Items where Division is "Faculties > Engineering and Environment > Mechanical and Construction Engineering" and Year is 2023
![]() | Up a level |
Abima, Cynthia Samuel, Madushele, Nkosinathi, Mwema, Fredrick Madaraka and Akinlabi, Stephen (2023) Experimental and finite element simulation for thermal distribution in TIG, MIG and TIG-MIG hybrid welds. International Journal on Interactive Design and Manufacturing (IJIDeM). ISSN 1955-2513 (In Press)
Ahmad, Ahmad Mohammad, Rodriguez-Trejo, Sergio, Hafeez, Mian Atif, Dawood, Nashwan, Kassem, Mohamad and Naji, Khalid (2023) Drivers for energy analysis towards a BIM-enabled information flow. Smart and Sustainable Built Environment, 12 (3). pp. 507-533. ISSN 2046-6099
Ajuka, Luke O., Ogedengbe, Temitayo S., Adeyi, Timothy, Ikumapayi, Omolayo M. and Akinlabi, Esther (2023) Wear characteristics, reduction techniques and its application in automotive parts – A review. Cogent Engineering, 10 (1). p. 2170741. ISSN 2331-1916
Alaba, E. S., Akinlabi, Esther, Kazeem, R. A., Petinrin, A. S., Ikumapayi, M. O. and Jen, T.C. (2023) Evaluation of Palm Kernel Oil as Cutting Lubricant in Turning AISI 1039 Steel Using Taguchi-Grey Relational Analysis Optimization Technique. Advances in Industrial and Manufacturing Engineering, 6. p. 100115. ISSN 2666-9129
Angelis, Dimitrios (2023) Wide angle reflection and refraction methods for ground penetrating radar. Doctoral thesis, Northumbria University.
Antwi-Afari, Maxwell Fordjour, Anwer, Shahnawaz, Umer, Waleed, Mi, Hao-Yang, Yu, Yantao, Moon, Sungkon and Hossain, Md. Uzzal (2023) Machine learning-based identification and classification of physical fatigue levels: A novel method based on a wearable insole device. International Journal of Industrial Ergonomics, 93. p. 103404. ISSN 0169-8141
Arshad, Adeel, Iqrar, Syed Atif, Costa Pereira, Carolina, Shahzad, Muhammad Wakil, Nawaz, Kashif and Worek, William (2023) Cooling performance of an active-passive hybrid composite phase change material (HcPCM) finned heat sink: Constant operating mode. International Journal of Heat and Mass Transfer, 207. p. 123973. ISSN 0017-9310
Ashfaq, Saleha, Tang, Yong and Maqbool, Rashid (2023) Insights of energy and its trade networking impacts on sustainable economic development. Energy, 265. p. 126319. ISSN 0360-5442
Babaremu, Kunle, Oladijo, Oluseyi P. and Akinlabi, Esther (2023) Biopolymers: A suitable REPLACEMENT for plastics in product packaging. Advanced Industrial and Engineering Polymer Research. ISSN 2542-5048 (In Press)
Bi, Xiaoyu, Li, Meichun, Zhou, Guoqiang, Liu, Chaozheng, Huang, Runzhou, Shi, Yang, Xu, Bin, Guo, Zhanhu, Fan, Wei, Algadi, Hassan and Ge, Shengbo (2023) High-performance flexible all-solid-state asymmetric supercapacitors based on binder-free MXene/cellulose nanofiber anode and carbon cloth/polyaniline cathode. Nano Research, 16 (5). pp. 7696-7709. ISSN 1998-0124
Chiponde, Danstan Bwalya (2023) Learning from project-related failures in UK construction project based organisations: an examination of actor approaches, intentions and behaviours. Doctoral thesis, Northumbria University.
Corradi, Marco, Mustafaraj, Enea and Speranzini, Emanuela (2023) Sustainability considerations in remediation, retrofit, and seismic upgrading of historic masonry structures. Environmental Science and Pollution Research, 30 (10). pp. 25274-25286. ISSN 0944-1344
Dang, Hui, Kong, Qianqian, Winchester, William, Wan, Xin, Lei, Yu, Zhang, Haisheng, Zhao, Yu, Liu, Xinyu, Xu, Bin, Zhang, Baoshan and Wang, Zhe (2023) Isolation, Identification and Pathogenic Effects of Trichoderma spp. from Auricularia auricula. Advanced Composites and Hybrid Materials, 6 (3). p. 96. ISSN 2522-0128
Elmasry, Ahmed, Azoti, Wiyao and Elmarakbi, Ahmed (2023) Modelling and design of hierarchical fibre-graphene nanoplatelets reinforced elasto-viscoplastic polymer matrix composites to improve crashworthiness and energy absorption. Composite Structures, 310. p. 116705. ISSN 0263-8223
Eltouby, Pakinam (2023) Synthesis and characterisation of piezoelectric composites for sensing and actuation applications. Doctoral thesis, Northumbria University.
Farokhi, Hamed, Rocha, Rodrigo T., Hajjaj, Amal Z. and Younis, Mohammad I. (2023) Nonlinear damping in micromachined bridge resonators. Nonlinear Dynamics, 111 (3). pp. 2311-2325. ISSN 0924-090X
Feng, Shixuan, Zhai, Futian, Su, Huahua, Sridhar, Deepak, Algadi, Hassan, Xu, Bin, Pashameah, Rami Adel, Alzahrani, Eman, Abo-Dief, Hala M., Ma, Yong, Li, Tingxi and Guo, Zhanhu (2023) Progress of metal organic frameworks-based composites in electromagnetic wave absorption. Materials Today Physics, 30. p. 100950. ISSN 2542-5293
Ge, Yongkai, Ma, Yue, Wang, Qingrui, Yang, Qing, Xing, Lu and Ba, Shusong (2023) Techno-economic-environmental assessment and performance comparison of a building distributed multi-energy system under various operation strategies. Renewable Energy, 204. pp. 685-696. ISSN 0960-1481
Gillani, Syed Abreez, Abbasi, Rabiya, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2023) Comparison of Energy-use Efficiency for Lettuce Plantation under Nutrient Film Technique and Deep-Water Culture Hydroponic Systems. Procedia Computer Science, 217. pp. 11-19. ISSN 1877-0509
Gonzalez Sanchez, Sergio, Sfikas, Athanasios, Kamnis, Spyros, Garay, Carlos, Hurtado-Macias, A. and Martínez-Sánchez, R. (2023) Wear resistant CoCrFeMnNi0.8V High Entropy Alloy with Multi Length-Scale Hierarchical Microstructure. Materials Letters, 331. p. 133504. ISSN 0167-577X
Gonzalez Sanchez, Sergio, Sfikas, Athanasios, Kamnis, Spyros, John, S.E., Nye, Z.W., Spink, M., Allen, C., Martínez-Sánchez, R., Win Naung, Shine, Rahmati, Mohammad, Keil, T., Durst, K. and Lancaster, R.J. (2023) Computational and experimental investigation of the strain rate sensitivity of small punch testing of the high-entropy alloy CoCrFeMnNi. Journal of Alloys and Compounds, 936. p. 168219. ISSN 0925-8388
He, Guanyu, He, Yuxin, Liu, Hu and Guo, Zhanhu (2023) Engineering integrated multimodal sensing and feedback ring system for advanced interactive metaverse platform. Science Bulletin, 68 (2). pp. 133-135. ISSN 2095-9273
Ho, Viet Hung, Ho, Tam and Shin, Won Ho (2023) Auxeticity of monolayer, few-layer, vdW heterostructure and ribbon penta-graphene. Physical Chemistry Chemical Physics, 25 (6). pp. 4258-4541. ISSN 1463-9076
Hou, Chuanxin, Yang, Wenyue, Kimura, Hideo, Xie, Xiubo, Zhang, Xiaoyu, Sun, Xueqin, Yu, Zhipeng, Yang, Xiaoyang, Zhang, Yuping, Wang, Bin, Xu, Bin, Sridhar, Deepak, Algadi, Hassan, Guo, Zhanhu and Du, Wei (2023) Boosted lithium storage performance by local build-in electric field derived by oxygen vacancies in 3D holey N-doped carbon structure decorated with molybdenum dioxide. Journal of Materials Science and Technology, 142. pp. 185-195. ISSN 1005-0302
Ikumapayi, Omolayo M., Afolalu, Sunday A., Ogedengbe, Temitayo S., Kazeem, Rasaq A. and Akinlabi, Esther (2023) Human-Robot Co-working Improvement via Revolutionary Automation and Robotic Technologies – An overview. Procedia Computer Science, 217. pp. 1345-1353. ISSN 1877-0509
Imam, Habiba Zahir, Al-Musaibeli, Hamdan, Zheng, Yufan, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2023) Vision-based spatial damage localization method for autonomous robotic laser cladding repair processes. Robotics and Computer-Integrated Manufacturing, 80. p. 102452. ISSN 0736-5845
Jiang, Xiaona, Chen, Shuai, Zhang, Xinrui, Qu, Lanni, Qi, Houjuan, Wang, Bin, Xu, Bin and Huang, Zhanhua (2023) Carbon-doped flower-like Bi2WO6 decorated carbon nanosphere nanocomposites with enhanced visible light photocatalytic degradation of tetracycline. Advanced Composites and Hybrid Materials, 6 (1). p. 9. ISSN 2522-0128
Kamnis, S., Sfikas, A. K., Gonzalez Sanchez, Sergio, Karantzalis, A. E. and Georgatis, Ε. (2023) A New Cooling-Rate-Dependent Machine Learning Feature for the Design of Thermally Sprayed High-Entropy Alloys. Journal of Thermal Spray Technology, 32 (2-3). pp. 401-414. ISSN 1059-963
Kazeem, Rasaq A., MPetinrin, Moses O., Akhigbe, Peter O., Jen, Tien-Chien, Akinlabi, Esther, Akinlabi, Stephen and Ikumapayi, Omolayo M. (2023) Forecast of the Trend in Sales Data of a Confectionery Baking Industry Using Exponential Smoothing and Moving Average Models. Mathematical Modelling of Engineering Problems, 10 (1). pp. 1-23. ISSN 2369-0739
Lei, Hanhui, Xing, Lei, Jiang, Hai, Wang, Yucheng, Xu, Bin, Xuan, Jin and Liu, Xiaoteng (2023) Designing graded fuel cell electrodes for proton exchange membrane (PEM) fuel cells with recurrent neural network (RNN) approaches. Chemical Engineering Science, 267. p. 118350. ISSN 0009-2509
Li, Chunchun, Meng, Yingzhi, Hou, Hongping, Zhang, Amei, Khaliq, Jibran, Liao, Na, Fu, Caixia, Liu, Laijun and Du, Hongliang (2023) Synthesis, crystal structure, and characterization of Na2SrV4O12: A low‐firing dielectric vanadate. Journal of the American Ceramic Society, 106 (6). pp. 3501-3508. ISSN 0002-7820
Li, Fushan, Li, Qiuyu, Kimura, Hideo, Xie, Xiubo, Zhang, Xiaoyu, Wu, Nannan, Sun, Xueqin, Xu, Bin, Algadi, Hassan, Pashameah, Rami Adel, Alanazi, Abdullah K., Alzahrani, Eman, Li, Haodong, Du, Wei, Guo, Zhanhu and Hou, Chuanxin (2023) Morphology controllable urchin-shaped bimetallic nickel-cobalt oxide/carbon composites with enhanced electromagnetic wave absorption performance. Journal of Materials Science and Technology, 148. pp. 250-259. ISSN 1005-0302
Li, Jennifer J. (2023) A socio-technical framework to guide implementation and value realisation of distributed ledger technologies (dlt) in the construction sector. Doctoral thesis, Northumbria University.
Li, Rong, Chen, Wenge, Zhou, Kai, Yang, Yana, Dong, Longlong, Elmarakbi, Ahmed and Fu, Yong Qing (2023) Deformation and fracture mechanisms of selective laser melted tungsten skeleton reinforced copper matrix composites at varied temperatures. Materials Letters, 332. p. 133550. ISSN 0167-577X
Li, Xue, Ren, Jianning, Sridhar, Deepak, Xu, Bin, Algadi, Hassan, El-Bahy, Zeinhom M., Ma, Yong, Li, Tingxi and Guo, Zhanhu (2023) Progress of layered double hydroxide-based materials for supercapacitors. Materials Chemistry Frontiers, 7 (8). pp. 1520-1561. ISSN 2052-1537
Lian, Mengying, Sun, Jiaxin, Jiang, Dawei, Xu, Miaojun, Wu, Zijian, Xu, Bin, Algadi, Hassan, Huang, Mina and Guo, Zhanhu (2023) Waterwheel-inspired high-performance hybrid electromagnetic-triboelectric nanogenerators based on fluid pipeline energy harvesting for power supply systems and data monitoring. Nanotechnology, 34 (2). 025401. ISSN 0957-4484
Lin, Jing, Li, Jialin, Feng, Shichang, Gu, Caiqin, Li, Huajian, Lu, Hanqing, Hu, Fei, Pan, Duo, Xu, Bin and Guo, Zhanhu (2023) An Active Bacterial Anti-adhesion Strategy Based on Directional Transportation of Bacterial Droplets Driven by Triboelectric Nanogenerators. Nano Research, 16 (1). pp. 1052-1063. ISSN 1998-0124
Maqbool, Rashid and Jowett, Emily (2023) Conserving a sustainable urban environment through energy security and project management practices. Environmental Science and Pollution Research, 30 (34). pp. 81858-81880. ISSN 0944-1344
Maqbool, Rashid, Namaghi, Johnny Rezai, Rashid, Yahya and Altuwaim, Ayman (2023) How modern methods of construction would support to meet the sustainable construction 2025 targets, the answer is still unclear. Ain Shams Engineering Journal, 14 (4). p. 101943. ISSN 2090-4479
Maqbool, Rashid, Saiba, Mohammed Rayan, Altuwaim, Ayman, Rashid, Yahya and Ashfaq, Saleha (2023) The influence of industrial attitudes and behaviours in adopting sustainable construction practices. Sustainable Development, 31 (2). pp. 893-907. ISSN 0968-0802
Maqbool, Rashid, Saiba, Mohammed Rayan and Ashfaq, Saleha (2023) Emerging industry 4.0 and Internet of Things (IoT) technologies in the Ghanaian construction industry: sustainability, implementation challenges, and benefits. Environmental Science and Pollution Research, 30 (13). pp. 37076-37091. ISSN 0944-1344
Mcintosh, Alex (2023) Web crippling design of optimised cold-formed channel beams. Doctoral thesis, Northumbria University.
Monteleone, Maria, Crapper, Martin and Motta, Davide (2023) The discharge of the pipelines supplying public fountains in Roman Pompeii. Journal of Archaeological Science: Reports, 47. p. 103769. ISSN 2352-409X
Mu, Hailiang, Zhuge, Xiangqun, Ren, Guogang, Luo, Kun, Ding, Zhengping, Ren, Yurong, Luo, Zhihong, Bayati, Maryam, Xu, Bin and Liu, Xiaoteng (2023) Dual Functional Mesoporous Silica Colloidal Electrolyte for Lithium-Oxygen Batteries. Chemical Engineering Journal, 455 (Part 2). p. 140761. ISSN 1385-8947
Mu, Yirui, Wang, Lin, Zhang, Rui, Pashameah, Rami Adel, Alzahrani, Eman, Li, Zhengzheng, Alanazi, Abdullah K., Algadi, Hassan, Huang, Mina, Guo, Zhanhu, Wan, Tong and Wei, Huige (2023) Rapid and facile fabrication of hierarchically porous graphene aerogel for oil-water separation and piezoresistive sensing applications. Applied Surface Science, 613. p. 155982. ISSN 0169-4332
Muhamad Ibrahim, Sifan Mohamed (2023) Development and structural applications of ultra high performance and lightweight high strength concrete. Doctoral thesis, Northumbria University.
Musehane, Ndivhuwo M. (2023) Characterisation of thermal boundary layers in acceleration. Doctoral thesis, Northumbria University.
Niu, Yanfei, Li, Xiaohui, Wu, Chunhua, Shi, Zhengjun, Lin, Xu, Helal, Mohamed H., Abu Ali, Ola A., Algadi, Hassan, Xu, Bin and Wang, Zhe (2023) Chemical composition, pharmacodynamic activity of processed Aconitum brachypodum Diels., and molecular docking analysis of its active target. Advanced Composites and Hybrid Materials, 6 (2). p. 75. ISSN 2522-0128
Nueraji, Marat, Toktarbay, Zhexenbek, Ardakkyzy, Aida, Sridhar, Deepak, Algadi, Hassan, Xu, Bin, Althakafy, Jalal T., Alanazi, Abdullah K., Abo-Dief, Hala M., Adilov, Salimgerey and Guo, Zhanhu (2023) Mechanically-robust electrospun nanocomposite fiber membranes for oil and water separation. Environmental Research, 220. p. 115212. ISSN 0013-9351
Ogbonna, Okwudili Simeon, Akinlabi, Stephen, Madushele, Nkosinathi, Fatoba, Olawale Samuel and Akinlabi, Esther (2023) Grey-based taguchi method for multi-weld quality optimization of gas metal arc dissimilar joining of mild steel and 316 stainless steel. Results in Engineering, 17. p. 100963. ISSN 2590-1230
Omotosho, Emmanuel Olubambi (2023) Studies on dynamic behaviours of magnetic shape memory single crystal NiMnGa alloys for actuator applications. Doctoral thesis, Northumbria University.
Onalaja, Afolabi Aderemi (2023) Improving costing in infrastructure projects to accommodate uncertainties. Doctoral thesis, Northumbria University.
Ping, Dan, Yi, Feng, Zhang, Guiwei, Wu, Shide, Fang, Shaoming, Hu, Kailong, Xu, Bin, Ren, Junna and Guo, Zhanhu (2023) NH4Cl-assisted preparation of single Ni sites anchored carbon nanosheet catalysts for highly efficient carbon dioxide electroreduction. Journal of Materials Science and Technology, 142. pp. 1-9. ISSN 1005-0302
Qin, Guoshun, Zhang, Chengguan, Zhang, Shaobin, Chen, Xue and He, Yongjun (2023) Compatibility effect on stress-free two-way memory of Ni-Mn-Ga single crystal. Journal of Alloys and Compounds, 935 (Part 2). p. 168134. ISSN 0925-8388
Qiu, Yang, Li, Gaoyang, Zhou, Huimin, Zhang, Guoliang, Guo, Liang, Guo, Zhanhu, Yang, Ruonan, Fan, Yuqi, Wang, Weiliang, Du, Yong and Dang, Feng (2023) Highly Stable Garnet Fe2Mo3O12 Cathode Boosts the Lithium–Air Battery Performance Featuring a Polyhedral Framework and Cationic Vacancy Concentrated Surface. Advanced Science, 10 (12). p. 2300482. ISSN 2198-3844
Rahman, Mohammad, Ali, Muhammad Ashraf, Chowdhury, Ahmed I. A. and Ravenscroft, Peter (2023) Manganese in groundwater in South Asia needs attention. ACS Environmental Science and Technology Water, 3 (6). pp. 1425-1428. ISSN 2690-0637
Rodríguez-Cabriales, Gustavo, Garay-Reyes, Carlos G., Guía-Tello, Juan C., Medrano-Prieto, Hansel M., Estrada-Guel, Ivanovich, García-Hernández, Lilia J., Ruiz-Esparza-Rodríguez, Marco A., Mendoza-Duarte, José M., García-Aguirre, Karen A., Gonzalez Sanchez, Sergio and Martínez-Sánchez, Roberto (2023) Abrasive Wear Behavior of Al–4Cu–1.5Mg–WC Composites Synthesized through Powder Metallurgy. Lubricants, 11 (3). p. 103. ISSN 2075-4442
Salokhe, Shivam, Rahmati, Mohammad, Masoodi, Ryan and Entwistle, Jane (2023) The Effect of Fibre Swelling on Fluid Flow in Cotton Fabrics: An Experimental Study. Capillarity. ISSN 2709-2119 (In Press)
Setswalo, K., Oladijo, O. P., Namoshe, M., Akinlabi, Esther, Sanjay, R. M., Siengchin, S. and Srisuk, R. (2023) The Water Absorption and Thermal Properties of Green Pterocarpus Angolensis (Mukwa)-Polylactide Composites. Journal of Natural Fibers, 20 (1). pp. 12-29. ISSN 1544-0478
Shahzad, Muhammad Wakil, Ybyraiymkul, Doskhan, Qian, Chen, Burhan, Muhammad, MKumja, M. Kumja, Ng, Kim Choon, Birkett, Martin, Ahmad, Muhammad, Imtiaz, Nida and Xu, Bin (2023) Pressure Driven Adsorption Cycle Integrated with Thermal Desalination. Case Studies in Thermal Engineering, 41. p. 102608. ISSN 2214-157X
Shayanfar, Javad, Barros, Joaquim A. O. and Rezazadeh, Mohammadali (2023) Cross‐sectional and confining system unification on peak compressive strength of FRP confined concrete. Structural Concrete, 24 (1). pp. 1531-1545. ISSN 1464-4177
Shayanfar, Javad, Barros, Joaquim A.O. and Rezazadeh, Mohammadali (2023) Analysis-oriented model for partially FRP-and-steel-confined circular RC columns under compression. Engineering Structures, 276. p. 115330. ISSN 0141-0296
Shayanfar, Javad, Barros, Joaquim A.O. and Rezazadeh, Mohammadali (2023) Stress–strain model for FRP confined heat-damaged concrete columns. Fire Safety Journal, 136. p. 103748. ISSN 0379-7112
Shayanfar, Javad, Kafshgarkolaei, Hassan Jafarian, Barros, Joaquim A.O. and Rezazadeh, Mohammadali (2023) Unified strength model for FRP confined heat-damaged circular and square concrete columns. Composite Structures, 307. p. 116647. ISSN 0263-8223
Shen, Xiang, Avital, Eldad, Ikram, Zaheer, Yang, Liming, Korakianitis, Theodosios and Dala, Laurent (2023) Influence of curvature distribution smoothing on the reduction of aerofoil self-noise. International Journal of Numerical Methods for Heat & Fluid Flow, 33 (4). pp. 1379-1393. ISSN 0961-5539
Sun, Bo, Chen, Wenge, Zhang, Hui, Elmarakbi, Ahmed and Fu, Yong Qing (2023) Li2Si2O5 Nano-brush Coated Carbon Cloth as a Potential Solution for Wastewater Treatment. Separation and Purification Technology, 310. p. 123085. ISSN 1873-3794
Sun, Yongxiu, Shi, Wenwu, Sun, Mengxuan, Fang, Qisheng, Ren, Xiaohe, Yan, Yijun, Gan, Ziwei, Fu, Yong Qing, Elmarakbi, Ahmed, Li, Zhijie and Wang, Zhiguo (2023) Molybdenum Based 2D Conductive Metal–Organic Frameworks as Efficient Single-atom Electrocatalysts for N2 Reduction: A Density Functional Theory Study. International Journal of Hydrogen Energy, 48 (52). pp. 19972-19983. ISSN 0360-3199
Tamayo-Vegas, Maurico Sebastian (2023) Advancing wireless sensing techniques for structural health monitoring of composite materials: an integrated numerical and experimental study in varied operating environments. Doctoral thesis, Northumbria University.
Tamayo-Vegas, Sebastian, Lafdi, Khalid and Elsdon, Michael (2023) A Contactless Characterization of CNT/Epoxy Nanocomposites behavior under acid exposure. Composite Structures, 305. p. 116508. ISSN 0263-8223
Tariq, Rasikh, Ali, Muzaffar, Sheikh, Nadeem Ahmed, Shahzad, Muhammad Wakil and Xu, Bin (2023) Deep learning artificial intelligence framework for sustainable desiccant air conditioning system: Optimization towards reduction in water footprints. International Communications in Heat and Mass Transfer, 140. p. 106538. ISSN 0735-1933
Tavera-Ruiz, C., Martí-Herrero, J., Mendieta, O., Jaimes-Estévez, J., Gauthier-Maradei, P., Azimov, Ulugbek, Escalante, H. and Castro, L. (2023) Current understanding and perspectives on anaerobic digestion in developing countries: Colombia case study. Renewable and Sustainable Energy Reviews, 173. p. 113097. ISSN 1364-0321
Wang, Sichu, Sun, Pengfei, Liu, Junzhuo, Xu, Ying, Dolfing, Jan and Wu, Yonghong (2023) Distribution of methanogenic and methanotrophic consortia at soil-water interfaces in rice paddies across climate zones. iScience, 26 (1). p. 105851. ISSN 2589-0042
Widdowfield Small, Deighton (2023) Development of innovative cold-formed steel joist and composite floor systems. Doctoral thesis, Northumbria University.
Wu, Dong, Zhao, Jue, Su, Yinglong, Yang, Mengjie, Dolfing, Jan, Graham, David W., Yang, Kai and Xie, Bing (2023) Explaining the resistomes in a megacity's water supply catchment: Roles of microbial assembly-dominant taxa, niched environments and pathogenic bacteria. Water Research, 228 (Part A). p. 119359. ISSN 0043-1354
Xu, Shenren, Zhao, Jiazi, Wu, Hangkong, Zhang, Sen, Huang, Huang, Mülle, Jens-Dominik, Rahmati, Mohammad and Wang, Dingxi (2023) A Review of Solution Stabilization Techniques for RANS CFD Solvers. Aerospace, 10 (3). p. 230. ISSN 2226-4310
Yan, Nina, Hu, Biao, Zheng, Zhiyu, Lu, Haiying, Chen, Jingwen, Zhang, Xiaomei, Jiang, Xizhi, Wu, Yonghong, Dolfing, Jan and Xu, Lei (2023) Twice-milled magnetic biochar: A recyclable material for efficient removal of methylene blue from wastewater. Bioresource Technology, 372. p. 128663. ISSN 0960-8524
Yi, Yue, Dolfing, Jan, Jin, Ge, Fang, XiaoYu, Han, WenHao, Liu, LaiYan, Tang, YueQin and Cheng, Lei (2023) Thermodynamic restrictions determine ammonia tolerance of methanogenic pathways in Methanosarcina barkeri. Water Research, 232. p. 119664. ISSN 0043-1354
Yu, Xin, Wu, Zijian, Weng, Ling, Jiang, Dawei, Algadi, Hassan, Qin, Zhuofan, Guo, Zhanhu and Xu, Bin (2023) Flexible strain sensor enabled by carbon nanotubes-decorated electrospun TPU membrane for human motion monitoring. Advanced Materials Interfaces, 10 (11). p. 2202292. ISSN 2196-7350
Zeng, Junling, Xie, Wenhao, Zhou, Heng, Zhao, Tong, Xu, Bin, Jiang, Qinglong, Algadi, Hassan, Zhou, Zhenyu and Gu, Hongbo (2023) Nitrogen-doped graphite-like carbon derived from phthalonitrile resin with controllable negative magnetoresistance and negative permittivity. Advanced Composites and Hybrid Materials, 6 (2). p. 64. ISSN 2522-0128
Zhang, Chengguan, Qin, Guoshun, Zhang, Shaobin, Chen, Sherry and He, Yongjun (2023) Hysteresis effect on austenite-martensite interface in Ni-Mn-Ga single crystal. Scripta Materialia, 222 (1). p. 115029. ISSN 1359-6462
Zhang, Jianxin, Huang, Yao, Cheng, Hengda, Chen, Huanxin, Lu, Xin and He, Yuxuan (2023) Ensemble learning-based approach for residential building heating energy prediction and optimization. Journal of Building Engineering, 67. p. 106051. ISSN 2352-7102
Zhang, Yufei, Zheng, Junjie, Nan, Jiejie, Gai, Chengjie, Shao, Qian, Murugadoss, Vignesh, Maganti, Srihari, Naik, Nithesh, Algadi, Hassan, Huang, Mina, Xu, Bin and Guo, Zhanhu (2023) Influence of mass ratio and calcination temperature on physical and photoelectrochemical properties of ZnFe-layered double oxide/cobalt oxide heterojunction semiconductor for dye degradation applications. Particuology, 74. pp. 141-155. ISSN 1674-2001
Zhao, Jianfeng, Thurairajah, Niraj, Greenwood, David, Liu, Henry and Yuan, Jingfeng (2023) Unpacking the context of Value for Money assessment in global markets: a procurement option framework for Public Private Partnerships. Engineering, Construction and Architectural Management, 30 (8). pp. 3583-3601. ISSN 0969-9988
Zia, Abdul Wasy, Anestopoulos, Ioannis, Panayiotidis, Mihalis I. and Birkett, Martin (2023) Soft diamond-like carbon coatings with superior biocompatibility for medical applications. Ceramics International, 49 (11). pp. 17203-17211. ISSN 0272-8842
Zulu, Sambo Lyson, Saad, Ali M. and Gledson, Barry (2023) Individual Characteristics as Enablers of Construction Employees’ Digital Literacy: An Exploration of Leaders’ Opinions. Sustainability, 15 (2). p. 1531. ISSN 2071-1050