Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2015

Up a level
Export as [feed] RSS
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 219.

A

Abid, Khizar, Gholami, Raoof, Choate, Paul and Nagaratnam, Brabha (2015) A review on cement degradation under CO2-rich environment of sequestration projects. Journal of Natural Gas Science and Engineering, 27 (2). pp. 1149-1157. ISSN 1875-5100

Agnew, Brian, Walker, Sara, Ng, Bobo and Tam, Ivan (2015) Finite Time Analysis of a Tri-Generation Cycle. Energies, 8 (6). pp. 6215-6229. ISSN 1996-1073

Agnew, Brian, Walker, Sara, Ng, Bobo and Tam, Ivan (2015) Maximum output from a tri-generation cycle. Applied Thermal Engineering, 90. pp. 1015-1020. ISSN 1359-4311

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2015) A novel method of comparing laser trim pattern geometries of thin film resistors. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). Bath University, UK, pp. 13-18. ISBN 1857901878

Alanjari, Pejman, RazaviAlavi, SeyedReza and AbouRizk, Simaan (2015) Hybrid Genetic Algorithm-Simulation Optimization Method for Proactively Planning Layout of Material Yard Laydown. Journal of Construction Engineering and Management, 141 (10). 06015001. ISSN 0733-9364

Albadran, Abdullah (2015) An Investigation of ISO 9000 Implementation Issues In Saudi Arabia Manufacturing Industry. Doctoral thesis, Northumbria University.

Algabasi, Abdullatif and Maheri, Alireza (2015) A genetic algorithm for solving classical job shop scheduling problems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Ali, Abdalla, Hackney, Philip, Bell, David and Birkett, Martin (2015) Genetic algorithms for solving bicriteria dynamic job shop scheduling problems with alternative routes. In: ICEMIS '15 Proceedings of The International Conference on Engineering & MIS 2015. Association for Computing Machinery, New York. ISBN 978-1-4503-3418-1

Ali, Abdalla, Hackney, Philip, Birkett, Martin and Bell, David (2015) Genetic algorithms for minimizing the number of tardy jobs in job shop scheduling with machine setup issue. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). University of Bath, UK, pp. 63-69. ISBN 1857901878

Aljanabi, Darkam, Birkett, Martin and Walker, Sara (2015) A mixed methods approach to investigate the need for total productive maintenance (TPM) in Iraqi power plants. In: MMIRA Asia Regional Conference, 19 - 20 September 2015, Osaka.

Alnasseri, Nasser (2015) Managing and controlling airport construction projects: a strategic management framework for operators. Doctoral thesis, Northumbria University.

Alwan, Zaid and Gledson, Barry (2015) Towards green building performance evaluation using Asset Information Modelling. Built Environment Project and Asset Management, 5 (3). pp. 290-303. ISSN 2044-124X

Aravinda, L. S., Bhat, K. Udaya, Wei, Jiacheng, Inam, Fawad and Bhat, Badekai Ramachandra (2015) Flexible Binder free electrode for ultracapacitor. In: 5th Chemical Nanoscience Symposium (CNSN-5), 26 March 2015, Newcastle upon Tyne.

Aso, Raymond and Cheung, Wai Ming (2015) Towards greener horizontal-axis wind turbines: Analysis of carbon emissions, energy and costs at the early design stage. Journal of Cleaner Production, 87. pp. 263-274. ISSN 0959-6526

B

Babatunde, Solomon, Perera, Srinath, Zhou, Lei and Udeaja, Chika (2015) Barriers to public private partnership projects in developing countries a case of Nigeria. Engineering, Construction and Architectural Management, 22 (6). pp. 669-691. ISSN 0969 9988

Bade, Lokesh, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Investigation into the Development of an Additive Manufacturing Technique for the Production of Fibre Composite Products. Procedia Engineering, 132. pp. 86-93. ISSN 1877-7058

Barbot, Jean Pierre, Boutat, Driss and Busawon, Krishna (2015) Utility of high-order sliding mode differentiators for dynamical left inversion problems. IET Control Theory & Applications, 9 (4). pp. 538-544. ISSN 1751-8644

Barreno, Igor, Costa Pereira, Carolina, Cordon, Marta, Tutar, Mustafa, Urrutibeascoa, Idoia, Gomez, Xabo and Castillo, German (2015) Numerical correlation for the pressure drop in Stirling engine heat exchangers. International Journal of Thermal Sciences, 97. pp. 68-81. ISSN 1290-0729

Bell, David (2015) International student academic success: looking at the importance of underpinning knowledge from an educational supply chain perspective. Doctoral thesis, Northumbria University.

Bhinder, Majid A., Rahmati, Mohammad, Mingham, C.G. and Aggidis, G. A. (2015) Numerical hydrodynamic modelling of a pitching wave energy converter. European Journal of Computational Mechanics, 24 (4). pp. 129-143. ISSN 1779-7179

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Behavior of masonry columns repaired using small diameter cords. Key Engineering Materials, 624. pp. 254-265. ISSN 1662-9795

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Determination of Shear Strength of Masonry Panels Through Different Tests. International Journal of Architectural Heritage, 9 (8). pp. 913-927. ISSN 1558-3058

Borri, Antonio, Castori, Giulio and Corradi, Marco (2015) Strengthening of thin masonry arches. Key Engineering Materials, 624. pp. 51-58. ISSN 1662-9795

Borri, Antonio, Castori, Giulio, Corradi, Marco and Sisti, Romina (2015) Ageing problems of GFRP grids used for masonry reinforcement. Key Engineering Materials, 624. pp. 413-420. ISSN 1662-9795

Borri, Antonio, Castori, Giulio, Corradi, Marco and Speranzini, Emanuela (2015) Durability analysis for FRP and SRG composites in civil applications. Key Engineering Materials, 624. pp. 421-428. ISSN 1662-9795

Borri, Antonio, Corradi, Marco and Castori, Giulio (2015) Reinforcement of softwood beams using unglued composite laminates. In: 3rd International Conference on Structural Health Assessment of Timber Structures, 9-11 September 2015, Wroclaw.

Borri, Antonio, Corradi, Marco, Castori, Giulio and De Maria, Alessandro (2015) A method for the analysis and classification of historic masonry. Bulletin of Earthquake Engineering, 13 (9). pp. 2647-2665. ISSN 1570-761X

Borri, Antonio, Corradi, Marco, Castori, Giulio, Sisti, Romina and Osofero, Israel (2015) Reinforcement of historic wall panels with thermoinsulating fiber-reinforced plaster. In: 12th North American Masonry Conference, 17 - 20 May 2015, Denver, Colorado.

Borri, Antonio, Corradi, Marco, Sisti, Romina, Buratti, Cinzia, Belloni, Elisa and Moretti, Elisa (2015) Masonry wall panels retrofitted with thermal-insulating GFRP-reinforced jacketing. Materials and Structures, 49 (10). pp. 3957-3968. ISSN 1359-5997

Bortot, Eliana and Gei, Massimiliano (2015) Harvesting energy with load-driven dielectric elastomer annular membranes deforming out-of-plane. Extreme Mechanics Letters, 5. pp. 62-73. ISSN 2352-4316

Bortot, Eliana, Gei, Massimiliano and deBotton, Gal (2015) Optimal energy harvesting cycles for load-driven dielectric elastomer generators under equibiaxial deformation. Meccanica, 50 (11). pp. 2751-2766. ISSN 0025-6455

Bortot, Eliana, Springhetti, Roberta, deBotton, Gal and Gei, Massimiliano (2015) Optimization of Load-driven Soft Dielectric Elastomer Generators. Procedia IUTAM, 12. pp. 42-51. ISSN 2210-9838

Bouazza, Touria, Udeaja, Chika and Greenwood, David (2015) The Use of Building Information Modelling (BIM) in managing knowledge in construction project delivery: a conceptual model. In: ICES BIM 2015 Conference, 9-11 September 2015, Bristol.

Bowes, Aidan and Hasan, Reaz (2015) A computational analysis of flow and acoustics around a car wing mirror. In: World Congress on Engineering 2015, 1-3 July 2015, Imperial College, London.

Bruchhausen, Matthias, Fischer, Burkhard, Ruiz, A., Gonzalez Sanchez, Sergio, Hähner, Peter and Soller, Sebastian (2015) Impact of hydrogen on the high cycle fatigue behaviour of Inconel 718 in asymmetric push–pull mode at room temperature. International Journal of Fatigue, 70. pp. 137-145. ISSN 0142-1123

Butt, Talib E., Camilleri, M., Paul, P. and Jones, K.G. (2015) Obsolescence types and the built environment - definitions and implications. International Journal of Environment and Sustainable Development, 14 (1). p. 20. ISSN 1474-6778

Butt, Talib E., Francis, Trevor, Greenwood, David, Jones, Keith and Nasir, Azhar (2015) The role of BIM in tackling obsolescence, climate change, and sustainability. WIT Transactions on the Built Environment, 149. ISSN 1746-4498

C

Castori, Giulio, Borri, Antonio, Sisti, Romina, De Maria, Alessandro and Corradi, Marco (2015) Seismic vulnerability of the Piero della Francesca’s fresco called “Resurrection". In: COMPDYN 2015: 5th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, 25 - 27 May 2015, Crete Island.

Chen, Xue and Meguid, S. A. (2015) Snap-through buckling of initially curved microbeam subject to an electrostatic force. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2177). p. 20150072. ISSN 1364-5021

Chen, Xue and Meguid, S.A. (2015) On the parameters which govern the symmetric snap-through buckling behavior of an initially curved microbeam. International Journal of Solids and Structures, 66. pp. 77-87. ISSN 0020-7683

Cherian Lukose, Cecil, Zoppi, Guillaume and Birkett, Martin (2015) Thin film resistive materials: past, present and future. IOP Conference Series: Materials Science and Engineering, 104. 012003. ISSN 1757-899X

Cheung, Wai Ming and Aso, Raymond (2015) A Quantitative Analysis System for Greener Wind Turbine Concept Selection. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Cheung, Wai Ming, Marsh, Robert, Griffin, Paul W., Newnes, Linda, Mileham, Antony and Lanham, John (2015) Towards Cleaner Production: a Roadmap for Predicting Product End-Of-Life Costs at Early Design Concept. Journal of Cleaner Production, 87 (15). pp. 431-441. ISSN 0959-6526

Cheung, Wai Ming, Marsh, Robert, Newnes, Linda, Mileham, Antony and Lanham, John (2015) Cost Data Modelling and Searching to Support Low Volume, High Complexity, Long Life Defence Systems Development. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (5). pp. 835-846. ISSN 0954-4054

Cheung, Wai Ming and Pachisia, Vedant (2015) Facilitating waste paper recycling and repurposing via cost modelling of machine failure, labour availability and waste quantity. Resources, Conservation and Recycling, 101. pp. 34-41. ISSN 0921-3449

Corradi, Marco, Borri, Antonio, Castori, Giulio and Coventry, Kathryn (2015) Experimental analysis of dynamic effects of FRP reinforced masonry vaults. Materials, 8 (12). pp. 8059-8071. ISSN 1996-1944

Corradi, Marco, Osofero, Israel, Borri, Antonio and Castori, Giulio (2015) Strengthening of Historic Masonry Structures with Composite Materials. In: Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures. IGI Global, Hershey, PA, pp. 257-292. ISBN 9781466682863

Corradi, Marco, Righetti, Luca and Borri, Antonio (2015) Bond Strength of composite CFRP reinforcing bars in timber. Materials, 8 (7). pp. 4034-4049. ISSN 1996-1944

Corradi, Marco, Righetti, Luca and Osofero, Israel (2015) Unbonded composite-fibre reinforcement for timber beams. In: 16th International European Bridge Conference, 23 - 25 June 2015, Edinburgh.

Corradi, Marco, Righetti, Luca, Osofero, Israel, Borri, Antonio, Castori, Giulio and Sisti, Romina (2015) Accelerated aging and fatigue effects on GFRP grids. In: Ingegneria Forense, Crolli, Affidabilita strutturale e Consolidamento. Associazione Italiana di Ingegneria Forense, pp. 455-466. ISBN 978-88-579-0447-4

Costa Pereira, Carolina, Barreno, Igor, Tutar, Mustafa, Esnaola, Jon-Ander and Barrutia, Harritz (2015) The thermal non-equilibrium porous media modelling for CFD study of woven wire matrix of a Stirling regenerator. Energy Conversion and Management, 89. pp. 473-483. ISSN 0196-8904

Coventry, Kathryn, Richardson, Alan and Diaz, Eli (2015) Impact resistance of concrete – using slit rubber from tyres. In: Euro-Elecs-2015: Latin American and European Conference on Sustainable Buildings and Communities, 21-23 July 2015, Guimaraes.

Cresswell, N., Ingram, Grant and Dominy, Robert (2015) The impact of diffuser augmentation on a tidal stream turbine. Ocean Engineering, 108. pp. 155-163. ISSN 0029-8018

D

Daoush, Walid, Park, Hee Sup, Inam, Fawad, Lim, Byung Kyu and Hong, Soon Hyung (2015) Microstructural and Mechanical Characterization of Ti-12Mo-6Zr Biomaterials Fabricated by Spark Plasma Sintering. Metallurgical and Materials Transactions A, 46 (3). pp. 1385-1393. ISSN 1073-5623

Dizqah, Arash, Maheri, Alireza, Busawon, Krishna and Fritzson, Peter (2015) Standalone DC microgrids as complementarity dynamical systems: Modeling and applications. Control Engineering Practice, 35. pp. 102-112. ISSN 0967-0661

Dudziak, Tomasz, Du, H. L., Datta, Psantu and Hovsepian, Papken (2015) Air oxidation behaviour of standard PVD and novel HIPIMS coatings at 750°C for 1000 h. Corrosion Engineering, Science and Technology, 50 (2). pp. 118-127. ISSN 1478-422X

E

Ekambaram, Karthikeyan, Frampton, Richard and Bartlett, Lisa (2015) Improving the Chest Protection of Elderly Occupants in Frontal Crashes Using SMART Load Limiters. Traffic Injury Prevention, 16 (sup2). S77-S86. ISSN 1538-9588

Elgadi, Osama, Birkett, Martin and Cheung, Wai Ming (2015) A proposed research methodology for six sigma deployment in Libyan manufacturing companies. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). University of Bath, UK, pp. 81-86. ISBN 1857901878

Elkady, Mostafa, Elmarakbi, Ahmed and MacIntyre, John (2015) Integration of vehicle dynamics control systems with an extendable bumper for collision mitigation. International Journal of Automotive and Mechanical Engineering, 12. pp. 2893-2913. ISSN 2229-8649

Elmarakbi, Ahmed, Azoti, Wiyao, Martorana, Brunetto, Belingardi, Giovanni and Ciardiello, Raffaele (2015) Graphene-based composite materials for automotives. In: ICCM 2015 - 20th International Conference on Composite Materials, 19th - 24th July 2015, Copenhagen, Denmark.

Ene, Gloria Unoma, Goulding, Jack, John, Godfaurd Adjaie and Rahimian, Farzad Pour (2015) Holistic learning: a workforce development paradigm. In: Construct15 - 23rd Global Lean Construction Conference, 28th - 31st July 2015, Perth, Australia.

Etaig, Saleh, Hasan, Reaz and Perera, Noel (2015) Numerical study on the effect of inclination angle on heat transfer performance in back-ward facing step utilizing nanofluid. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

Ezcan, Volkan, Goulding, Jack, Rahimian, Farzad Pour and Kuruoglu, Murat (2015) Avoiding stiffness: perspectives of agile technology diffusion. In: International Conference on Innovative Production and Construction, 28th - 31st July 2015, Perth, Western Australia.

F

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2015) An approach to achieve operational effectiveness and sustainability requirements in manufacturing. In: International Conference on Manufacturing Research (ICMR2015), 8 - 10 September, 2015, Bath.

Farokhi, Hamed and Ghayesh, Mergen H. (2015) Nonlinear dynamical behaviour of geometrically imperfect microplates based on modified couple stress theory. International Journal of Mechanical Sciences, 90. pp. 133-144. ISSN 0020-7403

Farokhi, Hamed and Ghayesh, Mergen H. (2015) Nonlinear motion characteristics of microarches under axial loads based on modified couple stress theory. Archives of Civil and Mechanical Engineering, 15 (2). pp. 401-411. ISSN 1644-9665

Farokhi, Hamed and Ghayesh, Mergen H. (2015) Thermo-mechanical dynamics of perfect and imperfect Timoshenko microbeams. International Journal of Engineering Science, 91. pp. 12-33. ISSN 0020-7225

Fong, Joshua, Edge, Jerry, Underwood, Chris, Tindale, Andy and Potter, Steve (2015) Performance of a dynamic distributed element heat emitter model embedded into a third order lumped parameter building model. Applied Thermal Engineering, 80. pp. 279-287. ISSN 1359-4311

G

Georgitsioti, Tatiani, Pillai, Gobind, Forbes, Ian, Pearsall, Nicola, Anand, Raghubir and Putrus, Ghanim (2015) Short-term performance variations of different photovoltaic system technologies under the humid subtropical climate of Kanpur in India. IET Renewable Power Generation, 9 (5). pp. 438-445. ISSN 1752-1416

Ghayesh, Mergen H., Amabili, Marco and Farokhi, Hamed (2015) Global dynamics of an axially moving buckled beam. Journal of Vibration and Control, 21 (1). pp. 195-208. ISSN 1077-5463

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Chaotic motion of a parametrically excited microbeam. International Journal of Engineering Science, 96. pp. 34-45. ISSN 0020-7225

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Coupled Nonlinear Dynamics of Geometrically Imperfect Shear Deformable Extensible Microbeams. Journal of Computational and Nonlinear Dynamics, 11 (4). 041001. ISSN 1555-1415

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Coupled longitudinal-transverse-rotational behaviour of shear deformable microbeams. Composites Part B: Engineering, 77. pp. 319-328. ISSN 1359-8368

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Internal energy transfer in dynamical behaviour of Timoshenko microarches. Mathematics and Computers in Simulation, 112. pp. 28-39. ISSN 0378-4754

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Nonlinear dynamics of microplates. International Journal of Engineering Science, 86. pp. 60-73. ISSN 0020-7225

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Post-buckling dynamics of Timoshenko microbeams under axial loads. International Journal of Dynamics and Control, 3 (4). pp. 403-415. ISSN 2195-268X

Ghayesh, Mergen H. and Farokhi, Hamed (2015) Thermo-mechanical dynamics of three-dimensional axially moving beams. Nonlinear Dynamics, 80 (3). pp. 1643-1660. ISSN 0924-090X

Ghayesh, Mergen H., Farokhi, Hamed and Alici, Gursel (2015) Size-dependent electro-elasto-mechanics of MEMS with initially curved deformable electrodes. International Journal of Mechanical Sciences, 103. pp. 247-264. ISSN 0020-7403

Ghayesh, Mergen H., Farokhi, Hamed and Alici, Gursel (2015) Subcritical parametric dynamics of microbeams. International Journal of Engineering Science, 95. pp. 36-48. ISSN 0020-7225

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2015) A realistic FDTD numerical modeling framework of ground penetrating radar for landmine detection. IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 9 (1). pp. 37-51. ISSN 1939-1404

Giannakis, Iraklis, Giannopoulos, Antonios, Warren, Craig and Davidson, Nigel (2015) Numerical modelling and neural networks for landmine detection using ground penetrating radar. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Gilmour, M. S. and Wu, Hongwei (2015) House Design with Energy Saving System: A Review. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Gkounis, George (2015) Experimental and theoretical analysis of the performance of micro co-generation systems based on various technologies. Doctoral thesis, Northumbria University.

Gledson, Barry (2015) Investigating the diffusion of 4D BIM Innovation. In: Proceedings 31st Annual ARCOM Conference, 7th - 9th September 2015, Lincoln.

Gonzalez Sanchez, Sergio (2015) Drastic influence of minor Fe or Co additions on the glass forming ability, martensitic transformations and mechanical properties of shape memory Zr–Cu–Al bulk metallic glass composites. In: Northumbria Research Conference 2015, 20th May 2015, Northumbria University.

Greenwood, David (2015) Keeping it real: Is our research relevant? And should it be? In: 12th International Postgraduate Research Conference (IPGRC 2015), 10-12 June, 2015, Salford.

Grekhov, Leonid, Mahkamov, Khamid and Kuleshov, Andrei (2015) Optimization of Mixture Formation and Combustion in Two-Stroke OP Engine Using Innovative Diesel Spray Combustion Model and Fuel System Simulation Software. In: FFL 2015 - JSAE/SAE 2015 International Powertrains, Fuels and Lubricants Meeting, 1st - 4th September 2015, Kyoto, Japan.

Guadagno, L., Raimondo, M., Vertuccio, L., Mauro, M., Guerra, G., Lafdi, Khalid, De Vivo, B., Lamberti, P., Spinelli, G. and Tucci, V. (2015) Optimization of graphene-based materials outperforming host epoxy matrices. RSC Advances, 5 (46). pp. 36969-36978. ISSN 2046-2069

Guo, Yuanjun, Dennison, Andrew, Li, Yifan, Luo, Jikui, Zu, Xiao-Tao, Mackay, Logan, Langridge-Smith, Pat, Walton, Anthony and Fu, Yong Qing (2015) Nebulization of water/glycerol droplets generated by ZnO/Si surface acoustic wave devices. Microfluidics and Nanofluidics, 19 (2). pp. 273-282. ISSN 1613-4982

Guo, Yuanjun, Zhao, Chao, Zhou, X. S., Li, Yifan, Zu, Xiao-Tao, Gibson, Desmond and Fu, Yong Qing (2015) Ultraviolet sensing based on nanostructured ZnO/Si surface acoustic wave devices. Smart Materials and Structures, 24 (12). p. 125015. ISSN 0964-1726

Guzmán, Eduardo, Santini, Eva, Zabiegaj, Dominika, Ferrari, Michele, Liggieri, Libero and Ravera, Francesca (2015) Interaction of Carbon Black Particles and Dipalmitoylphosphatidylcholine at the Water/Air Interface: Thermodynamics and Rheology. The Journal of Physical Chemistry C, 119 (48). pp. 26937-26947. ISSN 1932-7447

H

Hasan, Reaz, Tudor, Jenna and Ramadan, Ahmed (2015) Modelling of Flow and Heat Transfer in Spent Fuel Cooling Ponds. In: International Congress on Advances in Nuclear Power Plants, 3-5 May 2015, Nice, France.

UMASS AMHERST (2015) Mechanically gated electrical switches by creasing of patterned metal/elastomer bilayer films. US20150294805.

Hernandez-Somoza, Maria, Alafogianni, Maria, Stylianidis, Nearchos, Unsal, Ibrahim and Maheri, Alireza (2015) Incorporating end-user requirements in design of hybrid renewable energy systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Hernandez-Somoza, Maria, Christou, Neofytos, Morganti, Manlio and Maheri, Alireza (2015) Design of nanofluid solar collectors. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Hossain, Mokarram and Steinmann, Paul (2015) Continuum Physics of Materials with Time-Dependent Properties. In: Advances in Applied Mechanics. Advances in Applied Mechanics, 48 (48). Elsevier, London, pp. 141-259. ISBN 9780128021286

I

Iyi, Draco and Hasan, Reaz (2015) Natural convection flow and heat transfer in an enclosure containing staggered arrangement of blockages. Procedia Engineering, 105. pp. 176-183. ISSN 1877-7058

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2015) Effect of Emissivity on the Heat and Mass Transfer of Humid Air in a Cavity Filled with Solid Obstacles. Numerical Heat Transfer, Part A: Applications, 67 (5). pp. 531-546. ISSN 1040-7782

J

Jangi, Mehdi, Solsjo, Rickard, Johansson, Bengt and Bai, Xue-Song (2015) On large eddy simulation of diesel spray for internal combustion engines. International Journal of Heat and Fluid Flow, 53. pp. 68-80. ISSN 0142-727X

Jedidi, Abdesslem, Rasul, Shahid, Masih, Dilshad, Cavallo, Luigi and Takanabe, Kazuhiro (2015) Generation of Cu–In alloy surfaces from CuInO2 as selective catalytic sites for CO2 electroreduction. Journal of Materials Chemistry A, 3 (37). pp. 19085-19092. ISSN 2050-7488

Jiang, Yinzhu, Li, Yong, Sun, Wenping, Huang, Wei, Liu, Jiabin, Jin, Chuanghong, Xu, Ben, Ma, Tianyu, Wu, Changzheng and Yan, Mi (2015) Spatially-confined lithiation/delithiation in highly dense nanocomposite anodes towards advanced lithium-ion batteries. Energy & Environmental Science, 8 (5). pp. 1471-1479. ISSN 1754-5692

Jiang, Z., Wang, Kai, Wu, Hongwei, Wang, Yue and Du, Juan (2015) A two-dimensional analytical model for prediction of the radiation heat transfer in open-cell metal foams. Applied Thermal Engineering, 93. pp. 1273-1281. ISSN 1359-4311

K

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Machining Unidirectional Composites using Single-Point Tools: Analysis of Cutting Forces, Chip Formation and Surface Integrity. Procedia Engineering, 132. pp. 569-576. ISSN 1877-7058

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Kamjoo, Azadeh (2015) A Decision Support System for Integrated Design of Hybrid Renewable Energy System. Doctoral thesis, Northumbria University.

Kassem, Mohamad, Dawood, Nashwan and Chavada, Rajiv (2015) Construction workspace management within an Industry Foundation Class-Compliant 4D tool. Automation in Construction, 52. pp. 42-58. ISSN 0926-5805

Katsamangas, Kostandinos, Bhat, Badekai Ramachandra and Inam, Fawad (2015) Scanning Electronic Microscopy for analysis of the effects of surfactants on de-wrinkling and dispersion of graphene. International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering, 9 (6). pp. 728-732.

Keerthan, Poologanathan and Mahendran, Mahen (2015) Improved shear design rules of cold-formed steel beams. Engineering Structures, 99. pp. 603-615. ISSN 0141-0296

Khaled, Mahmoud, Ramadan, Mohamad, Elmarakbi, Ahmed and Fourment, Lionel (2015) Simulation of Incremental Forming Processes Using a Thermo-Mechanical Partitioned Algorithm. In: Key Engineering Materials. Trans Tech Publications Inc, pp. 1331-1336. ISBN 9783038354710

Khaliq, Jibran, Li, Chunchun, Chen, Kan, Shi, Baogui, Ye, Haitao, Grande, Antonio, Yan, Haixue and Reece, Michael (2015) Reduced thermal conductivity by nanoscale intergrowths in perovskite like layered structure La2Ti2O7. Journal of Applied Physics, 117 (7). 075101. ISSN 0021-8979

Kode, T. E., Wu, Hongwei and Ogwu, A. A. (2015) Critical Review of the Thermo-hydraulic Properties of Fluids in Micro Channels. In: The 8th International Conference on Sustainable Energy & Environmental Protection, Proceedings of SEEP 2015, August 11-14, 2015, Paisley, UK.

Kolo, Shaba James, Rahimian, Farzad Pour and Goulding, Jack (2015) Housing stakeholders' perspective on offsite manufacturing in Nigeria. In: Construct15 - 23rd Global Lean Construction Conference, 28th - 31st July 2015, Perth, Australia.

Kuleshov, Andrei, Mahkamov, Khamid, Janhunen, Timo, Akimov, Victor and Kuleshov, Alexey (2015) New Downsized Diesel Engine Concept with HCCI Combustion at High Load Conditions. In: FFL 2015 - JSAE/SAE 2015 International Powertrains, Fuels and Lubricants Meeting, 1st - 4th September 2015, Kyoto, Japan.

L

Lee, Mildred, Yeo, Eudora, Blacklock, Matthew, Janardhana, Madabhushi, Feih, Stefanie and Wang, Chun H. (2015) Predicting the strength of adhesively bonded joints of variable thickness using a cohesive element approach. International Journal of Adhesion & Adhesives, 58. pp. 44-52. ISSN 0143-7496

Leone, Marianovella, Aiello, Maria Antonietta, Balsamo, Alberto, Carozzi, Francesca Giulia, Ceroni, Francesca, Corradi, Marco, Gams, Matija, Garbin, Enrico, Gattesco, Natalino, Krajewski, Piotr, Mazzotti, Claudio, Oliveira, Daniel, Papanicolaou, Catherine, Ranocchiai, Giovanna, Roscini, Francesca and Saenger, Dorothea (2015) Glass fabric reinforced cementitious matrix: Tensile properties and bond performance on masonry substrate. Composites Part B: Engineering, 127. pp. 196-214. ISSN 1359-8368

Li, Chunchun, Khaliq, Jibran, Ning, Huanpo, Wei, Xiaoyong, Yan, Haixue and Reece, Michael (2015) Study on properties of tantalum-doped La2Ti2O7 ferroelectric ceramics. Journal of Advanced Dielectrics, 05 (01). p. 1550005. ISSN 2010-135X

Li, Yifan, McHale, Glen, Smith, S., Walton, Anthony and Xu, Ben (2015) Large Surface Strain Sensing Structures based on Elastic Instabilities. In: International Conference on Microelectronic Test Structures (ICMTS), March 23 - 26, 2015, Tempe, Arizona, US.

Li, Yifan, Terry, Jonathan, Smith, S., Walton, Anthony, McHale, Glen and Xu, Ben (2015) Elastic instabilities induced large surface strain sensing structures (EILS). In: Proceedings of the 2015 International Conference on Microelectronic Test Structures. IEEE, Piscataway, NJ, pp. 94-99. ISBN 978-4799-8304-9

Lilley, Sara, Davidson, Gill, Gledson, Barry and Alwan, Zaid (2015) Analysing the technical and behavioural shifts of social housing tenants following the retrofitting of external wall insulation. In: International SEEDS Conference 2015, 17th - 18th September 2015, Leeds, UK.

Lin, Zi and Sayer, P. (2015) Influence of water depth variation on the hydrodynamics of deep-water mooring characteristics. Ocean Engineering, 109. pp. 553-566. ISSN 0029-8018

Lin, Zi and Sayer, Philip (2015) An enhanced stiffness model for elastic lines and its application to the analysis of a moored floating offshore wind turbine. Ocean Engineering, 109. pp. 444-453. ISSN 0029-8018

Liu, Dongdong, Tao, Zhi, Luo, Xiang, Wu, Hongwei and Yu, Xiao (2015) Development of a new factor for hot gas ingestion through rim seal. Journal of Engineering for Gas Turbines and Power, 138 (7). ISSN 0742-4795

Liu, Xiangyun, Liu, L., Wang, Wu, He, Bin and Wu, Hongwei (2015) Numerical Simulation of Gas-liquid Two-phase Flow in Non-circular Micro-channels. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Wu, Hongwei and Mirzaeian, Mojtaba (2015) Numerical Simulation of Vapor-liquid Two Phase Flow with Dirt Blocking Effect inside Channels. In: The 3rd SusTEM International Conference, 7-8 July 2015, Newcastle upon Tyne, UK.

Liu, Xiaoteng, Yu, Eileen and Scott, Keith (2015) Preparation and evaluation of a highly stable palladium yttrium platinum core–shell–shell structure catalyst for oxygen reduction reactions. Applied Catalysis B: Environmental, 162. pp. 593-601. ISSN 0926-3373

Liu, Yong, Li, Yifan, el-Hady, Ahmed. M., Zhao, Chao, Du, Juan, Liu, Yang and Fu, Yong Qing (2015) Flexible and bendable acoustofluidics based on ZnO film coated aluminium foil. Sensors and Actuators B: Chemical, 221. pp. 230-235. ISSN 0925-4005

Lu, Haibao, Lei, Ming, Zhao, Chao, Xu, Ben, Leng, Jinsong and Fu, Yong Qing (2015) Structural design of flexible Au electrode to enable shape memory polymer for electrical actuation. Smart Materials and Structures, 24 (4). 045015. ISSN 0964-1726

Lu, Haibo, Xin, Wang, Yao, Yongtao, Guo, Jihua, Xu, Ben and Fu, Yong Qing (2015) Synergistic effect of siloxane modified aluminum nanopowders and carbon fiber on electrothermal efficiency of polymeric shape memory nanocomposite. Composites Part B Engineering, 80. pp. 1-6. ISSN 1359-8368

M

Macquart, Terence and Maheri, Alireza (2015) Integrated aeroelastic and control analysis of wind turbine blades equipped with microtabs. Renewable Energy, 75. pp. 102-114. ISSN 0960-1481

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Exploring knowledge management principles for decision- making in low-energy building for sustainability in construction. In: CIB International Conference: Going North for Sustainability: Leveraging Knowledge and Innovation for Sustainable Construction and Development, 23 - 25 November 2015, London.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Investigation of Knowledge Management Principles in Delivering Sustainable Retrofitted Building Projects. In: 12th International Postgraduate Research Conference (IPGRC 2015), 10-12 June 2015, Salford.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) Managing project knowledge in delivering sustainable retrofitted buildings: A decision support framework. In: 12th International Postgraduate Research Conference (IPGRC 2015), 10-12 June, 2015, Salford.

Maduka, Nnamdi, Udeaja, Chika and Greenwood, David (2015) The use of knowledge management approach in delivering sustainable retrofitted building projects: A conceptual decision support system for key stakeholders. In: 2nd International Sustainable Buildings Symposium (ISBS 2015), 28-30 May 2015, Istanbul.

Mahkamov, Khamid, Orda, Eugene, Belgasim, Basim and Makhkamova, Irina (2015) A novel small dynamic solar thermal desalination plant with a fluid piston converter. Applied Energy, 156. pp. 715-726. ISSN 0306-2619

McGibbney, Lewis and Kumar, Bimal (2015) A Framework for Regulatory Ontology Construction within AEC Domain. In: Ontology in the AEC Industry. American Society of Civil Engineers, pp. 193-215. ISBN 9780784413906

Meijer, Marius-Corné and Dala, Laurent (2015) Zeroth-order flutter prediction for cantilevered plates in supersonic flow. Journal of Fluids and Structures, 57. pp. 196-205. ISSN 0889-9746

Meng, Han, Ao, Q.B., Ren, S.W., Xin, F.X., Tang, H.P. and Lu, T.J. (2015) Anisotropic acoustical properties of sintered fibrous metals. Composites Science and Technology, 107. pp. 10-17. ISSN 0266-3538

Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2015) Practical implementation of a concurrent trimming approach for manganin shunt resistors. International Journal of Computing, Communications & Instrumentation Engineering, 2 (2). pp. 81-85. ISSN 2349-1469

Mollón, Victoria, Bonhomme, Jorge, Elmarakbi, Ahmed, Viña, Jaime and Argüelles, Antonio (2015) Comparison of numerical, empirical and local partition methods in ADCB specimens. International Journal of Automotive Composites, 1 (4). pp. 299-312. ISSN 2051-8218

N

Nagaratnam, Brabha, Faheem, Ahmed, Rahman, Muhammad, Mannan, Mohammad and Leblouba, Moussa (2015) Mechanical and Durability Properties of Medium Strength Self-Compacting Concrete with High-Volume Fly Ash and Blended Aggregates. Periodica Polytechnica Civil Engineering, 59 (2). pp. 155-164. ISSN 0553-6626

Newbon, Joshua, Dominy, Robert and Sims-Williams, David (2015) CFD Investigation of the Effect of the Salient Flow Features in the Wake of a Generic Open-Wheel Race Car. SAE International Journal of Passenger Cars - Mechanical Systems, 8 (1). pp. 217-232. ISSN 1946-4002

Nguyen, Kien, Thai, Huu-Tai and Vo, Thuc (2015) A refined higher-order shear deformation theory for bending, vibration and buckling analysis of functionally graded sandwich plates. Steel and Composite Structures, 18 (1). pp. 91-120. ISSN 1229-9367

Nguyen, Trung-Kien, Nguyen, T. Truong-Phong, Vo, Thuc and Thai, Huu-Tai (2015) Vibration and buckling analysis of functionally graded sandwich beams by a new higher-order shear deformation theory. Composites Part B: Engineering, 76. 273- 285. ISSN 1359-8368

O

Ojo, Adedotun Olanrewaju, Rahimian, Farzad Pour, Goulding, Jack and Pye, Christopher (2015) Construction education requirements for achieving level 2 and 3 BIM. In: ARCOM Doctoral Workshop on Construction Education in the New Digital Age, 4th November 2015, Birmingham, UK.

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of Varying Mixing Ratios and Pre-Heat Temperature on the Mechanical Properties of Polyurethane (PU) Foam. Procedia Engineering, 132. pp. 701-708. ISSN 1877-7058

Oppon, Charles, Hackney, Philip, Shyha, Islam and Birkett, Martin (2015) Effect of varying mixing ratios and foaming direction on polyurethane foam for additive manufacturing applications. In: Proceedings of the 14th Conference on Rapid Design, Prototyping and Manufacturing (RDPM) 2015. Lancaster University, Lancaster, pp. 69-77. ISBN 9781526203038

Osofero, Israel, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Analytical solution for vibration and buckling of functionally graded sandwich beams using various quasi-3D theories. Journal of Sandwich Structures and Materials, 18 (1). pp. 3-29. ISSN 1099-6362

P

Pan, Song, Xu, Chuanqi, Wei, Shen, Hassan, Tarek, Xie, Lang, Xiong, Yingzi, Firth, Steven, Greenwood, David and de Wilde, Pieter (2015) Improper window use in office buildings: findings from a longitudinal study in Beijing, China. In: Low-carbon Cities and Urban Energy systems (CUE2015) Conference, 15-17 November 2015, Fuzhou, China.

Parva, Mohammad, Dola, Kamariah and Rahimian, Farzad Pour (2015) Architectural changes and motivational factors for post-earthquake house transformation in Lar City, Iran. Pertanika Journal of Social Science and Humanities, 23 (1). pp. 47-65. ISSN 0128-7702

Perera, Noel, Oriaifo, Aigbokhaebho, Guy, Alan, Leung, Pak Sing and Tan, Kian (2015) Investigating the accelerated test condition to produce cracking failure of water ballast tank coatings. In: The 6th International Congress of Energy and Environment Engineering and Management (CIIEM15),, 22-24 July 2015, Paris.

Poologanathan, Keerthan and Mahendran, Mahen (2015) Experimental investigation and design of lipped channel beams in shear. Thin-Walled Structures, 86. pp. 174-184. ISSN 0263-8231

Putrus, Ghanim, Lacey, Gillian and Bentley, Edward (2015) Towards the integration of electric vehicles into the smart grid. In: E-Mobility in Europe. Springer, London, pp. 345-366. ISBN 9783319131931

Q

Qian, Zi, Charlton, James, Agnew, Brian and Thompson, Emine Mine (2015) A11 Towards an integrated evaluation of the effects on health from smoke or toxic gas dispersion in the evacuation of subway tunnels [Oral Abstract]. Journal of Transport & Health, 2 (2). pp. 10-11. ISSN 2214-1405

R

Rahimian, Farzad Pour, Goulding, Jack, Salama, Ashraf M., Ruddock, Steven and Ibrahim, Hatem Galal Abdelazim (2015) Transnational adaptation model for facilitating technology and expertise mobilisation in Gulf AEC organisations. In: Construct15 - 23rd Global Lean Construction Conference, 28th - 31st July 2015, Perth, Australia.

Rahmati, Mohammad, He, L. and Li, Y. S. (2015) The Blade Profile Orientations Effects on the Aeromechanics of Multirow Turbomachines. Journal of Engineering for Gas Turbines and Power, 138 (6). 062606. ISSN 0742-4795

Raine, Andrew (2015) Improved HVAC energy throughput system. Doctoral thesis, Northumbria University.

Raine, Andrew, Aslam, Nauman, Underwood, Chris and Danaher, Sean (2015) Development of an Ultrasonic Airflow Measurement Device for Ducted Air. Sensors, 15 (5). pp. 10705-10722. ISSN 1424-8220

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2015) Numerical simulation of flow and heat transfer around vertical cylinder submerged in water. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

RazaviAlavi, SeyedReza and AbouRizk, Simaan (2015) A hybrid simulation approach for quantitatively analyzing the impact of facility size on construction projects. Automation in Construction, 60. pp. 39-48. ISSN 0926-5805

Richardson, Alan and Batey, David (2015) Impact resistance of concrete using dovetailed fibres and type 2 synthetic fibres. In: The Fifth International Conference on Construction Materials (CONMAT15), 19-21 August 2015, Whistler.

Richardson, Alan and Coventry, Kathryn (2015) Dovetailed and hybrid synthetic fibre concrete – impact, toughness and strength performance. Construction and Building Materials, 78. 439 -449. ISSN 0950-0618

Richardson, Alan, Coventry, Kathryn and Diaz, Eli (2015) Rubber crumb used in concrete to provide freeze-thaw protection. In: Euro-Elecs-2015: Latin American and European Conference on Sustainable Buildings and Communities, 21-23 July 2015, Guimaraes.

Richardson, Alan, Lamb, Thomas and MacKenzie, David (2015) The addition of synthetic fibres to concrete to improve impact toughness. Concrete, 49 (10). pp. 32-34. ISSN 0010-5317

Richardson, Alan and Pasley, Jack (2015) Bacterial crack repair to concrete. Concrete, 49 (7). pp. 29-30. ISSN 0010-5317

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Analytical study on bond behavior of CFRP bars epoxied into timber elements. In: 3rd International Conference on Structural Health Assessment of Timber Structures (SHATIS '15), 9-11 Sep 2015, Wroclaw, Poland.

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Basalt FRP Spike Repairing of Wood Beams. Fibers, 3 (3). pp. 323-337. ISSN 2079-6439

Righetti, Luca, Corradi, Marco and Borri, Antonio (2015) Strengthening of timber beams with unbonded FRP composites. In: 16th European Bridge Conference, 23-25 June 2015, Edinburgh, UK.

S

Sahadevan, Subash, Shingate, Suyog and Maheri, Alireza (2015) Effect of dispatch strategy on the performance of hybrid wind-PV-battery-diesel-fuel cell systems. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Saharudin, Mohd, Atif, Rasheed, Shyha, Islam and Inam, Fawad (2015) The degradation of mechanical properties in polymer nano-composites exposed to liquid media - a review. RSC Advances, 6. pp. 1076-1089. ISSN 2046-2069

Sanchez Vicente, Yolanda, Stevens, Lee A., Pando, Concepción, Torralvo, María José, Snape, Colin E., Drage, Trevor C. and Cabañas, Albertina (2015) A new sustainable route in supercritical CO2 to functionalize silica SBA-15 with 3-aminopropyltrimethoxysilane as material for carbon capture. Chemical Engineering Journal, 264. pp. 886-898. ISSN 1385-8947

Sedef, Kanber (2015) Usage Driven Design of Power System and Multi-criteria Route Planning for Eco-Urban Electric Cars. Doctoral thesis, Northumbria University.

Sedef, Kanber and Maheri, Alireza (2015) Multiobjective route planner for electric car with dijkstra algorithm. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sedef, Kanber and Maheri, Alireza (2015) A driving cycle generating tool for evaluating eco-urban car power performance. In: International Conference on Advances in Mechanical Engineering (ICAME’15), 13-15 May 2015, Istanbul.

Sheikh, Muhammad, Baglee, David, Knowles, Michael, Elmarakbi, Ahmed and Al Hariri, Mohammad (2015) A Novel Approach for Predicting Thermal Runaway in Electric Vehicle Batteries When Involved in a Collision. In: Volume 12: Transportation Systems. American Society of Mechanical Engineers, V012T15A014. ISBN 978-0-7918-5755-7

Sherratt, Fred, Crapper, Martin, Foster-Smith, Lydia and Walsh, Sinead (2015) Safety and volunteer construction workers. Construction Management and Economics, 33 (5-6). pp. 361-374. ISSN 0144-6193

Shi, Jianjian, Wang, Zhiguo and Fu, Yong Qing (2015) Atomistic study of lithium ion dynamics in Li12Si7. Electrochimica Acta, 186. pp. 71-75. ISSN 0013-4686

Shyha, Islam, Gariani, Salah and Bhatti, M. (2015) Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Procedia Engineering, 132. pp. 577-584. ISSN 1877-7058

Singh, Dharminder, McGlinchey, Don and Crapper, Martin (2015) Breakage Functions of Particles of Four Different Materials Subjected to Uniaxial Compression. In: 8th International Conference for Conveying and Handling of Particulate Solids, 3-7 May 2015, Tel Aviv.

Song, Chao-Yang, Feng, Huijuan, Chen, Yan, Chen, I-Ming and Kang, Rongjie (2015) Reconfigurable mechanism generated from the network of Bennett linkages. Mechanism and Machine Theory, 88. pp. 49-62. ISSN 0094-114X

Sowale, Ayodeji (2015) Modelling and Optimisation of a Free Piston Stirling Engine for Micro-CHP Applications. Doctoral thesis, Northumbria University.

Succar, Bilal and Kassem, Mohamad (2015) Macro-BIM adoption: Conceptual structures. Automation in Construction, 57. pp. 64-79. ISSN 0926-5805

Sun, Xiaoli, Wang, Zhiguo and Fu, Yong Qing (2015) Defect-Mediated Lithium Adsorption and Diffusion on Monolayer Molybdenum Disulfide. Scientific Reports, 5. p. 18712. ISSN 2045-2322

Susilawati, Anita, Tan, John, Bell, David and Sarwar, Mohammed (2015) Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34. pp. 1-11. ISSN 0278 6125

T

Tenorio, Maria-José, Parrott, Andrew J., Calladine, James A., Sanchez Vicente, Yolanda, Cresswell, Alexander J., Graham, Richard S., Drage, Trevor C., Poliakoff, Martyn, Ke, Jie and George, Michael W. (2015) Measurement of the vapour–liquid equilibrium of binary and ternary mixtures of CO2, N2 and H2, systems which are of relevance to CCS technology. International Journal of Greenhouse Gas Control, 41. pp. 68-81. ISSN 1750-5836

Thai, Huu-Tai, Vo, Thuc, Nguyen, Trung-Kien and Lee, Jaehong (2015) Size-dependent behaviour of functionally graded sandwich microbeams based on the modified couple stress theory. Composite Structures, 123. pp. 337-349. ISSN 0263-8223

Tindall, Jess and Pendle, Jamie (2015) Are we significantly oversizing domestic water systems? CIBSE Journal. pp. 41-42.

Tindall, Jess and Pendle, Jamie (2015) Are we significantly oversizing domestic water systems? In: CIBSE Technical Symposium 2015, 16th - 17th April 2015, UCL London.

Tiwary, Abhishek, Williams, Ian, Kishore, V. V. and Pant, Dinesh (2015) Environmental burden minimisation from community-scale anaerobic digestion of food waste using nutrient recycling. In: Bioenergy Australia Conference, 30 Nov - 2 Dec 2015, Tasmania.

Tiwary, Abhishek, Williams, Ian, Pant, Dinesh and Kishore, V. V. (2015) Assessment and mitigation of the environmental burdens to air from land applied food-based digestate. Environmental Pollution, 203. pp. 262-270. ISSN 0269-7491

Tiwary, Abhishek, Williams, Ian, Pant, Dinesh and Kishore, V. V. N. (2015) Emerging perspectives on environmental burden minimisation initiatives from anaerobic digestion technologies for community scale biomass valorisation. Renewable & Sustainable Energy Reviews, 42. pp. 883-901. ISSN 1364-0321

Toll, D. G., Asquith, J. D., Fraser, A., Hassan, Ahmed, Liu, Grace, Lourenço, S., Mendes, Joao, Noguchi, T., Osinki, P. and Stirling, R. (2015) Tensiometer techniques for determining soil water retention curves. In: Unsaturated Soil Mechanics from Theory to Practice - Proceedings of the 6th Asia-Pacific Conference on Unsaturated Soils. Taylor & Francis, pp. 15-22. ISBN 9781138029217

U

Underwood, Chris (2015) Fuzzy multivariable control of domestic heat pumps. Applied Thermal Engineering, 90. pp. 957-969. ISSN 1359-4311

Underwood, Chris, Ng, Bobo and Yik, Francis (2015) Scheduling of Multiple Chillers in Trigeneration Plants. Energies, 8 (10). pp. 11095-11119. ISSN 1996-1073

V

Vo, Thuc and Banerjee, Ranjan (2015) Free Vibration of Axially Loaded Composite Beams using a Quasi-3D Theory. Civil-Comp Proceedings. p. 108. ISSN 1759-3433

Vo, Thuc, Thai, Huu-Tai, Nguyen, Trung-Kien, Inam, Fawad and Lee, Jaehong (2015) A quasi-3D theory for vibration and buckling of functionally graded sandwich beams. Composite Structures, 119. 1- 12. ISSN 0263-8223

W

Wang, Chao, Chang, Shinan and Wu, Hongwei (2015) Lagrangian Approach for Simulating Supercooled Large Droplets’ Impingement Effect. Journal of Aircraft, 52 (2). pp. 524-537. ISSN 0021-8669

Wang, Chen, Chang, Shinan, Wu, Hongwei, Ding, L. and Thompson, James (2015) Theoretical Modeling of Spray Drop Deformation and Breakup in the Multimode Breakup Regime. Atomization and Sprays, 25 (10). pp. 857-869. ISSN 1045-5110

Wang, Kai, Wu, Hongwei, Wang, Dongyu, Tong, Z., Lin, F. and Olabi, Abdul (2015) Experimental Study on a Coiled Tube Solar Receiver under Variable Solar Radiation Condition. Solar Energy, 122. pp. 1080-1090. ISSN 0038-092X

Warren, Craig, Giannakis, Iraklis and Giannopoulos, Antonios (2015) Performance of a Ground Penetrating Radar Antenna in Heterogeneous Environments. In: 8th Congress of the Balkan Geophysical Society, 5th - 8th October 2015, Chania, Crete.

Warren, Craig and Giannopoulos, Antonios (2015) gprMax - a Finite-Difference Time-Domain Electromagnetic Simulator. In: 8th European Conference on Python in Science, 26th - 30th August 2015, Cambridge, UK.

Warren, Craig, Giannopoulos, Antonios, Diamanti, Nectaria and Annan, Peter (2015) An extension module to embed commercially sensitive antenna models in GprMax. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Warren, Craig, Giannopoulos, Antonios and Giannakis, Iraklis (2015) An advanced GPR modelling framework: The next generation of gprMax. In: IWAGPR 2015 - 8th International Workshop on Advanced Ground Penetrating Radar, 7th - 10th July 2015, Florence, Italy.

Wei, Jiacheng, Atif, Rasheed, Vo, Thuc and Inam, Fawad (2015) Graphene nanoplatelets in epoxy system: dispersion, reaggregation, and mechanical properties of nanocomposites. Journal of Nanomaterials (JNM), 2015. p. 561742. ISSN 1687-4110

Wei, Jiacheng, Vo, Thuc and Inam, Fawad (2015) Epoxy/ graphene nanocomposites – processing and properties: a review. RSC Advances, 90 (5). pp. 73510-73524. ISSN 2046-2069

Woods, Thomas (2015) Process mapping in new product development for environmental impact reduction in small and medium manufacturing enterprises. Doctoral thesis, Northumbria University.

Woods, Thomas, Cheung, Wai Ming, Hilton, Kevin and Penlington, Roger (2015) Environmental Impact Reduction for Small and Medium-sized Manufacturing Enterprises in New Product Development. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Worasinchai, Supakit, Ingram, Grant and Dominy, Robert (2015) The physics of H-Darrieus turbine starting behavior. Journal of Engineering for Gas Turbines and Power, 138 (6). ISSN 0742-4795

Wu, Hongwei, Kwatra, R., Mirzaeian, Mojtaba, Liu, Xiangyun and Grant, J. (2015) Experimental Investigation and CFD Analysis of a Y-Fractal Microchannel Based Heat Sink. In: 8th International Conference on Sustainable Energy & Environmental Protection, 11-14 August, 2015, Paisley, UK.

X

Xie, Yongqi, Zhang, Jie, Xie, Liyao, Yu, Yin, Wu, Hongwei, Zhang, Hongxing and Gao, Hongxia (2015) Experimental Investigation On the Operating Characteristics of a Dual Compensation Chamber Loop Heat Pipe Subjected to Acceleration Field. Applied Thermal Engineering, 81. pp. 297-312. ISSN 1359-4311

Xu, Ben (2015) Soft actuator induced by electro-mechanical instability patterns on polyelectrolyte gel surface. In: Fourth International Conference on Multifunctional, Hybrid and Nanomaterials (Hybrid Materials 2015), 9th - 13th March 2015, Sitges, Spain.

Xu, Ben, Frozanpoor, Iman, Wang, Ding, Wells, Gary, Martin, James, Stuart-Cole, Simone, Wood, David and McHale, Glen (2015) Buckling induced surface morphology transition of drying polymer based droplet. In: The 6th International Workshop on Bubble and Drop Interfaces, 6 - 10 July 2015, Potsdam-Golm.

Xu, Ben, Wang, Ding, McHale, Glen, Kusumaatmaja, Halim, Wood, David and Cooke, Michael (2015) Mechanically tuning of the shape and controlling the motion of the droplet on a patterned elastic surface. In: Frontiers in Polymer Science Conference (POLY 2015), 20-22 May 2015, Italy.

Xu, Chenxi, Liu, Xiaoteng, Cheng, Jigui and Scott, Keith (2015) A polybenzimidazole/ionic-liquid-graphite-oxide composite membrane for high temperature polymer electrolyte membrane fuel cells. Journal of Power Sources, 274. pp. 922-927. ISSN 0378-7753

Y

Yu, Shenglan, Li, Yong, Lu, Yunhao, Xu, Ben, Wang, Qiuting, Yan, Mi and Jiang, Yinzhu (2015) A promising cathode material of sodium iron–nickel hexacyanoferrate for sodium ion batteries. Journal of Power Sources, 275. pp. 45-49. ISSN 0378-7753

Z

Zabiegaj, Dominika, Santini, Eva, Ferrari, Michele, Liggieri, L. and Ravera, Francesca (2015) Carbon based porous materials from particle stabilized wet foams. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 473. pp. 24-31. ISSN 0927-7757

Zabiegaj, Dominika, Santini, Eva, GuzmáN, Eduardo, Ferrari, Michele, Liggieri, Libero and Ravera, Francesca (2015) Carbon Soot–Ionic Surfactant Mixed Layers at Water/Air Interfaces. Journal of Nanoscience and Nanotechnology, 15 (5). pp. 3618-3625. ISSN 1533-4880

Zhang, Dan, Wang, Baoqi, Jiang, Yinzhu, Zhou, Peng, Chen, Zhihui, Xu, Ben and Yan, Mi (2015) Enhanced Electrocatalytic Performance of Co3O4/Ketjen-Black Cathodes for Li-O2 Batteries. Journal of Alloys and Compounds, 653. pp. 604-610. ISSN 0925-8388

Zhang, Kui, Mukhriza, Teuku, Liu, Xiaoteng, Greco, Pier Paolo and Chiremba, Elijah (2015) A study on CO2 and CH4 conversion to synthesis gas and higher hydrocarbons by the combination of catalysts and dielectric-barrier discharges. Applied Catalysis A: General, 502. pp. 138-149. ISSN 0926-860X

Zhu, Jianqin, Wang, Kai, Wu, Hongwei, Wang, Dunjin, Du, Juan and Olabi, A. (2015) Experimental Investigation on the Energy and Exergy Performance of a Coiled Tube Solar Receiver. Applied Energy, 156. pp. 519-527. ISSN 0306-2619

This list was generated on Thu Nov 26 15:33:26 2020 UTC.