Items where Subject is "H400 Aerospace Engineering"

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Jump to: A | B | C | D | E | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | X | Y | Z
Number of items at this level: 180.

A

Abderrahmane, Belkallouche, Rezoug, Tahar and Dala, Laurent (2019) Passive control of cavity acoustics via the use of surface waviness at subsonic flow. Aircraft Engineering and Aerospace Technology, 91 (2). pp. 296-308. ISSN 0002-2667

Angelis, Dimitrios, Warren, Craig, Diamanti, Nectaria, Martin, James and Annan, Peter (2021) Challenges and opportunities from large volume, multi-offset Ground Penetrating Radar data. In: EGU General Assembly 2021 (vEGU21): Gather Online, 19-30 Apr 2021, online.

Atif, Rasheed and Inam, Fawad (2016) Fractography analysis of monolithic epoxy with tailored topography. World Journal of Engineering and Technology, 4 (4). pp. 517-527. ISSN 2331-4249

Atkins, M. D., Dala, Laurent and Kim, T. (2016) Time-Averaged Behavior of Gap Flow Between Two Side-by-Side Circular Cylinders. AIAA Journal, 54 (9). pp. 2742-2754. ISSN 0001-1452

B

Bagali, Rahul, Zhang, Li and Maheri, Alireza (2013) Effect of different bend-twist coupling topologies on induced twist and cost of wind turbine adaptive blades. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas and Isikveren, Askin (2009) Integrated hardware and software optimization of conceptual flight control system development. In: Canadian Aeronautics and Space Institute (CASI) Aircraft Design and Development Symposium, 5-8 May 2009, Kanata, Ontario, Canada.

Beaverstock, Christopher, Maheri, Alireza, Richardson, Thomas, Lowenberg, Mark and Isikveren, Askin (2009) Methods for conceptual flight control system design. In: 47th AIAA Aerospace Sciences Meeting, 5-8 January 2009, Orlando, Florida.

Beaverstock, Christopher, Richardson, Thomas, Isikveren, Askin and Maheri, Alireza (2010) Complete flight control system integration and optimisation from a conceptual design phase. In: 27th Congress of the International Council of the Aeronautical Sciences, 19-24 September 2010, Nice, France.

Beaverstock, Christopher, Richardson, Thomas, Maheri, Alireza and Isikveren, Askin (2012) Integrated flight control system development using CEASIOM. Canadian Aeronautics and Space Journal, 58 (1). pp. 29-46. ISSN 1712-7998

Berry, Andrew, Howitt, Jeremy, Gu, Da-Wei and Postlethwaite, Ian (2010) Enabling the operation of multiple micro-air-vehicles in increasingly complex obstacle-rich environments. In: AIAA Infotech@Aerospace 2010. American Institute of Aeronautics and Astronautics, Reston, VA, USA. ISBN 9781600869631

Bibi, Atiqa, Maqsood, Adnan, Sherbaz, Salma and Dala, Laurent (2017) Drag reduction of supersonic blunt bodies using opposing jet and nozzle geometric variations. Aerospace Science and Technology, 69. pp. 244-256. ISSN 1270-9638

Bigoni, Davide, Tommasini, Mirko, Misseroni, Diego, Kirillov, Oleg and Noselli, Giovanni (2018) Flutter and divergence instability in the Pflüger column: Experimental evidence of the Ziegler destabilization paradox. Journal of the Mechanics and Physics of Solids, 116. pp. 99-116. ISSN 0022-5096

Brieger, Oliver, Kerr, Murray, Postlethwaite, Ian, Turner, Matthew and Sofrony, Jorge (2012) Pilot-involved-oscillation suppression using low-order anti-windup: flight test evaluation. AIAA Journal of Guidance, Control and Dynamics, 35 (2). pp. 471-483. ISSN 0731-5090

Brooks, David H., Winebarger, Amy R., Savage, Sabrina, Warren, Harry P., De Pontieu, Bart, Peter, Hardi, Cirtain, Jonathan W., Golub, Leon, Kobayashi, Ken, McIntosh, Scott W., McKenzie, David, Morton, Richard, Rachmeler, Laurel, Testa, Paola, Tiwari, Sanjiv and Walsh, Robert (2020) The Drivers of Active Region Outflows into the Slow Solar Wind. The Astrophysical Journal, 894 (2). p. 144. ISSN 1538-4357

C

Chang, Shinan, Leng, Mengyao, Wu, Hongwei and Thompson, James (2016) Aircraft Ice Accretion Prediction Using Neural Network and Wavelet Packet Transform. Aircraft Engineering and Aerospace Technology, 88 (1). pp. 128-136. ISSN 0002-2667

Choutri, Kheireddine, Lagha, Mohand and Dala, Laurent (2019) Multi-Layered Optimal Navigation System For Quadrotors UAV. Aircraft Engineering and Aerospace Technology, 92 (2). pp. 145-155. ISSN 1748-8842

Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2018) Quadrotors UAVs Swarming Control Under Leader-Followers Formation. In: 2018 22nd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, pp. 794-799. ISBN 978-1-5386-4445-4

Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2017) Quadrotors trajectory tracking using a differential flatness-quaternion based approach. In: Proceedings of the 2017 7th International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO). IEEE. ISBN 9781509054541

Combrinck, Madeleine, Dala, Laurent and Lipatov, Igor (2017) Non-inertial forces in aero-ballistic flow and boundary layer equations. R&D Journal of the South African Institution of Mechanical Engineering, 33. pp. 85-96. ISSN 0257-9669

Cui, Bai, Sa, Rafael, Jayaseelan, Daniel, Inam, Fawad, Reece, Michael and Lee, William Edward (2010) Microstructural evolution during high-temperature oxidation of Ti2AlN ceramics. Advances in Science and Technology, 65. pp. 106-111. ISSN 1662-0356

Cui, Bai, Sa, Rafael, Jayaseelan, Daniel, Inam, Fawad, Reece, Michael and Lee, William Edward (2012) Microstructural evolution during high-temperature oxidation of spark plasma sintered Ti2AlN ceramics. Acta Materialia, 60 (3). pp. 1079-1092. ISSN 1359-6454

D

Dala, Laurent, Combrinck, Madeleine, Lipatov, I.I. and Ustinov, I.N. (2021) The effect of the cone rotation in the supersonic gas flow on the velocity propagation of perturbations in the boundary layer. Acta Astronautica, 179. pp. 209-212. ISSN 0094-5765

E

Ebrahim, Hesham and Dominy, Robert (2021) The Effect of Afterbody Geometry on Passenger Vehicles in Platoon. Energies, 14 (22). p. 7553. ISSN 1996-1073

Ebrahim, Hesham and Dominy, Robert (2020) Wake and surface pressure analysis of vehicles in platoon. Journal of Wind Engineering and Industrial Aerodynamics, 201. p. 104144. ISSN 0167-6105

G

Gao, Shang, Dai, Xuewu, Hang, Yu, Guo, Yuyan and Ji, Qian (2018) Airborne Wireless Sensor Networks for Airplane Monitoring System. Wireless Communications and Mobile Computing, 2018. p. 6025825. ISSN 1530-8669

Giannakis, Iraklis, Zhou, Feng, Warren, Craig and Giannopoulos, Antonios (2021) A Novel Radar Processing Tool for Estimating the Permittivity Profile of the Shallow Lunar Ejecta: A Case Study at the Von Kármán Crater. In: EGU General Assembly 2021 (vEGU21): Gather Online, 19-30 Apr 2021, online.

Gosling, Timothy, Jin, Nanlin and Tsang, Edward (2005) Population Based Incremental Learning with Guided Mutation Versus Genetic Algorithms: Iterated Prisoners Dilemma. In: Congress on Evolutionary Computation, 2 - 5 September 2005, Edinburgh, Scotland.

Gu, Da-Wei, Kim, Yoonsoo and Postlethwaite, Ian (2010) How tight is sphere-packed formation flying? Journal of Aerospace Engineering, 224 (4). pp. 427-435. ISSN 0954-4100

H

Hamissi, A., Busawon, Krishna, Dala, Laurent, Bouzid, Y., Zaouche, M. and Hamerlain, M. (2021) A New Nonlinear Control Design Strategy for Fixed Wing Aircrafts Piloting. Unmanned Systems, 09 (04). pp. 293-308. ISSN 2301-3850

Hao, Zhenyang, Cao, Xin, Deng, Xu and Shen, Xiang (2020) Novel Bearingless Switched Reluctance Motor with Wide Flat Inductance Region to Simplify the Control of Torque and Levitation Force. IEEE Transactions on Energy Conversion, 35 (3). pp. 1278-1288. ISSN 0885-8969

Hasan, Reaz and Puthukkudi, Agin (2013) Numerical study of effusion cooling on an adiabatic flat plate. Propulsion and Power Research, 2 (4). pp. 269-275. ISSN 2212-540X

Herrmann, Guido, Hredzak, Branislav, Turner, Matthew, Postlethwaite, Ian and Guo, Guoxiao (2008) Discrete Robust Anti-Windup to Improve a Novel Dual-Stage Large-Span Track-Seek/Following Method. IEEE Transactions on Control Systems Technology, 16 (6). pp. 1342-1351. ISSN 1063-6536

I

Inam, Fawad (2014) Carbon nanotechnology for future aerospace. In: International Conference on Nanomaterials and Nanotechnology 2014 (ICNN-2014), 7-9 April 2014, Karachi, Pakistan.

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Inam, Fawad (2012) E‐learning for aerospace apprentices studying materials engineering: a teacher’s perspective. In: 4th International Materials Education Symposium, 12-13 April, 2012, Cambridge, UK.

Inam, Fawad, Bhat, Badekai Ramachandra, Luhyna, Nataliia and Vo, Thuc (2014) Comparison of structural health assessment capabilities in epoxy – carbon black and epoxy – carbon nanotube nanocomposites. Express Polymers Letters, 8 (1). pp. 55-61. ISSN 1788-618X

Inam, Fawad, Bhat, Badekai Ramachandra, Vo, Thuc and Daoush, Walid (2014) Structural health monitoring capabilities in ceramic – carbon nanocomposites. Ceramics International, 40 (2). pp. 3793-3798. ISSN 0272-8842

Inam, Fawad and Okolo, Chichi (2016) Fullerenes for enhanced performance of novel nano-exploited aircraft materials. In: 14th Eurasia Conference on Chemical Sciences (EuAsC2S), 15th - 18th December 2016, Karachi, Pakistan.

Inam, Fawad, Vo, Thuc, Jones, Jonathan and Lee, Xu (2013) Effect of carbon nanotube lengths on the mechanical properties of epoxy resin: an experimental study. Journal of Composite Materials, 47 (19). pp. 2321-2330. ISSN 0021-9983

Inam, Fawad, Vo, Thuc and Kumara, Saman (2012) Improving oxidation resistance of carbon nanotube nanocomposites for aerospace applications. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

Inam, Fawad, Wong, Doris, Kuwata, Manabu and Peijs, Ton (2010) Multiscale hybrid micro-nanocomposites based on carbon nanotubes and carbon fibers. Journal of Nanomaterials, 2010. p. 453420. ISSN 1687-4110

Inam, Fawad, Yan, Haixue, Peijs, Ton and Reece, Michael (2007) Improving oxidation resistance of carbon nanotubes for sensing applications. In: CNT @ Symposium: A Mini-Symposium on the Science and Application of Carbon Nanotubes, 30 November 2007, Churchill College, University of Cambridge.

J

Jackson, Heather, Jayaseelan, Daniel, Clegg, William, Reece, Michael, Inam, Fawad, Manara, Dario, Casoni, Carlo Perinetti and Lee, William Edward (2010) Microstructure of laser-melted zirconium carbide ceramics. In: Advances in Materials Science for Environmental and Nuclear Technology. Ceramic Transactions, 222 . Wiley, Hoboken, pp. 113-125. ISBN 978-0-470-92729-8

Jiang, Qinghui, Yan, Haixue, Khaliq, Jibran, Ning, Huanpo, Grasso, Salvatore, Simpson, Kevin and Reece, Michael (2014) Large ZT enhancement in hot forged nanostructured p-type Bi0.5Sb1.5Te3 bulk alloys. Journal of Material Chemistry A, 2 (16). pp. 5785-5790. ISSN 2050-7488

K

Kahwash, Fadi and Maheri, Alireza (2013) A genetic algorithm for optimal distribution of aerofoils on wind turbine blades. In: 1st International Conference on Engineering of Tarumanagara (ICET 2013), 2-3 October 2013, Jakarta.

Kim, Jongrae, Bates, Declan, Postlethwaite, Ian, Heslop-Harrison, Pat and Cho, Kwang-Hyun (2008) Linear-time varying models can reveal non-linear interactions of biomolecular regulatory networks using multiple time-series data. Bioinformatics, 24 (10). pp. 1286-1292. ISSN 1367-4803

Kim, Yoonsoo, Da-Wei, Gu and Postlethwaite, Ian (2008) Real-time path planning with limited information for automonous unmanned air vehicles. Automatica, 44 (3). pp. 696-712. ISSN 0005-1098

Kim, Yoonsoo, Gu, Da-Wei and Postlethwaite, Ian (2007) Optimal average consensus on multi-agent networks. In: 17th IFAC Symposium on Automatic Control in Aerospace, 25-29 June 2007, Toulouse, France.

Kirillov, Oleg, Bigoni, Davide, Misseroni, Diego, Noselli, Giovanni and Tommasini, Mirko (2017) Experiments on the Pfluger column: flutter from friction. In: First International Symposium on Flutter and its Application, 15th-17th May , 2016, Mielparque-Tokyo, Minato-ku, Tokyo, Japan.

Kirillov, Oleg and Pelinovsky, Dmitry (2014) Nonlinear Physical Systems: Spectral Analysis, Stability and Bifurcations. Wiley, London. ISBN 9781848214200

Kirillov, Oleg and Seyranian, Alexander (1998) Optimization of stability of a flexible missile under follower thrust. In: 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 02 September 1998 - 04 September 1998, St. Louis, MO, U.S.A..

L

Labarbe, Joris and Kirillov, Oleg (2020) Membrane flutter induced by radiation of surface gravity waves on a uniform flow. Journal of Fluid Mechanics, 901. A4. ISSN 0022-1120

Lanc, Domagoj, Vo, Thuc, Turkalj, Goran and Lee, Jaehong (2015) Buckling analysis of thin-walled functionally graded sandwich box beams. Thin-Walled Structures, 86. 148 - 156. ISSN 0263-8231

Li, Ping and Postlethwaite, Ian (2011) Subspace and bootstrap-based techniques for helicopter model identification. Journal of the American Helicopter Society, 56 (1). pp. 12002-12013. ISSN 0002-8711

Li, Xingquan, Pan, Cunhua, Zhang, Chiya, He, Chunlong and Wang, Kezhi (2020) Data Rate Maximization in UAV-Assisted C-RAN. IEEE Wireless Communications Letters, 9 (12). pp. 2163-2167. ISSN 2162-2337

Lindenroth, Luke, Caplan, Nick, Debuse, Dorothée, Salomoni, Sauro Emerick, Evetts, Simon and Weber, Tobias (2015) A novel approach to activate deep spinal muscles in space - results of a biomechanical model. Acta Astronautica, 116. pp. 202-210. ISSN 0094-5765

Liu, Dongdong, Tao, Zhi, Luo, Xiang, Wu, Hongwei and Yu, Xiao (2016) Development of a new factor for hot gas ingestion through rim seal. Journal of Engineering for Gas Turbines and Power, 138 (7). 072501. ISSN 0742-4795

Liu, Xiaoxu, Gao, Zhiwei and Zhang, Aihua (2018) Robust Fault Tolerant Control for Discrete-Time Dynamic Systems With Applications to Aero Engineering Systems. IEEE Access, 6. pp. 18832-18847. ISSN 2169-3536

Luhyna, Nataliia and Inam, Fawad (2012) Carbon nanotubes for epoxy Nanocomposites: a review on recent developments. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

Luhyna, Nataliia, Vo, Thuc and Inam, Fawad (2013) Carbon nanotubes for next generation aircraft materials. In: Third International Conference on Aerospace Science and Engineering (ICASE-2013), 21-23 August 2013, Islamabad, Pakistan.

M

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2012) Improvement of the accuracy of the blade element momentum theory method in wind turbine aerodynamics analysis. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 402-405. ISBN 978-1467329095

Macquart, Terence, Maheri, Alireza and Busawon, Krishna (2014) Microtab dynamic modelling for wind turbine blade load rejection. Renewable Energy, 64. pp. 144-152. ISSN 0960-1481

Maheri, Alireza (2013) Utilising implanted carbon fibre as a resistive heating element in wind turbine blade anti-icing systems. In: Materials Characterisation VI: Computational Methods and Experiments. WIT Transactions on Engineering Sciences, VI . WIT Press, Southampton, pp. 297-307. ISBN 978-1845647209

Maheri, Alireza (2012) A finite element suite for deformation analysis of composite aeroelastic structures subjected to operational aerodynamic loading. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (8). pp. 2062-2076. ISSN 0954-4062

Maheri, Alireza, Bagali, Rahul, Chilak, C., Scheller, F. and Mustafa, A. I. (2012) Deterministic versus nondeterministic design of hybrid renewable energy systems. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 212-217. ISBN 978-1467329095

Maheri, Alireza and Daadbin, Ali (2010) High performance finite element analysis of composite aeroelastic structures. In: High Performance Structures and Materials V. WIT transactions on the built environment, 112 . WIT Press, Southampton, UK, pp. 15-26. ISBN 978-1845644642

Maheri, Alireza and Isikveren, Askin (2011) Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226 (6). pp. 1633-1643. ISSN 0954-4062

Maheri, Alireza and Isikveren, Askin (2009) Design of wind turbine passive smart blades. In: European Wind Energy Conference (EWEC 2009), 16-19 March 2009, Marseille, France.

Maheri, Alireza and Isikveren, Askin (2013) Educated search-A generic platform for partial modification at conceptual design phase of multidisciplinary problems. Computer-Aided Design, 45 (6). pp. 991-1004. ISSN 0010-4485

Maheri, Alireza and Isikveren, Askin (2008) Facilitating meta-design techniques for multi-disciplinary conceptual design. In: Adaptive Computing in Design and Manufacture, April 2008, Bristol.

Maheri, Alireza and Isikveren, Askin (2010) Performance prediction of wind turbines utilizing passive smart blades: approaches and evaluation. Wind Energy, 12 (2/3). pp. 255-265. ISSN 1095-4244

Maheri, Alireza and Isikveren, Askin (2008) Variable-state design parameters in design of aero-structures made of intrinsically smart materials. In: High Performance Structures and Materials IV. WIT transactions on the built environment, . WIT Press, Southampton, UK, pp. 421-430. ISBN 978-1845641061

Maheri, Alireza and Isikveren, Askin (2009) A parallel genetic algorithm for optimal synthesis of a morphing aerofoil. In: Proceedings of the First International Conference on Parallel, Distributed and Grid Computing for Engineering (PARENG2009), 6-8 April 2009, Pécs, Hungary.

Maheri, Alireza, Macquart, Terence, Safari, Davoud and Maheri, Mahmoud (2012) Phenotype building blocks and geometric crossover in structural optimisation. In: ECT2012: Eighth international conference on engineering computational technology, 4-7 September 2012, Dubrovnik.

Maheri, Alireza and Maheri, Mahmoud (2007) Optimum geometry design of plane trusses supporting distributed loads using genetic algorithms. In: 9th International Conference on the Application of Artificial Intelligence to Civil, Structural and Environmental Engineering, 18-21 September 2007, Malta.

Maheri, Alireza and Maheri, Mahmoud (2012) A robust method for integrated design of trusses supporting distributed loads. Engineering Structures, 40. pp. 339-349. ISSN 0141-0296

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Damping the fluctuating behaviour and improving the convergence rate of the axial induction factor in the BEMT-based rotor aerodynamic codes. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2007) Efficient meshing of a wind turbine blade using force adaptive mesh sizing functions. Renewable Energy, 32 (1). pp. 95-104. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) Single step versus coupled aero-structure simulation of a wind turbine with bend-twist adaptive blades. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) WTAB, a computer program for predicting the performance of horizontal axis wind turbines with adaptive blades. Renewable Energy, 31 (11). pp. 1673-1685. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak, Toomer, Chris and Vinney, John (2006) A simple algorithm to modify an ordinary wind turbine blade to an adaptive one. In: European Wind Energy Conference, 27 February-2 March 2006, Athens.

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Application of combined analytical/FEA coupled aero-structure simulation in design of wind turbine adaptive blades. Renewable Energy, 32 (12). pp. 2011-2018. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Combined analytical/FEA-based coupled aero structure simulation of a wind turbine with bend–twist adaptive blades. Renewable Energy, 32 (6). pp. 916-930. ISSN 0960-1481

Maheri, Alireza, Noroozi, Siamak and Vinney, John (2007) Decoupled aerodynamic and structural design of wind turbine adaptive blades. Renewable Energy, 32 (10). pp. 1753-1767. ISSN 0960-1481

Marcos, Andrés, Bates, Declan and Postlethwaite, Ian (2007) A symbolic matrix decomposition algorithm for reduced order linear fractional transformation modelling. Automatica, 43 (7). pp. 1211-1218. ISSN 0005-1098

Marcos, Andrés, Turner, Matthew and Postlethwaite, Ian (2006) High-performance architecture for design and analysis of robust anti-windup compensators. In: American Control Conference 2006, 24-26 June 2006, Minneapolis, USA.

Masri, Jafar (2020) An Investigation into Dynamic Stability of Waterborne Aircraft on Take-off and Landing. Doctoral thesis, Northumbria University.

Masri, Jafar, Dala, Laurent and Huard, Benoit (2019) A Review of the Analytical Methods used for Seaplanes Performance Prediction. Aircraft Engineering and Aerospace Technology, 91 (6). pp. 820-833. ISSN 1748-8842

Masri, Jafar, Dala, Laurent and Huard, Benoit (2018) A Review of the Analytical Methods used for Seaplanes Performance Prediction. In: 6th Aircraft Structural Design Conference, 9-11 October 2018, Bristol.

Mechali, Omar, Iqbal, Jamshed, Xie, Xiaomei, Xu, Limei and Senouci, Abdelkader (2021) Robust Finite-Time Trajectory Tracking Control of Quadrotor Aircraft via Terminal Sliding Mode-Based Active Antidisturbance Approach: A PIL Experiment. International Journal of Aerospace Engineering, 2021. pp. 1-28. ISSN 1687-5966

Meijer, Marius-Corné and Dala, Laurent (2018) Local Piston Theory as an Alternative to Mesh Deformation: Slender Wing/Body Configurations. Journal of Aircraft, 55 (4). pp. 1709-1719. ISSN 0021-8669

Meijer, Marius-Corné and Dala, Laurent (2019) On The Role of Higher-Order Terms in Local Piston Theory. Journal of Aircraft, 56 (1). pp. 388-391. ISSN 0021-8669

Meijer, Marius-Corné and Dala, Laurent (2017) Quantifying non-linearity in planar supersonic potential flows. The Aeronautical Journal, 121 (1237). pp. 372-394. ISSN 0001-9240

Meijer, Marius-Corné and Dala, Laurent (2015) Zeroth-order flutter prediction for cantilevered plates in supersonic flow. Journal of Fluids and Structures, 57. pp. 196-205. ISSN 0889-9746

Menon, Prathyush, Bates, Declan and Postlethwaite, Ian (2007) Nonlinear robustness analysis of flight control laws for highly augmented aircraft. Control Engineering Practice, 15 (6). pp. 655-662. ISSN 0967-0661

Menon, Prathyush, Postlethwaite, Ian, Bennani, Samir, Marcos, Andrés and Bates, Declan (2009) Robustness analysis of a reusable launch vehicle flight control law. Control Engineering Practice, 17 (7). pp. 751-765. ISSN 0967-0661

N

Natesan, Kannan, Gu, Da-Wei and Postlethwaite, Ian (2010) Design of linear parameter varying trajectory tracking controllers for an unmanned air vehicle. Journal of Aerospace Engineering, 224 (4). pp. 395-402. ISSN 0954-4100

Natesan, Kannan, Gu, Da-Wei and Postlethwaite, Ian (2007) Design of static H8 linear parameter varying controllers for unmanned aircraft. AIAA Journal of Guidance, Control and Dynamics, 30 (6). pp. 1829-1835. ISSN 0731-5090

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Nonlinear Frequency Domain Solution Method for Aerodynamic and Aeromechanical Analysis of Wind Turbines. Renewable Energy, 167. pp. 66-81. ISSN 0960-1481

Newnes, Linda, Mileham, Antony, Cheung, Wai Ming and Goh, Yee Mey (2011) Through Life Costing. In: Service Design and Delivery. Service Science: research and innovations in the service economy . Springer, London, pp. 135-151. ISBN 978-1441983213

Nguyen, Kien, Thai, Huu-Tai and Vo, Thuc (2015) A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates. Steel and Composite Structures, 18 (1). pp. 91-120. ISSN 1229-9367

Nguyen, Trung-Kien, Nguyen, Ba-Duy, Vo, Thuc and Thai, Huu-Tai (2017) Hygro-thermal effects on vibration and thermal buckling behaviours of functionally graded beams. Composite Structures, 176. pp. 1050-1060. ISSN 0263-8223

Nguyen, Trung-Kien, Nguyen, T. Truong-Phong, Vo, Thuc and Thai, Huu-Tai (2015) Vibration and buckling analysis of functionally graded sandwich beams by a new higher-order shear deformation theory. Composites Part B: Engineering, 76. 273- 285. ISSN 1359-8368

Nguyen, Trung-Kien, Vo, Thuc and Thai, Huu-Tai (2013) Static and free vibration of axially loaded functionally graded beams based on the first-order shear deformation theory. Composites Part B: Engineering, 55. 147 - 157. ISSN 1359-8368

Nguyen, Van-Hau, Nguyen, Trung-Kien, Thai, Huu-Tai and Vo, Thuc (2014) A new inverse trigonometric shear deformation theory for isotropic and functionally graded sandwich plates. Composites Part B: Engineering, 66. pp. 233-246. ISSN 1359-8368

O

Osofero, Israel, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Analytical solution for vibration and buckling of functionally graded sandwich beams using various quasi-3D theories. Journal of Sandwich Structures and Materials, 18 (1). pp. 3-29. ISSN 1099-6362

P

Poprawa, Stefan and Dala, Laurent (2021) Monte Carlo Simulation of Supply and Demand for Payload Limited Routes. R&D Journal of the South African Institution of Mechanical Engineering, 37. pp. 1-8. ISSN 0257-9669

Postlethwaite, Ian, Gu, Da-Wei, Kim, Yoonsoo, Natesan, Kannan, Kothari, Mangal, Khan, Nishat and Omar, R. (2008) A robust fault-tolerant tracking scheme. In: RNEC '08: Realising Network Enabled Capability, 13-14 October 2008, Leeds, UK.

Prempain, Emmanuel and Postlethwaite, Ian (2008) L2 and H2 performance analysis and gain-scheduling synthesis for parameter-dependent systems. Automatica, 44 (8). pp. 2081-2089. ISSN 0005-1098

R

Rahmati, Mohammad (2016) Comparison of frequency domain and time-domain methods for aeromechanical analysis. International Journal of Rotating Machinery, 2016. p. 4293414. ISSN 1023-621X

Rahmati, Mohammad, He, L. and Li, Y. S. (2016) The Blade Profile Orientations Effects on the Aeromechanics of Multirow Turbomachines. Journal of Engineering for Gas Turbines and Power, 138 (6). 062606. ISSN 0742-4795

Rahmati, Mohammad, He, L., Wang, D. X., Li, Y. S., Wells, R. G. and Krishnababu, S. K. (2013) Nonlinear Time and Frequency Domain Methods for Multirow Aeromechanical Analysis. Journal of Turbomachinery, 136 (4). 041010. ISSN 0889-504X

Ratnoo, Ashwini, Sujit, P. B. and Kothari, Mangal (2011) Optimal path following for high wind flights. In: 18th World Congress of the International Federation of Automatic Control (IFAC), 28 August - 2 September 2011, Milan, Italy.

Richardson, Thomas, Beaverstock, Christopher, Isikveren, Askin, Maheri, Alireza, Badcock, Ken and Da Ronch, Andrea (2011) Analysis of the Boeing 747-100 using CEASIOM. Progress in Aerospace Sciences, 47 (8). pp. 660-673. ISSN 0376-0421

Rigatos, Gerasimos, Siano, Pierluigi, Wira, Patrice, Busawon, Krishna and Binns, Richard (2020) A Nonlinear H-infinity Control Approach for Autonomous Truck and Trailer Systems. Unmanned Systems, 08 (01). pp. 49-69. ISSN 2301-3850

S

Saeed, Huzaifa, Maqsood, Adnan, Dala, Laurent and Sherbaz, Salma (2022) Numerical Investigation of Aerodynamic and Stability Behavior of Corrugated Airfoils at Low Reynolds Number. In: AIAA SCITECH 2022 Forum. American Institute of Aeronautics and Astronautics, Reston, US, 0704. ISBN 9781624106316

Samar, Raza and Postlethwaite, Ian (2010) Design and implementation of a digital multimode H∞ controller for the Spey turbofan engine. Journal of Dynamic Systems, Measurement, and Control, 132 (1). 011010. ISSN 0022-0434

Samy, Ihab, Postlethwaite, Ian and Gu, Da-Wei (2010) SFDIA of consecutive sensor faults using neural networks - demonstrated on a UAV. International Journal of Control, 83 (11). pp. 2308-2327. ISSN 0020-7179

Samy, Ihab, Postlethwaite, Ian and Gu, Da-Wei (2009) Sensor fault detection and accommodation using neural networks with application to a non-linear unmanned air vehicle model. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 224 (4). pp. 437-447. ISSN 0954-4100

Samy, Ihab, Postlethwaite, Ian and Gu, Da-Wei (2011) Unmanned air vehicle air data estimation using a matrix of pressure sensors: a comparison of neural networks and look-up tables. Journal of Aerospace Engineering, 225 (7). pp. 807-820. ISSN 0733-9429

Samy, Ihab, Whidborne, James and Postlethwaite, Ian (2011) A comparison of neural networks for FDI of rolling element bearings - demonstrated on experimental rig data. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 225 (9). pp. 1012-1026. ISSN 0954-4100

Schoombie, Janine, Tuling, Sean and Dala, Laurent (2017) Experimental and computational analysis of a tangent ogive slender body at incompressible speeds. Aerospace Science and Technology, 69. pp. 474-484. ISSN 1270-9638

Shen, Xiang, Avital, Eldad, Ikram, Zaheer, Yang, Liming, Korakianitis, Theodosios and Dala, Laurent (2023) Influence of curvature distribution smoothing on the reduction of aerofoil self-noise. International Journal of Numerical Methods for Heat & Fluid Flow, 33 (4). pp. 1379-1393. ISSN 0961-5539

Shen, Xiang, Avital, Eldad, Paul, Gordon, Rezaienia, Mohammad Amin, Wen, Pihua and Korakianitis, Theodosios (2016) Experimental study of surface curvature effects on aerodynamic performance of a low Reynolds number airfoil for use in small wind turbines. Journal of Renewable and Sustainable Energy, 8 (5). 053303. ISSN 1941-7012

Shen, Xiang, Avital, Eldad, Rezaienia, Mohammad Amin, Paul, Gordon and Korakianitis, Theodosios (2017) Computational methods for investigation of surface curvature effects on airfoil boundary layer behavior. Journal of Algorithms & Computational Technology, 11 (1). pp. 68-82. ISSN 1748-3018

Shen, Xiang, Avital, Eldad, Zhao, Qinghe, Gao, Junhui, Li, Xiaodong, Paul, Gordon and Korakianitis, Theodosios (2017) Surface curvature effects on the tonal noise performance of a low Reynolds number aerofoil. Applied Acoustics, 125. pp. 34-40. ISSN 0003-682X

Shinde, Avinash and Birkett, Martin (2017) A Numerical and Experimental Study of Carbon Fibre Riveted Splice Joints. In: Advances in Manufacturing Technology XXXI. Advances in Transdisciplinary Engineering, 6 . IOS Press, pp. 433-438. ISBN 978-1-61499-791-7

Smith, Benjamin and Maheri, Alireza (2012) Optimisation of the efficiency of carbon fibre heating elements implanted in wind turbine blades. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 410-414. ISBN 978-1467329095

T

Thai, Huu-Tai and Vo, Thuc (2012) Bending and free vibration of functionally graded beams using various higher-order shear deformation beam theories. International Journal of Mechanical Sciences, 62 (1). 57 - 66. ISSN 0020-7403

Thai, Huu-Tai and Vo, Thuc (2013) A new sinusoidal shear deformation theory for bending, buckling, and vibration of functionally graded plates. Applied Mathematical Modelling, 37 (5). 3269 - 3281. ISSN 0307-904X

Thai, Huu-Tai and Vo, Thuc (2012) A nonlocal sinusoidal shear deformation beam theory with application to bending, buckling, and vibration of nanobeams. International Journal of Engineering Science, 54. 58 - 66. ISSN 0020-7225

Thai, Huu-Tai and Vo, Thuc (2013) A size-dependent functionally graded sinusoidal plate model based on a modified couple stress theory. Composite Structures, 96. 376 - 383. ISSN 0263-8223

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Size-dependent behaviour of functionally graded sandwich microbeams based on the modified couple stress theory. Composite Structures, 123. pp. 337-349. ISSN 0263-8223

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Patel, Vipulkumar Ishvarbhai (2017) Size-dependant behaviour of functionally graded microplates based on the modified strain gradient elasticity theory and isogeometric analysis. Computers & Structures, 190. 219 - 241. ISSN 0045-7949

Theron, Jean-Pierre, Dala, Laurent, Wilke, Daniel N. and Barrier, Patrick (2018) Practical Implementation of a Trajectory Planning Algorithm for an Autonomous UAV. In: ICAS 2018 - 31st Congress of the International Council of the Aeronautical Sciences, 9th - 14th September 2018, Belo Horizonte, Brazil.

Tuling, Sean, Dala, Laurent and Toomer, Chris (2014) Two-Dimensional Potential Method Simulations of a Body–Strake Configuration. Journal of Spacecraft and Rockets, 51 (2). pp. 468-477. ISSN 0022-4650

V

Vo, Thuc (2012) Comments on the article: “A new FE model based on higher order zigzag theory for the analysis of laminated sandwich beam with soft core”, by A. Chakrabarti, H. Chalak, M.A. Iqbal, A.H. Sheikh [Composite Structures 93 (2011) 271–279]. Composite Structures, 94 (8). 2666 -2666. ISSN 0263-8223

Vo, Thuc, Guan, Zhongwei, Cantwell, Wesley and Schleyer, Graham (2012) Low-impulse blast behaviour of fibre-metal laminates. Composite Structures, 94 (3). 954 - 965. ISSN 0263-8223

Vo, Thuc, Guan, Zhongwei, Cantwell, Wesley and Schleyer, Graham (2013) Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys. Composites Part B: Engineering, 44 (1). 141 - 151. ISSN 1359-8368

Vo, Thuc and Inam, Fawad (2012) Vibration and buckling of cross-ply composite beams using refined shear deformation theory. In: 2nd International Conference on Advanced Composite Materials and Technologies for Aerospace Applications, 11-13 June, 2012, Wrexham, UK.

Vo, Thuc and Lee, Jaehong (2007) Flexural-torsional behavior of thin-walled closed-section composite box beams. Engineering Structures, 29 (8). 1774 - 1782. ISSN 0141-0296

Vo, Thuc and Lee, Jaehong (2008) Flexural–torsional behavior of thin-walled composite box beams using shear-deformable beam theory. Engineering Structures, 30 (7). 1958 - 1968. ISSN 0141-0296

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional behavior of thin-walled composite space frames. International Journal of Mechanical Sciences, 51 (11–12). 837 - 845. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2007) Flexural–torsional buckling of thin-walled composite box beams. Thin-Walled Structures, 45 (9). 790 - 798. ISSN 0263-8231

Vo, Thuc and Lee, Jaehong (2009) Flexural–torsional coupled vibration and buckling of thin-walled open section composite beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 51 (9-10). 631 - 641. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2009) Free vibration of axially loaded thin-walled composite box beams. Composite Structures, 90 (2). 233 - 241. ISSN 1879-1085

Vo, Thuc and Lee, Jaehong (2008) Free vibration of thin-walled composite box beams. Composite Structures, 84 (1). 11 - 20. ISSN 0263-8223

Vo, Thuc and Lee, Jaehong (2009) Geometrically nonlinear analysis of thin-walled composite box beams. Computers & Structures, 87 (3–4). 236 - 245. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear analysis of thin-walled open-section composite beams. Computers & Structures, 88 (5-6). 347 - 356. ISSN 0045-7949

Vo, Thuc and Lee, Jaehong (2010) Geometrically nonlinear theory of thin-walled composite box beams using shear-deformable beam theory. International Journal of Mechanical Sciences, 52 (1). 65 - 74. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2010) Interaction curves for vibration and buckling of thin-walled composite box beams under axial loads and end moments. International Journal of Mechanical Sciences, 34 (10). 3142 - 3157. ISSN 0020-7403

Vo, Thuc and Lee, Jaehong (2009) On sixfold coupled buckling of thin-walled composite beams. Composite Structures, 90 (3). 295 - 303. ISSN 0263-8223

Vo, Thuc and Lee, Jaehong (2013) Vibration and buckling of thin-walled composite I-beams with arbitrary lay-ups under axial loads and end moments. Mechanics of Advanced Materials and Structures, 20 (8). pp. 652-665. ISSN 1537-6494

Vo, Thuc, Lee, Jaehong and Ahn, Namshik (2009) On sixfold coupled vibrations of thin-walled composite box beams. Composite Structures, 89 (4). 524 - 535. ISSN 0263-8223

Vo, Thuc, Lee, Jaehong and Lee, Kihak (2010) On triply coupled vibrations of axially loaded thin-walled composite beams. Computers & Structures, 88 (3-4). 144 - 153. ISSN 0045-7949

Vo, Thuc, Lee, Jaehong, Lee, Kihak and Ahn, Namshik (2011) Vibration analysis of thin-walled composite beams with I-shaped cross-sections. Composite Structures, 93 (2). 812 - 820. ISSN 0263-8223

Vo, Thuc and Thai, Huu-Tai (2012) Free vibration of axially loaded rectangular composite beams using refined shear deformation theory. Composite Structures, 94 (11). 3379 - 3387. ISSN 0263-8223

Vo, Thuc and Thai, Huu-Tai (2012) Static behavior of composite beams using various refined shear deformation theories. Composite Structures, 94 (8). 2513 - 2522. ISSN 0263-8223

Vo, Thuc and Thai, Huu-Tai (2012) Vibration and buckling of composite beams using refined shear deformation theory. International Journal of Mechanical Sciences, 62 (1). 67 - 76. ISSN 0020-7403

Vo, Thuc, Thai, Huu-Tai and Inam, Fawad (2013) Axial-flexural coupled vibration and buckling of composite beams using sinusoidal shear deformation theory. Archive of Applied Mechanics, 83 (4). pp. 605-622. ISSN 0939-1533

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien and Inam, Fawad (2013) Static and vibration analysis of functionally graded beams using refined shear deformation theory. Meccanica. pp. 1-14. ISSN 0025-6455

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) Static behaviour of functionally graded sandwich beams using a quasi-3D theory. Composites Part B: Engineering, 68. pp. 59-74. ISSN 1359-8368

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures, 119. 1- 12. ISSN 0263-8223

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Lanc, Domagoj and Karamanli, Armagan (2017) Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory. Composite Structures, 176. pp. 388-397. ISSN 0263-8223

W

Wang, Anliang, Liu, L., Zhao, J., Lei, J., Zhang, L. and Wu, Hongwei (2014) Thermal control system design for high power electronic equipment of satellite during ground tests. In: IHTS140336, International Heat Transfer Symposium 2014, 6-9 May 2014, Beijing, China.

Wang, Anliang, Wu, Hongwei, Tang, Haibin, Liu, Yu and Liang, Xing (2013) Development and Testing of a New Thrust stand for Micro-thrust Measurement in Vacuum Conditions. Vacuum, 91. pp. 35-40. ISSN 0042-207X

Wang, Chao, Chang, Shinan and Wu, Hongwei (2015) Lagrangian Approach for Simulating Supercooled Large Droplets’ Impingement Effect. Journal of Aircraft, 52 (2). pp. 524-537. ISSN 0021-8669

Wang, Chao, Chang, Shinan, Wu, Hongwei and Xu, J. (2014) Modeling of Drop Breakup in the Bag Breakup Regime. Applied Physics Letters, 104 (15). p. 154107. ISSN 0003-6951

Wang, Chen, Chang, Shinan, Wu, Hongwei, Ding, L. and Thompson, James (2015) Theoretical Modeling of Spray Drop Deformation and Breakup in the Multimode Breakup Regime. Atomization and Sprays, 25 (10). pp. 857-869. ISSN 1045-5110

Wedemeyer, Sven, Bastian, Tim, Brajša, Roman, Barta, Miroslav, Hudson, Hugh, Fleishman, Gregory, Loukitcheva, Maria, Fleck, Bernhard, Kontar, Eduard, De Pontieu, Bart, Tiwari, Sanjiv K., Kato, Yoshiaki, Soler, Roberto, Yagoubov, Pavel, Black, J.H., Antolin, Patrick, Gunár, Stanislav, Labrosse, Nicolas, Benz, A.O., Nindos, Alexander, Steffen, M., Scullion, Eamon, Doyle, John Gerard, Zaqarashvili, Teimuraz, Hanslmeier, A., Nakariakov, V.M., Heinzel, Petr, Ayres, Tammy and Karlicky, M. (2015) SSALMON – The Solar Simulations for the Atacama Large Millimeter Observatory Network. Advances in Space Research, 56 (12). pp. 2679-2692. ISSN 0273-1177

Wei, Chongfeng and Olatunbosun, Oluremi Ayotunde (2016) The effects of tyre material and structure properties on relaxation length using finite element method. Materials & Design, 102. pp. 14-20. ISSN 0264-1275

Wiratama, I. Kade and Maheri, Alireza (2011) An investigation into the potential use of microtabs in enhancing energy capture capability of wind turbines. In: 12th International Conference on QiR (Quality in Research), 4 July - 7 July 2011, Bali, Indonesia.

X

Xu, Shenren, Zhao, Jiazi, Wu, Hangkong, Zhang, Sen, Huang, Huang, Mülle, Jens-Dominik, Rahmati, Mohammad and Wang, Dingxi (2023) A Review of Solution Stabilization Techniques for RANS CFD Solvers. Aerospace, 10 (3). p. 230. ISSN 2226-4310

Y

Yesiltepe, Demet (2021) The relationship between wayfinding performance, spatial layout and landmarks in virtual environments. Doctoral thesis, Northumbria University.

Young, Peter R. (2021) Future Prospects for Solar EUV and Soft X-Ray Spectroscopy Missions. Frontiers in Astronomy and Space Sciences, 8. p. 662790. ISSN 2296-987X

Z

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) Effect of laminate configuration and shell-thickness variation on the inducted twist distribution in wind turbine adaptive blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for deformation analysis of wind turbine adaptive blades. In: High Performance Structure and Materials VI. WIT transactions on the built environment, 124 . WIT Press, Southampton, UK, pp. 13-26. ISBN 978-1845645960

Zhang, Hui, Maheri, Alireza, Daadbin, Ali and Hackney, Philip (2012) An analytical model for frequency analysis of composite wind turbine blades. In: 2012 2nd International Symposium On Environment Friendly Energies and Applications. IEEE, Piscataway, NJ, pp. 415-420. ISBN 978-1467329095

Zhou, Yi, Yeoh, Phee Lep, Pan, Cunhua, Wang, Kezhi, Ma, Zheng, Vucetic, Branka and Li, Yonghui (2022) Caching and UAV Friendly Jamming for Secure Communications With Active Eavesdropping Attacks. IEEE Transactions on Vehicular Technology, 71 (10). pp. 11251-11256. ISSN 0018-9545

Zhu, Hai-min, Chen, Wei-fang, Zhu, Ru-peng, Zhang, Li, Gao, Jie and Liao, Mei-jun (2020) Dynamic analysis of a flexible rotor supported by ball bearings with damping rings based on FEM and lumped mass theory. Journal of Central South University, 274 (12). pp. 3684-3701. ISSN 2095-2899

This list was generated on Tue Oct 15 12:49:29 2024 UTC.