Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2018

Article

Adeniyi, Oladapo, Azimov, Ulugbek and Burluka, Alexey (2018) Algae biofuel: Current status and future applications. Renewable and Sustainable Energy Reviews, 90. pp. 316-335. ISSN 1364-0321

Agbro, Edirin, Tomlin, Alison, Zhang, Wankang, Burluka, Alexey, Mauss, Fabian, Pasternak, M., Alfazazi, A. and Sarathy, S. M. (2018) Chemical Kinetic Modeling Study on the Influence of n-Butanol Blending on the Combustion, Autoignition, and Knock Properties of Gasoline and Its Surrogate in a Spark-Ignition Engine. Energy & Fuels, 32 (10). pp. 10065-10077. ISSN 0887-0624

Agbro, Edirin, Zhang, Wankang, Tomlin, Alison and Burluka, Alexey (2018) Experimental Study on the Influence of n-butanol Blending on the Combustion, Autoignition and Knock Properties of Gasoline and its Surrogate in a Spark Ignition Engine. Energy & Fuels, 32 (10). pp. 10052-10064. ISSN 0887-0624

Ahmad, Iftikhar, Islam, Mohammad, Alharthi, Nabeel, Alawadhi, Hussain, Subhani, Tayyab, Munir, Khurram, Shah, Syed Ismat, Inam, Fawad and Zhu, Yanqiu (2018) Chemical and structural analyses of the graphene nanosheet/alumina ceramic interfacial region in rapidly consolidated ceramic nanocomposites. Journal of Composite Materials, 52 (3). pp. 417-428. ISSN 0021-9983

Ahmed, Ahmed Louay and Kassem, Mohamad (2018) A unified BIM adoption taxonomy: Conceptual development, empirical validation and application. Automation in Construction, 96. pp. 103-127. ISSN 0926-5805

Al Hamd, Rwayda Kh S., Gillie, Martin, Warren, Holly, Torelli, Giacomo, Stratford, Tim and Wang, Yong (2018) The effect of load-induced thermal strain on flat slab behaviour at elevated temperatures. Fire Safety Journal, 97. pp. 12-18. ISSN 0379-7112

Al-Ajrah, Saja, Lafdi, Khalid, Liu, Yufei and Le Coustumer, Philippe (2018) Fabrication of ceramic nanofibers using polydimethylsiloxane and polyacrylonitrile polymer blends. Journal of Applied Polymer Science, 135 (10). p. 45967. ISSN 0021-8995

Al-Ajrash, Saja M. Nabat, Lafdi, Khalid, Vasquez, Erick S., Chinesta, Francisco and Le Coustumer, Philippe (2018) Experimental and Numerical Investigation of the Silicon Particle Distribution in Electrospun Nanofibers. Langmuir, 34 (24). pp. 7147-7152. ISSN 0743-7463

Al-Maghalseh, Maher and Mahkamov, Khamid (2018) Methods of heat transfer intensification in PCM thermal storage systems: Review paper. Renewable and Sustainable Energy Reviews, 92. pp. 62-94. ISSN 1364-0321

Apichonnabutr, Wuttipong and Tiwary, Abhishek (2018) Trade-offs between economic and environmental performance of an autonomous hybrid energy system using micro hydro. Applied Energy, 226. pp. 891-904. ISSN 0306-2619

Arteconi, Alessia, Del Zotto, Luca, Tascioni, Roberto, Mahkamov, Khamid, Underwood, Chris, Cabeza, Luisa, Maldonado, Jose, Manca, Roberto, Mintsa, André, Bartolini, Carlo, Gimbernat, Toni, Botargues, Teresa, Halimic, Elvedin and Cioccolanti, Luca (2018) Multi-Country Analysis on Energy Savings in Buildings by Means of a Micro-Solar Organic Rankine Cycle System: A Simulation Study. Environments, 5 (11). p. 119. ISSN 2076-3298

Azimov, Ulugbek, Callaghan, Jack, Frozanpoor, Iman, Hulsmeier, Callum, Kwok, Christopher and Nixon, Matthew (2018) A novel vortex-assisted generation system for hydrokinetic energy harvesting from slow water currents. International Journal of Energy and Environment, 9 (4). pp. 317-352. ISSN 2076-2895

Borri, Antonio, Corradi, Marco, De Maria, Alessandro and Sisti, Romina (2018) Calibration of a visual method for the analysis of the mechanical properties of historic masonry. Procedia Structural Integrity, 11. pp. 418-427. ISSN 2452-3216

Bortot, Eliana (2018) Nonlinear dynamic response of soft thick-walled electro-active tubes. Smart Materials and Structures, 27 (10). p. 105025. ISSN 0964-1726

Bortot, Eliana, Amir, Oded and Shmuel, Gal (2018) Topology optimization of dielectric elastomers for wide tunable band gaps. International Journal of Solids and Structures, 143. pp. 262-273. ISSN 0020-7683

Bortot, Eliana and Shmuel, Gal (2018) Prismatic bifurcations of soft dielectric tubes. International Journal of Engineering Science, 124. pp. 104-114. ISSN 0020-7225

Bruno, Agostino Walter, Perlot, Céline, Mendes, Joao and Gallipoli, Domenico (2018) A microstructural insight into the hygro-mechanical behaviour of a stabilised hypercompacted earth. Materials and Structures, 51 (1). p. 32. ISSN 1359-5997

Burhan, Muhammad, Shahzad, Muhammad Wakil and Ng, Kim Choon (2018) Energy distribution function based universal adsorption isotherm model for all types of isotherm. International Journal of Low-Carbon Technologies, 13 (3). pp. 292-297. ISSN 1748-1325

Burhan, Muhammad, Shahzad, Muhammad Wakil and Ng, Kim Choon (2018) Hydrogen at the rooftop: Compact CPV-hydrogen system to convert sunlight to hydrogen. Applied Thermal Engineering, 132. pp. 154-164. ISSN 1359-4311

Corradi, Marco, Sisti, Romina and Borri, Antonio (2018) Effect of Thin Cement-Based Renders on the Structural Response of Masonry Wall Panels. Applied Sciences, 8 (1). p. 98. ISSN 2076-3417

Corradi, Marco, Vo, Thuc, Poologanathan, Keerthan and Osofero, Adelaja Israel (2018) Flexural behaviour of hardwood and softwood beams with mechanically connected GFRP plates. Composite Structures, 206. pp. 610-620. ISSN 0263-8223

Cotterill, Sarah, Dolfing, Jan, Curtis, Thomas and Heidrich, Elizabeth (2018) Community assembly in wastewater-fed pilot-scale microbial electrolysis cells. Frontiers in Energy Research, 6. pp. 1-12.

Di Schino, A. and Corradi, Marco (2018) Quenching and tempering (Q&T) effect on a steel for forging with Cr and Mo addition. Metalurgija = Metallurgy, 57 (4). pp. 307-309. ISSN 0543-5846

Dias, Yomal, Poologanathan, Keerthan and Mahendran, Mahen (2018) Predicting the fire performance of LSF walls made of web stiffened channel sections. Engineering Structures, 168. pp. 320-332. ISSN 0141-0296

Edmondson, Vikki, Cerny, Martin, Lim, Michael, Gledson, Barry, Lockley, Steve and Woodward, John (2018) A smart sewer asset information model to enable an ‘Internet of Things’ for operational wastewater management. Automation in Construction, 91. pp. 193-205. ISSN 0926-5805

Edmondson, Vikki, Sherratt, Fred, Roff, Richard and Levett, Andy (2018) Advancing tunnelling: the Victorian engineering management legacy. Proceedings of the Institution of Civil Engineers - Forensic Engineering, 171 (2). pp. 49-57. ISSN 2043-9903

El Moumen, A., Tarfaoui, M., Hassoon, O., Lafdi, Khalid, Benyahia, H. and Nachtane, M. (2018) Experimental Study and Numerical Modelling of Low Velocity Impact on Laminated Composite Reinforced with Thin Film Made of Carbon Nanotubes. Applied Composite Materials, 25 (2). pp. 309-320. ISSN 0929-189X

El Moumen, A., Tarfaoui, M. and Lafdi, Khalid (2018) Computational Homogenization of Mechanical Properties for Laminate Composites Reinforced with Thin Film Made of Carbon Nanotubes. Applied Composite Materials, 25 (3). pp. 569-588. ISSN 0929-189X

El Rhazi, Mama, Majid, Sanaa, Elbasri, Miloud, Salih, Fatima Ezzahra, Oularbi, Larbi and Lafdi, Khalid (2018) Recent progress in nanocomposites based on conducting polymer: application as electrochemical sensors. International Nano Letters, 8 (2). pp. 79-99. ISSN 2008-9295

El-Sayed, Mahmoud Ahmed, Shyha, Islam and Basuny, Fawzia Hamed (2018) Effect of hydrogen content on the double oxide film defects and properties of aluminium castings: A review. Journal of Engineering Technology, 6. pp. 225-244.

Elmarakbi, Ahmed, Elkady, Mustafa and MacIntyre, John (2018) Numerical analysis of vehicle-to-vehicle impact using vehicle dynamics control systems for collision mitigation. International Journal of Dynamics and Control, 1 (2). pp. 172-191. ISSN 2195-268X

Farajpour, Ali, Farokhi, Hamed, Ghayesh, Mergen and Hussain, Shahid (2018) Nonlinear mechanics of nanotubes conveying fluid. International Journal of Engineering Science, 133. pp. 132-143. ISSN 0020-7225

Farajpour, Ali, Ghayesh, Mergen and Farokhi, Hamed (2018) A review on the mechanics of nanostructures. International Journal of Engineering Science, 133. pp. 231-263. ISSN 0020-7225

Fargani, Haitem, Cheung, Wai Ming and Hasan, Reaz (2018) Ranking of factors that underlie the drivers of sustainable manufacturing based on their variation in a sample of UK manufacturing plants. International Journal of Manufacturing Technology and Management (IJMTM), 32 (3). pp. 297-311. ISSN 1368-2148

Farhad, Farnoosh, Smyth-Boyle, D., Zhang, X., Wallis, I. and Panggabean, D. (2018) Laboratory apparatus for in-situ corrosion fatigue testing and characterisation of fatigue cracks using X-ray micro-computed tomography. Fatigue and Fracture of Engineering Materials and Structures, 41 (12). pp. 2629-2637. ISSN 8756-758X

Farokhi, Hamed and Ghayesh, Mergen (2018) Nonlinear mechanical behaviour of microshells. International Journal of Engineering Science, 127. pp. 127-144. ISSN 0020-7225

Farokhi, Hamed and Ghayesh, Mergen (2018) Nonlinear mechanics of electrically actuated microplates. International Journal of Engineering Science, 123. pp. 197-213. ISSN 0020-7225

Farokhi, Hamed and Ghayesh, Mergen (2018) Supercritical nonlinear parametric dynamics of Timoshenko microbeams. Communications in Nonlinear Science and Numerical Simulation, 59. pp. 592-605. ISSN 1007-5704

Farokhi, Hamed and Ghayesh, Mergen (2018) Viscoelastic resonant responses of shear deformable imperfect microbeams. Journal of Vibration and Control, 24 (14). pp. 3049-3062. ISSN 1077-5463

Farokhi, Hamed, Ghayesh, Mergen, Gholipour, Alireza and Hussain, Shahid (2018) Resonant responses of three-layered shear-deformable microbeams. Microsystem Technologies, 24 (5). pp. 2123-2136. ISSN 0946-7076

Farokhi, Hamed, Ghayesh, Mergen, Gholipour, Alireza and Tavallaeinejad, Mohammad (2018) Stability and nonlinear dynamical analysis of functionally graded microplates. Microsystem Technologies, 24 (5). pp. 2109-2121. ISSN 0946-7076

Farokhi, Hamed and Ghayesh, Mergen H. (2018) On the dynamics of imperfect shear deformable microplates. International Journal of Engineering Science, 133. pp. 264-283. ISSN 0020-7225

Farokhi, Hamed, Ghayesh, Mergen H., Gholipour, Alireza and Hussain, Shahid (2018) Modal interactions and energy transfers in large-amplitude vibrations of functionally graded microcantilevers. Journal of Vibration and Control, 24 (17). pp. 3882-3893. ISSN 1077-5463

Farokhi, Hamed, Païdoussis, Michael and Misra, Arun (2018) Nonlinear behaviour and mass detection sensitivity of geometrically imperfect cantilevered carbon nanotube resonators. Communications in Nonlinear Science and Numerical Simulation, 65. pp. 272-298. ISSN 1007-5704

Farokhi, Hamed, Païdoussis, Michael and Misra, Arun (2018) Nonlinear behaviour of cantilevered carbon nanotube resonators based on a new nonlinear electrostatic load model. Journal of Sound and Vibration, 419. pp. 604-629. ISSN 0022-460X

Feng, Huijuan, Ma, Jiayao, Chen, Yan and You, Zhong (2018) Twist of Tubular Mechanical Metamaterials Based on Waterbomb Origami. Scientific Reports, 8 (1). ISSN 2045-2322

Feng, Huijuan, Peng, Rui, Ma, Jiayao and Chen, Yan (2018) Rigid Foldability of Generalized Triangle Twist Origami Pattern and Its Derived 6R Linkages. Journal of Mechanisms and Robotics, 10 (5). ISSN 1942-4302

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2018) Experimental Analysis of System Parameters for Minimum Cutting Fluid Consumption when Machining Ti-6Al-4V Using a Novel Supply System. International Journal of Advanced Manufacturing Technology, 95 (5-8). pp. 2795-2809. ISSN 0268-3768

Ghayesh, Mergen and Farokhi, Hamed (2018) Bending and vibration analyses of coupled axially functionally graded tapered beams. Nonlinear Dynamics, 91 (1). pp. 17-28. ISSN 0924-090X

Ghayesh, Mergen and Farokhi, Hamed (2018) Mechanics of tapered axially functionally graded shallow arches. Composite Structures, 188. pp. 233-241. ISSN 0263-8223

Ghayesh, Mergen and Farokhi, Hamed (2018) Nonlinear behaviour of electrically actuated microplate-based MEMS resonators. Mechanical Systems and Signal Processing, 109. pp. 220-234. ISSN 0888-3270

Ghayesh, Mergen and Farokhi, Hamed (2018) Nonlinear dynamics of doubly curved shallow microshells. Nonlinear Dynamics, 92 (3). pp. 803-814. ISSN 0924-090X

Ghayesh, Mergen and Farokhi, Hamed (2018) On the viscoelastic dynamics of fluid-conveying microtubes. International Journal of Engineering Science, 127. pp. 186-200. ISSN 0020-7225

Ghayesh, Mergen and Farokhi, Hamed (2018) Size-dependent internal resonances and modal interactions in nonlinear dynamics of microcantilevers. International Journal of Mechanics and Materials in Design, 14 (1). pp. 127-140. ISSN 1569-1713

Ghayesh, Mergen, Farokhi, Hamed and Farajpour, Ali (2018) Chaotic oscillations of viscoelastic microtubes conveying pulsatile fluid. Microfluidics and Nanofluidics, 22. p. 72. ISSN 1613-4982

Ghayesh, Mergen, Farokhi, Hamed, Gholipour, Alireza and Tavallaeinejad, Mohammad (2018) Nonlinear oscillations of functionally graded microplates. International Journal of Engineering Science, 122. pp. 56-72. ISSN 0020-7225

Giannopoulos, Antonis, Diamanti, Nectaria and Warren, Craig (2018) Introduction to the JEEG Special Issue on IWAGPR2017. Journal of Environmental and Engineering Geophysics, 23 (4). v-vi. ISSN 1083-1363

Hassen, D., Shenashen, M. A., El-Safty, A. R., Elmarakbi, Ahmed and El-Safty, S. A. (2018) Anisotropic N-Graphene-diffused Co3O4 nanocrystals with dense upper-zone top-on-plane exposure facets as effective ORR electrocatalysts. Scientific Reports, 8 (1). p. 3740. ISSN 2045-2322

Heidrich, E. S., Dolfing, Jan, Wade, M. J., Sloan, W. T., Quince, C. and Curtis, T. P. (2018) Temperature, inocula and substrate: Contrasting electroactive consortia, diversity and performance in microbial fuel cells. Bioelectrochemistry, 119. pp. 43-50.

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Experimental and numerical investigations of CFRP strengthened short SHS steel columns. Engineering Structures, 175. pp. 879-894. ISSN 0141-0296

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Heat transfer modelling of CFRP strengthened and insulated steel tubular columns. Construction and Building Materials, 184. pp. 278-294. ISSN 0950-0618

Imran, Mohamed, Mahendran, Mahen and Poologanathan, Keerthan (2018) Mechanical properties of cold-formed steel tubular sections at elevated temperatures. Journal of Constructional Steel Research, 143. pp. 131-147. ISSN 0143-974X

Iqbal, Sadia Sagar, Inam, Fawad, Bahadar, Ali, Bashir, Arshad, Hassan, Faiza, Khan, Mohammad Bilal, Khan, Zaffar and Jamil, Tahir (2018) Ablation, thermal stability/transport/phase transition study of carbon nanofiber-reinforced elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 131 (3). pp. 2637-2646. ISSN 1588-2926

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127. pp. 534-545. ISSN 0017-9310

Jiang, Enhui, Liu, Xiaoteng, Che, Huinan, Liu, Chunbo, Dong, Hongjun and Che, Guangbo (2018) Visible-light-driven Ag/Bi3O4Cl nanocomposite photocatalyst with enhanced photocatalytic activity for degradation of tetracycline. RSC Advances, 8 (65). pp. 37200-37207. ISSN 2046-2069

Joosten, Matthew, Yang, Qingda, Blacklock, Matthew and Wang, C. H. (2018) A cohesive network approach for modelling fibre and matrix damage in composite laminates. Composite Structures, 206. pp. 658-667. ISSN 0263-8223

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2018) Dynamic simulation of machining composites using the explicit element-free Galerkin method. Composite Structures, 198. pp. 156-173. ISSN 0263-8223

Kane, Malal and Edmondson, Vikki (2018) Modelling the bitumen scour effect: Enhancement of a dynamic friction model to predict the skid resistance of rubber upon asphalt pavement surfaces subjected to wear by traffic polishing. Wear, 400-40. pp. 100-110. ISSN 0043-1648

Karamanlı, Armağan and Vo, Thuc (2018) Size dependent bending analysis of two directional functionally graded microbeams via a quasi-3D theory and finite element method. Composites Part B: Engineering, 144. pp. 171-183. ISSN 1359-8368

Koller, Martin, Al Rowaihi, Israa Salem, Paillier, Alexis, Rasul, Shahid, Karan, Ram, Grötzinger, Stefan Wolfgang, Takanabe, Kazuhiro and Eppinger, Jörg (2018) Poly(3-hydroxybutyrate) production in an integrated electromicrobial setup: Investigation under stress-inducing conditions. PLoS ONE, 13 (4). e0196079. ISSN 1932-6203

Kong, Lingping, Liu, Terence, Wei, Jin Jia, Wang, Steven, Xu, Bin, Long, Donghui and Chen, Fei (2018) T-Nb2O5 nanoparticle enabled pseudocapacitance with a fast Li-ion intercalation. Nanoscale, 10 (29). pp. 14165-14170. ISSN 2040-3364

Kumar, Rahul, Han, Wei, Liu, Dejun, Ng, Wai Pang, Binns, Richard, Busawon, Krishna, Fu, Yong Qing, Ghassemlooy, Zabih, Underwood, Chris, Mahkamov, Khamid, Yuan, Jinhui, Yu, Chongxiu, Shu, Huazhong, Li, Xing Ao, Guo, Tuan, Farrell, Gerald, Semenova, Yuliya and Wu, Qiang (2018) Optical fibre sensors for monitoring phase transitions in phase changing materials. Smart Materials and Structures, 27 (10). p. 105021. ISSN 0964-1726

Li, Chunchun, Xiang, Huaicheng, Xu, Minyu, Khaliq, Jibran, Chen, Junqi and Fang, Liang (2018) Low-firing and temperature stable microwave dielectric ceramics: Ba2LnV3O11 (Ln = Nd, Sm). Journal of the American Ceramic Society, 101 (2). pp. 773-781. ISSN 0002-7820

Liu, Chang, Sergeichev, Ivan, Akhatov, Iskander and Lafdi, Khalid (2018) CNT and polyaniline based sensors for the detection of acid penetration in polymer composite. Composites Science and Technology, 159. pp. 111-118. ISSN 0266-3538

Liu, Huaxin and Qi, Xiaohui (2018) Random field characterization of uniaxial compressive strength and elastic modulus for intact rocks. Geoscience Frontiers, 9 (6). pp. 1609-1618. ISSN 1674-9871

Liu, Terence, Xi, Jiabin, Xu, Bin, Fang, Bo, Wang, Yucheng, Bayati, Maryam, Scott, Keith and Gao, Chao (2018) A High-Performance Direct Methanol Fuel Cell Technology Enabled by Mediating High-Concentration Methanol through Graphene Aerogel. Small Methods, 2 (10). p. 1800138. ISSN 2366-9608

Luo, Kun, Zhu, Guangbin, Zhao, Yuzhen, Luo, Zhihong, Liu, Terence, Zhang, Kui, Li, Yali and Scott, Keith (2018) Enhanced cycling stability of Li–O2 batteries by using a polyurethane/SiO2/glass fiber nanocomposite separator. Journal of Materials Chemistry A, 6 (17). pp. 7770-7776. ISSN 2050-7488

Maduka, Nnamdi, Edwards, Helen, Greenwood, David, Osborne, Allan and Babatunde, Solomon (2018) Analysis of competencies for effective virtual team leadership in building successful organisations. Benchmarking, 25 (2). pp. 696-712. ISSN 1463-5771

Malik, Faheem, Ali, Saqib, Zahoor, Uzair Zahid and Ashraf, Ifra (2018) Sustainable Transport for a Central Business District. International Journal of Advance Research in Science and Engineering, 7 (Sp4). pp. 2203-2212. ISSN 2319-8354

Maqbool, Rashid, Rashid, Yahya, Sultana, Saira and Sudong, Ye (2018) Identifying the critical success factors and their relevant aspects for renewable energy projects; An empirical perspective. Journal of Civil Engineering and Management, 24 (3). pp. 223-237. ISSN 1392-3730

Martin, Nick (2018) Were Team GB’s skeleton suits responsible for fantastic three medal haul? The Conversation.

McLaggan, M. S., Hadden, R. M. and Gillie, Martin (2018) Fire Performance of Phase Change Material Enhanced Plasterboard. Fire Technology, 54 (1). pp. 117-134. ISSN 0015-2684

Meijer, Marius-Corné and Dala, Laurent (2018) Local Piston Theory as an Alternative to Mesh Deformation: Slender Wing/Body Configurations. Journal of Aircraft, 55 (4). pp. 1709-1719. ISSN 0021-8669

Moehler, Robert, Hope, Alex and Algeo, Chivonne (2018) Sustainable Project Management: Revolution or Evolution? Academy of Management Proceedings, 2018 (1). p. 13583. ISSN 0065-0668

Nguyen, Nam V., Nguyen, Hoang, Lee, Seunghye and Nguyen-Xuan, H. (2018) Geometrically nonlinear polygonal finite element analysis of functionally graded porous plates. Advances in Engineering Software, 126. pp. 110-126. ISSN 0965-9978

Nguyen, Ngoc-Duong, Nguyen, Trung-Kien, Thai, Huu-Tai and Vo, Thuc P. (2018) A Ritz type solution with exponential trial functions for laminated composite beams based on the modified couple stress theory. Composite Structures, 191. pp. 154-167. ISSN 0263-8223

Nguyen, Ngoc-Duong, Nguyen, Trung-Kien, Vo, Thuc and Thai, Huu-Tai (2018) Ritz-Based Analytical Solutions for Bending, Buckling and Vibration Behavior of Laminated Composite Beams. International Journal of Structural Stability and Dynamics, 18 (11). p. 1850130. ISSN 0219-4554

Nguyen, Vinh, Ginige, Kanchana and Greenwood, David (2018) Challenges in integrating disaster risk reduction into the built environment – The Vietnam context. Procedia Engineering, 212. pp. 316-323. ISSN 1877-7058

Okolo, Chinyere and Inam, Fawad (2018) Observations of a novel strengthening mechanism in HDPE nanocomposites. Nanocomposites, 4 (4). pp. 215-222. ISSN 2055-0324

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Comparative LCA of technology improvement opportunities for a 1.5 MW wind turbine in the context of an onshore wind farm. Clean Technologies and Environmental Policy, 20 (1). pp. 173-190. ISSN 1618-954X

Ozoemena, Matthew, Cheung, Wai Ming and Hasan, Reaz (2018) Improving uncertainty analysis of embodied energy and embodied carbon in wind turbine design. International Journal of Advanced Manufacturing Technology, 94 (5-8). pp. 1565-1577. ISSN 0268-3768

Parsa, Maria, Harmand, Souad and Sefiane, Khellil (2018) Mechanisms of pattern formation from dried sessile drops. Advances in Colloid and Interface Science, 254. pp. 22-47. ISSN 0001-8686

Peng, Shuang, Dolfing, Jan, Feng, Youzhi, Wang, Yiming and Lin, Xiangui (2018) Enrichment of the antibiotic resistance gene tet(L) in an alkaline soil fertilized with plant derived organic manure. Frontiers in Microbiology, 9 (MAY). ISSN 1664-302X

Poljak, Dragan, Cvetković, Mario, Bottauscio, Oriano, Hirata, Akimasa, Laakso, Ilkka, Neufeld, Esra, Reboux, Sylvain, Warren, Craig, Giannopolous, Antonis and Costen, Fumie (2018) On the use of Conformal Models and Methods in Dosimetry for Non-Uniform Field Exposure. IEEE Transactions on Electromagnetic Compatibility, 60 (2). pp. 328-337. ISSN 0018-9375

Poologanathan, Keerthan, Mahendran, Mahen and Wanniarachchi, Somadasa (2018) Experimental Shear Study of Rivet-Fastened Rectangular Hollow Flange Channel Beams with Web Openings. Journal of Structural Engineering, 144 (4). 04018020. ISSN 0733-9445

Raimondo, Marialuigia, Guadagno, Liberata, Vertuccio, Luigi, Naddeo, Carlo, Barra, Giuseppina, Spinelli, Giovanni, Lamberti, Patrizia, Tucci, Vincenzo and Lafdi, Khalid (2018) Electrical conductivity of carbon nanofiber reinforced resins: Potentiality of Tunneling Atomic Force Microscopy (TUNA) technique. Composites Part B: Engineering, 143. pp. 148-160. ISSN 1359-8368

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds using well-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Richardson, Alan (2018) Meeting the demands of industry and employers. Concrete, 52 (5). pp. 41-42.

Romano, Vittorio, Naddeo, Carlo, Vertuccio, L., Lafdi, Khalid and Guadagno, Liberata (2018) Anisotropic thermal conductivity study of nano-additives/epoxy based nanocomposites. AIP Conference Proceedings, 1981. 020148. ISSN 0094-243X

Sanchez Vicente, Yolanda, Tay, Weparn J., Al Ghafri, Saif Z. and Trusler, J.P. Martin (2018) Thermodynamics of carbon dioxide-hydrocarbon systems. Applied Energy, 220. pp. 629-642. ISSN 0306-2619

Schaefer, Dirk and Cheung, Wai Ming (2018) Smart Packaging: Opportunities and Challenges. Procedia CIRP, 72. pp. 1022-1027. ISSN 2212-8271

Selim, Mohamed, Elmarakbi, Ahmed, Azzam, Ahmed, Shenashen, Mohamed, EL-Saeed, Ashraf and El-Safty, Sherif A. (2018) Eco-friendly design of superhydrophobic nano-magnetite/silicone composites for marine foul-release paints. Progress in Organic Coatings, 116. pp. 21-34. ISSN 0300-9440

Seyedzadeh, Saleh, Rahimian, Farzad Pour, Glesk, Ivan and Roper, Mark (2018) Machine Learning for Estimation of Building Energy Consumption and Performance: A Review. Visualization in Engineering, 6. p. 5. ISSN 2213-7459

Shahzad, Muhammad Wakil, Burhan, Muhammad, Ghaffour, Noreddine and Ng, Kim Choon (2018) A multi evaporator desalination system operated with thermocline energy for future sustainability. Desalination, 435. pp. 268-277. ISSN 0011-9164

Shemfe, Mobolaji, Gadkari, Siddharth, Yu, Eileen, Rasul, Shahid, Scott, Keith, Head, Ian M., Gu, Sai and Sadhukhan, Jhuma (2018) Life cycle, techno-economic and dynamic simulation assessment of bioelectrochemical systems: A case of formic acid synthesis. Bioresource Technology, 255. pp. 39-49. ISSN 0960-8524

Shi, Le, Zhuo, Sifei, Abulikemu, Mutalifu, Mettela, Gangaiah, Palaniselvam, Thangavelu, Rasul, Shahid, Tang, Bo, Yan, Buyi, Saleh, Navid B. and Wang, Peng (2018) Annealing temperature effects on photoelectrochemical performance of bismuth vanadate thin film photoelectrodes. RSC Advances, 8 (51). pp. 29179-29188. ISSN 2046-2069

Shyha, Islam, Gariani, Salah, El-Sayed, Mahmoud and Huo, Dehong (2018) Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V. Metals, 8 (3). p. 185. ISSN 2075-4701

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2018) Lateral distortional buckling of rivet fastened rectangular hollow flange channel beams. Journal of Constructional Steel Research, 144. pp. 295-309. ISSN 0143-974X

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2018) Section moment capacity design rules for rivet fastened rectangular hollow flange channel beams. Thin-Walled Structures, 127. pp. 781-797. ISSN 0263-8231

Siddiqui, Farrukh Arsalan, She, Qianhong, Fane, Anthony G. and Field, Robert (2018) Exploring the differences between forward osmosis and reverse osmosis fouling. Journal of Membrane Science, 565. pp. 241-253. ISSN 0376-7388

Simha Martynková, Gražyna, Kovár, Filip, Pazourková, Lenka, Valášková, Marta and Lafdi, Khalid (2018) Graphite an exfoliated and organomodified filler for polymeric nanocomposites. Materials Today: Proceedings, 5. S103-S108. ISSN 2214-7853

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2018) Design of SupaCee Sections Subject to Web Crippling under One-Flange Load Cases. Journal of Structural Engineering, 144 (12). 04018222. ISSN 0733-9445

Suwondo, Riza, Cunningham, Lee, Gillie, Martin and Bailey, Colin (2018) Improving the performance of composite floors subjected to post-earthquake fire. Fire Safety Journal, 102. pp. 18-26. ISSN 0379-7112

Suwondo, Riza, Gillie, Martin, Cunningham, Lee and Bailey, Colin (2018) Effect of earthquake damage on the behaviour of composite steel frames in fire. Advances in Structural Engineering, 21 (16). pp. 2589-2604. ISSN 1369-4332

Tarfaoui, M, El Moumen, A, Lafdi, Khalid, Hassoon, OH and Nachtane, M (2018) Inter laminar failure behavior in laminate carbon nanotubes-based polymer composites. Journal of Composite Materials, 52 (26). pp. 3655-3667. ISSN 0021-9983

Tarfaoui, Mostapha, Lafdi, Khalid, Beloufa, Imane, Daloia, Debora and Muhsan, Ali (2018) Effect of Graphene Nano-Additives on the Local Mechanical Behavior of Derived Polymer Nanocomposites. Polymers, 10 (6). p. 667. ISSN 2073-4360

Tasnim, Sadia, Rahman, Muhammad and Ahmadi, Raudhah Binti (2018) Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment. Construction and Building Materials, 162. pp. 534-542. ISSN 0950-0618

Teng, Xiangyu, Chen, Wanqun, Huo, Dehong, Shyha, Islam and Lin, Chao (2018) Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures, 203. pp. 636-647. ISSN 0263-8223

Teng, Xiangyu, Huo, Dehong, Chen, Wanqung, Wong, Eugene, Zheng, Lu and Shyha, Islam (2018) Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes, 32. pp. 116-126. ISSN 1526-6125

Teng, Xiangyu, Huo, Dehong, Shyha, Islam, Chen, Wanqun and Wong, Eugene (2018) An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology, 96 (5-8). pp. 2127-2140. ISSN 0268-3768

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Lee, Seunghye (2018) Postbuckling analysis of functionally graded nanoplates based on nonlocal theory and isogeometric analysis. Composite Structures, 201. pp. 13-20. ISSN 0263-8223

Thai, Son, Thai, Huu-Tai, Vo, Thuc and Patel, Vipulkumar Ishvarbhai (2018) A simple shear deformation theory for nonlocal beams. Composite Structures, 183. pp. 262-270. ISSN 0263-8223

Tiwary, Abhishek, Godsmark, K. and Smethurst, J. (2018) Field evaluation of precipitation interception potential of green façades. Ecological Engineering, 122. pp. 69-75. ISSN 0925-8574

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2018) A confinement-dependent load-induced thermal strain constitutive model for concrete subjected to temperatures up to 500 °C. International Journal of Mechanical Sciences, 144. pp. 887-896. ISSN 0020-7403

Trinh, Luan, Vo, Thuc, Thai, Huu-Tai and Nguyen, Trung-Kien (2018) Size-dependent vibration of bi-directional functionally graded microbeams with arbitrary boundary conditions. Composites Part B: Engineering, 134. pp. 225-245. ISSN 1359-8368

Trinh, Luan, Vo, Thuc, Thai, Tai, Nguyen, Kien and Poologanathan, Keerthan (2018) State-space Levy solution for size-dependent static, free vibration and buckling behaviours of functionally graded sandwich plates. Composites Part B: Engineering, 149. pp. 144-164. ISSN 1359-8368

Turkalj, Goran, Lanc, Domagoj, Banić, Damjan, Brnić, Josip and Vo, Thuc (2018) A shear-deformable beam model for stability analysis of orthotropic composite semi-rigid frames. Composite Structures, 189. pp. 648-660. ISSN 0263-8223

Underwood, C.P., Shepherd, T., Bull, S.J. and Joyce, S. (2018) Hybrid thermal storage using coil-encapsulated phase change materials. Energy and Buildings, 159. pp. 357-369. ISSN 0378-7788

Vichare, Parag, Zhang, Xianzhi, Dhokia, Vimal, Cheung, Wai Ming, Xiao, Wenlei and Zheng, Lianyu (2018) Computer Numerical Control Machine Tool Information Reusability within Virtual Machining Systems. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (4). pp. 593-604. ISSN 0954-4054

Villapún Puzas, Victor Manuel, Lukose, Cecil, Birkett, Martin, Dover, Lynn and Gonzalez Sanchez, Sergio (2018) Tuning the antimicrobial behaviour of Cu 85 Zr 15 thin films in “wet” and “dry” conditions through structural modifications. Surface and Coatings Technology, 350. pp. 334-345. ISSN 0257-8972

Wang, Ding, Cheewaruangroj, Nontawit, Li, Yifan, McHale, Glen, Jiang, Yingzhu, Wood, David, Biggins, John Simeon and Xu, Ben (2018) Spatially configuring wrinkle pattern and multiscale surface evolution with structural confinement. Advanced Functional Materials, 28 (1). p. 1704228. ISSN 1616-3028

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2018) Effects of surfactants on the properties of epoxy/graphene nanocomposites. Journal of Reinforced Plastics and Composites. ISSN 0731-6844

Westoby, Matt, Lim, Michael, Hogg, Michelle, Pound, Matthew, Dunlop, Lesley and Woodward, John (2018) Cost-effective erosion monitoring of coastal cliffs. Coastal Engineering, 138. pp. 152-164. ISSN 0378-3839

Wrobel-Tobiszewska, A., Boersma, M., Sargison, J., Adams, P., Singh, B., Franks, Stewart, Birch, C. J. and Close, D. C. (2018) Nutrient changes in potting mix and Eucalyptus nitens leaf tissue under macadamia biochar amendments. Journal of Forestry Research, 29 (2). pp. 383-393. ISSN 1007-662X

Zabiegaj, Dominika, Caccia, Mario, Casco, Mirian, Ravera, Francesca and Narciso, Javier (2018) Synthesis of carbon monoliths with a tailored hierarchical pore structure for selective CO2 capture. Journal of CO2 Utilization, 26. pp. 36-44. ISSN 2212-9820

Zhang, Shan, Hou, Yinglai, Chen, Heng, Liao, Zijun, Chen, Jianxin, Xu, Bin and Kong, Jie (2018) Reduction-Responsive Amphiphilic Star Copolymers with Long-chain Hyperbranched Poly(ε-caprolactone) Core and Disulfide Bonds for Trigger Release of Anticancer Drugs. European Polymer Journal, 108. pp. 364-372. ISSN 0014-3057

Zhang, Shaobin, Chen, Xue, Moumni, Ziad and He, Yongjun (2018) Coexistence and compatibility of martensite reorientation and phase transformation in high-frequency magnetic-field-induced deformation of Ni-Mn-Ga single crystal. International Journal of Plasticity, 110. pp. 110-122. ISSN 0749-6419

Zhang, Shaobin, Chen, Xue, Moumni, Ziad and He, Yongjun (2018) Thermal effects on high-frequency magnetic-field-induced martensite reorientation in ferromagnetic shape memory alloys: An experimental and theoretical investigation. International Journal of Plasticity, 108. pp. 1-20. ISSN 0749-6419

Book Section

Azimov, Ulugbek, Kawahara, Nobuyuki, Tsuboi, Kazuya and Tomita, Eiji (2018) Advanced Combustion in Natural Gas-Fueled Engines. In: Natural Gas Engines. Energy, Environment, and Sustainability . Springer, pp. 215-250. ISBN 9789811333064

Benghi, Claudio and Greenwood, David (2018) Constraints in Authoring BIM Components. In: Contemporary Strategies and Approaches in 3-D Information Modeling. IGI Global, pp. 27-51. ISBN 9781522556251

Choutri, Kheireddine, Lagha, Mohand, Dala, Laurent and Lipatov, Michael (2018) Quadrotors UAVs Swarming Control Under Leader-Followers Formation. In: 2018 22nd International Conference on System Theory, Control and Computing (ICSTCC). IEEE, pp. 794-799. ISBN 978-1-5386-4445-4

Costa Pereira, Carolina, Mahkamov, Khamid, Kenisarin, Murat, Ismail, Mohammad, Halimic, Elvedin, Mullen, David, Lynn, Kevin and Werner, Thomas (2018) Experimental and Numerical Study on Melting of Solar Salt in a Finned Metallic Container. In: Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition. Volume 6B: Energy. Pittsburgh, Pennsylvania, USA. November 9–15, 2018. American Society of Mechanical Engineers (ASME), New York, IMECE2018-88072. ISBN 9780791852088

Costa Pereira, Carolina, Mahkamov, Khamid, Kenisarin, Murat, Lynn, Kevin, Halimic, Elvedin and Mullen, David (2018) Solar Salt Latent Heat Thermal Storage for a Small Solar Organic Rankine Cycle Plant. In: Proceedings of the ASME 2018 12th International Conference on Energy Sustainability collocated with the ASME 2018 Power Conference and the ASME 2018 Nuclear Forum: Lake Buena Vista, Florida, USA. June 24–28, 2018. American Society of Mechanical Engineers (ASME), New York, ES2018-7326. ISBN 9780791851418

Elmarakbi, Ahmed and Azoti, Wiyao (2018) Mechanical Prediction of Graphene-Based Polymer Nanocomposites for Energy-Efficient and Safe Vehicles. In: Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and their Polymer Composites. Micro and Nano Technologies . Elsevier, pp. 159-177. ISBN 978-0-323-48061-1

Elmarakbi, Ahmed and Azoti, Wiyao (2018) State of the Art on Graphene Lightweighting Nanocomposites for Automotive Applications. In: Experimental Characterization, Predictive Mechanical and Thermal Modeling of Nanostructures and their Polymer Composites. Micro and Nano Technologies . Elsevier, pp. 1-23. ISBN 9780323480611

Getvoldsen, K. S., Butt, Talib E., House, C. and Ferreira, F. (2018) Sustainable Development and Climate Change. In: Handbook of Sustainability Science and Research. Springer, pp. 445-457. ISBN 9783319630069

Ghafar, Maszura Abdul, Ibrahim, Rahinah, Shari, Zalina and Rahimian, Farzad Pour (2018) Integration of BIM Work Culture for Improving Global Project Collaboration Productivity. In: Contemporary Strategies and Approaches in 3-D Information Modeling. IGI Global, pp. 136-157. ISBN 9781522556251

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2018) A Machine Learning Approach For Simulating Ground Penetrating Radar. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, pp. 1-4. ISBN 978-1-5386-5778-2

Hartley, John, Giannopoulos, Antonios and Warren, Craig (2018) A Huygens subgridding approach for efficient modelling of Ground Penetrating Radar using the Finite-Difference Time-Domain method. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, pp. 1-6. ISBN 978-1-5386-5778-2

House, C., Jordan, N. L., Butt, Talib E., Kwan, J. and Alam, A. (2018) Perception Versus Skepticism—An Environmental Communication Issue and Climate Change. In: Handbook of Sustainability Science and Research. World Sustainability Series . Springer, pp. 893-901. ISBN 978-3-319-63006-9

Jowett, Benjamin, Al Hattab, Malak and Kassem, Mohamad (2018) Demystifying Collaboration in BIM-Based Projects Under Design-Build Procurement. In: Contemporary Strategies and Approaches in 3-D Information Modeling. IGI Global, pp. 158-190. ISBN 9781522556251

Li, Jennifer, Greenwood, David and Kassem, Mohamad (2018) Blockchain in the built environment: analysing current applications and developing an emergent framework. In: Creative Construction Conference 2018 - Proceedings: CCC 2018, 30 June - 3 July 2018, Ljubljana, Slovenia. Diamond Congress Ltd., Budapest University of Technology and Economics, Budapest, pp. 59-66. ISBN 9786155270451

Mahkamov, Khamid, Makhkamova, Irina and Kahwash, Fadi (2018) Novel Twin-Screw Stirling Cycle Machine for Cryogenic and Refrigeration Applications. In: ASME 2018 International Mechanical Engineering Congress and Exposition. ASME, IMECE2018-86853. ISBN 978-0-7918-5207-1

Onalaja, Afolabi, Cheung, Wai Ming and Samwinga, Victor (2018) Identifying Infrastructure project uncertainties during project initiation using system thinking. In: Proceedings of the Creative Construction Conference (2018). Diamond Congress Ltd., pp. 417-523.

Richardson, Alan, Valentine, Ross, Abrahams, Max and Nicholson, Dan (2018) Microbial Calcite Induced Precipitation Ground Strengthening with Minimum Cement Content. In: Final Conference of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions. RILEM, pp. 433-444. ISBN 978-2-35158-210-7

Wakeford, J., House, C., Butt, Talib E., Paul, P. and Beal, C. D. (2018) Flood Vulnerability and the Three Dimensions of Sustainability Philosophy: An Innovative Concept Design for Rapid Assessment. In: Handbook of Sustainability Science and Research. World Sustainability Series . Springer, pp. 773-782. ISBN 978-3-319-63006-9

Wang, Cong, Xu, Bin, Terry, Jonathan, Smith, Stewart, Walton, Anthony and Li, Yifan (2018) Metal-Elastomer Surface Deformation Control on Super-Compressible Strain Transducer Arrays. In: IEEE International Flexible Electronics Technology Conference. IEEE, Piscataway. ISBN 9781538633588

van der Kruk, Jan, Liu, T., Mozaffari, Amirpasha, Gueting, N., Klotzsche, Anja, Vereecken, Harry, Warren, Craig and Giannopoulos, Antonios (2018) GPR full-waveform inversion, recent developments, and future opportunities. In: 2018 17th International Conference on Ground Penetrating Radar (GPR). IEEE, p. 8441667. ISBN 978-1-5386-5778-2

Report

Dawson, Susan and Osborne, Allan (2018) Reshaping built environment education: The impact of degree apprenticeships. Project Report. Council of Heads of the Built Environment.

Conference or Workshop Item

Bokor, Orsi, Florez Perez, Laura, Osborne, Allan and Gledson, Barry (2018) A framework for modelling masonry construction using hybrid simulation approaches. In: Creative Construction Conference 2018, 30 June - 3 July 2018, Ljublana.

Chinombo, Maxford, Vichare, Parag and Cheung, Wai Ming (2018) Comparison of Environmental Life Cycle Analysis of Aluminum Alloy (LM 6) Street Light Housing and Aluminum Alloy (AL SI12CU1{FE}) Housing. In: SEEP 2018 - 11th International Conference on Sustainable Energy & Environmental Protection, 8th - 11th May 2018, Paisley, UK.

Davidson, Jordan, Fowler, John, Pantazis, Charalampos, Sannino, Massimo, Walker, Jordan and Rahimian, Farzad Pour (2018) Virtual reality applications in architecture: Bill of quantities & virtual reality. In: Creative Construction Conference 2018, 30th June - 3rd July 2018, Ljublana, Slovenia.

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2018) A Fast GPR Numerical Model Based on Machine Learning with Application to Full Waveform Inversion. In: 24th European Meeting of Environmental and Engineering Geophysics: Near Surface Geoscience Conference & Exhibition 2018, 9-13 September 2018, Porto.

Gledson, Barry, Williams, David and Littlemore, Michelle (2018) Construction Planning Efficiency and Delivery Time Performance: Analysing Failure in Task-Level ‘Hit Rates’. In: ARCOM 2018: 34th Annual Conference - A Productive Relationship: Balancing Fragmentation and Integration, 3rd - 5th September 2018, Belfast, UK.

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Kane, Malal, Edmondson, Vikki, Do, Minh-Tan and Cerezo, Veronique (2018) Effect of road texture characteristics on skid resistance: parametric study viathe DFM. In: 45th Leeds-Lyon Symposium on Tribology – Smart Tribology Systems, 4-7 Sep 2018, Leeds, United Kingdom.

Kassem, Mohamad, Abd Raoff, Nur Liyana and Ouahrani, Djamel (2018) Identifying and Analyzing BIM Specialist Roles using a Competency-based Approach. In: Creative Construction Conference 2018, 30th June - 3rd July 2018, Ljublana, Slovenia.

Klotzsche, Anja, Mozaffari, Amirpasha, Warren, Craig, Liu, Tao, Giannopoulos, Antonios, Vereecken, Harry and Van der Kruk, Jan (2018) Recent developments of GPR full-waveform inversion for experimental data. In: AGU 100 - American Geophysical Union Fall Meeting 2018, 10th - 14th December 2018, Washington, DC.

Mahkamov, Khamid, Pili, Piero, Manca, Roberto, Leroux, Arthur, Mintsa, Andre-Charles, Lynn, Kevin, Mullen, David, Halimic, Elvedin, Bartolini, Carlo, Pirro, Matteo, Costa Pereira, Carolina, Cabeza, Luis F., de Gracia Cuesto, Alvaro, Kenisarin, Murat and Makhkamova, Irina (2018) Development of a small solar thermal power plant for heat and power supply to domestic and small business buildings. In: ASME 2018 Power and Energy Conference, 24th - 28th June 2018, Florida, USA.

Mallory, Adrian, Crapper, Martin and Holm, Rochelle (2018) When faecal sludge reuse doesn’t work: a look at access for the poorest and people with disabilities in urban Malawi. In: 41st WEDC International Conference: Transformation Towards Sustainable and Resilient Wash Services, 9th - 13th July 2018, Nakuru, Kenya.

Masri, Jafar, Dala, Laurent and Huard, Benoit (2018) A Review of the Analytical Methods used for Seaplanes Performance Prediction. In: 6th Aircraft Structural Design Conference, 9-11 October 2018, Bristol.

Mendes, Joao, Gallipoli, Domenico, Toll, David and Tarantino, Alessandro (2018) First Saturation and Resaturation of High Capacity Tensiometers with 1.5 MPa High Air Entry Value (HAEV) Ceramic Filters. In: Second Pan-American Conference on Unsaturated Soils, 12th - 15th November 2017, Dallas, Texas.

Ng, Bobo, Tindall, Jess, Edge, Jerry, Morrell, Joe, Tioh, D., Choi, K., Du, Hu, Wei, Shen, Waggott, A., Barber, A., Keating, M., Walker, Sara and Qian, Zi (2018) Refurbishment options to decarbonise a 1960s public office building by 2050s. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Oliver, Stephen and Rahimian, Farzad Pour (2018) Are computers agents? Considering the implication of classifying computers as occupants on energy consumption and proximity-asutility equipment scheduling. In: Creative Construction Conference 2018, 30th June - 3rd July 2018, Ljublana, Slovenia.

Ponton, Hazel, Osbourne, Allan, Greenwood, David and Thompson, Neill (2018) Understanding the dynamics of construction design team meetings through joint laughter. In: ARCOM 2018: 34th Annual Conference - A Productive Relationship: Balancing Fragmentation and Integration, 3rd - 5th September 2018, Belfast, UK.

Rasul, Shahid, Pugnant, Adrien and Yu, Eileen H. (2018) Electrochemical reduction of C02 at multi-metallic interfaces. In: Symposium on Electrosynthesis of Fuels 5 - 233rd ECS Meeting, 13th - 17th May 2018, Seattle, United States.

Rogage, Kay and Gledson, Barry (2018) Exploring the development of, and initial exposure to, a BIM-enabled collaborative project information management tool. In: 34th Annual ARCOM Conference: A Productive Relationship: Balancing Fragmentation and Integration, 3-5 September 2018, Belfast.

Shyha, Islam, Deary, Michael and Huo, Dehong (2018) An evaluation of dust release when machining nano-structured composite materials. In: The International Conference on Materials Science and Engineering: Recent Advances and Challenges, 11-13 March 2018, Alexandria.

Siahaan, Ropalin, Poologanathan, Keerthan and Mahendran, Mahen (2018) Design of Rivet Fastened Rectangular Hollow Flange Channel Beams Subject to Local Buckling. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018, 7th - 8th November 2018, St Louis, USA.

Sundararajah, Lavan, Mahendran, Mahen and Poologanathan, Keerthan (2018) New Web Crippling Design Rules for Cold-formed Steel Beams. In: Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018, 7th - 8th November 2018, St Louis, USA.

Theron, Jean-Pierre, Dala, Laurent, Wilke, Daniel N. and Barrier, Patrick (2018) Practical Implementation of a Trajectory Planning Algorithm for an Autonomous UAV. In: ICAS 2018 - 31st Congress of the International Council of the Aeronautical Sciences, 9th - 14th September 2018, Belo Horizonte, Brazil.

Wei, Shen, Yong, Junfeng, Ng, Bobo, Tindall, Jess, Lu, Qin and Du, Hu (2018) Occupant Adaptive Behaviour: an Effective Method towards Energy Efficient Buildings. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Yang, Longzhi, Li, Jie, Hackney, Philip, Chao, Fei and Flanagan, Mark (2018) Manual Task Completion Time Estimation for Job Shop Scheduling Using a Fuzzy Inference System. In: iThings - 2017 IEEE International Conference on Internet of Things, 21st - 23rd June 2017, Exeter, UK.

Book

Adebayo, Jimi, Bokor, Orsi, Dereshev, Dmitry, Henriques, Diogo Pereira, Hosseini Biroun, Seyedmehdi, Khalid, Muhammad, Sridhar, Sreepathy, Wir-Konas, Agnieszka, Yesiltepe, Demet and Zied, Eman (2018) Research for a Better Tomorrow: Communicating with and engaging non expert audiences. Northumbria University.

Andrews, Jane, Clark, Robin, Nortcliffe, Anne and Penlington, Roger (2018) 5th Annual Symposium of the United Kingdom & Ireland Engineering Education Research Network: Time for change. Aston University, Birmingham. ISBN 978 1 85449 443 6

Bull, John W. and Zhou, Xiangming (2018) Concrete in Extreme Environments. Whittles Publishing. ISBN 978-184995-327-6

Penlington, Roger and Andrews, Jane (2018) The First Spring Colloquium of the United Kingdom & Ireland Engineering Education Research Network. Northumbria University, Online. ISBN 9781861354792

Thesis

Alafogianni, Maria (2018) An Investigation of Varying Laser Trim Pattern Characteristics on the Performance and Reliability of Discrete Resistive Components. Doctoral thesis, Northumbria University.

Cherianlukose, Cecil (2018) An investigative study of Manganese-based Antiperovskite structures as a thin film resistive material system. Doctoral thesis, Northumbria University.

Elgadi, Osama (2018) Investigation into the Barriers to Six Sigma in Libyan Manufacturing Companies and Development of a Framework for its Implementation. Doctoral thesis, Northumbria University.

Elsharif, Nabil (2018) Solar Water Desalination using Multi-effect Water Stills with Reduced internal Pressure. Doctoral thesis, Northumbria University.

Lopez Rodriguez, Isbelis Coromoto (2018) Mechanical characterisation of protective coatings for offshore wind turbine towers and transition pieces. Doctoral thesis, Northumbria University.

Nguyen, Hoang (2018) Isogeometric Analysis of Small-Scale Plates with Generalised Continua. Doctoral thesis, Northumbria University.

Villapún Puzas, Victor Manuel (2018) Rapidly solidified metallic glass alloys for antibacterial touching surfaces. Doctoral thesis, Northumbria University.

Patent

University of Sunderland, DELTA-TECH S.P.A., NANESA S.R.L. (2018) Method of Forming Graphene Nanoplatelets, Graphene Nanoplatelets So-Obtained and Composites Comprising Said Nanoplatelets. WO/2018/051095.

Sabic Global Technologies B.V. (2018) Fabrication of piezoelectric composites using high temperature dielectrophoresis technique. WO2018029549A1.

Other

Richardson, Alan (2018) The Dome Lives. Robin.