0263-8231

Degtyareva, Natalia, Perampalam, Gatheeshgar, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Tsavdaridis, Konstantinos Daniel and Napper, Stephen (2020) New distortional buckling design rules for slotted perforated cold-formed steel beams. Journal of Constructional Steel Research, 168. p. 106006. ISSN 0143-974X

Demirdöğen, Gökhan, Işık, Zeynep and Arayici, Yusuf (2022) Determination of Business Intelligence and Analytics-Based Healthcare Facility Management Key Performance Indicators. Applied Sciences, 12 (2). p. 651. ISSN 2076-3417

Demirdöğen, Gökhan, Işık, Zeynep and Arayici, Yusuf (2020) Lean Management Framework for Healthcare Facilities Integrating BIM, BEPS and Big Data Analytics. Sustainability, 12 (17). p. 7061. ISSN 2071-1050

Dennis, Gareth and Crapper, Martin (2013) Limits for acceptable use of worn rails on UK standard gauge heritage railways. In: Railway Engineering 2013, 9-10 July 2013, London.

Di Schino, Anrea and Corradi, Marco (2020) Construction and building materials. AIMS Materials Science, 7 (2). pp. 157-159. ISSN 2372-0484

Dissanayake Mudiyanselage, Madhushan, Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, K. D. and Wanniarachchi, K. S. (2021) Shear Behaviour of Cold-Formed Stainless Steel Lipped Channels with Reduced Support Restraints. In: ICSECM 2019: Proceedings of the 10th International Conference on Structural Engineering and Construction Management. Lecture Notes in Civil Engineering, 94 . Springer, Singapore, pp. 231-242. ISBN 9789811572210, 9789811572227

Dissanayake Mudiyanselage, Madhushan, Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, K.D., Wanniarachchi, K.S. and Nagaratnam, Brabha (2021) Bending-shear interaction of cold-formed stainless steel lipped channel sections. Structures, 30. pp. 1042-1055. ISSN 2352-0124

Dissanayake Mudiyanselage, Madhushan, Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, K.D., Wanniarachchi, K.S. and Nagaratnam, Brabha (2021) Numerical investigation of cold-formed stainless steel lipped channels with longitudinal stiffeners subjected to shear. Thin-Walled Structures, 158. p. 107179. ISSN 0263-8231

Dissanayake Mudiyanselage, Madhushan, Suntharalingam, Thadshajini, Tsavdaridis, Konstantinos Daniel, Poologanathan, Keerthan and Perampalam, Gatheeshgar (2021) Informed Finite Element Modelling for Wire and Arc Additively Manufactured Metallics—A Case Study on Modular Building Connections. Buildings, 12 (1). p. 5. ISSN 2075-5309

Dissanayake Mudiyanselage, Madhushan, Zhou, C., Poologanathan, Keerthan, Gunalan, S., Tsavdaridis, K.D. and Guss, J. (2021) Numerical simulation and design of stainless steel hollow flange beams under shear. Journal of Constructional Steel Research, 176. p. 106414. ISSN 0143-974X

Doherty, Eamonn, Kelly, Paul and Crapper, Martin (2013) Evaluation of a risk assessment system for heritage railway earthworks. In: Railway Engineering 2013, 9-10 July 2013, London.

Douglas, Allan (2016) The implementation of a management information system for a construction SME: An analysis of decisions anfd their impact. Masters thesis, Northumbria University.

Doukari, Omar, Greenwood, David, Rogage, Kay and Kassem, Mohamad (2022) Object-centred automated compliance checking: a novel, bottom-up approach. Journal of Information Technology in Construction, 27. pp. 335-362. ISSN 1874-4753

Doukari, Omar, Seck, Boubacar and Greenwood, David (2022) The efficient generation of 4D BIM construction schedules: A case study of the Nanterre 2 CESI project in France. Frontiers in Built Environment, 8. p. 998309. ISSN 2297-3362

Duursma, Gail, Crapper, Martin, Whitelaw, S., Wong, WaiSam and McMullan, K. (2009) DEM-CFD Modelling of Voidage and Heat Transfer in Fluidized Beds. In: 8th World Congress of Chemical Engineering (WCCE8), 23-27 August 2009, Montreal.

Dyca, Besmira, Muldoon-Smith, Kevin and Greenhalgh, Paul (2020) Common value: transferring development rights to make room for water. Environmental Science & Policy, 114. pp. 312-320. ISSN 1462-9011

E

Ebrahimi, Mohammadreza and Crapper, Martin (2017) CFD-DEM Simulation of Turbulence Modulation in Horizontal Pneumatic Conveying. Particuology, 31. pp. 15-24. ISSN 1674-2001

Ebrahimi, Mohammadreza and Crapper, Martin (2012) Simulation of dilute horizontal pneumatic conveying with experimental validation (PARDEM Project 8). In: 7th International Conference for Conveying and Handling of Particulate Solids (CHoPS 2012), 10-13 September 2012, Friedrichshafen.

Ebrahimi, Mohammadreza, Crapper, Martin, Edwards, William and Ooi, Jin (2013) Simulation and experimental study of cylindrical particle motion in a two-phase flow. In: 6th International Conference on Discrete Element Methods (DEM6), 5-6 August 2013, Golden, Colorado.

Ebrahimi, Mohammadreza, Crapper, Martin and Ooi, Jin (2014) Experimental and Simulation Studies of Dilute Horizontal Pneumatic Conveying. Particulate Science and Technology, 32 (2). pp. 206-213. ISSN 0272-6351

Ebrahimi, Mohammadreza, Crapper, Martin and Ooi, Jin (2016) Numerical and experimental study of horizontal pneumatic transportation of spherical and low-aspect-ratio cylindrical particles. Powder Technology, 293. pp. 48-59. ISSN 0032-5910

Ebrahimi, Mohammadreza, Gupta, Prashant, Robinson, Martin, Crapper, Martin, Ramaioli, Marco and Ooi, Jin (2013) Comparison of coupled DEM-CFD and SPH-DEM methods in single and multiple particle sedimentation test cases. In: 3rd International Conference on Particle-Based Methods, 18-20 September 2013, Stuttgart.

Edmondson, Vikki, Ardill, Owen, Martin, James, Lim, Michael, Kane, Malal and Woodward, John (2022) Quantifying long-term rates of texture change on road networks. International Journal of Pavement Engineering, 23 (6). pp. 1957-1969. ISSN 1029-8436

Edmondson, Vikki, Martin, James, Ardill, Owen, Lim, Michael, Kane, Malal and Woodward, John (2021) Seasonal Signals Observed in Non-Contact Long-Term Road Texture Measurements. Coatings, 11 (6). p. 735. ISSN 2079-6412

Edmondson, Vikki and Sheratt, Fred (2022) Engineering judgement in undergraduate structural design education: Enhancing learning with failure case studies. European Journal of Engineering Education, 47 (4). pp. 577-590. ISSN 0304-3797

Edmondson, Vikki, Sherratt, Fred, Roff, Richard and Levett, Andy (2017) Advancing tunnelling: recognising a UK engineering legacy. Proceedings of the Institution of Civil Engineers - Forensic Engineering, 170 (4). pp. 191-199. ISSN 2043-9903

Edmondson, Vikki, Sherratt, Fred, Roff, Richard and Levett, Andy (2018) Advancing tunnelling: the Victorian engineering management legacy. Proceedings of the Institution of Civil Engineers - Forensic Engineering, 171 (2). pp. 49-57. ISSN 2043-9903

El Hasadi, Yousef and Crapper, Martin (2017) Self – Propelled Nanofluids a Path to a highly Effective Coolant. Applied Thermal Engineering, 127. pp. 857-869. ISSN 1359-4311

El Hasadi, Yousef and Crapper, Martin (2016) Simulating the Hydrodynamics of Self-Propelled Colloidal Clusters using Stokesian Dynamics. Biomicrofluidics, 10 (6). ISSN 1932-1058

ElBanhawy, Eiman, Dalton, Ruth and Nassar, Khaled (2013) Integrating space-syntax and discrete-event simulation for e-mobility analysis. In: AEI 2013: Building Solutions for Architectural Engineering. American Society of Civil Engineers, Reston, VA, pp. 934-945. ISBN 9780784412909

F

Fallahian, Farhad, Rahimian, Farzad Pour and Ibrahim, Rahinah (2012) Alignment problems of timber production in architecture-engineering-construction projects in Malaysia. In: 2nd International Conference on Socio-Political and Technological Dimensions of Climate Change, Hotel-Marriott Putrajaya: Co-Organised by University Putra Malaysia (UPM) and University of Central Lancashire (UCLan). Universiti Putra Malaysia Press, pp. 136-147. ISBN 9789679603279

Fang, Cheng, Zhou, Xiaoyi, Osofero, Israel, Shu, Zhan and Corradi, Marco (2016) Superelastic SMA Belleville washers for seismic resisting applications: experimental study and modelling strategy. Smart Materials and Structures, 25 (10). p. 105013. ISSN 0964-1726

Fareed, Ishqy, Wanniarachchi, Somadasa, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Perampalam, Gatheeshgar and Rajanayagam, Heshachanaa (2021) Shear Capacity of Cold-Formed Stainless Steel Beam with Elliptical Web Openings: Numerical Analyses. In: Proceedings of the 10th International Conference on Structural Engineering and Construction Management 2019 (ICSECM). University of Peradeniya, Kandy, Sri Lanka, pp. 216-225. ISBN 9789555892742

Fareed, Ishqy, Wanniarachchi, Somadasa, Poologanathan, Keerthan, Gunalan, Shanmuganathan, Perampalam, Gatheeshgar and Rajanayagam, Heshachanaa (2021) Web Crippling Behaviour of Cold-Formed Stainless Steel LCB with Non-Circular Web Opening Under ETF Load Case. In: Proceedings of the 10th International Conference on Structural Engineering and Construction Management 2019 (ICSECM). University of Peradeniya, Kandy, Sri Lanka, pp. 226-234. ISBN 9789555892742

Farhad, Farnoosh, Smyth-Boyle, David and Zhang, Xiang (2021) Fatigue of X65 steel in the sour corrosive environment—A novel experimentation and analysis method for predicting fatigue crack initiation life from corrosion pits. Fatigue and Fracture of Engineering Materials and Structures, 44 (5). pp. 1195-1208. ISSN 8756-758X

Farrell, Peter, Sheratt, Fred and Richardson, Alan (2016) Laboratory experiments for dissertations and projects. In: Writing Built Environment Dissertations and Projects: Practical Guidance and Examples, 2nd edition. Wiley-Blackwell, Oxford, pp. 140-164. ISBN 9781118921920

Florez Perez, Laura and Castro-Lacouture, Daniel (2014) Optimal Crew Design for Masonry Construction Projects Considering Contractors' Requirements and Workers' Needs. In: Construction Research Congress 2014. American Society of Civil Engineers, pp. 1149-1158. ISBN 9780784413517

Forrester, John, Cook, Brian, Bracken, Louise J., Cinderby, Steve and Donaldson, Andrew (2015) Combining participatory mapping with Q-methodology to map stakeholder perceptions of complex environmental problems. Applied Geography, 56. pp. 199-208. ISSN 0143-6228

Foster-Smith, Lydia, Walsh, Sinead, Crapper, Martin and Sherratt, Fred (2014) Safety and volunteer construction workers. In: Proceedings 30th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-0-9552390-8-3

Fu, Yichuan, Gao, Zhiwei, Liu, Yuanhong, Zhang, Aihua and Yin, Xiuxia (2020) Actuator and Sensor Fault Classification for Wind Turbine Systems Based on Fast Fourier Transform and Uncorrelated Multi-Linear Principal Component Analysis Techniques. Processes, 8 (9). p. 1066. ISSN 2227-9717

Furber, Alison and Crapper, Martin (2011) Culture in Rural Water and Sanitation Projects: a Case Study. In: 35th WEDC International Conference, 6-8 July 2011, Loughborough.

Furber, Alison, Duncan, Sarah, Smith, Simon David and Crapper, Martin (2012) The health and safety implications of socio-cultural context for community construction projects in developing countries. Construction Management and Economics, 30 (10). pp. 857-867. ISSN 0144-6193

Furber, Alison, Gillie, Martin, Bisby, Luke, Stratford, Timothy, Crapper, Martin, White, Douglas and Blackford, Jane (2014) Innovative learning at the University of Edinburgh. Proceedings of the ICE - Management, Procurement and Law, 167 (1). pp. 13-24. ISSN 1751-4304

Furber, Alison, Smith, Simon David and Crapper, Martin (2012) A case study of the impact of cultural differences during a construction project in Ghana. In: Proceedings 28th Annual ARCOM Conference. ARCOM, pp. 553-562. ISBN 978-0-9552390-6-9

G

Ganjehlou, Hamed Ganjeh, Niaei, Hadi, Jafari, Amirreza, Aroko, Daniel, Marzband, Mousa and Fernando, Terrence (2020) A Novel Techno-Economic Multi-Level Optimization in Home-Microgrids with Coalition Formation Capability. Sustainable Cities and Society, 60. p. 102241. ISSN 2210-6707

Gao, Zhiwei and Liu, Xiaoxu (2021) An Overview on Fault Diagnosis, Prognosis and Resilient Control for Wind Turbine Systems. Processes, 9 (2). p. 300. ISSN 2227-9717

Gholinejad, Hamid Reza, Adabi, Jafar and Marzband, Mousa (2021) An Energy management system structure for Neighborhood Networks. Journal of Building Engineering, 41. p. 102376. ISSN 2352-7102

Giaccone, Domenico, Santamaria, Ulderico and Corradi, Marco (2020) An Experimental Study on the Effect of Water on Historic Brickwork Masonry. Heritage, 3 (1). pp. 29-46. ISSN 2571-9408

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2015) A realistic FDTD numerical modeling framework of ground penetrating radar for landmine detection. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 9 (1). pp. 37-51. ISSN 1939-1404

Giannakis, Iraklis, Giannopoulos, Antonios, Warren, Craig and Davidson, Nigel (2015) Numerical modelling and neural networks for landmine detection using ground penetrating radar. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Gillie, Martin, Stratford, Tim, Crapper, Martin and Furber, Alison (2014) Teaching Skills for Conceptual Design - A New Approach. In: 5th International Symposium for Engineering Education (ISEE) 2014, 11-12 September 2014, Manchester.

Ginige, Kanchana, Mendis, Kalindu and Thayaparan, Menaha (2022) An Assessment of Structural Measures for Risk Reduction of Hydrometeorological Disasters in Sri Lanka. Progress in Disaster Science, 14. p. 100232. ISSN 2590-0617

Gledson, Barry (2016) Exploring the Consequences of 4D BIM Innovation Adoption. In: Proceedings of the 32nd Annual ARCOM Conference, 5th - 7th September 2016, Manchester, UK.

Gledson, Barry (2015) Investigating the diffusion of 4D BIM Innovation. In: Proceedings 31st Annual ARCOM Conference, 7th - 9th September 2015, Lincoln.

Gledson, Barry and Dawson, Susan (2017) Use of Simulation Through BIM-Enabled Virtual Projects to Enhance Learning and Soft Employability Skills in Architectural Technology Education. In: Building Information Modelling, Building Performance, Design and Smart Construction. Springer, Switzerland, pp. 79-92. ISBN 9783319503455

Gledson, Barry and Dawson, Susan (2016) Use of simulation through BIM-enabled Virtual Projects to enhance learning and soft employability skills in Architectural Technology education. In: International SEEDS Conference 2016, 14th - 15th September 2016, Leeds, UK.

Gledson, Barry and Downs, Maddy (2017) Examining vignettes in AEC research – how are they used, and what are they good for? In: 3rd International Sustainable Ecological Engineering Design for Society (SEEDS) Conference, 13th -14th September 2017, Leeds.

Gledson, Barry and Greenwood, David (2016) Surveying the extent and use of 4D BIM in the UK. Journal of Information Technology in Construction (ITcon), 21. pp. 57-71. ISSN 1874-4753

Gledson, Barry, Greenwood, David, Routledge, Peter, Watson, Richard and Woddy, Paul (2016) Preparing to work in level 2 BIM: an innovative approach to a training and educational need. In: 1st International UK BIM Academic Forum Conference, September 13th-15th, 2016, Glasgow Caledonian University.

Gledson, Barry, Greenwood, David and Thurairajah, Niraj (2020) Various definitions provided for use in OUP Dictionary of Building Construction, Surveying and Civil Engineering 2nd Edition (i..e GLEDSON proposed 35 definitions). In: A dictionary of construction, surveying, and civil engineering. Oxford University Press, Oxford. ISBN 9780198832485, 9780191871061, 9780192568632

Gledson, Barry, Hilton, Daniel and Rogage, Kay (2016) Benchmarking BIM Levels of Training and Education amongst Construction Management Practitioners. In: Proceedings of the 32nd Annual ARCOM Conference, 5th - 7th September 2016, Manchester, UK.

Glendinning, Stephanie, Hughes, Paul, Helm, Peter, Chambers, Jonathan, Mendes, Joao, Gunn, David, Wilkinson, Paul and Uhlemann, Sebastien (2014) Construction, management and maintenance of embankments used for road and rail infrastructure: implications of weather induced pore water pressures. Acta Geotechnica, 9 (5). pp. 799-816. ISSN 1861-1125

Golabchi, Alireza, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2021) A simulation-based decision-support system for integration of human cognition into construction operation planning. In: Proceedings of the 20th International Conference on Modeling & Applied Simulation. Proceedings of the International Conference on Modelling and Applied Simulation . CAL-TEK, Rende, Italy, pp. 38-47. ISBN 9788885741614

Gomes, Helena I., Funari, Valerio, Mayes, William M., Rogerson, Michael and Prior, Timothy J. (2018) Recovery of Al, Cr and V from steel slag by bioleaching: Batch and column experiments. Journal of Environmental Management, 222. pp. 30-36. ISSN 0301-4797

Gomes, Helena I., Mayes, William M., Baxter, Helen A., Jarvis, Adam P., Burke, Ian T., Stewart, Douglas I. and Rogerson, Michael (2018) Options for managing alkaline steel slag leachate: A life cycle assessment. Journal of Cleaner Production, 202. pp. 401-412. ISSN 0959-6526

Gouda, M. M., Danaher, Sean and Underwood, Chris (2002) Building thermal model reduction using nonlinear constrained optimization. Building and Environment, 37 (12). pp. 1255-1265. ISSN 0360-1323

Gouda, M. M., Danaher, Sean and Underwood, Chris (2001) Thermal comfort based fuzzy logic control. Building Services Engineering Research and Technology, 22 (4). pp. 237-253. ISSN 0143-6244

Goulding, Jack and Rahimian, Farzad Pour (2011) A game-like virtual reality construction site simulator for non-collocated collaboration in AEC environments. In: 11th International Conference on Construction Applications for Virtual Reality, 3-4 November 2011, Weimar.

Graham, D., Smith, Simon D. and Crapper, Martin (2006) Refining the case-based reasoning model of construction processes. In: Proceedings 22nd Annual ARCOM Conference. ARCOM, pp. 135-142. ISBN 0 9552390 0 1

Graham, Darren, Smith, Simon David and Crapper, Martin (2004) Improving concrete placement simulation with a case-based reasoning input. Civil Engineering and Environmental Systems, 21 (2). pp. 137-150. ISSN 1028-6608

Grant, James, Pesce, Giovanni, Ball, Richard, Molinari, M. and Parker, Stephen (2016) An experimental and computational study to resolve the composition of dolomitic lime. RSC Advances, 6 (19). pp. 16066-16072. ISSN 2046-2069

Greenwood, David (2002) Achieving best value in construction through non-traditional procurement methods. In: CIB W65 Conference, January 2002, University of Trinidad.

Greenwood, David (2000) Adjudication in contracts: results of a subcontract survey. In: The Construction Act: Time for Review. Construction Law Press. ISBN 9781902814001

Greenwood, David (2017) Building Information Modelling and Management. In: Advances in Construction ICT and e-Business. Taylor & Francis, Abingdon, pp. 87-105. ISBN 9781138914582

Greenwood, David (2000) Construction Contracts. In: Croner's Construction Management Handbook. Croner Publications.

Greenwood, David (1992) Contractual Arrangements and Conditions of Contract for the engagement of Specialist Engineering Contractors for Construction Projects. Project Report. CASEC Publications.

Greenwood, David (2000) DOM/1&2 and the ICE Form of Subcontract. In: Tolleys Guide to Construction Contracts. Tolley Publishing.

Greenwood, David (2005) Partnering in action: the case of the North Tyneside Partnering Agreement. In: CIB W92/T23/W107 International Symposium on Procurement Systems, 7-10 February 2005, Las Vegas.

Greenwood, David (1993) Price determination and conflict in construction. In: Proceedings of the 9th Annual ARCOM Conference. Association of Researchers in Construction Management.

Greenwood, David (2002) Proceedings of the 18th Annual ARCOM Conference 2-4 September 2002, University of Northumbria. Association of Researchers in Construction Management.

Greenwood, David (2003) Proceedings of the 19th Annual ARCOM Conference, 3-5 September 2003, Brighton University. Association of Researchers in Construction Management.

Greenwood, David (2003) Section G2: GC/Works contracts. In: Tolleys Guide to Construction Contracts. Tolley Publishing.

Greenwood, David (1999) The Sub-Contractor. In: Tolleys Guide to Construction Contracts. Tolley Publishing.

Greenwood, David (2001) Subcontract procurement: are relationships changing? Construction Management and Economics, 19 (1). pp. 5-7. ISSN 0144-6193

Greenwood, David and Davies, A. (1994) A proposed new approach to elemental cost analysis for designers and builders. In: Proceedings of the 10th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-1898633051

Greenwood, David and Fan, Chi Wai (2001) The analysis and evaluation of construction delays: Testing a new method using a mixture of case study data and simulation. Construction Information Quarterly. ISSN 1469-4891

Greenwood, David, Johansen, Eric and Maguire, S. (1996) Planning on Medium-sized construction Projects. In: Proceedings of the 12th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-0863396601

Greenwood, David and Klein, S. R. (2001) The impact of the HGCR Act on Subcontract Formation: results of some early research. Construction Law Journal, 17 (2). pp. 122-126. ISSN 0267-2359

Greenwood, David and Li, Hua (2000) Technology transfer on international joint venture projects in China. In: Proceedings of the 16th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-0953416141

Greenwood, David, Lockley, Steve, Malsane, S. and Matthews, Jane (2010) Automated compliance checking using building information models. In: RICS COBRA 2010 Conference, 2-3 September, Paris.

Greenwood, David, Osborne, Allan and Aggiag, Mohamed Abd (2001) A comparative analysis of administrative delays in hospital buildings. In: Proceedings 17th Annual ARCOM Conference. Association of Researchers in Construction Management, pp. 795-802. ISBN 0 9534161 6 X

Greenwood, David, Osborne, Allan and Maguire, S. (1995) A comparative analysis of inter-organisational conflict in the UK construction industry. In: Proceedings of the 11th Annual ARCOM Conference. Association of Researchers in Construction Management.

Greenwood, David, Saunders, D. and Stitt, D. (2003) Improving Construction: Review of Progress, Lessons Learned and Conclusions. Construction Information Quarterly, 5 (2). pp. 1-5. ISSN 1469-4891

Greenwood, David, Scott, S. and Stitt, D. (2001) Improving construction. Construction Information Quarterly, 3 (1). pp. 20-22. ISSN 1469-4891

Greenwood, David and Shaglouf, A. (1997) Comparison between Planned and Actual Durations in Medium-sized Building Projects. In: Proceedings of the 13th Annual ARCOM Conference. Association of Researchers in Construction Management. ISBN 978-0863397592

Greenwood, David and Steel, Glenn (2002) Monitoring the implementation of a performance measurement system in local authority repairs and maintenance services. Project Report. Northumbria University.

Greenwood, David and Wu, Shuwei (2012) Establishing the association between collaborative working and construction project performance based upon client and contractor perceptions. Construction Management and Economics, 30 (4). pp. 299-308. ISSN 0144-6193

Griffiths, Alan and Howarth, Tim (2001) Construction health and safety management. Longman, Harlow. ISBN 9780582414426

Griffiths, Simon and Stewart-Evans, Jim (2010) Fly-tipping of hazardous wastes. Chemical Hazards and Poisons Report, 16. pp. 20-23. ISSN 1745-3763

Guan, Zhongwei, Vo, Thuc and Cantwell, Wesley (2011) Modelling blast response of fibre metal laminates. In: 4th ICMEM International Conference on Mechanical Engineering and Mechanics (ICMEM 2011), China.

H

Hafez, Hisham, Kurda, Rawaz, Al-Ayish, Nadia, Garcia-Segura, Tatiana, Cheung, Wai Ming and Nagaratnam, Brabha (2021) A whole life cycle performance-based ECOnomic and ECOlogical assessment framework (ECO2) for concrete sustainability. Journal of Cleaner Production, 292. p. 126060. ISSN 0959-6526

Haghbin, Masoud, Sharafati, Ahmad and Motta, Davide (2021) Prediction of channel sinuosity in perennial rivers using Bayesian Mutual Information theory and support vector regression coupled with meta-heuristic algorithms. Earth Science Informatics, 14 (4). pp. 2279-2292. ISSN 1865-0473

Haile, Fitsum, Adkins, Jill and Corradi, Marco (2022) A Review of the Use of Titanium for Reinforcement of Masonry Structures. Materials, 15 (13). p. 4561. ISSN 1996-1944

Hao, Zhenyang, Cao, Xin, Deng, Xu and Shen, Xiang (2020) Novel Bearingless Switched Reluctance Motor with Wide Flat Inductance Region to Simplify the Control of Torque and Levitation Force. IEEE Transactions on Energy Conversion, 35 (3). pp. 1278-1288. ISSN 0885-8969

Haznedar, Bulent, Bayraktar, Rabia, Ozturk, Ali Emre and Arayici, Yusuf (2023) Implementing PointNet for point cloud segmentation in the heritage context. Heritage Science, 11 (1). p. 2. ISSN 2050-7445

Heniegal, Ashraf M., Richardson, Alan and Ibrahim, Omar Mohamed Omar (2020) Enhancement of concrete surface by coating with cement-based alkaline activator. SN Applied Sciences, 2 (5). p. 859. ISSN 2523-3963

Hepple, Ryan, Yang, Siliang, Khattak, Sanober, Qian, Zi and Prasad, Deo (2022) Comparative Analysis of CIBSE Admittance and ASHRAE Radiant Time Series Cooling Load Models. CivilEng, 3 (2). pp. 468-479. ISSN 2673-4109

Hobson, Andrew J., Stewart, Douglas I., Bray, Andrew W., Mortimer, Robert J. G., Mayes, William M., Rogerson, Michael and Burke, Ian T. (2017) Mechanism of Vanadium Leaching during Surface Weathering of Basic Oxygen Furnace Steel Slag Blocks: A Microfocus X-ray Absorption Spectroscopy and Electron Microscopy Study. Environmental Science & Technology, 51 (14). pp. 7823-7830. ISSN 0013-936X

Hobson, Andrew J., Stewart, Douglas I., Bray, Andrew W., Mortimer, Robert J.G., Mayes, William M., Riley, Alex L., Rogerson, Michael and Burke, Ian T. (2018) Behaviour and fate of vanadium during the aerobic neutralisation of hyperalkaline slag leachate. Science of the Total Environment, 643. pp. 1191-1199. ISSN 0048-9697

Hobson, Andrew J., Stewart, Douglas I., Mortimer, Robert J.G., Mayes, William M., Rogerson, Michael and Burke, Ian T. (2018) Leaching behaviour of co-disposed steel making wastes: Effects of aeration on leachate chemistry and vanadium mobilisation. Waste Management, 81. pp. 1-10. ISSN 0956-053X

Hore, Alan, McAuley, Barry, West, Roger, Kassem, Mohamad and Kuang, Shiyao (2017) Ireland’s BIM Macro Adoption Study: Establishing Ireland’s BIM Maturity. In: CitA BIM Gathering Conference 2017. The Construction IT Alliance, pp. 32-40. ISBN 397809573957-2-6

Hounkpe, Sena, Adjovi, Edmond, Crapper, Martin and Aina, Martin (2013) Mise au point d'un systeme integre de gestion des eaux usees. Revue Ivorienne Sciences et Technologie (REVIST), 21/22. pp. 167-186. ISSN 1813-3290

Hounkpe, Sena, Adjovi, Edmond, Crapper, Martin and Awuah, Esi (2014) Wastewater Management in Third World Cities: Case Study of Cotonou, Benin. Journal of Environmental Protection, 05 (05). pp. 387-399. ISSN 2152-2197

Hounkpe, Sena, Aina, Martin, Crapper, Martin, Adjovi, Edmond and Mama, Daouda (2013) Influence of Salinity on Duckweed Growth and Duckweed Based Wastewater Treatment System. Journal of Water Resource and Protection, 5 (10). pp. 993-999. ISSN 1945-3094

Howarth, Tim and Greenwood, David (2017) Construction Quality Management: Principles and Practice [2nd ed.]. Taylor & Francis, Abingdon. ISBN 9781138680104

Hughes, P. N., Glendinning, S., Mendes, Joao, Parkin, G., Toll, D. G., Gallipoli, D. and Miller, P. E. (2009) Full-scale testing to assess climate effects on embankments. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 162 (2). pp. 67-79. ISSN 1478-4629

Hughes, W. P. and Greenwood, David (1996) The standardisation of Contracts for Construction. International Construction Law Review, 13 (2). pp. 196-206. ISSN 0265-1416

Hughes, Will, Greenwood, David and Hillebrandt, Patricia (2005) Impact of procurement method on costs of procurement. In: 11th Joint CIB International Symposium – Combining Forces - Advancing Facilities Management and Construction through Innovation, 13-16 June 2005, Helsinki.

Hughes, Will, Hillebrandt, Patricia, Greenwood, David and Kwawu, W. (2002) Developing a system for assessing the costs associated with different procurement routes in the construction industry. In: CIB W-65 Organization and Management in Construction, 9-13 September 2002, Cincinnati.

Hughes, Will, Hillebrandt, Patricia, Lingard, Helen and Greenwood, David (2000) The impact of market and supply configurations on the costs of tendering in the construction industry. In: CIB W055 and W065, 15th September 2000, Reading.

Hughes, Will, Hillebrandt, Patricia, Lingard, Helen and Greenwood, David (2001) The impact of market and supply configurations on the costs of tendering in the construction industry. In: CIB World Building Congress, 2-6 April 2000, Wellington.

Hussain, Shahid, Maqbool, Rashid, Hussain, Ammar and Ashfaq, Saleha (2022) Assessing the Socio-Economic Impacts of Rural Infrastructure Projects on Community Development. Buildings, 12 (7). p. 947. ISSN 2075-5309

I

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Experimental and numerical investigations of CFRP strengthened short SHS steel columns. Engineering Structures, 175. pp. 879-894. ISSN 0141-0296

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Heat transfer modelling of CFRP strengthened and insulated steel tubular columns. Construction and Building Materials, 184. pp. 278-294. ISSN 0950-0618

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Mechanical properties of cold-formed steel tubular sections at elevated temperatures. Journal of Constructional Steel Research, 143. pp. 131-147. ISSN 0143-974X

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127. pp. 534-545. ISSN 0017-9310

J

Jamali, Armin, Mendes, Joao, Nagaratnam, Brabha and Lim, Michael (2022) A new four stage model of capillary pressure in early age concrete: Insights from high capacity tensiometers. Cement and Concrete Research, 161. p. 106955. ISSN 0008-8846

Jangi, Mehdi and Dlugogorski, Bogdan (2017) On wall fire interaction in a small pool fire: A large-eddy simulation study. Fire Safety Journal, 92. pp. 199-209. ISSN 0379-7112

Jewers, Sam, Lumsden, Sarah, Crapper, Martin, French, Wendy, Lothian, Aileen, Donald, Ross, Hill, David and Hall, Alex (2010) Education for Sustainable Development and Civil Engineering for Children: Interactive Model Case Study. Journal of Professional Issues in Engineering Education and Practice, 136 (3). pp. 165-174. ISSN 1052-3928

Jiang, Yunhong, Hussain, Atif, Heidari, Davoud M., Lawrence, Michael and Ansell, Martin (2020) Physico-chemical Characterization and Development of Hemp Aggregates for Highly Insulating Construction Building Materials. In: Sustainable Agriculture Reviews 42 : Hemp Production and Applications. Sustainable Agriculture Reviews (42). Springer, Cham, pp. 147-170. ISBN 9783030413835, 9783030413842

Jowett, Benjamin Richard (2024) A framework for the implementation of mobile BIM technology at project and organisational level supporting lean construction approaches. Doctoral thesis, Northumbria University.

K

KANE, Malal, Lim, Michael, DO, Minh-Tan and Edmondson, Vikki (2022) A New Predictive Skid Resistance Model (Psrm) for Pavement Evolution Due to Texture Polishing by Traffic. SSRN Electronic Journal. pp. 1-24. ISSN 1556-5068 (Submitted)

Kane, Malal and Edmondson, Vikki (2020) Aggregates mineralogical composition dataset to estimate the Averaged Aggregate Hardness Parameter to predict the Long-Term Skid Resistance of pavements. Data in Brief, 31. p. 105849. ISSN 2352-3409

Kane, Malal and Edmondson, Vikki (2022) Skid Resistance: Understanding the Role of Road Texture Scales using a Signal Decomposition Technique and a Friction Model. International Journal of Pavement Engineering, 23 (2). pp. 499-513. ISSN 1029-8436

Kanthasamy, Elilarasi, Chandramohan, Dinesh Lakshmanan, Shanmuganathan, Gunalan, Poologanathan, Keerthan, Gatheeshgar, Perampalam, Corradi, Marco and Mcintosh, Alex (2022) Web crippling behaviour of cold-formed high-strength steel unlipped channel beams under End-One-Flange load case. Case Studies in Construction Materials, 16. e01022. ISSN 2214-5095

Kashiwagi, D., Savicky, J., Sullivan, K., Kovel, J., Greenwood, David and Egbu, C. (2005) Is Performance Based Procurement a Solution to Construction Performance? In: 11th Joint CIB International Symposium – Combining Forces - Advancing Facilities Management and Construction through Innovation, 13-16 June 2005, Helsinki.

Kashiwagi, Dean, Sullivan, Kenneth, Greenwood, David, Kovell, Jacob and Egbu, Charles (2005) Source of construction industry instability and performance problems. In: Construction Research Congress 2005. American Society of Civil Engineers, pp. 807-816. ISBN 978-0-7844-0754-7

Kassem, Mohamad, Dawood, Nashwan and Chavada, Rajiv (2015) Construction workspace management within an Industry Foundation Class-Compliant 4D tool. Automation in Construction, 52. pp. 42-58. ISSN 0926-5805

Kazemi-Razi, S. Mahdi, Askarian Abyaneh, Hossein, Nafisi, Hamed, Ali, Zunaib and Marzband, Mousa (2021) Enhancement of flexibility in multi-energy microgrids considering voltage and congestion improvement: Robust thermal comfort against reserve calls. Sustainable Cities and Society, 74. p. 103160. ISSN 2210-6707

Khajenoori, Leila, Wright, Grant and Crapper, Martin (2017) Simulating Geobag Revement Failure Processes. In: 37th IAHR World Congress, 13th - 18th August 2017, Kuala Lumpur, Malaysia.

Khalid, Muhammad, Wang, Liang, Wang, Kezhi, Aslam, Nauman, Pan, Cunhua and Cao, Yue (2023) Deep reinforcement learning-based long-range autonomous valet parking for smart cities. Sustainable Cities and Society, 89. p. 104311. ISSN 2210-6707

Kim, Hando, Benghi, Claudio, Dawood, Nashwan, Jung, Doyoung, Kim, Jaehong and Baek, Yeongin (2010) Developing 5D system connecting cost, schedule and 3D model. In: IABSE Symposium Symposium on Large Structures and Infrastructures for Environmentally Constrained and Urbanised Areas, 22-24 September 2010, Venice, Italy.

Kirillov, Oleg and Pelinovsky, Dmitry (2014) Nonlinear Physical Systems: Spectral Analysis, Stability and Bifurcations. Wiley, London. ISBN 9781848214200

Kirton, Paula, Richardson, Alan and Agnew, Brian (2013) Thermo-mechanical performance of concrete with alternative binder material. Structural Survey, 31 (5). pp. 368-386. ISSN 0263-080X

L

Lan, Zhenyu, Dai, Jun, Hu, Xiang, Dai, Xuewu, Xing, Minghai and Chen, Liangyin (2022) Wind power ramp detection algorithms based on slope point correction. In: 2022 27th International Conference on Automation and Computing (ICAC): Bristol, United Kingdom, 1-3 September 2022. IEEE, Piscataway, NJ, pp. 609-614. ISBN 9781665498081, 9781665498074

Lanc, Domagoj, Turkalj, Goran, Vo, Thuc and Brnić, Josip (2016) Nonlinear buckling behaviours of thin-walled functionally graded open section beams. Composite Structures, 152. pp. 829-839. ISSN 0263-8223

Lanc, Domagoj, Vo, Thuc, Turkalj, Goran and Lee, Jaehong (2015) Buckling analysis of thin-walled functionally graded sandwich box beams. Thin-Walled Structures, 86. 148 - 156. ISSN 0263-8231

Leal Filho, Walter, Abubakar, Ismaila Rimi, Kotter, Richard, Grindsted, Thomas Skou, Balogun, Abdul-Lateef, Salvia, Amanda Lange, Aina, Yusuf A. and Wolf, Franziska (2021) Framing Electric Mobility for Urban Sustainability in a Circular Economy Context: An Overview of the Literature. Sustainability, 13 (14). p. 7786. ISSN 2071-1050

Leblouba, Moussa, Al Toubat, Salah, Rahman, Muhammad and Mugheida, Omer (2016) Practical Soil-Shallow Foundation Model for Nonlinear Structural Analysis. Mathematical Problems in Engineering, 2016. p. 4514152. ISSN 1024-123X

Lerbet, Jean, Aldowaji, Marwa, Challamel, Noël, Kirillov, Oleg, Nicot, François and Darve, Félix (2014) Geometric degree of nonconservativity. Mathematics and Mechanics of Complex Systems, 2 (2). pp. 123-139. ISSN 2326-7186

Lerbet, Jean, Kirillov, Oleg, Aldowaji, Marwa, Challamel, Noël, Nicot, François and Darve, Félix (2013) Additional constraints may soften a non-conservative structural system: Buckling and vibration analysis. International Journal of Solids and Structures, 50 (2). pp. 363-370. ISSN 0020-7683

Lewis, D., Bradbury, Steve and Sarwar, Mohammed (1996) Analysis of the wear and failure mechanisms that develop in high speed steel circular saw blades when machining nickel-based alloys. Wear, 197 (1-2). pp. 74-81. ISSN 0043-1648

Lewis, Simon J. and Greenwood, David (2002) The treatment of risk in construction contracts under PFI/PPP. In: Proceedings of the 18th Annual ARCOM Conference. Association of Researchers in Construction Management, pp. 415-423.

Leyendecker, Katja (2019) Call to action: towards a practice of inclusive road safety. Municipal Engineer, 172 (1). pp. 10-17. ISSN 0965-0903

Leyendecker, Katja (2016) "Mobility patterns and urban structure" [Book Review]. URBAN DESIGN International, 21 (3). pp. 276-277. ISSN 1357-5317

Li, Handong, Dai, Xuewu, Kotter, Richard, Aslam, Nauman and Cao, Yue (2022) A Simulation Environment of Solar-Wind Powered Electric Vehicle Car Park for Reinforcement Learning and Optimization. In: The 3rd International Symposium on New Energy and Electrical Technology ISNEET 2022. Lecture Notes in Electrical Engineering . Springer, Cham, pp. 1-6. (In Press)

Li, Haoran, Gao, Bin, Lu, Xiaolong, Zhang, Xiyuan, Shi, Yunhan, Ru, Gaige and Woo, Wai Lok (2023) Dynamic Rail Near-Surface Inspection of Multiphysical Coupled Electromagnetic and Thermography Sensing System. IEEE Transactions on Instrumentation and Measurement, 72. p. 3501613. ISSN 0018-9456

Li, Ping, Postlethwaite, Ian, Prempain, Emmanuel, Ulanicki, Bogumil and Patel, Ridwan (2009) Identification of the hydraulic model from operational measurements for supervisory pressure control. In: American Society of Civil Engineers’ Environmental & Water Resources Institute Congress 2009, 17-21 May 2009, Kansas City, Missouri.

Li, Shuo, Blythe, Phil, Zhang, Yanghanzi, Edwards, Simon, Guo, Weihong, Ji, Yanjie, Goodman, Paul, Hill, Graeme and Namdeo, Anil (2022) Analysing the effect of gender on the human–machine interaction in level 3 automated vehicles. Scientific Reports, 12 (1). p. 11645. ISSN 2045-2322

Li, Yipeng, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2021) Data-Driven Simulation Approach for Short-Term Planning of Winter Highway Maintenance Operations. Journal of Computing in Civil Engineering, 35 (5). 04021013. ISSN 0887-3801

Lievesley, Matthew and Dale, J. (2001) ABS centraliser. [Artefact]

Lim, J. B. P., King, C. M., Rathbone, A. J., Davies, J. M. and Edmondson, Vikki (2005) Eurocode 3 and the in-plane stability of portal frames. The Structural Engineer, 83 (21). pp. 43-49.

Lin, Zi and Liu, Xiaolei (2020) Wind power forecasting of an offshore wind turbine based on high-frequency SCADA data and deep learning neural network. Energy, 201. p. 117693. ISSN 0360-5442

Liu, Henry, E.D. Love, Peter, Zhao, Jianfeng, Lemckert, Charles and Muldoon-Smith, Kevin (2021) Transport Infrastructure Asset Resilience: Managing Government Capabilities. Transportation Research, Part D: Transport and Environment, 100. p. 103072. ISSN 1361-9209

Liu, Henry, Love, Peter, Smith, Jim, Irani, Zahir, Hajli, Nick and Sing, Michael (2018) From Design to Operations: A Process Management Life-Cycle Performance Measurement System for Public-Private Partnerships. Production Planning & Control, 29 (1). pp. 68-83. ISSN 0953-7287

Liu, Jie, Crapper, Martin and McConnachie, Gordon (2004) An accurate approach to the design of channel hydraulic flocculators. Water Research, 38 (4). pp. 875-886. ISSN 0043-1354

Lou, T. J., Greenwood, David and Rogage, Kay (2016) An investigation into “Lean-BIM” synergies in the UK Construction Industry. In: First International Conference of the BIM Academic Forum, 13-15 September 2016, Glasgow.

Love, Peter, Irani, Zahir, Smith, Jim, Regan, Michael and Liu, Henry (2017) Cost Performance of Public Infrastructure Projects: The Nemesis and Nirvana of Change-Orders. Production Planning & Control, 28 (13). pp. 1081-1092. ISSN 1366-5871

Love, Peter, Liu, Henry, Matthews, Jane, Sing, Chun-Pong and Smith, Jim (2015) Future proofing PPPs: Life-cycle performance measurement and Building Information Modelling. Automation in Construction, 56. pp. 26-35. ISSN 0926-5805

Lu, Yong, Glass, Donald, Easson, William and Crapper, Martin (2008) Investigation of Flow Patterns of Gas-Solid Granular Flow over Horizontal Pipe Cross-sections by FLUENT & EDEM. In: Particulate Systems Analysis 2008, 2-4 September 2008, Stratford-upon-Avon.

Luhar, Salmabanu, Suntharalingam, Thadshajini, Navaratnam, Satheeskumar, Luhar, Ismail, Thamboo, Julian, Poologanathan, Keerthan and Perampalam, Gatheeshgar (2020) Sustainable and Renewable Bio-Based Natural Fibres and Its Application for 3D Printed Concrete: A Review. Sustainability, 12 (24). p. 10485. ISSN 2071-1050

M

Ma, Jie, Tse, Ying Kei, Wang, Xiaojun and Zhang, Minhao (2019) Examining customer perception and behaviour through social media research – An empirical study of the United Airlines overbooking crisis. Transportation Research Part E: Logistics and Transportation Review, 127. pp. 192-205. ISSN 1366-5545

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Exploring knowledge management principles for decision- making in low-energy building for sustainability in construction. In: CIB International Conference: Going North for Sustainability: Leveraging Knowledge and Innovation for Sustainable Construction and Development, 23 - 25 November 2015, London.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Investigation of Knowledge Management Principles in Delivering Sustainable Retrofitted Building Projects. In: 12th International Postgraduate Research Conference (IPGRC 2015), 10-12 June 2015, Salford.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Managing project knowledge in delivering sustainable retrofitted buildings: A decision support framework. In: 12th International Postgraduate Research Conference (IPGRC 2015), 10-12 June, 2015, Salford.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) The Use of Exploratory Research in Addressing Knowledge Issues in Delivering Sustainable Retrofitted Building Projects. In: Proceedings of ARCOM Doctoral Workshop on Research Methodology, 10 April 2015, Dublin Institute of Technology.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) The use of knowledge management approach in delivering sustainable retrofitted building projects: A conceptual decision support system for key stakeholders. In: 2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Istanbul.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) The use of mixed method research in addressing knowledge issues in delivering sustainable retrofitted building projects. In: MMIRA Asia Regional Conference, 19 - 20 September 2015, Ritsumeikan University, Osaka, Japan.

Maduka, Nnamdi Stanley (2017) The Role of Knowledge Management in Assisting Key Stakeholders in Making Informed Decisions in Delivering Sustainable Retrofitted Building Projects. Doctoral thesis, Northumbria University.

Mahamedi, Elham, Rogage, Kay, Doukari, Omar and Kassem, Mohamad (2021) Automating equipment productivity measurement using deep learning. In: Proceedings of the 2021 European Conference on Computing in Construction. Computing in Construction, 2 . University College Dublin, Dublin, pp. 140-147. ISBN 9783907234549

Mahamedi, Elham, Rogage, Kay, Doukari, Omar and Kassem, Mohamad (2021) Automating excavator productivity measurement using deep learning. Proceedings of the Institution of Civil Engineers - Smart Infrastructure and Construction, 174 (4). pp. 121-133. ISSN 2397-8759

Mahammedi, Charf E., Mahdjoubi, Lamine, Booth, Colin A. and Butt, Talib E. (2020) Towards the creation of a decision support system tool for the preliminary risk assessment of brownfield sites. WIT Transactions on Ecology and the Environment, 241. pp. 257-265. ISSN 1743-3541

Maheri, Alireza (2014) Atypical design optimisation of structures: case studies. In: High Performance and Optimum Design of Structures and Materials. WIT Transactions on The Built Environment, 137 . WIT Press, WIT Transactions on The Built Environment, pp. 419-430. ISBN 978-1845647742

Maheri, Alireza, Macquart, Terence, Safari, Davoud and Maheri, Mahmoud (2012) Phenotype building blocks and geometric crossover in structural optimisation. In: ECT2012: Eighth international conference on engineering computational technology, 4-7 September 2012, Dubrovnik.

Maheri, Alireza and Maheri, Mahmoud (2007) Optimum geometry design of plane trusses supporting distributed loads using genetic algorithms. In: 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, 18-21 September 2007, Malta.

Maheri, Alireza and Maheri, Mahmoud (2012) A robust method for integrated design of trusses supporting distributed loads. Engineering Structures, 40. pp. 339-349. ISSN 0141-0296

Maheri, Alireza, Osofero, Israel and Corradi, Marco (2014) Effect of Cross Arm and Stay Geometry on the Optimum Load Carrying Capacity of Prestressed Stayed Struts. In: CST2014: The Twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples.

Maheri, Mahmoud, Maheri, Alireza, Pourfallah, Saeed, Azarm, Ramin and Hadjipour, Akbar (2011) Improving the durability of straw-reinforced clay plaster cladding for earthen buildings. International Journal of Architectural Heritage, 5 (3). pp. 349-366. ISSN 1558-3058

Malik, Faheem, Jabbar, Shah Faisal Saleh Faisal Farooq Rather Malik Jasif and Rashid, Inam ul haq Wani Shahid Mushtaq Shah Farooz (2017) Road Accidents and Prevention. International Journal of Engineering Development and Research, 5 (2). pp. 40-46. ISSN 2321-9939

Malik, Faheem, Lone, Mansoor Ahmed, Qasab, Riyaz Ahmed and Gul, Misba (2016) Traffic Census and analysis (a case study). International Journal of Research in Engineering and Technology, 5 (3). pp. 69-76. ISSN 2321-7308

Mallory, Adrian, Crapper, Martin, Gyasi, Samuel and Boamah, B. (2016) A socio-economic analysis of different approaches to faecal sludge treatment in Sunyani, Ghana. In: 39th WEDC International Conference: Ensuring Availability and Sustainable Management of Water and Sanitation for All, 11-15 July 2016, Kumasi, Ghana.

Mallory, Adrian, Crapper, Martin and Holm, Rochelle (2019) Agent-Based Modelling for Simulation-Based Design of Sustainable Faecal Sludge Management Systems. International Journal of Environmental Research and Public Health, 16 (7). ISSN 1661-7827

Mannoni, Tiziano, Pesce, Giovanni and Vecchiattini, Rita (2004) Rapporti tra archeologia, archeometria e cultura materiale nello studio dei materiali impiegati nelle opere portuali. In: Le Strutture dei Porti e degli Approdi Antichi. Progetto ANSER . Rubettino, Roma, pp. 113-126. ISBN 88-498-1115-2

Maqbool, Rashid, Deng, Xiaomei and Rashid, Yahya (2020) Stakeholders’ satisfaction as a key determinant of critical success factors in renewable energy projects. Energy, Sustainability and Society, 10 (1). p. 28. ISSN 2192-0567

Maqbool, Rashid, Saiba, Mohammed Rayan, Altuwaim, Ayman, Rashid, Yahya and Ashfaq, Saleha (2023) The influence of industrial attitudes and behaviours in adopting sustainable construction practices. Sustainable Development, 31 (2). pp. 893-907. ISSN 0968-0802

Maqbool, Rashid, Saiba, Mohammed Rayan and Ashfaq, Saleha (2023) Emerging industry 4.0 and Internet of Things (IoT) technologies in the Ghanaian construction industry: sustainability, implementation challenges, and benefits. Environmental Science and Pollution Research, 30 (13). pp. 37076-37091. ISSN 0944-1344

Maqbool, Rashid and Wood, Harry (2022) Containing a sustainable urbanized environment through SuDS devices in management trains. Science of the Total Environment, 807 (Part 2). p. 150812. ISSN 0048-9697

Mayne, David, Usmani, Asif and Crapper, Martin (2000) h‐adaptive finite element solution of high Rayleigh number thermally driven cavity problem. International Journal of Numerical Methods for Heat & Fluid Flow, 10 (6). pp. 598-615. ISSN 0961-5539

Mayne, David, Usmani, Asif and Crapper, Martin (2001) h‐adaptive finite element solution of unsteady thermally driven cavity problem. International Journal of Numerical Methods for Heat & Fluid Flow, 11 (2). pp. 172-195. ISSN 0961-5539

McCrorie, K.A.B., Underwood, Chris and Le Feuvre, R.F. (1996) Small-scale combined heat and power simulations: Development of a dynamic spark-ignition engine model. Building Services Engineering Research and Technology, 17 (3). pp. 153-158. ISSN 0143-6244

McDowell, Liz (2009) Assessment – best practice or making the best of a bad job? In: Association of Civil Engineering Departments (ACED) Annual Conference, 12 - 13 November 2009, Cardiff University, Cardiff, Wales.

Mendes, Joao and Buzzi, Olivier (2013) New insight into cavitation mechanisms in high-capacity tensiometers based on high-speed photography. Canadian Geotechnical Journal, 50 (5). pp. 550-556. ISSN 0008-3674

Mendes, Joao, Gallipoli, D., Boeck, F. and Tarantino, A. (2020) A comparative study of high capacity tensiometer designs. Physics and Chemistry of the Earth, Parts A/B/C, 120. p. 102901. ISSN 1474-7065

Mendes, Joao, Najdi, Abdallah, Encalada, David, Prat, Pere and Ledesma, Alberto (2022) Towards the development on new high capacity tensiometers capable of measuring soil matric suction beyond 3 MPa. Canadian Geotechnical Journal, 59 (9). pp. 1539-1552. ISSN 0008-3674

Mendes, Joao and Toll, D. G. (2016) Influence of Initial Water Content on the Mechanical Behavior of Unsaturated Sandy Clay Soil. International Journal of Geomechanics, 16 (6). D4016005. ISSN 1532-3641

Mendes, Joao and Toll, David G. (2013) Influence of initial water content on the water retention behaviour of a sandy clay Soil. In: ICSMGE 2013 - 18th International Conference on Soil Mechanics and Geotechnical Engineering, 2nd - 6th September 2013, Paris, France.

Merrad, Walid, Rachedi, Abderrezak, Busawon, Krishna and Binns, Richard (2016) A survey on smart traffic network control and optimization. In: MEDO 2016 - International Conference on Multidisciplinary Engineering Design Optimization, 14th - 16th September 2016, Belgrade, Serbia.

Mhalas, Amit, Kassem, Mohamad, Crosbie, Tracey and Dawood, Nashwan (2013) A visual energy performance assessment and decision support tool for dwellings. Visualization in Engineering, 1 (1). ISSN 2213-7459

Mirzaei, Mohammad Amin, Zare, Kazem, Mohammadi-Ivatloo, Behnam, Marzband, Mousa and Anvari-Moghaddam, Amjad (2021) Robust Network-Constrained Energy Management of a Multiple Energy Distribution Company in the presence of Multi-Energy Conversion and Storage Technologies. Sustainable Cities and Society, 74. p. 103147. ISSN 2210-6707

Moehler, Robert (2015) Employer strategies to develop skills in projectified work of mega infrastructure renewal. In: Northumbria Research Conference, 20 May 2015, Northumbria University, Newcastle-upon-Tyne.

Mohamed, Rana, Alwan, Zaid and Mcintyre, Lesley (2020) BIM for sustainable project delivery: review paper and future development areas. Architectural Science Review, 63 (1). pp. 15-33. ISSN 0003-8628

Moharrami, Saeid, Taghaddos, Maedeh, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2021) A hybrid simulation approach for microtunneling construction planning. Construction Innovation, 21 (3). pp. 363-378. ISSN 1471-4175

Mokhtar Azizi, Zahirah, Cochrane, James, Thurairajah, Niraj and Mokhtar Azizi, Nurul Sakina (2023) Remote working in construction: assessing the affordance of digitisation. Built Environment Project and Asset Management, 13 (1). pp. 5-19. ISSN 2044-124X

Monteleone, Maria, Crapper, Martin and Motta, Davide (2021) The supply of the public lacus of Pompeii, estimated from the discharge of their overflow channels. Water History, 13 (2). pp. 189-216. ISSN 1877-7236

Mozaffari, Amirpasha, Klotzsche, Anja, Guowei, He, Giannopoulos, Antonios, Warren, Craig, Vereecken, Harry and Van der Kruk, Jan (2016) 2.5 D Crosshole GPR Full-waveform Inversion. In: AGU Fall Meeting 2016, 12th - 16th December 2016, San Francisco, USA.

Mozaffari, Amirpasha, Klotzsche, Anja, He, Guowei, Vereecken, Harry, van der Kruk, Jan, Warren, Craig and Giannopoulos, Antonios (2016) Towards 3D full-waveform inversion of crosshole GPR data. In: GPR2016 - 16th International Conference on Ground Penetrating Radar, 13th - 16th June 2016, Hong Kong, China.

Msawil, Mahir, Greenwood, David and Kassem, Mohamad (2022) A Systematic evaluation of blockchain-enabled contract administration in construction projects. Automation in Construction, 143. p. 104553. ISSN 0926-5805

Mukhopadhyay, Tanmoy, Ma, Jiayao, Feng, Huijuan, Hou, Degao, Gattas, Joseph M., Chen, Yan and You, Zhong (2020) Programmable stiffness and shape modulation in origami materials: Emergence of a distant actuation feature. Applied Materials Today, 19. p. 100537. ISSN 2352-9407

Muldoon-Smith, Kevin and Moreton, Leo (2022) Planning Adaptation: Accommodating Complexity in the Built Environment. Urban Planning, 7 (1). pp. 44-55. ISSN 2183-7635

Muldoon-Smith, Kevin, Moreton, Leo and Kotter, Richard (2021) Meaningful Transfer: Tech-knowlogical interdependencies in the digital built environment. Frontiers in Sustainable Cities, 3. p. 709800. ISSN 2624-9634

Mustafaraj, Enea, Luga, Erion, Corradi, Marco, Borri, Antonio, Muceku, Ylber and Zharkalli, Aleksandra (2021) Physical-Mechanical Properties of Stone Masonry of Gjirokastër, Albania. Materials, 14 (5). p. 1127. ISSN 1996-1944

Mustafaraj, Enea, Yardim, Yavuz, Corradi, Marco and Borri, Antonio (2020) Polypropylene as a Retrofitting Material for Shear Walls. Materials, 13 (11). p. 2503. ISSN 1996-1944

N

Nagaratnam, Brabha, Faheem, Ahmed, Rahman, Muhammad, Mannan, Mohammad and Leblouba, Moussa (2015) Mechanical and Durability Properties of Medium Strength Self-Compacting Concrete with High-Volume Fly Ash and Blended Aggregates. Periodica Polytechnica Civil Engineering, 59 (2). pp. 155-164. ISSN 0553-6626

Nagaratnam, Brabha, Rahman, Muhammad, Mirasa, A. K. and Mannan, M. A. (2014) Workability of Self-Compacting Concrete Using Blended Waste Materials. Advanced Materials Research, 1043. pp. 273-277. ISSN 1662-8985

Nguyen, Hoang, Lee, Jaehong, Vo, Thuc and Lanc, Domagoj (2016) Vibration and lateral buckling optimisation of thin-walled laminated composite channel-section beams. Composite Structures, 143. pp. 84-92. ISSN 0263-8223

Nguyen, Hoang, Nguyen, Tuan, Abdel-Wahab, M., Bordas, S. P. A., Nguyen-Xuan, H. and Vo, Thuc (2017) A refined quasi-3D isogeometric analysis for functionally graded microplates based on the modified couple stress theory. Computer Methods in Applied Mechanics and Engineering, 313. pp. 904-940. ISSN 0045-7825

Nguyen, Hoang, Vu, Thanh, Vo, Thuc P. and Thai, Huu-Tai (2021) Efficient machine learning models for prediction of concrete strengths. Construction and Building Materials, 266 (Part B). p. 120950. ISSN 0950-0618

Nguyen, Kien, Thai, Huu-Tai and Vo, Thuc (2015) A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates. Steel and Composite Structures, 18 (1). pp. 91-120. ISSN 1229-9367

Nguyen, Trung-Kien, Nguyen, Ba-Duy, Vo, Thuc and Thai, Huu-Tai (2017) Hygro-thermal effects on vibration and thermal buckling behaviours of functionally graded beams. Composite Structures, 176. pp. 1050-1060. ISSN 0263-8223

Nguyen, Trung-Kien, Nguyen, Ngoc-Duong, Vo, Thuc and Thai, Huu-Tai (2017) Trigonometric-series solution for analysis of laminated composite beams. Composite Structures, 160. pp. 142-151. ISSN 0263-8223

Nguyen, Trung-Kien, Nguyen, T. Truong-Phong, Vo, Thuc and Thai, Huu-Tai (2015) Vibration and buckling analysis of functionally graded sandwich beams by a new higher-order shear deformation theory. Composites Part B: Engineering, 76. 273- 285. ISSN 1359-8368

Nguyen, Trung-Kien, Nguyen, Van-Hau, Chau-Dinh, Thanh, Vo, Thuc and Nguyen-Xuan, H. (2016) Static and vibration analysis of isotropic and functionally graded sandwich plates using an edge-based MITC3 finite elements. Composites Part B: Engineering, 107. pp. 162-173. ISSN 1359-8368

Nguyen, Trung-Kien, Vo, Thuc and Thai, Huu-Tai (2013) Static and free vibration of axially loaded functionally graded beams based on the first-order shear deformation theory. Composites Part B: Engineering, 55. 147 - 157. ISSN 1359-8368

Nguyen, Trung-Kien, Vo, Thuc and Thai, Huu-Tai (2014) Vibration and buckling analysis of functionally graded sandwich plates with improved transverse shear stiffness based on the first-order shear deformation theory. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (12). pp. 2110-2131. ISSN 0954-4062

Nguyen, Van-Hau, Nguyen, Trung-Kien, Thai, Huu-Tai and Vo, Thuc (2014) A new inverse trigonometric shear deformation theory for isotropic and functionally graded sandwich plates. Composites Part B: Engineering, 66. pp. 233-246. ISSN 1359-8368

Nguyen, Vinh, Greenwood, David and Ginige, Kanchana (2017) Challenges in integrating disaster risk reduction into the built environment – The Vietnam context. In: 7th International Conference on Building Resilience; Using scientific knowledge to inform policy and practice in disaster risk reduction (ICBR2017), 27-29 November 2017, Bangkok.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the ductility and seismic behavior factor of ordinary RC frames using fiber composite sheets. In: The 3rd International Conference on Concrete and Development, 27-29 April 2009, Building and Housing Research Center, Tehran, Iran.

Niroomandi, Arsalan and Maheri, Alireza (2009) Upgrading the performance level of ordinary frames using fibre reinforced plastic sheets. In: 8th International Congress on Civil Engineering, 11-13 May 2009, Shiraz University, Shiraz, Iran.

Niroomandi, Arsalan, Maheri, Alireza, Maheri, Mahmoud and Mahini, Saeed (2010) Seismic performance of ordinary RC frames retrofitted at joints by FRP sheets. Engineering Structures, 32 (8). pp. 2326-2336. ISSN 0141-0296

O

Ojiako, G. U., Greenwood, David and Johansen, D. E. (2006) Redefining Project Failure in converged and Multi-dimensional Telecommunications ICT Projects. The Journal of the Communications Network, 5 (3). pp. 23-28.

Okokpujie, Imhade P., Essien, Victor, Ikumapayi, Omolayo M., Nnochiri, Emeka S., Okokpujie, Kennedy and Akinlabi, Esther (2022) An Overview of Thermal Insulation Material for Sustainable Engineering Building Application. International Journal of Design & Nature and Ecodynamics, 17 (6). pp. 831-841. ISSN 1755-7437

Okudan, Ozan, Budayan, Cenk and Arayici, Yusuf (2022) Identification and Prioritization of Key Performance Indicators for the Construction Small and Medium Enterprises. Teknik Dergi, 33 (5). pp. 12635-12662. ISSN 1300-3453

Oladinrin, Timo Olugbenga, Ojo, Lekan Damilola, Adeniyi, Onaopepo and Adedeji, Funke Dorcas (2022) Severity of Ethical Issues in Virtual Teams on Construction Projects. International Journal of Business Governance and Ethics. ISSN 1477-9048 (In Press)

Osofero, Israel, Corradi, Marco and Borri, Antonio (2015) Experimental study of bond strength between titanium bar and lime-based mortar. Journal of Materials in Civil Engineering, 27 (6). 04014182. ISSN 0899-1561

Osofero, Israel, Udeaja, Chika, Corradi, Marco and Vo, Thuc (2014) Sustainability Challenges in Civil Engineering Education. In: 15th International Conference on Computing in Civil and Building Engineering, 23 - 25 June 2012, Orlando, Florida.

Osofero, Israel, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Analytical solution for vibration and buckling of functionally graded sandwich beams using various quasi-3D theories. Journal of Sandwich Structures and Materials, 18 (1). pp. 3-29. ISSN 1099-6362

Osofero, Israel, Wadee, Ahmer and Gardner, Leroy (2012) Experimental study of critical and post-buckling behaviour of prestressed stayed columns. Journal of Constructional Steel Research, 79. 226 - 241. ISSN 0143-974X

Osofero, Israel, Wadee, Ahmer and Gardner, Leroy (2013) Numerical studies on the buckling resistance of prestressed stayed columns. Advances in Structural Engineering, 16. pp. 487-498. ISSN 1369-4332

Ozoemena, Chukwunonso Emmanuel, Hackney, Philip, Birkett, Martin and Bell, David (2019) An experimental strategy for fractionating 33 and 34 factorial experiments. International Journal for Quality Research, 13 (3). pp. 505-520. ISSN 1800-6450

P

Pajewski, Lara, Giannopoulos, Antonios, Marciniak, Marian, Meschino, Simone, Popov, Alexei, Prokopovich, Igor, Ventura, Alessio and Warren, Craig (2017) Short-term scientific missions on forward and inverse electromagnetic-scattering techniques for ground penetrating radar. In: ACES 2017 - Applied Computational Electromagnetics Society Symposium, 26th - 30th March 2017, Firenze, Italy.

Pajewski, Lara, Giannopoulos, Antonios, Warren, Craig, Antonijevic, Sinisa, Doric, Vicko, Poljak, Dragan and Pirrone, Daniele (2017) Development of electromagnetic simulators for Ground Penetrating Radar. In: ACES 2017 - Applied Computational Electromagnetics Society Symposium, 26th - 30th March 2017, Firenze, Italy.

Pajewski, Lara, Giannopoulos, Antonis, Lambot, Sébastien, Marciniak, Marian, Meschino, Simone, Pinel, Nicolas, Sbartai, Mehdi and Warren, Craig (2016) Short-Term Scientific Missions on electromagnetic modelling and inversion techniques for Ground Penetrating Radar-COST Action TU1208. In: EuCAP 2016 - 10th European Conference on Antennas and Propagation, 10th - 15th April 2016, Davos, Switzerland.

Pajewski, Lara, Warren, Craig, Giannopoulos, Antonios, Lambot, Sébastien, Pirrone, Daniele, Randazzo, Andrea, Sesnic, Silvestar, Benedetto, Francesco and Economou, Nikos (2017) Electromagnetic modelling, inversion, imaging and data-processing techniques for Ground Penetrating Radar: main results achieved by Working Group 3 of COST Action TU1208. In: Bearing Capacity of Roads, Railways & Airfields, 10th International Conference on, 28-30 June 2017, Athens.

Pan, Song, Xu, Chuanqi, Wei, Shen, Hassan, Tarek, Xie, Lang, Xiong, Yingzi, Firth, Steven, Greenwood, David and de Wilde, Pieter (2015) Improper window use in office buildings: findings from a longitudinal study in Beijing, China. In: Low-carbon Cities and Urban Energy systems (CUE2015) Conference, 15-17 November 2015, Fuzhou, China.

Pan, Yiguang, Deng, Xiaomei, Maqbool, Rashid and Niu, Weirui (2019) Insurance Crisis, Legal Environment, and the Sustainability of Professional Liability Insurance Market in the Construction Industry: Based on the US Market. Advances in Civil Engineering, 2019. pp. 1-13. ISSN 1687-8086

Park, Daekyu, Vo, Thuc and Lee, Jaehong (2006) A simplified analytical models for framed-tubular structures using shear-deformable beam theory. In: 4th International Symposium on Steel Structure (ISSS 2006), 16-18 November 2006, Seoul, Korea.

Parmar, Darshit, Sullivan, Kenneth, Egbu, Charles, Greenwood, David and Kashiwagi, Dean (2005) Statistical comparison of performance based procurement and price based procurement. In: Construction Research Congress 2005. American Society of Civil Engineers, pp. 899-908. ISBN 978-0-7844-0754-7

Parsons, Anthony J., Bracken, Louise J., Poeppl, Ronald E., Wainwright, John and Keesstra, Saskia D. (2015) Introduction to special issue on connectivity in water and sediment dynamics. Earth Surface Processes and Landforms, 40 (9). pp. 1275-1277. ISSN 0197-9337

Paul, Gordon, Rezaienia, Amin, Shen, Xiang, Avital, Eldad and Korakianitis, Theodosios (2016) Slip and turbulence phenomena in journal bearings with application to implantable rotary blood pumps. Tribology International, 104. pp. 157-165. ISSN 0301-679X

Perera, Srinath and Karunasena, Gayani (2003) CMMS: Computer-aided Construction Materials Management System. Journal of Building and Construction Management, 08 (1). ISSN 1024-9540

Pesce, Giovanni (2000) La datazione mensiocronologica. In: Archeologia urbana a Savona. Marco Sabatelli Editore, Italy, p. 25. ISBN 9788886796057

Pesce, Giovanni (2000) Lo studio della volta ad ombrello. In: Archeologia urbana a Savona. Marco Sabatelli Editore, Italy, pp. 34-38. ISBN 9788886796057

Pesce, Giovanni, Ball, Richard, Grant, Robert, Yeandel, Stephen and Parker, Stephen (2015) Atomistic modelling for the construction industry. In: 35th Cement and Concrete Science Conference (CCSC35), 26-28 August 2015, Aberdeen.

Pesce, Giovanni, Ball, Richard, Molinari, Marco, Grant, James and Parker, Steve (2016) Atomistic Modelling for Low-Carbon Cement and Concrete Technologies. In: International Workshop on Innovation in Low-carbon Cement & Concrete Technology, 21st-24th September 2016, University College London.

Pesce, Giovanni and Decri, Anna (2013) Analisi critica della datazione delle malte con il metodo del radiocarbonio. In: La Cattedrale di Alba. Archeologia di un Cantiere (ArcheologiaPiemonte 1). Insegna del Giglio, Florence, Italy, pp. 217-222. ISBN 9788878145450

Pesce, Giovanni, Fletcher, Ian, Grant, James, Parker, Stephen, Molinari, Marco and Ball, Richard (2017) Phase Transformations and Ion Exchange During Early Age Carbonation. In: 37th Cement and Concrete Science Conference, 11-12 September 2017, University College London.

Pesce, Giovanni and Martini, S. (2005) Il terrazzamento con muri in pietra a secco. Forme e cause di degrado. In: V.V.A.A. 2005. La Spezia, Italy, pp. 32-50.

Pesce, Giovanni and Martini, S. (2005) Il terrazzamento con muri in pietra a secco. La tecnica costruttiva. In: V.V.A.A. 2005. La Spezia, Italy, pp. 15-31.

Pesce, Giovanni and Martini, S. (2005) Indicazioni per la ricostruzione dei muri a secco. In: V.V.A.A. 2005. La Spezia, Italy.

Pesce, Giovanni, Micheletto, Egle, Quarta, Gianluca, Ugge, Sofia, Calcagnile, Lucio and Decri, Anna (2013) Radiocarbon dating of mortars from the baptismal font of the San Lorenzo cathedral of Alba (Cuneo, Italy):Comparison with thermoluminescence dating of related bricks and pipes. Radiocarbon, 55 (2). pp. 526-533.

Pesce, Giovanni, Molinari, Marco, Grant, Robert, Parker, Stephen and Ball, Richard (2016) Experimental and computational study of the dissolution mechanism of Portlandite nano-crystals. In: Euro AFM Forum, 22-24 June 2016, Geneva.

Pesce, Giovanni, Morgan, Deborah, Odgers, David, Henry, Alison, Allen, Mollie and Ball, Richard (2013) Consolidation of weathered limestone using nanolime. Proceedings of the Institution of Civil Engineers: Construction Materials, 166 (4). pp. 213-228. ISSN 1747-650X

Pesce, Giovanni, Pesce, Cecilia, Henry, Alison, Leslie, Alick and David, John (2019) The use of dolomitic lime in mortar samples from a 15th-century buttress of York Minster (York, UK). In: HMC 2019 - 5th Historic Mortars Conference, 19th - 21st June 2019, Pamplona, Spain.

Pesce, Giovanni and Ricci, Roberto (2009) La diffusione e l'uso delle 'malte al caolino' attraverso lo studio delle analisi XRD. Notiziario di Archeologia Medievale, 78. pp. 10-13. ISSN 0393-7402

Pesce, Giovanni and Vecchiattini, Rita (2010) La marcatura delle calci da costruzione. Note per una lettura consapevole delle etichette riportate sulle confezioni di vendita. Arkos, 22. pp. 56-62.

Pflitsch, Andreas, Brüne, Markus, Killing-Heinze, Michael, Ringeis, Julia, Agnew, Brian and Steiling, Benjamin (2013) Natural Ventilation as a Factor Controlling the Dispersal of Airborne Toxins in Subway Systems in a Disaster Situation. Journal of Transportation Safety and Security, 5 (1). pp. 78-92. ISSN 1943-9962

Ponton, Hazel (2021) Social interactions in construction design team meetings. Doctoral thesis, Northumbria University.

Poologanathan, Keerthan and Mahendran, Mahen (2015) Experimental investigation and design of lipped channel beams in shear. Thin-Walled Structures, 86. pp. 174-184. ISSN 0263-8231

Poologanathan, Keerthan and Mahendran, Mahen (2016) Shear tests of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 121. pp. 330-340. ISSN 0143-974X

Potter, Steve (1998) Modelling of three-dimensional transient conjugate convection-conduction-radiation heat transfer processes and turbulence in building spaces. Doctoral thesis, University of Northumbria at Newcastle.

Q

Qi, Xiaohui and Chu, Jian (2021) Tang C, Phoon KK. (2021) Model uncertainties in foundation design. CRC Press, Taylor and Francis Group, 1st edition. 568 pages, ISBN: 978-0-429--02,499-3, £112.00. Acta Geotechnica, 16 (11). pp. 3739-3740. ISSN 1861-1125

Qi, Xiaohui, Wang, Hao, Pan, Xiaohua, Chu, Jian and Chiam, Kiefer (2021) Prediction of interfaces of geological formations using the multivariate adaptive regression spline method. Underground Space, 6 (3). pp. 252-266. ISSN 2467-9674

Qian, Ying, Zheng, Wei, Chen, Wenge, Feng, Tao, Liu, Xiaoteng and Fu, Richard (2021) Enhanced functional properties of CeO2 modified graphene/epoxy nanocomposite coating through interface engineering. Surface and Coatings Technology, 409. p. 126819. ISSN 0257-8972

R

Rahimian, Farzad Pour, Chavdarova, Veselina, Stephen, Oliver and Chamo, Farhad (2019) OpenBIM-Tango Integrated Virtual Showroom for Offsite Manufactured Production of Self-Build Housing. Automation in Construction, 102. pp. 1-16. ISSN 0926-5805

Rahimian, Farzad Pour and Goulding, Jack (2011) Strategies and opportunities for exploiting game theory approaches in virtual AEC tele-collaboration. In: CONVR2011, Proceedings of the 11th International Conference on Construction Applications of Virtual Reality 2011. Bauhaus-Universität. ISBN 9783860684580

Rahman, Mohammad, Ali, Muhammad Ashraf, Chowdhury, Ahmed I. A. and Ravenscroft, Peter (2023) Manganese in groundwater in South Asia needs attention. ACS Environmental Science and Technology Water, 3 (6). pp. 1425-1428. ISSN 2690-0637

Rahman, Muhammad, Boon, Ang Lye, Muntohar, Agus Setyo, Hashem Tanim, Md Nafeez and Pakrashi, Vikram (2014) Performance of masonry blocks incorporating Palm Oil Fuel Ash. Journal of Cleaner Production, 78. pp. 195-201. ISSN 0959-6526

Rahman, Muhammad, Muntohar, A.S., Pakrashi, V., Nagaratnam, Brabha and Sujan, D. (2014) Self compacting concrete from uncontrolled burning of rice husk and blended fine aggregate. Materials and Design, 55. pp. 410-415. ISSN 0261-3069

Rahman, Muhammad, Pakrashi, Vikram, Banerjee, Subhadeep and Orr, Trevor (2016) Suitable Waves for Bender Element Tests: Interpretations, Errors and Modelling Aspects. Periodica Polytechnica Civil Engineering, 60 (2). pp. 145-158. ISSN 0553-6626

Rahman, Muhammad, Ting, Timothy Zhi Hong, Lau, Hieng Ho, Nagaratnam, Brabha and Poologanathan, Keerthan (2021) Behaviour of Lightweight Concrete Wall Panel under Axial Loading: Experimental and Numerical Investigation toward Sustainability in Construction Industry. Buildings, 11 (12). p. 620. ISSN 2075-5309

Rajanayagam, Heshachanaa, Gunawardena, Tharaka, Mendis, Priyan, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Dissanayake, Madhushan and Corradi, Marco (2022) Evaluation of inter-modular connection behaviour under lateral loads: An experimental and numerical study. Journal of Constructional Steel Research, 194. p. 107335. ISSN 0143-974X

Rajanayagam, Heshachanaa, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Varelis, George E., Sherlock, Paul, Nagaratnam, Brabha and Hackney, Philip (2021) A-State-Of-The-Art review on modular building connections. Structures, 34. pp. 1903-1922. ISSN 2352-0124

Ramadan, Ahmed Mohamed (2017) Investigation of flow and heat transfer in a large-scale spent nuclear fuel cooling pond. Doctoral thesis, Northumbria University.

Ranathungage, Amalka, Alwan, Zaid, Gledson, Barry and Fernando, Nirodha (2020) A Conceptual Methodology for Estimating Embodied Carbon Emissions of Buildings in Sri Lanka. In: Sustainability in Energy and Buildings. Smart Innovation, Systems and Technologies (163). Springer, Singapore, pp. 83-95. ISBN 9789813298675, 9789813298682

Ranathungage, Amalka Nawarathna, Siriwardana, Muditha and Alwan, Zaid (2021) Embodied Carbon as a Material Selection Criterion: Insights from Sri Lankan Construction Sector. Sustainability, 13 (4). p. 2202. ISSN 2071-1050

Raw-Rees, Steffan, Pesce, Giovanni, Ball, Richard and Fodde, Enrico (2012) Characterization of binders in the historic lime mortars and plasters from 1A Royal Crescent, Bath. Journal of the Building Limes Forum, 19. pp. 28-37.

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2017) Genetic Algorithm–Simulation Framework for Decision Making in Construction Site Layout Planning. Journal of Construction Engineering and Management, 143 (1). 04016084. ISSN 0733-9364

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2017) Site Layout and Construction Plan Optimization Using an Integrated Genetic Algorithm Simulation Framework. Journal of Computing in Civil Engineering, 31 (4). 04017011. ISSN 0887-3801

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2015) A hybrid simulation approach for quantitatively analyzing the impact of facility size on construction projects. Automation in Construction, 60. pp. 39-48. ISSN 0926-5805

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2014) An integrated simulation model for site layout planning of tunnelling projects. In: 13th International Conference on Modeling and Applied Simulation (MAS 2014): Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2014) ; Bordeaux, France, 10 – 12 September 2014. Curran, Red Hook, NY, pp. 46-53. ISBN 9788897999348

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2022) A simulation-based decision support tool for integrating site layout and construction planning of tunneling projects. Journal of Engineering, Design and Technology, 20 (4). pp. 866-886. ISSN 1726-0531

RazaviAlavi, SeyedReza, AbouRizk, Simaan and Alanjari, Pejman (2014) Estimating the size of temporary facilities in construction site layout planning using simulation. In: Construction Research Congress 2014: Construction in a Global Network - Proceedings of the 2014 Construction Research Congress, May 19–21, 2014 Atlanta, Georgia, USA. American Society of Civil Engineers (ASCE), Reston, Virginia, United States, pp. 70-79. ISBN 9780784413517

Razmjoo, Armin, Nezhad, Meysam Majidi, Kaigutha, Lisa Gakenia, Marzband, Mousa, Mirjalili, Seyedali, Pazhoohesh, Mehdi, Memon, Saim, Ehyaei, Mehdi A. and Piras, Giuseppe (2021) Investigating Smart City Development Based on Green Buildings, Electrical Vehicles and Feasible Indicators. Sustainability, 13 (14). p. 7808. ISSN 2071-1050

Riaz, Nadia, Sultan, Muhammad, Miyazaki, Takahiko, Shahzad, Muhammad Wakil, Farooq, Muhammad, Sajjad, Uzair and Niaz, Yasir (2021) A review of recent advances in adsorption desalination technologies. International Communications in Heat and Mass Transfer, 128. p. 105594. ISSN 0735-1933

Richardson, Alan (2004) Alkali-silica reaction. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2004) Bond characteristics and fibre orientation of polypropylene fibres in concrete with regard to flexural strength. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2004) Building regulation consultation - your say in changes affecting your industry. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2004) Cement/Concrete manufacture with regard to global warming. International Civil Engineering Abstracts. pp. 1-4. ISSN 0332-4095

Richardson, Alan (2005) Changes in Construction Management. Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) Commitment and participation within civil engineering contracts. International Civil Engineering Abstracts. pp. 1-6. ISSN 0332-4095

Richardson, Alan (2005) Concept of Stability. International Civil Engineering Abstracts. pp. 1-4. ISSN 0332-4095

Richardson, Alan (2004) Concrete and sustainability - waste streams in the construction process: the use of red gypsum as a concrete binder.

Richardson, Alan (2005) David or Goliath in Construction. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2018) The Dome Lives. Robin.

Richardson, Alan (2010) Durability performance tests. In: Concrete Durability: A practical guide to the design of durable concrete structures. Thomas Telford, London, pp. 108-123. ISBN 9780727735171

Richardson, Alan (2005) Early Life Freeze-thaw tests on concrete with varying types of fibre content. International Civil Engineering Abstracts. pp. 1-2. ISSN 0332-4095

Richardson, Alan (2004) Effects of government led reports on the construction industry. Building and Construction North.

Richardson, Alan (2004) Effects of government-led reports on the construction industry. International Civil Engineering Abstracts. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2004) Glass waste streams as concrete aggregates or pozzolana. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2003) Hydropolis – The New Atlantis? International Civil Engineering Abstract. pp. 1-3. ISSN 0332-4095

Richardson, Alan (2003) Planning policy guidance note 25, development and flood risk assessment. International Civil Engineering Abstracts. pp. 1-4. ISSN 0332-4095

Richardson, Alan (2005) Safe design in an unsafe world? International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2004) Seeing the wood from the trees. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2016) Self Healing concrete. [Broadcast]

Richardson, Alan (2004) Sustainable construction - a trend or a genuine need? International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan (2005) Training Needs. International Civil Engineering Abstracts. pp. 1-4. ISSN 0332-4095

Richardson, Alan (2007) A comparative study of post crack flexural toughness with A142 fabric steel reinforcement and structural polypropylene fibres in medium strength concrete beams. In: International Conference on Advances in Cement Based Materials and applications in Civil Infrastructure (ACBM-ACI), 12-14 December 2007, Lahore, Pakistan.

Richardson, Alan (2004) The role of aggregate in concrete durability. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan, Amess, Leon, Neville, Simon and Walton, Christopher (2017) Crack healing utilising bacterial spores in concrete. Journal of Green Building, 12 (3). pp. 103-114. ISSN 1552-6100

Richardson, Alan and Batey, David (2015) Impact resistance of concrete using dovetailed fibres and type 2 synthetic fibres. In: The Fifth International Conference on Construction Materials (CONMAT15), 19-21 August 2015, Whistler.

Richardson, Alan and Broadfoot, Antony (2013) Closed loop wire reinforcement to concrete beams. Construction and Building Materials, 43. pp. 278-285. ISSN 0950-0618

Richardson, Alan and Carrielies, Paul (2012) Concrete porosity with polypropylene fibres and silica fume. In: 2nd Annual International Conference on Construction, 18-21 June 2012, Athens, Greece.

Richardson, Alan and Coventry, Kathryn (2010) Early life freeze/thaw durability of Type 1 polypropylene fibre and ground granulated blast furnace slag concretes. In: Second International Conference on Sustainable Construction Materials and Technologies, 28-30 June 2010, Università Politecnica delle Marche, Ancona, Italy.

Richardson, Alan, Coventry, Kathryn and Boussoffara, Riyadh (2013) Performance of dove tailed synthetic fibres in concrete. Emerging Materials Research, 3 (1). pp. 52-66. ISSN 2046-0147

Richardson, Alan, Coventry, Kathryn, Edmondson, Vikki and Dias, Eli (2016) Crumb rubber used in concrete to provide freeze–thaw protection (optimal particle size). Journal of Cleaner Production, 112 (1). pp. 599-606. ISSN 0959-6526

Richardson, Alan, Coventry, Kathryn, Forster, Alan and Jamison, Christopher (2014) Surface consolidation of natural stone materials using microbial induced calcite precipitation. Structural Survey, 32 (3). ISSN 0263-080X

Richardson, Alan, Coventry, Kathryn, Lamb, Thomas and Mackenzie, David (2016) The addition of synthetic fibres to concrete to improve impact/ballistic toughness. Construction and Building Materials, 121. pp. 612-621. ISSN 0950-0618

Richardson, Alan, Coventry, Kathryn and Morgan, Miles (2011) Elevated temperature concrete curing - using polypropylene fibres. In: Fibre Concrete 2011 – 6th International Conference,, 8-9 September 2011, Czech Technical University, Prague, Czech Republic,.

Richardson, Alan, Coventry, Kathryn and Pasley, Jack (2016) Микробиологическое осаждение кальцита: применение для залечивания трещин (Microbiological deposition of calcite: crack sealing applications). Цемент И ЕГО ПРИМЕНЕНИЕ (Cement and its Application). ISSN 1607-8837

Richardson, Alan, Coventry, Kathryn and Scott, Andrew (2014) Bacterial Concrete: A biological approach to reduced permeability. In: XIII International Conference on durability of building materials and composites, 2 - 5 September, Sao Paulo, Brazil.

Richardson, Alan, Coventry, Kathryn and Wilkinson, Sean (2012) Freeze/thaw durability of concrete with synthetic fibre additions. Cold regions science and technology, 83-84. pp. 49-46. ISSN 0165-232X

Richardson, Alan, Dawson, Susan, Campbell, Laura, Moore, George and McKenzie, Craig (2019) Temperature related pull-out performance of chemical anchor bolts in fibre concrete. Construction and Building Materials, 196. pp. 478-484. ISSN 0950-0618

Richardson, Alan and Dias, Eli (2014) Rubber crumb used in concrete to provide freeze-thaw protection (optimum particle size). Concrete, 48 (6). pp. 39-41. ISSN 0010-5317

Richardson, Alan and Fuller, Tom (2013) Sea shells used as partial aggregate replacement in concrete. Structural Survey, 31 (5). pp. 347-354. ISSN 0263-080X

Richardson, Alan, Lamb, Thomas and MacKenzie, David (2015) The addition of synthetic fibres to concrete to improve impact toughness. Concrete, 49 (10). pp. 32-34. ISSN 0010-5317

Richardson, Alan and Lonsdale, Jon (2004) History of concrete. International Civil Engineering Abstracts. ISSN 0332-4095

Richardson, Alan and Ovington, Rhys (2016) Performance of fibre concrete with regard to temperature. Concrete, 50 (09). pp. 37-39.

Richardson, Alan and Ovington, Rhys (2017) Temperature related steel and synthetic fibre concrete performance. Construction and Building Materials, 153. pp. 616-621. ISSN 0950-0618

Richardson, Alan, Valentine, Ross, Abrahams, Max and Nicholson, Dan (2018) Microbial Calcite Induced Precipitation Ground Strengthening with Minimum Cement Content. In: Final Conference of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions. RILEM, pp. 433-444. ISBN 978-2-35158-210-7

Richardson, Alan and Wilkinson, Sean (2009) Early life freeze/thaw tests on concrete with varying types of fibre content. In: 9th International Symposium on Fiber Reinforced Polymer Reinforcement for Concrete Structures, 13-15 July 2009, Sydney, Australia.

Righetti, Luca, Borri, Antonio and Corradi, Marco (2016) Sustainable Strengthening Techniques for Masonry Structures. In: Cinpar 2016 - XII International Conference on Structural Repair and Rehabilitation, 26th - 29th October 2016, Porto, Portugal.

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Analytical study on bond behavior of CFRP bars epoxied into timber elements. In: 3rd International Conference on Structural Health Assessment of Timber Structures (SHATIS '15), 9-11 Sep 2015, Wroclaw, Poland.

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Basalt FRP Spike Repairing of Wood Beams. Fibers, 3 (3). pp. 323-337. ISSN 2079-6439

Righetti, Luca, Corradi, Marco and Borri, Antonio (2016) Shear resistance of screwed timber connections with parallel to grain FRP reinforcements. In: World Conference on Timber Engineering, August 22-25, 2016, Vienna, Austria.

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Strengthening of timber beams with unbonded FRP composites. In: 16th European Bridge Conference, 23-25 June 2015, Edinburgh, UK.

Righetti, Luca, Corradi, Marco, Borri, Antonio, Castori, Giulio, Sisti, Romina and Osofero, Israel (2016) Durability of GFRP grids for masonry structures. International Journal of Forensic Engineering, 3 (1-2). pp. 164-179. ISSN 1744-9952

Righetti, Luca, Edmondson, Vikki, Corradi, Marco and Borri, Antonio (2016) Behaviour of small masonry assemblages reinforced with a steel cord reinforced joint repointing. In: 16th International Conference on Structural Faults and Repair, 17-19 May 2016, Edinburgh.

Righetti, Luca, Edmondson, Vikki, Corradi, Marco and Borri, Antonio (2016) Fiberglass Grids as Sustainable Reinforcement of Historic Masonry. Materials, 9 (7). p. 603. ISSN 1966-1944

Rodriguez-Trejo, Sergio, Ahmad, Ahmad Mohammad, Hafeez, Mian Atif, Dawood, Huda, Vukovic, Vladimir, Kassem, Mohamad, Naji, Khalid and Dawood, Nashwan (2017) Hierarchy based information requirements for sustainable operations of buildings in Qatar. Sustainable Cities and Society, 32. pp. 435-448. ISSN 2210-6707

Rogage, Kay and Gledson, Barry (2018) Exploring the development of, and initial exposure to, a BIM-enabled collaborative project information management tool. In: 34th Annual ARCOM Conference: A Productive Relationship: Balancing Fragmentation and Integration, 3-5 September 2018, Belfast.

Rollason, Ed, Bracken, Louise J., Hardy, R.J. and Large, A.R.G. (2018) The importance of volunteered geographic information for the validation of flood inundation models. Journal of Hydrology, 562. pp. 267-280. ISSN 0022-1694

Roosli, Ruhizal and Collins, Andrew (2016) Key Lessons and Guidelines for Post-Disaster Permanent Housing Provision in Kelantan, Malaysia. Procedia Engineering, 145. pp. 1209-1217. ISSN 1877-7058

Ruggeri, Francesca, Crapper, Martin, Snyder, Riley and Crow, Jim (2017) A GIS-based assessment of the Byzantine water supply system of Constantinople. Water Science and Technology : Water Supply, 17 (6). pp. 1534-1543. ISSN 1606-9749

Rusthi, Mohamed, Ariyanayagam, Anthony, Mahendran, Mahen and Poologanathan, Keerthan (2017) Fire tests of Magnesium Oxide board lined light gauge steel frame wall systems. Fire Safety Journal, 90. pp. 15-27. ISSN 0379-7112

S

Sadia, T., Rahman, Muhammad, Raudhah, A. and Doh, S. I. (2020) The Effectiveness of Palm Oil Fuel Ash Cement Paste to Control Degradation in Ammonium Nitrate Solution. IOP Conference Series: Materials Science and Engineering, 712. 012024. ISSN 1757-899X

Safari, Davoud, Maheri, Alireza and Maheri, Mahmoud (2011) Optimum design of steel frames using a multiple-deme GA with improved reproduction operators. Journal of Constructional Steel Research, 67 (8). pp. 1232-1243. ISSN 1873-5983

Safari, Davoud, Maheri, Mahmoud and Maheri, Alireza (2013) On the performance of a modified multiple-deme genetic algorithm in LRFD design of steel frames. Iranian Journal of Science and Technology:Transactions of Civil Engineering, 37 (2). pp. 169-190. ISSN 2228-6160

Safiah Yusmah, M. Y., Bracken, Louise J., Sahdan, Z., Norhaslina, H., Melasutra, M. D., Ghaffarianhoseini, A., Sumiliana, S. and Shereen Farisha, A. S. (2020) Understanding urban flood vulnerability and resilience: a case study of Kuantan, Pahang, Malaysia. Natural Hazards, 101 (2). pp. 551-571. ISSN 0921-030X

Saha, Bidyut Baran, El-Sharkawy, Ibrahim I., Shahzad, Muhammad Wakil, Thu, Kyaw, Ang, Li and Ng, Kim Choon (2016) Fundamental and application aspects of adsorption cooling and desalination. Applied Thermal Engineering, 97. pp. 68-76. ISSN 1359-4311

Sampson, Jennifer, Biesta, Mark, Crapper, Martin, Hall, Iain and Shepherd, Alan (2013) Carbon dioxide accounting: 2014 Commonwealth Games Athletes' Village. Proceedings of the Institution of Civil Engineers - Engineering Sustainability, 166 (3). pp. 150-160. ISSN 1478-4629

Santos, Hector, Pesce, Giovanni, Ansell, Martin and Ball, Richard (2015) Limeboo: Lime as a Replacement for Cement in Wall-Framing Systems with Bamboo-Guadua (Bahareque Encementado). In: 16th International Conference on Non-conventional Materials and Technologies (NOCMAT 2015), 10-13 August 2015, Winnipeg.

Santos, Paulo and Poologanathan, Keerthan (2021) The Importance of Stud Flanges Size and Shape on the Thermal Performance of Lightweight Steel Framed Walls. Sustainability, 13 (7). p. 3970. ISSN 2071-1050

Scott, S., Greenwood, David and Stitt, D. (2001) Supply Chain Management. Construction Information Quarterly, 3 (3). pp. 1-4. ISSN 1469-4891

Scott, Steve, Harris, Richard Anthony and Greenwood, David (2004) Assessing the New United Kingdom Protocol for Dealing with Delay and Disruption. Journal of Professional Issues in Engineering Education and Practice, 130 (1). pp. 50-59. ISSN 1052-3928

Seyedzadeh, Saleh, Rahimian, Farzad Pour, Oliver, Stephen, Glesk, Ivan and Kumar, Bimal (2020) Data driven model improved by multi-objective optimisation for prediction of building energy loads. Automation in Construction, 116. p. 103188. ISSN 0926-5805

Shahzad, Muhammad, Shafiq, Muhammad Tariq, Douglas, Dean and Kassem, Mohamad (2022) Digital Twins in Built Environments: An Investigation of the Characteristics, Applications, and Challenges. Buildings, 12 (2). p. 120. ISSN 2075-5309

Sharafati, Ahmad, Haji Seyed Asadollah, Seyed Babak, Motta, Davide and Yaseen, Zaher Mundher (2020) Application of newly developed ensemble machine learning models for daily suspended sediment load prediction and related uncertainty analysis. Hydrological Sciences Journal, 65 (12). pp. 2022-2042. ISSN 0262-6667

Sharafati, Ahmad, Tafarojnoruz, Ali, Motta, Davide and Yaseen, Zaher Mundher (2020) Application of nature-inspired optimization algorithms to ANFIS model to predict wave-induced scour depth around pipelines. Journal of Hydroinformatics, 22 (6). pp. 1425-1451. ISSN 1464-7141

Sharif, Ahlam Ammar, Alshdiefat, Ala’a Saleh, Rana, Muhammad Qasim, Kaushik, Amit and Oladinrin, Olugbenga Timo (2022) Evaluating social sustainability in Jordanian residential neighborhoods: a combined expert-user approach. City, Territory and Architecture, 9 (1). p. 17. ISSN 2195-2701

Sharifi, Ayyoob, Khavarian-Garmsir, Amir Reza and Kummitha, Rama Krishna Reddy (2021) Contributions of Smart City Solutions and Technologies to Resilience against the COVID-19 Pandemic: A Literature Review. Sustainability, 13 (14). p. 8018. ISSN 2071-1050

Shayanfar, Javad, Barros, Joaquim A. and Rezazadeh, Mohammadali (2022) Unified model for fully and partially FRP confined circular and square concrete columns subjected to axial compression. Engineering Structures, 251 (Part A). p. 113355. ISSN 0141-0296

Shayanfar, Javad, Barros, Joaquim A.O. and Rezazadeh, Mohammadali (2023) Analysis-oriented model for partially FRP-and-steel-confined circular RC columns under compression. Engineering Structures, 276. p. 115330. ISSN 0141-0296

Shayanfar, Javad, Kafshgarkolaei, Hassan Jafarian, Barros, Joaquim A.O. and Rezazadeh, Mohammadali (2023) Unified strength model for FRP confined heat-damaged circular and square concrete columns. Composite Structures, 307. p. 116647. ISSN 0263-8223

Shen, Xiang, Avital, Eldad, Paul, Gordon, Rezaienia, Mohammad Amin, Wen, Pihua and Korakianitis, Theodosios (2016) Experimental study of surface curvature effects on aerodynamic performance of a low Reynolds number airfoil for use in small wind turbines. Journal of Renewable and Sustainable Energy, 8 (5). 053303. ISSN 1941-7012

Sherratt, Fred, Crapper, Martin, Foster-Smith, Lydia and Walsh, Sinead (2015) Safety and volunteer construction workers. Construction Management and Economics, 33 (5-6). pp. 361-374. ISSN 0144-6193

Shyha, Islam, Richardson, Alan, Coventry, Kathryn and Ponton, Hazel (2016) Mould release technologies with regard to concrete surface finish. Magazine of Concrete Research, 68 (2). pp. 87-98. ISSN 0024-9831

Shyha, Islam and Rudd, Mark (2016) Electro-discharge machining of metal matrix composite materials. Advances in Materials and Processing Technologies, 2 (2). pp. 235-244. ISSN 2374-068X

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2018) Lateral distortional buckling of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 144. pp. 295-309. ISSN 0143-974X

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2018) Section moment capacity design rules for rivet fastened rectangular hollow flange channel beams. Thin-Walled Structures, 127. pp. 781-797. ISSN 0263-8231

Sing, Michael, Edwards, D. J., Liu, Henry and Love, P. E. D. (2015) Forecasting Private-Sector Construction Works: VAR Model Using Economic Indicators. Journal of Construction Engineering and Management, 141 (11). 04015037. ISSN 0733-9364

Singh, Dharminder, McGlinchey, Don and Crapper, Martin (2016) Breakage Functions of Particles of Four Different Materials Subjected to Uniaxial Compression. Particulate Science and Technology, 34 (4). pp. 494-501. ISSN 0272-6351

Singh, Dharminder, McGlinchey, Don and Crapper, Martin (2015) Breakage Functions of Particles of Four Different Materials Subjected to Uniaxial Compression. In: 8th International Conference for Conveying and Handling of Particulate Solids, 3-7 May 2015, Tel Aviv.

Sinha, Pammi, Rollason, Ed, Bracken, Louise J., Wainwright, John and Reaney, Sim M. (2020) A new framework for integrated, holistic, and transparent evaluation of inter-basin water transfer schemes. Science of the Total Environment, 721. p. 137646. ISSN 0048-9697

Sinicropi, Daniela, Borri, Antonio, Corradi, Marco and Paradiso, Michele (2016) Problems Related to the use of Fiber Reinforced Cementitious Materials as Strengthening of Masonry Members. In: ECCOMAS Congress 2016 - Proceedings of the 7th European Congress on Computational Methods in Applied Sciences and Engineering. National Technical University of Athens, Athens, pp. 5314-5325. ISBN 9786188284401

Sisti, Romina, Corradi, Marco and Borri, Antonio (2016) An experimental study on the influence of composite materials used to reinforce masonry ring beams. Construction and Building Materials, 122. pp. 231-241. ISSN 0950-0618

Steau, Edward, Mahendran, Mahen and Poologanathan, Keerthan (2016) Web crippling tests of rivet fastened rectangular hollow flange channel beams under two-flange load cases. In: Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, SDSS 2016. European Convention for Constructional Steelwork, pp. 411-418. ISBN 9789291471331

Stewart, Douglas I., Bray, Andrew W., Udoma, Gideon, Hobson, Andrew J., Mayes, William M., Rogerson, Michael and Burke, Ian T. (2018) Hydration of dicalcium silicate and diffusion through neo-formed calcium-silicate-hydrates at weathered surfaces control the long-term leaching behaviour of basic oxygen furnace (BOF) steelmaking slag. Environmental Science and Pollution Research, 25 (10). pp. 9861-9872. ISSN 0944-1344

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2018) Design of SupaCee Sections Subject to Web Crippling under One-Flange Load Cases. Journal of Structural Engineering, 144 (12). 04018222. ISSN 0733-9445

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2016) Experimental Studies of Lipped Channel Beams Subject to Web Crippling under Two-Flange Load Cases. Journal of Structural Engineering, 142 (9). 04016058. ISSN 0733-9445

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2017) New design rules for lipped channel beams subject to web crippling under two-flange load cases. Thin-Walled Structures, 119. pp. 421-437. ISSN 0263-8231

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2017) Web crippling experiments of high strength lipped channel beams under one-flange loading. Journal of Constructional Steel Research, 138. pp. 851-866. ISSN 0143-974X

Suntharalingam, Thadshajini, Perampalam, Gatheeshgar, Upasiri, Irindu, Poologanathan, Keerthan, Nagaratnam, Brabha, Rajanayagam, Heshachanaa and Navaratnam, Satheeskumar (2021) Numerical Study of Fire and Energy Performance of Innovative Light-Weight 3D Printed Concrete Wall Configurations in Modular Building System. Sustainability, 13 (4). p. 2314. ISSN 2071-1050

Suntharalingam, Thadshajini, Poologanathan, Keerthan, Nagaratnam, Brabha, Hackney, Philip and Ramli, Jeffri (2021) Effect of Polypropylene fibres on the Workability parameters of Extrudable Cementitious Material. In: ICSECM 2019: Proceedings of the 10th International Conference on Structural Engineering and Construction Management. Lecture Notes in Civil Engineering, 94 (94). Springer, Singapore, pp. 427-435. ISBN 9789811572210, 9789811572227

Suntharalingam, Thadshajini, Upasiri, Irindu, Nagaratnam, Brabha, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Tsavdaridis, Konstantinos and Perera, Dilini (2022) Finite Element Modelling to predict the Fire performance of Bio-inspired 3D Printed Concrete wall panels exposed to realistic fire. Buildings, 12 (2). p. 111. ISSN 2075-5309

Suwondo, Riza, Cunningham, Lee and Gillie, Martin (2020) Modelling progressive failure of steel moment frames exposed to localised fire. IOP Conference Series: Earth and Environmental Science, 426. 012046. ISSN 1755-1315

Suwondo, Riza, Cunningham, Lee, Gillie, Martin and Bailey, Colin (2018) Improving the performance of composite floors subjected to post-earthquake fire. Fire Safety Journal, 102. pp. 18-26. ISSN 0379-7112

Suwondo, Riza, Cunningham, Lee, Gillie, Martin and Bailey, Colin (2019) Progressive collapse analysis of composite steel frames subject to fire following earthquake. Fire Safety Journal, 103. pp. 49-58. ISSN 0379-7112

Suwondo, Riza, Cunningham, Lee, Gillie, Martin, Suangga, Made and Hidayat, Irpan (2021) Model Parameter Sensitivity for Structural Analysis of Composite Slab Structures in Fire. International Journal of Technology, 12 (2). p. 339. ISSN 2086-9614

Suwondo, Riza, Gillie, Martin, Cunningham, Lee and Bailey, Colin (2018) Effect of earthquake damage on the behaviour of composite steel frames in fire. Advances in Structural Engineering, 21 (16). pp. 2589-2604. ISSN 1369-4332

T

Taaffe, Jonathan, O’Sullivan, Seán, Rahman, Muhammad and Pakrashi, Vikram (2014) Experimental characterisation of Polyethylene Terephthalate (PET) bottle Eco-bricks. Materials and Design, 60. pp. 50-56. ISSN 0261-3069

Tait, Michael W. and Cheung, Wai Ming (2016) A comparative cradle-to-gate life cycle assessment of three concrete mix designs. The International Journal of Life Cycle Assessment, 21 (6). pp. 847-860. ISSN 0948-3349

Tarantino, Alessandro, Gallipoli, Domenico, Jommi, Cristina, Mendes, Joao, Capotosto, Anastasia, Amabile, Alessia, Pedrotti, Matteo, Pozzato, Annarita, Beneš, Vojtěch, Bottaro, Fabio, Denzer, Heiner and Boeck, Fabian (2016) Advances in the monitoring of geo-structure subjected to climate loading. E3S Web of Conferences, 9. 04001. ISSN 2267-1242

Thai, Huu-Tai, Nguyen, Trung-Kien, Vo, Thuc and Lee, Jaehong (2014) Analysis of functionally graded sandwich plates using a new first-order shear deformation theory. European Journal of Mechanics - A/Solids, 45. pp. 211-225. ISSN 0997-7538

Thai, Huu-Tai, Nguyen, Trung-Kien, Vo, Thuc and Ngo, Tuan (2017) A new simple shear deformation plate theory. Composite Structures, 171. pp. 277-285. ISSN 0263-8223

Thai, Huu-Tai and Vo, Thuc (2012) Bending and free vibration of functionally graded beams using various higher-order shear deformation beam theories. International Journal of Mechanical Sciences, 62 (1). 57 - 66. ISSN 0020-7403

Thai, Huu-Tai and Vo, Thuc (2013) A new sinusoidal shear deformation theory for bending, buckling, and vibration of functionally graded plates. Applied Mathematical Modelling, 37 (5). 3269 - 3281. ISSN 0307-904X

Thai, Huu-Tai and Vo, Thuc (2012) A nonlocal sinusoidal shear deformation beam theory with application to bending, buckling, and vibration of nanobeams. International Journal of Engineering Science, 54. 58 - 66. ISSN 0020-7225

Thai, Huu-Tai and Vo, Thuc (2013) A size-dependent functionally graded sinusoidal plate model based on a modified couple stress theory. Composite Structures, 96. 376 - 383. ISSN 0263-8223

Thai, Huu-Tai, Vo, Thuc, Bui, Tinh and Nguyen, Trung-Kien (2014) A quasi-3D hyperbolic shear deformation theory for functionally graded plates. Acta Mechanica, 225 (3). pp. 951-964. ISSN 0001-5970

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Size-dependent behaviour of functionally graded sandwich microbeams based on the modified couple stress theory. Composite Structures, 123. pp. 337-349. ISSN 0263-8223

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2014) A nonlocal sinusoidal plate model for micro/nanoscale plates. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (14). pp. 2652-2660. ISSN 0954-4062

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Pham, Cao Hung (2017) Explicit simulation of bolted endplate composite beam-to-CFST column connections. Thin-Walled Structures, 119. pp. 749-759. ISSN 0263-8231

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Patel, Vipulkumar Ishvarbhai (2017) Size-dependant behaviour of functionally graded microplates based on the modified strain gradient elasticity theory and isogeometric analysis. Computers & Structures, 190. 219 - 241. ISSN 0045-7949

Thamboo, Julian, Bandara, Janaka, Perera, Sithara, Navaratnam, Satheeskumar, Poologanathan, Keerthan and Corradi, Marco (2020) Experimental and Analytical Study of Masonry Subjected to Uniaxial Cyclic Compression. Materials, 13 (20). p. 4505. ISSN 1996-1944

Thamboo, Julian, Navaratnam, Satheeskumar, Poologanathan, Keerthan and Corradi, Marco (2021) Characteristics of CFRP Strengthened Masonry Wallettes under Concentric and Eccentric Compression. Case Studies in Construction Materials, 14. e00472. ISSN 2214-5095

Thamboo, Julian, Zahra, Tatheer, Navaratnam, Satheeskumar, Asad, Mohammad and Poologanathan, Keerthan (2021) Prospects of Developing Prefabricated Masonry Walling Systems in Australia. Buildings, 11 (7). p. 294. ISSN 2075-5309

Thanh, Cuong-Le, Tran, Loc V., Bui, Tinh Quoc, Nguyen, Hoang and Abdel-Wahab, M. (2019) Isogeometric analysis for size-dependent nonlinear thermal stability of porous FG microplates. Composite Structures, 221. p. 110838. ISSN 0263-8223

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Meheron, Selowara Joo (2021) Deterioration of marine concrete exposed to wetting-drying action. Journal of Cleaner Production, 278. p. 123383. ISSN 0959-6526

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowara Joo, Meheron (2021) Cyclic compressive behavior of limestone and silicomanganese slag concrete subjected to sulphate attack and wetting-drying action in marine environment. Journal of Building Engineering, 44. p. 103357. ISSN 2352-7102

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowara Joo, Meheron (2020) Mechanical and durability performance of marine sand and seawater concrete incorporating silicomanganese slag as coarse aggregate. Construction and Building Materials, 254. p. 119195. ISSN 0950-0618

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowarajoo, Meheron (2021) Prediction model for hardened state properties of silica fume and fly ash based seawater concrete incorporating silicomanganese slag. Journal of Building Engineering, 41. p. 102356. ISSN 2352-7102

Ting, T. Z. H., Rahman, Muhammad and Lau, H. H. (2020) A Review on One-Way Concrete Wall Under Axial Loading. IOP Conference Series: Materials Science and Engineering, 943. 012033. ISSN 1757-899X

Ting, T.Z.H., Rahman, Muhammad and Lau, H.H. (2019) Compressive Strength of OPS based Self-compacting Concrete Incorporated with Fly Ash under Elevated Temperature. IOP Conference Series: Materials Science and Engineering, 495. 012086. ISSN 1757-899X

Ting, T.Z.H., Rahman, Muhammad, Lau, H.H. and Ting, M.Z.Y. (2019) Recent development and perspective of lightweight aggregates based self-compacting concrete. Construction and Building Materials, 201. pp. 763-777. ISSN 0950-0618

Ting, Timothy Zhi Hong, Rahman, Muhammad and Lau, Hieng Ho (2020) Sustainable lightweight self-compacting concrete using oil palm shell and fly ash. Construction and Building Materials, 264. p. 120590. ISSN 0950-0618

Tiong, Michelle, Gholami, Raoof and Rahman, Muhammad (2019) Cement degradation in CO2 storage sites: a review on potential applications of nanomaterials. Journal of Petroleum Exploration and Production Technology, 9 (1). pp. 329-340. ISSN 2190-0558

Tiwary, Abhishek, Godsmark, K. and Smethurst, J. (2018) Field evaluation of precipitation interception potential of green façades. Ecological Engineering, 122. pp. 69-75. ISSN 0925-8574

Tiwary, Abhishek and Kumar, Prashant (2014) Impact evaluation of green–grey infrastructure interaction on built-space integrity: An emerging perspective to urban ecosystem service. Science of the Total Environment, 487. pp. 350-360. ISSN 0048-9697

Tiwary, Abhishek, Williams, Ian, Pant, Dinesh and Kishore, V. V. N. (2015) Emerging perspectives on environmental burden minimisation initiatives from anaerobic digestion technologies for community scale biomass valorisation. Renewable & Sustainable Energy Reviews, 42. pp. 883-901. ISSN 1364-0321

Tolba, A., El Kafkass, I. and Greenwood, David (2010) Promoting a green Egypt through the design of a sustainable building assessment tool. In: IIE Annual Conference & Expo 2010, 5-9 June 2010, Cancun.

Toll, D. G., Mendes, Joao, Gallipoli, D., Glendinning, S. and Hughes, P. N. (2012) Investigating the impacts of climate change on slopes: field measurements. Geological Society Engineering Geology Special Publications, 26 (1). pp. 151-161. ISSN 0267-9914

Toll, D. G., Mendes, Joao, Hughes, P. N., Glendinning, Stephanie and Gallipoli, Domenico (2012) Climate change and the role of unsaturated soil mechanics. Geotechnical Engineering, 43 (1). pp. 76-82. ISSN 0046-5828

Toll, David G., Lourenço, Sérgio D.N. and Mendes, Joao (2013) Advances in suction measurements using high suction tensiometers. Engineering Geology, 165. pp. 29-37. ISSN 0013-7952

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2016) Concrete strains under transient thermal conditions: A state-of-the-art review. Engineering Structures, 127. pp. 172-188. ISSN 0141-0296

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2018) A confinement-dependent load-induced thermal strain constitutive model for concrete subjected to temperatures up to 500 °C. International Journal of Mechanical Sciences, 144. pp. 887-896. ISSN 0020-7403

Tran, Anh Phuong, Warren, Craig, André, Frédéric, Giannopoulos, Antonios and Lambot, Sebastien (2013) Numerical evaluation of a full-wave antenna model for near-field applications. Near Surface Geophysics, 11 (2). pp. 155-165. ISSN 1569-4445

Trinh, Luan, Nguyen, Hoang, Vo, Thuc and Nguyen, Trung-Kien (2016) Size-dependent behaviour of functionally graded microbeams using various shear deformation theories based on the modified couple stress theory. Composite Structures, 154. pp. 556-572. ISSN 0263-8223

Trinh, Luan, Vo, Thuc, Osofero, Israel and Lee, Jaehong (2016) Fundamental frequency analysis of functionally graded sandwich beams based on the state space approach. Composite Structures, 156. pp. 263-275. ISSN 1879 1085

Trinh, Luan, Vo, Thuc, Thai, Huu-Tai and Nguyen, Trung-Kien (2016) An analytical method for the vibration and buckling of functionally graded beams under mechanical and thermal loads. Composites Part B: Engineering, 100. pp. 152-163. ISSN 1359-8368

Tudor, Dumitrescu, Pesce, Giovanni and Ball, Richard (2017) Optimization of Drilling Resistance Measurement (DRM) user-controlled variables. Materials and Structures, 50 (6). p. 243. ISSN 1359-5997

Turkalj, Goran, Lanc, Domagoj, Banić, Damjan, Brnić, Josip and Vo, Thuc (2018) A shear-deformable beam model for stability analysis of orthotropic composite semi-rigid frames. Composite Structures, 189. pp. 648-660. ISSN 0263-8223

Turner, Ronald J., Bots, Pieter, Richardson, Alan, Bingham, Paul A., Scrimshire, Alex, Brown, Andrew, S’Ari, Mark, Harrington, John, Cumberland, Susan A., Renshaw, Joanna C., Baker, Matthew J., Edwards, Paul R., Jenkins, Cerys and Hamilton, Andrea (2021) (Hydroxy)apatite on cement: insights into a new surface treatment. Materials Advances, 2 (19). pp. 6356-6368. ISSN 2633-5409

Tziviloglou, Eirini, Wiktor, Virginie, Wang, Jianyun, Paine, Kevin, Alazhari, Mohamed, Richardson, Alan, Gueguen, Marielle, De Belie, Nele, Schlangen, Erik and Jonkers, Henk (2016) Evaluation of experimental methodology to asses the sealing efficiency of bacteria based self healing concrete: Round robin test. In: International RILEM Conference on Microorganisms-Cementitious Materials Interactions. RILEM PRO (102). RILEM Publications SARL, Paris, pp. 156-170. ISBN 9782351581605

U

Udeaja, Chika and Tah, Joseph (2002) Collaborative material procurement within the construction supply chain: a multi-agent systems approach. In: The 3rd international conference on Decision Making in Urban and Civil Engineering, 6-8 November 2002, London.

Underwood, Jason, Khosrowshahi, Farzad, Pittard, Steve, Greenwood, David and Platts, Tim (2013) Embedding Building Information Modelling (BIM) within the taught curriculum: Supporting BIM implementation and adoption through the development of learning outcomes within the UK academic context for built environment programmes. Project Report. Higher Education Academy.

Usmani, Asif, Mayne, David and Crapper, Martin (2002) h-adaptivity and "honest" GFEM for advection-dominated transport. Numerical Heat Transfer, Part B: Fundamentals, 41 (3-4). pp. 339-359. ISSN 1040-7790

V

Valluzzi, Maria Rosa, Oliveira, Daniel, Caratelli, Angelo, Castori, Giulio, Corradi, Marco, Felice, Gianmarco, Garbin, Enrico, Garcia, David, Garmendia, Leire, Grande, Ernesto, Ianniruberto, Ugo, Kwiecień, Arkadiusz, Leone, Marianovella, Lignola, Gian Piero, Lourenço, Paulo B., Malena, Marialaura, Micelli, Francesco, Panizza, Matteo, Papanicolaou, Catherine, Prota, Andrea, Sacco, Elio, Triantafillou, Thanasis, Viskovic, Alberto, Zając, Bogusław and Zuccarino, Gina (2012) Round Robin Test for composite-to-brick shear bond characterization. Materials and Structures, 45 (12). pp. 1761-1791. ISSN 1359-5997

Vecchiattini, Rita, Pesce, Giovanni, Quarta, Gianluca and Calcagnile, Lucio (2013) Sampling problems in the radiocarbon dating of old mortars and plasters with the “pure lime lumps” technique. In: Built Heritage 2013: Monitoring Conservation Management, 18th-20th November 2013, Milan.

Verger, Thibault, Azimov, Ulugbek and Adeniyi, Oladapo (2022) Biomass-based fuel blends as an alternative for the future heavy-duty transport: A review. Renewable and Sustainable Energy Reviews, 161. p. 112391. ISSN 1364-0321

Veshareh, Moein Jahanbani, Dolfing, Jan and Nick, Hamidreza M. (2021) Importance of thermodynamics dependent kinetic parameters in nitrate-based souring mitigation studies. Water Research, 206. p. 117673. ISSN 0043-1354

Victoria, Michele (2017) Developing decision support models for early stage embodied carbon management in buildings. Doctoral thesis, Northumbria University.

Videla, Javier, Contreras, Felipe, Nguyen, Hoang and Atroshchenko, Elena (2020) Application of PHT-splines in bending and vibration analysis of cracked Kirchhoff–Love plates. Computer Methods in Applied Mechanics and Engineering, 361. p. 112754. ISSN 0045-7825

Vo, Thuc (2012) Comments on the article: “A new FE model based on higher order zigzag theory for the analysis of laminated sandwich beam with soft core”, by A. Chakrabarti, H. Chalak, M.A. Iqbal, A.H. Sheikh [Composite Structures 93 (2011) 271–279]. Composite Structures, 94 (8). 2666 -2666. ISSN 0263-8223

Vo, Thuc and Banerjee, Ranjan (2015) Free Vibration of Axially Loaded Composite Beams using a Quasi-3D Theory. Civil-Comp Proceedings. p. 108. ISSN 1759-3433

Vo, Thuc, Guan, Zhongwei, Cantwell, Wesley and Schleyer, Graham (2012) Low-impulse blast behaviour of fibre-metal laminates. Composite Structures, 94 (3). 954 - 965. ISSN 0263-8223

Vo, Thuc, Guan, Zhongwei, Cantwell, Wesley and Schleyer, Graham (2013) Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys. Composites Part B: Engineering, 44 (1). 141 - 151. ISSN 1359-8368

Vo, Thuc, Guan, Zhongwei, Cantwell, Wesley and Schleyer, Graham (2012) A parametric study of the low-impulse blast behaviour of fibre-metal laminates based on different aluminium alloys. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

Vo, Thuc and Lee, Jaehong (2008) Analysis of thin-walled composite space frame. In: Symposium of International Association for Shell and Spatial Structures (IASS 2008), Acapulco, Mexico.

Vo, Thuc and Lee, Jaehong (2007) Flexural-torsional behavior of thin-walled closed-section composite box beams. Engineering Structures, 29 (8). 1774 - 1782. ISSN 0141-0296

Vo, Thuc and Lee, Jaehong (2006) Flexural-torsional behavior of thin-walled closed-section composite box beams using shear-deformable beam theory. In: 4th International Symposium on Steel Structure (ISSS 2006), 16-18 November 2006, Seoul, Korea.

Vo, Thuc and Lee, Jaehong (2008) Flexural–torsional behavior of thin-walled composite box beams using shear-deformable beam theory. Engineering Structures, 30 (7). 1958 - 1968. ISSN 0141-0296

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional behavior of thin-walled composite space frames. International Journal of Mechanical Sciences, 51 (11–12). 837 - 845. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2007) Flexural–torsional buckling of thin-walled composite box beams. Thin-Walled Structures, 45 (9). 790 - 798. ISSN 0263-8231

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional coupled vibration and buckling of thin-walled open section composite beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 51 (9-10). 631 - 641. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2011) Free vibration of axially loaded thin-walled composite Timoshenko beams. Archive of Applied Mechanics, 81 (9). pp. 1165-1180. ISSN 0939-1533

Vo, Thuc and Lee, Jaehong (2009) Free vibration of axially loaded thin-walled composite box beams. Composite Structures, 90 (2). 233 - 241. ISSN 1879-1085

Vo, Thuc and Lee, Jaehong (2008) Free vibration of thin-walled composite box beams. Composite Structures, 84 (1). 11 - 20. ISSN 0263-8223

Vo, Thuc and Lee, Jaehong (2007) Geometric non-linear analysis of thin-walled composite box beams. In: Asia-Pacific Conference on FRP in Structures (APFIS 2007), 12-14 December 2007, Hong Kong, China.

Vo, Thuc and Lee, Jaehong (2011) Geometrical nonlinear analysis of thin-walled composite beams using finite element method based on first order shear deformation theory. Archive of Applied Mechanics, 81 (4). pp. 419-435. ISSN 0939-1533

Vo, Thuc and Lee, Jaehong (2009) Geometrically nonlinear analysis of thin-walled composite box beams. Computers & Structures, 87 (3–4). 236 - 245. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear analysis of thin-walled open-section composite beams. Computers & Structures, 88 (5-6). 347 - 356. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear theory of thin-walled composite box beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 52 (1). 65 - 74. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2010) Interaction curves for vibration and buckling of thin-walled composite box beams under axial loads and end moments. International Journal of Mechanical Sciences, 34 (10). 3142 - 3157. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2009) On sixfold coupled buckling of thin-walled composite beams. Composite Structures, 90 (3). 295 - 303. ISSN 0263-8223

Vo, Thuc and Lee, Jaehong (2013) Vibration and buckling of thin-walled composite I-beams with arbitrary lay-ups under axial loads and end moments. Mechanics of Advanced Materials and Structures, 20 (8). pp. 652-665. ISSN 1537-6494

Vo, Thuc, Lee, Jaehong and Ahn, Namshik (2009) On sixfold coupled vibrations of thin-walled composite box beams. Composite Structures, 89 (4). 524 - 535. ISSN 0263-8223

Vo, Thuc, Lee, Jaehong and Lee, Kihak (2010) On triply coupled vibrations of axially loaded thin-walled composite beams. Computers & Structures, 88 (3-4). 144 - 153. ISSN 0045-7949

Vo, Thuc, Lee, Jaehong, Lee, Kihak and Ahn, Namshik (2011) Vibration analysis of thin-walled composite beams with I-shaped cross-sections. Composite Structures, 93 (2). 812 - 820. ISSN 0263-8223

Vo, Thuc, Osofero, Israel, Corradi, Marco and Inam, Fawad (2014) Free vibration of axially loaded functionally graded sandwich beams using refined shear deformation theory. In: ECCM-16th European Conference on Composite Materials, 22 - 26 June 2014, Seville, Spain.

Vo, Thuc and Thai, Huu-Tai (2012) Free vibration of axially loaded rectangular composite beams using refined shear deformation theory. Composite Structures, 94 (11). 3379 - 3387. ISSN 0263-8223

Vo, Thuc and Thai, Huu-Tai (2012) Static behavior of composite beams using various refined shear deformation theories. Composite Structures, 94 (8). 2513 - 2522. ISSN 0263-8223

Vo, Thuc and Thai, Huu-Tai (2012) Vibration and buckling of composite beams using refined shear deformation theory. International Journal of Mechanical Sciences, 62 (1). 67 - 76. ISSN 0020-7403

Vo, Thuc, Thai, Huu-Tai and Inam, Fawad (2013) Axial-flexural coupled vibration and buckling of composite beams using sinusoidal shear deformation theory. Archive of Applied Mechanics, 83 (4). pp. 605-622. ISSN 0939-1533

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien and Inam, Fawad (2013) Static and vibration analysis of functionally graded beams using refined shear deformation theory. Meccanica. pp. 1-14. ISSN 0025-6455

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) Static behaviour of functionally graded sandwich beams using a quasi-3D theory. Composites Part B: Engineering, 68. pp. 59-74. ISSN 1359-8368

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures, 119. 1- 12. ISSN 0263-8223

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Maheri, Alireza and Lee, Jaehong (2014) Finite element model for vibration and buckling of functionally graded sandwich beams based on a refined shear deformation theory. Engineering Structures, 64. 12 - 22. ISSN 0141-0296

W

Wadee, Ahmer, Gardner, Leroy and Osofero, Israel (2013) Design of prestressed stayed columns. Journal of Constructional Steel Research, 80. 287 - 298. ISSN 0143-974X

Wang, Yue, Das, Ridoy, Putrus, Ghanim and Kotter, Richard (2020) Economic evaluation of photovoltaic and energy storage technologies for future domestic energy systems – A case study of the UK. Energy, 203. p. 117826. ISSN 0360-5442

Wanniarachchi, K. S., Mahendran, M. and Poologanathan, Keerthan (2017) Shear behaviour and design of Lipped Channel Beams with non-circular web openings. Thin-Walled Structures, 119. pp. 83-102. ISSN 0263-8231

Warren, Craig, Chiwaridzo, Ngoni and Giannopoulos, Antonios (2014) Radiation characteristics of a high-frequency antenna in different dielectric environments. In: GPR2014 - 15th International Conference on Ground Penetrating Radar, 30th June - 4th July 2014, Brussels, Belgium.

Warren, Craig, Giannakis, Iraklis and Giannopoulos, Antonios (2015) Performance of a Ground Penetrating Radar Antenna in Heterogeneous Environments. In: 8th Congress of the Balkan Geophysical Society, 5th - 8th October 2015, Chania, Crete.

Warren, Craig and Giannopoulos, Antonios (2017) Characterisation of a ground penetrating radar antenna in lossless homogeneous and lossy heterogeneous environments. Signal Processing, 132. pp. 221-226. ISSN 0165-1684

Warren, Craig and Giannopoulos, Antonios (2011) Creating finite-difference time-domain models of commercial ground-penetrating radar antennas using Taguchi's optimization method. Geophysics, 76 (2). G37-G47. ISSN 0016-8033

Warren, Craig and Giannopoulos, Antonios (2016) Experimental and modeled performance of a ground penetrating radar antenna in lossy dielectrics. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 9 (1). pp. 29-36. ISSN 1939-1404

Warren, Craig and Giannopoulos, Antonios (2016) Influence of lossless and lossy, heterogeneous environments on Ground Penetrating Radar antenna behaviour. In: MMS 2015 - IEEE 15th Mediterranean Microwave Symposium, 30th November - 2nd December 2015, Lecce, Italy.

Warren, Craig and Giannopoulos, Antonios (2012) Investigation of the directivity of a commercial ground-penetrating radar antenna using a finite-difference time-domain antenna model. In: GPR2012 - 14th International Conference on Ground Penetrating Radar, 16th - 19th June 2008, Birmingham, UK.

Warren, Craig and Giannopoulos, Antonios (2008) Numerical Modelling Of Commercial GPR Antennas. In: Near Surface 2007 - 13th EAGE European Meeting of Environmental and Engineering Geophysics, 3rd - 5th September 2007, Istanbul, Turkey.

Warren, Craig and Giannopoulos, Antonios (2009) Optimising models of commercial GPR antennas. In: IWAGPR2009 - 5th International Workshop on Advanced Ground Penetrating Radar, 27th - 29th May 2009, Granada, Spain.

Warren, Craig and Giannopoulos, Antonios (2015) gprMax - a Finite-Difference Time-Domain Electromagnetic Simulator. In: 8th European Conference on Python in Science, 26th - 30th August 2015, Cambridge, UK.

Warren, Craig, Giannopoulos, Antonios, Diamanti, Nectaria and Annan, Peter (2015) An extension module to embed commercially sensitive antenna models in GprMax. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Warren, Craig, Giannopoulos, Antonios and Giannakis, Iraklis (2015) An advanced GPR modelling framework: The next generation of gprMax. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Warren, Craig, Giannopoulos, Antonios and Giannakis, Iraklis (2016) gprMax: Open source software to simulate electromagnetic wave propagation for ground penetrating radar. Computer Physics Communications, 209. pp. 163-170. ISSN 0010-4655

Warren, Craig and Giannopoulos, Antonis (2012) Simulating Commercial GPR antennas: How close can we get? In: GPR2012 - 14th International Conference on Ground Penetrating Radar, 16th - 19th June 2008, Birmingham, UK.

Warren, Craig, Pajewski, Lara, Poljak, Dragan, Ventura, Alessio, Giannopoulos, Antonios and Šesnić, Silvestar (2016) A comparison of finite-difference, finite-integration, and integral-equation methods in the time-domain for modelling ground penetrating radar antennas. In: GPR2016 - 16th International Conference on Ground Penetrating Radar, 13th - 16th June 2016, Hong Kong, China.

Warren, Craig, Pajewski, Lara, Ventura, Alessio and Giannopoulos, Antonios (2016) An evaluation of Finite-Difference and Finite-Integration Time-Domain modelling tools for Ground Penetrating Radar antennas. In: EuCAP 2016 - 10th European Conference on Antennas and Propagation, 10th - 15th April 2016, Davos, Switzerland.

Warren, Craig, Šesnić, Silvestar, Ventura, Alessio, Pajewski, Lara, Poljak, Dragan and Giannopoulos, Antonios (2017) Comparison of Time-Domain Finite-Difference, Finite-Integration, and Integral-Equation Methods for Dipole Radiation in Half-Space Environments. Progress In Electromagnetics Research M, 57. pp. 175-183. ISSN 1937-8726

Wedawatta, Gayan and Ingirige, Bingunath (2016) A conceptual framework for understanding resilience of construction SMEs to extreme weather events. Built Environment Project and Asset Management, 6 (4). pp. 428-443. ISSN 2044-124X

Wedawatta, Gayan, Ingirige, Bingunath, Jones, Keith and Proverbs, David (2011) Extreme weather events and construction SMEs. Structural Survey, 29 (2). pp. 106-119. ISSN 0263-080X

Wei, Bo, Trigoni, Niki and Markham, Andrew (2022) iMag+: An Accurate and Rapidly Deployable Inertial Magneto-Inductive SLAM System. IEEE Transactions on Mobile Computing, 21 (10). pp. 3644-3655. ISSN 1536-1233

Weise, Matthias, Liebich, Thomas, Nisbet, Nicholas and Benghi, Claudio (2016) IFC model checking based on mvdXML 1.1. In: 11th European Conference on Product & Process Modeling, CPPM, 7 - 9 September 2016, Limassol, Cyprus.

Wijegunarathna, E. E., Wedawatta, Gayan, Prasanna, L. J. and Ingirige, Bingunath (2018) Long-term satisfaction of resettled communities: An assessment of physical performance of post-disaster housing. Procedia Engineering, 212. pp. 1147-1154. ISSN 1877-7058

Wu, Tong and Crapper, Martin (2009) Simulation of biopile processes using a hydraulics approach. Journal of Hazardous Materials, 171 (1-3). pp. 1103-1111. ISSN 0304 3894

Wu, Tong and Crapper, Martin (2009) A computational fluid dynamics based model of the ex-situ remediation of hydrocarbon contaminated soils. Desalination, 248 (1-3). pp. 262-270. ISSN 0011 9164

X

Xiao, Jie, Zhao, Jianfeng, Luo, Zhiwen, Liu, Fang and Greenwood, David (2022) The impact of built environment on mental health: A COVID-19 lockdown perspective. Health & Place, 77. p. 102889. ISSN 1353-8292

Y

Yayla, Alperen, Świerczewska, Kübra, Kaya, Mahmut, Karaca, Bahadır, Arayici, Yusuf, Ayözen, Yunus and Tokdemir, Onur (2022) Artificial Intelligence (AI)-Based Occupant-Centric Heating Ventilation and Air Conditioning (HVAC) Control System for Multi-Zone Commercial Buildings. Sustainability, 14 (23). p. 16107. ISSN 2071-1050

Z

Zhang, Jianxin, Huang, Yao, Cheng, Hengda, Chen, Huanxin, Lu, Xin and He, Yuxuan (2023) Ensemble learning-based approach for residential building heating energy prediction and optimization. Journal of Building Engineering, 67. p. 106051. ISSN 2352-7102

Zhang, Long, Bibi, Farzana, Hussain, Imtiyaz, Sultan, Muhammad, Arshad, Adeel, Hasnain, Saqib, Alarifi, Ibrahim M., Alamir, Mohammed A. and Sajjad, Uzair (2022) Evaluating the Stress-Strain Relationship of the Additively Manufactured Lattice Structures. Micromachines, 14 (1). p. 75. ISSN 2072-666X

Zhang, Yajing, Yuan, Jingfeng, Zhao, Jianfeng, Cheng, Li and Li, Qiming (2022) Hybrid Dynamic Pricing Model for Transport PPP Projects during the Residual Concession Period. Journal of Construction Engineering and Management, 148 (2). 04021200. ISSN 0733-9364

Zhao, Jianfeng, Feng, Haibo, Chen, Qian and Garcia de Soto, Borja (2022) Developing a conceptual framework for the application of digital twin technologies to revamp building operation and maintenance processes. Journal of Building Engineering, 49. p. 104028. ISSN 2352-7102

Zheng, Feng, Shao, Ling, Racic, Vitomir and Brownjohn, James (2016) Measuring human-induced vibrations of civil engineering structures via vision-based motion tracking. Measurement, 83. pp. 44-56. ISSN 0263-2241

Zhou, Zhenxin, Chen, Huanxin, Xing, Lu, Li, Guannan and Gou, Wei (2022) An experimental study of the behavior of a model variable refrigerant flow system with common faults. Applied Thermal Engineering, 202. p. 117852. ISSN 1359-4311