Items where Subject is "H900 Others in Engineering"

Article

Abbasi, Rabiya, Martinez Rodriguez, Pablo and Ahmad, Rafiq (2021) An ontology model to support the automated design of aquaponic grow beds. Procedia CIRP, 100. pp. 55-60. ISSN 2212-8271

Abdulla, Kurdo F., Cunningham, Lee S. and Gillie, Martin (2017) Simulating masonry wall behaviour using a simplified micro-model approach. Engineering Structures, 151. pp. 349-365. ISSN 0141-0296

Agrawal, Prashant, Wells, Gary, Ledesma Aguilar, Rodrigo, McHale, Glen, Buchoux, Anthony, Stokes, Adam and Sefiane, Khellil (2019) Leidenfrost heat engine: Sustained rotation of levitating rotors on turbine-inspired substrates. Applied Energy, 240. pp. 399-408. ISSN 0306-2619

Ahmad, Iftikhar, Islam, Mohammad, Alharthi, Nabeel, Alawadhi, Hussain, Subhani, Tayyab, Munir, Khurram, Shah, Syed Ismat, Inam, Fawad and Zhu, Yanqiu (2018) Chemical and structural analyses of the graphene nanosheet/alumina ceramic interfacial region in rapidly consolidated ceramic nanocomposites. Journal of Composite Materials, 52 (3). pp. 417-428. ISSN 0021-9983

Al Hamd, Rwayda Kh S., Gillie, Martin, Warren, Holly, Torelli, Giacomo, Stratford, Tim and Wang, Yong (2018) The effect of load-induced thermal strain on flat slab behaviour at elevated temperatures. Fire Safety Journal, 97. pp. 12-18. ISSN 0379-7112

Al-Hamd, Rwayda Kh. S., Gillie, Martin, Mohamad, Safaa Adnan and Cunningham, Lee S. (2020) Influence of loading ratio on flat slab connections at elevated temperature: A numerical study. Frontiers of Structural and Civil Engineering, 14 (3). pp. 664-674. ISSN 2095-2430

Al-Nabulsi, Z., Mottram, J.T., Gillie, Martin, Kourra, N. and Williams, M.A. (2021) Mechanical and X ray computed tomography characterisation of a WAAM 3D printed steel plate for structural engineering applications. Construction and Building Materials, 274. p. 121700. ISSN 0950-0618

Alam, Asifa, Chaudhry, Muhammad Nawaz, Mahmood, Adeel, Ahmad, Sajid Rashid and Butt, Talib E. (2021) Development & application of Conceptual Framework Model (CFM) for environmental risk assessment of contaminated lands. Saudi Journal of Biological Sciences, 28 (11). pp. 6167-6177. ISSN 1319-562X

Allen, N. J., Wood, David, Rosamond, Mark and Sims-Williams, D. B. (2009) Fabrication of an in-plane SU-8 cantilever with integrated strain gauge for wall shear stress measurements in fluid flows. Procedia Chemistry, 1 (1). pp. 923-926. ISSN 1876-6196

Allwood, Julian, Childs, Tom, Clare, Adam, De Silva, Anjali, Dhokia, Vimal, Hutchings, Ian, Leach, Richard, Leal-Ayala, David, Lowth, Stewart, Majewski, Candice, Marzano, Adelaide, Mehnen, Jörn, Nassehi, Aydin, Ozturk, Erdem, Raffles, Mark, Roy, Raj, Shyha, Islam and Turner, Sam (2016) Manufacturing at double the speed. Journal of Materials Processing Technology, 229. pp. 729-757. ISSN 0924-0136

Altaee, Mohammed, Cunningham, Lee S. and Gillie, Martin (2017) Experimental investigation of CFRP-strengthened steel beams with web openings. Journal of Constructional Steel Research, 138. pp. 750-760. ISSN 0143-974X

Alwan, Zaid, Greenwood, David and Gledson, Barry (2015) Rapid LEED evaluation performed with BIM based sustainability analysis on a virtual construction. Construction Innovation Information, Process, Management, 15 (2). pp. 134-150. ISSN 1471-4175

Atif, Rasheed and Inam, Fawad (2016) Modeling and simulation of graphene based polymer nanocomposites: advances in the last decade. Graphene, 5 (2). pp. 96-142. ISSN 2169-3471

Atif, Rasheed and Inam, Fawad (2016) The dissimilarities between graphene and frame-like structures. Graphene, 5 (2). pp. 55-72. ISSN 2169-3471

Atif, Rasheed, Shyha, Islam and Inam, Fawad (2017) Modeling and experimentation of multi-layered nanostructured graphene-epoxy nanocomposites for enhanced thermal and mechanical properties. Journal of Composite Materials, 51 (2). pp. 209-220. ISSN 0021-9983

Azimov, Ulugbek, Kawahara, Nobuyuki and Tomita, Eiji (2016) Quantum cascade laser assisted time-resolved measurements of carbon dioxide absorption during combustion in DME-HCCI engine. Fuel, 182. pp. 807-815. ISSN 0016 2361

Babu, P., Ramakrishna Reddy, Kotte and Miles, Robert (2011) Precursor concentration effect on the properties of ZnInSE4 layers grown by chemical bath deposition. Energy Procedia, 10. pp. 177-181. ISSN 1876-6102

Bai, Libing, Gao, Bin, Tian, Shulin, Cheng, Yuhua, Chen, Yifan, Tian, Gui Yun and Woo, Wai Lok (2013) A comparative study of principal component analysis and independent component analysis in eddy current pulsed thermography data processing. Review of Scientific Instruments, 84 (10). p. 104901. ISSN 0034-6748

Balaji, P. S., Moussa, Leblouba, Rahman, Muhammad and Ho, Lau Hieng (2016) An analytical study on the static vertical stiffness of wire rope isolators. Journal of Mechanical Science and Technology, 30 (1). pp. 287-295. ISSN 1738-494X

Balaji, P.S., Moussa, Leblouba, Khandoker, Noman, Shyh, Ting Yuk, Rahman, Muhammad and Ho, Lau Hieng (2017) Experimental study on vertical static stiffnesses of polycal wire rope isolators. IoP Conference Series, Materials Science and Engineering, 217. 012032. ISSN 1757-8981

Balaji, Palani S., Leblouba, Moussa, Rahman, Muhammad and Ho, Lau Hieng (2016) Static lateral stiffness of wire rope isolators. Mechanics Based Design of Structures and Machines, 44 (4). pp. 462-475. ISSN 1539-7734

Bandyopadhyay, Sankhyabrata, Shao, Liyang, Wang, Chao, Liu, Shuaiqi, Wu, Qiang, Gu, Guoqiang, Hu, Jie, Liu, Yanjun, Chen, Xiaolong, Song, Zhangqi, Song, Xuefeng, Bao, Qiaoliang and Smietana, Mateusz (2020) Study on optimization of nano-coatings for ultra-sensitive biosensors based on long-period fiber grating. Sensing and Bio-Sensing Research, 27. p. 100320. ISSN 2214-1804

Baziar, Aliasghar, Akbarizadeh, Mohammad Reza, Hajizadeh, Amin, Marzband, Mousa and Bo, Rui (2020) A Robust Integrated Approach for Optimal Management of Power Networks Encompassing Wind Power Plants. IEEE Transactions on Industry Applications. ISSN 0093-9994 (In Press)

Beheshti, Novid, Burluka, Alexey and Fairweather, Michael (2007) Assessment of Σ−Y liq model predictions for air-assisted atomisation. Theoretical and Computational Fluid Dynamics, 21 (5). pp. 381-397. ISSN 0935-4964

Bentley, Edward, Putrus, Ghanim, McDonald, Stephen and Minns, Peter (2010) Power quality disturbance source identification using self-organising maps. IET Generation, Transmission & Distribution, 4 (10). pp. 1188-1196. ISSN 1751-8687

Bhinder, Majid A., Rahmati, Mohammad, Mingham, C.G. and Aggidis, G. A. (2015) Numerical hydrodynamic modelling of a pitching wave energy converter. European Journal of Computational Mechanics, 24 (4). pp. 129-143. ISSN 1779-7179

Binici, Hanifi, Binici, Fatih, Akcan, Mehmet, Yardim, Yavuz, Mustafaraj, Enea and Corradi, Marco (2020) Physical–Mechanical and Mineralogical Properties of Fired Bricks of the Archaeological Site of Harran, Turkey. Heritage, 3 (3). pp. 1018-1034. ISSN 2571-9408

Boutat, Driss, Benali, Abderraouf, Hammouri, Hassan and Busawon, Krishna (2009) New algorithm for observer error linearization with a diffeomorphism on the outputs. Automatica, 45 (10). pp. 2187-2193. ISSN 0005-1098

Bowden, Michael, Gardiner, Derek, Wood, David, Burdess, James, Harris, Alun and Hedley, John (2000) Raman and finite-element analysis of a mechanically strained silicon microstructure. Journal of Micromechanics and Microengineering, 11 (1). pp. 7-12. ISSN 0960-1317

Bradshaw, Michael, Devine-Wright, Patrick, Evensen, Darrick, King, Owen, Martin, Abigail, Ryder, Stacia, Short, Damien, Sovacool, Benjamin K., Stretesky, Paul, Szolucha, Anna and Williams, Laurence (2022) ‘We're going all out for shale:’ explaining shale gas energy policy failure in the United Kingdom. Energy Policy, 168. p. 113132. ISSN 0301-4215

Brooks, David H., Winebarger, Amy R., Savage, Sabrina, Warren, Harry P., De Pontieu, Bart, Peter, Hardi, Cirtain, Jonathan W., Golub, Leon, Kobayashi, Ken, McIntosh, Scott W., McKenzie, David, Morton, Richard, Rachmeler, Laurel, Testa, Paola, Tiwari, Sanjiv and Walsh, Robert (2020) The Drivers of Active Region Outflows into the Slow Solar Wind. The Astrophysical Journal, 894 (2). p. 144. ISSN 1538-4357

Bruno, Agostino Walter, Gallipoli, Domenico and Mendes, Joao (2022) Hydromechanical behaviour of two unsaturated silts: laboratory data and model predictions. Canadian Geotechnical Journal, 59 (6). pp. 837-846. ISSN 0008-3674

Busby, Michael, Green, David and Combrinck, Madeleine (2022) A Computational Fluid Dynamic investigation of a Data Centre employing Rear Door Heat Exchangers. Journal of Engineering Technology and Applied Sciences, 7 (1). pp. 1-30. ISSN 2548-0391

Butt, Talib E., Akram, Hina, Mahammedi, Charfeldine and House, Christopher (2020) Conceptual site model: an intermediary between baseline study and risk assessment. WIT Transactions on Engineering Sciences, 1. pp. 101-108. ISSN 1743-3533

Butt, Talib E., Clark, M., Coulon, F. and Oduyemi, K. O. K. (2009) A review of literature and computer models on exposure assessment. Environmental Technology, 30 (14). pp. 1487-1501. ISSN 0959-3330

Butt, Talib E., Davidson, Henry A. and Oduyemi, Kehinde O. K. (2008) Hazard assessment of waste disposal sites. Part 1: literature review. International Journal of Risk Assessment and Management, 10 (1/2). pp. 88-108. ISSN 1466-8297

Butt, Talib E., Davidson, Henry A. and Oduyemi, Kehinde O. K. (2008) Hazard assessment of waste disposal sites. Part 2: a holistic approach for landfill leachates. International Journal of Risk Assessment and Management, 10 (1/2). pp. 109-129. ISSN 1466-8297

Butt, Talib E., Gouda, H. M., Baloch, M. I., Paul, P., Javadi, A. A. and Alam, A. (2014) Literature review of baseline study for risk analysis — The landfill leachate case. Environment International, 63. pp. 149-162. ISSN 0160-4120

Butt, Talib E., Lockley, Elaine and Oduyemi, Kehinde O.K. (2008) Risk assessment of landfill disposal sites – State of the art. Waste Management, 28 (6). pp. 952-964. ISSN 0956-053X

Butt, Talib E., Mair, Nigel and Oduyemi, Kehinde O. K. (2006) Hazard Identification and Categorization for Waste Disposal Sites: Part 1 – an Integrated Approach Lacks. Risk Management, 8 (2). pp. 133-148. ISSN 1460-3799

Butt, Talib E., Mair, Nigel and Oduyemi, Kehinde O. K. (2006) Hazard Identification and Categorization for Waste Disposal Sites: Part 2 – A Computer-Aided Procedure. Risk Management, 8 (3). pp. 206-220. ISSN 1460-3799

Butt, Talib E. and Oduyemi, K. O. K. (2003) A holistic approach to Concentration Assessment of hazards in the risk assessment of landfill leachate. Environment International, 28 (7). pp. 597-608. ISSN 0160-4120

Cao, Yunyi, Jana, Saikat, Tan, Xiaolong, Bowen, Leon, Zhu, Yufeng, Dawson, Jack, Han, Rui, Exton, John, Liu, Hongzhong, McHale, Glen, Jakubovics, Nicholas S. and Chen, Jinju (2020) Antiwetting and Antifouling Performances of Different Lubricant-Infused Slippery Surfaces. Langmuir, 36 (45). pp. 13396-13407. ISSN 0743-7463

Chen, HaoJie, Ding, Guofu, Zhang, Jian and Qin, Sheng-feng (2019) Research on priority rules for the stochastic resource constrained multi-project scheduling problem with new project arrival. Computers & Industrial Engineering, 137. p. 106060. ISSN 0360-8352

Chen, Mingming, Blacklock, Matthew, Zhang, Daxu and Gong, Jinghai (2017) Effects of stochastic tow waviness on stiffness and strength of plain-weave ceramic matrix composites. Advances in Mechanical Engineering, 9 (8). p. 168781401772797. ISSN 1687-8140

Chen, Xue and Meguid, S. A. (2015) Asymmetric Bifurcation of Initially Curved Nanobeam. Journal of Applied Mechanics, 82 (9). 091003. ISSN 0021-8936

Chen, Ya, Lin, Jing, Mersal, Gaber A.M., Zuo, Jianliang, Li, Jialin, Wang, Qiying, Feng, Yuhong, Liu, Jianwei, Liu, Zili, Wang, Bin, Xu, Bin and Guo, Zhanhu (2022) “Several birds with one stone” strategy of pH/thermoresponsive flame-retardant/photothermal bactericidal oil-absorbing material for recovering complex spilled oil. Journal of Materials Science and Technology, 128. pp. 82-97. ISSN 1005-0302

Chen, Yan, Feng, Huijuan, Ma, Jiayao, Peng, Rui and You, Zhong (2016) Symmetric waterbomb origami. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 472 (2190). p. 20150846. ISSN 1364-5021

Chen, Zhe, Zhou, Jian, Tang, Hao, Liu, Yi, Shen, Yiping, Yin, Xiaobo, Zheng, Jiangpo, Zhang, Hongshuai, Wu, Jianhui, Shi, Xianglong, Chen, Yiqin, Fu, Richard and Duan, Huigao (2020) Ultrahigh-Frequency Surface Acoustic Wave Sensors with Giant Mass-Loading Effects on Electrodes. ACS Sensors, 5 (6). pp. 1657-1664. ISSN 2379-3694

Cheung, Wai Ming (2022) A Cradle-to-Deposition Life Cycle Assessment of Emerging Photovoltaic Materials. International Journal of Energy, Environment and Economics, 28 (2). pp. 69-86. ISSN 1054-853X

Cheung, Wai Ming (2022) A scenario-based approach to predict energy demand and carbon emission of electric vehicles on the electric grid. Environmental Science and Pollution Research, 29 (51). pp. 77300-77310. ISSN 0944-1344

Chiew, Kevin and Shaowen, Qin (2009) Scheduling and routing of AMOs in an intelligent transport system. IEEE Transactions on Intelligent Transportation Systems, 10 (3). pp. 547-552. ISSN 1524-9050

Chillè, Chiara, Sala, Fernando, Wu, Qiang and Theodorakopoulos, Charis (2020) A study on the heat distribution and oxidative modification of aged dammar films upon Er:YAG laser irradiation. Journal of the Institute of Conservation, 43 (1). pp. 59-78. ISSN 1945-5224

Clayton, Andrew, Irvine, Stuart, Barrioz, Vincent, Brooks, William, Zoppi, Guillaume, Forbes, Ian, Rogers, Keith, Lane, David, Hutchings, Kyle and Roncallo, Scilla (2011) Metal-organic chemical vapor deposition of ultra-thin photovoltaic devices using a pyrite based p–i–n structure. Thin Solid Films, 519 (21). pp. 7360-7363. ISSN 0040-6090

Combrinck, Madeleine, Gadal, Thibault, Hargreaves, Alistair and Martin, James (2022) Velocity tracking of shaped charge wire formation and propagation toward the target. Journal of Energetic Materials. ISSN 0737-0652 (In Press)

Comodi, Gabriele, Cioccolanti, Luca, Mahkamov, Khamid, Penlington, Roger, Lapuerta, Magin, Hernandez, Juan José, Silva Lora, Electo Eduardo, Venturini, Osvaldo, Melian Cobas, Vladimir Rafael, Escobar Palacio, Jose Carlos, Mendonça Freires, Francisco Gaudêncio, Torres, Ednildo Andrade, da Silva, Julio Augusto Mendes, Kafarov, Viatcheslav, Chacon Velasco, Jorge Luis, Solano Martinez, Javier Enrique, Lizarazo Salcedo, Gladys Yolanda, Serna Suárez, Iván David, Jaen, Rene Lesme, Gonzalez, Josue Imbert, Fernandez, Maria, Garcia Faure, Luis Jerónimo, Oliva-Merencio, Deny, Reyes, Ileana Pereda, Salas, Joel Morales and Ramírez, Cesar Cisneros (2019) Analysis of labour market needs for engineers with enhanced knowledge in renewable energy in some European and Latin-American Countries. Energy Procedia, 158. pp. 1135-1140. ISSN 1876-6102

Coxon, John, Fear, Robert C., Reidy, Jade A., Fryer, Laura J. and Plank, James (2021) Hot Plasma in the Magnetotail Lobes Shows Characteristics Consistent With Closed Field Lines Trapped in the Lobes. Journal of Geophysical Research: Space Physics, 126 (9). e2021JA029516. ISSN 2169-9380

Crumey, Andrew (2016) Astronomical expense [Book review]. Literary Review (443). ISSN 0144-4360

Cummings, Charles, Frith, Paul, Zoppi, Guillaume, Forbes, Ian, Rogers, Keith, Lane, David and Marken, Frank (2011) Rocking disc electro-deposition of copper films on Mo/MoSe2 substrates. Thin Solid Films, 519 (21). pp. 7458-7463. ISSN 0040-6090

Cummings, Charles, Zoppi, Guillaume, Forbes, Ian, Colombara, Diego, Peter, Laurence and Marken, Frank (2012) Rocking disc electro-deposition of CuIn alloys, selenisation and pinhole effect minimisation in CISe solar absorber layers. Electrochimica Acta, 79. pp. 141-147. ISSN 0013-4686

Cunningham, James, Lehmann, Erik E., Menter, Matthias and Seitz, Nikolaus (2019) The impact of university focused technology transfer policies on regional innovation and entrepreneurship. The Journal of Technology Transfer, 44 (5). pp. 1451-1475. ISSN 0892-9912

Dade-Robertson, Martyn, Keren-Paz, Alona, Zhang, Meng and Kolodkin-Gal, Ilana (2017) Architects of nature: growing buildings with bacterial biofilms. Microbial Biotechnology, 10 (5). pp. 1157-1163. ISSN 1751-7915

Dade-Robertson, Martyn, Ramirez-Figueroa, Carolina and Zhang, Meng (2014) Radical Vernacular: Bacterial Architecture on Mars. Journal of the British Interplanetary Society, 67 (7). pp. 346-353. ISSN 0007-084X

Danaher, Sean, Datta, Psantu, Hackney, Philip and Waddle, I. (2004) Erosion modelling using Bayesian regulated artificial neural networks. Wear, 256 (9-10). pp. 879-888. ISSN 0043-1648

Daunton, Rachael, Gallant, Andrew, Wood, David and Kataky, Ritu (2011) A thermally actuated microgripper as an electrochemical sensor with the ability to manipulate single cells. Chemical Communications, 47 (22). pp. 6446-6448. ISSN 1359-7345

Demirkiran, Aytac, Karakuzu, Agah, Erkol, Hakan, Torun, Hamdi and Unlu, Mehmet (2018) Analysis of microcantilevers excited by pulsed-laser-induced photoacoustic waves. Optics Express, 26 (4). pp. 4906-4919. ISSN 1094-4087

Dodangoda, Maneesha Tharindi, Mahendran, Mahen, Poologanathan, Keerthan and Frost, Ray L. (2019) Developing a performance factor for fire rated boards used in LSF wall systems. Fire Safety Journal, 109. p. 102872. ISSN 0379-7112

Dong, Hua, Qin, Sheng-feng and Wang, Bin (2013) Editorial. International Journal of Mechanical Engineering Education, 41 (4). p. 281. ISSN 0306-4190

Edmondson, Vikki, Ardill, Owen, Martin, James, Lim, Michael, Kane, Malal and Woodward, John (2022) Quantifying long-term rates of texture change on road networks. International Journal of Pavement Engineering, 23 (6). pp. 1957-1969. ISSN 1029-8436

Eldeeb, Hossien B., Eso, Elizabeth, Jarchlo, Elnaz Alizadeh, Zvanovec, Stanislav, Uysal, Murat, Ghassemlooy, Fary and Sathian, Juna (2021) Vehicular VLC: A Ray Tracing Study Based on Measured Radiation Patterns of Commercial Taillights. IEEE Photonics Technology Letters, 33 (16). pp. 904-907. ISSN 1041-1135

Elkady, Mustafa, Elmarakbi, Ahmed, MacIntyre, John and Al Hariri, Mohammad (2017) Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems. Journal of Traffic and Transportation Engineering (English Edition), 4 (1). pp. 41-60. ISSN 2095-7564

Elmadih, W., Chronopoulos, D., Syam, W. P., Maskery, I., Meng, Han and Leach, R. K. (2019) Three-dimensional resonating metamaterials for low-frequency vibration attenuation. Scientific Reports, 9 (1). ISSN 2045-2322

Emembolu, Itoro, Padwick, Annie, Shimwell, Joe, Sanderson, Jonathan, Davenport, Carol and Strachan, Becky (2020) Using action research to design and evaluate sustained and inclusive engagement to improve children’s knowledge and perception of STEM careers. International Journal of Science Education, 42 (5). pp. 764-782. ISSN 0950-0693

Emhemad, Haitam, Agnew, Brian and Greenwood, David (2014) Sustainability as a Criterion in the Reconstruction of Libya’s Public Transport Infrastructure. International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering, 8 (7). pp. 2315-2319. ISSN 1307-6892

Emran, Mohammed Y., Shenashen, Mohamed A., El-Safty, Sherif A., Selim, Mahmoud M., Minowa, Takashi and Elmarakbi, Ahmed (2020) Three-Dimensional Circular Surface Curvature of a Spherule-Based Electrode for Selective Signaling and Dynamic Mobility of Norepinephrine in Living Cells. ACS Applied Bio Materials, 3 (12). pp. 8496-8506. ISSN 2576-6422

Erfanian Nakhchi Toosi, Mahdi and Esfahani, J.A. (2020) CFD approach for two-phase CuO nanofluid flow through heat exchangers enhanced by double perforated louvered strip insert. Powder Technology, 367. pp. 877-888. ISSN 0032-5910

Fabro, Adriano T., Meng, Han and Chronopoulos, Dimitrios (2020) Uncertainties in the attenuation performance of a multi-frequency metastructure from additive manufacturing. Mechanical Systems and Signal Processing, 138. p. 106557. ISSN 0888-3270

Fan, Yafei, Zhuang, Changfu, Li, Shangjing, Wang, Ying, Zou, Xiaoqin, Liu, Xiaoteng, Huang, Weimin and Zhu, Guangshan (2021) Efficient single-atom Ni for catalytic transfer hydrogenation of furfural to furfuryl alcohol. Journal of Materials Chemistry A, 9 (2). pp. 1110-1118. ISSN 2050-7488

Fang, Libin, Li, Haosheng, Xu, Bin, Ma, Jie, Pan, Hongge, He, Qinggang, Zheng, Tianlong, Ni, Wenbin, Lin, Yue, Li, Yangmu, Cao, Yue, Sun, Chengjun, Yan, Mi, Sun, Wenping and Jiang, Yinzhu (2022) Latticed-Confined Conversion Chemistry of Battery Electrode. Small, 18 (48). p. 2204912. ISSN 1613-6810

Farajpour, Ali, Farokhi, Hamed and Ghayesh, Mergen (2019) A nonlinear viscoelastic model for NSGT nanotubes conveying fluid incorporating slip boundary conditions. Journal of Vibration and Control, 25 (12). pp. 1883-1894. ISSN 1077-5463

Farrag, Mohamed and Putrus, Ghanim (2012) Design of an Adaptive Neurofuzzy Inference Control System for the Unified Power-Flow Controller. IEEE Transactions on Power Delivery, 27 (1). pp. 53-61. ISSN 0885-8977

Feng, Huijuan, Chen, Yan, Dai, Jian S. and Gogu, Grigore (2017) Kinematic study of the general plane-symmetric Bricard linkage and its bifurcation variations. Mechanism and Machine Theory, 116. pp. 89-104. ISSN 0094-114X

Feng, Huijuan, Ma, Jiayao, Chen, Yan and You, Zhong (2018) Twist of Tubular Mechanical Metamaterials Based on Waterbomb Origami. Scientific Reports, 8 (1). ISSN 2045-2322

Feng, Huijuan, Peng, Rui, Ma, Jiayao and Chen, Yan (2018) Rigid Foldability of Generalized Triangle Twist Origami Pattern and Its Derived 6R Linkages. Journal of Mechanisms and Robotics, 10 (5). ISSN 1942-4302

Feng, Huijuan, Peng, Rui, Zang, Shixi, Ma, Jiayao and Chen, Yan (2020) Rigid foldability and mountain-valley crease assignments of square-twist origami pattern. Mechanism and Machine Theory, 152. p. 103947. ISSN 0094-114X

Field, Robert and Wu, Jun Jie (2022) Permeate Flux in Ultrafiltration Processes—Understandings and Misunderstandings. Membranes, 12 (2). p. 187. ISSN 2077-0375

Fong, Joshua, Edge, Jerry, Underwood, Chris, Tindale, Andy and Potter, Steve (2015) Performance of a dynamic distributed element heat emitter model embedded into a third order lumped parameter building model. Applied Thermal Engineering, 80. pp. 279-287. ISSN 1359-4311

Fryer, L. J., Fear, R. C., Coxon, John and Gingell, I. L. (2021) Observations of Closed Magnetic Flux Embedded in the Lobes During Periods of Northward IMF. Journal of Geophysical Research: Space Physics, 126 (6). e2021JA029281. ISSN 2169-9380

Gallant, Andrew, Kaliteevski, Mikhail, Wood, David, Petty, Michael, Abram, Richard, Brand, Stuart, Swift, G. Peter, Zeze, Dagou and Chamberlain, J. Martyn (2007) Passband filters for terahertz radiation based on dual metallic photonic structures. Applied Physics Letters, 91 (16). p. 161115. ISSN 0003-6951

Gallant, Andrew, Swift, G. Peter, Dai, De Chang, Kaliteevski, Mikhail, Zeze, Dagou, Wood, David, Petty, Michael, Brand, Stuart, Abram, Richard and Chamberlain, J. Martyn (2007) Micromachining for Terahertz Artificial Materials. MRS Proceedings, 1016. 1016-CC05. ISSN 1946-4274

Gallipoli, Domenico, Bruno, Agostino Walter, Perlot, Céline and Mendes, Joao (2017) A geotechnical perspective of raw earth building. Acta Geotechnica, 12 (3). pp. 463-478. ISSN 1861-1125

Gao, Bin, Woo, Wai Lok, He, Yunze and Tian, Gui Yun (2016) Unsupervised Sparse Pattern Diagnostic of Defects With Inductive Thermography Imaging System. IEEE Transactions on Industrial Informatics, 12 (1). pp. 371-383. ISSN 1551-3203

Gao, Zhiwei and Ding, Steven X. (2008) Fault reconstruction for Lipschitz nonlinear descriptor systems via linear matrix inequality approach. Circuits, Systems & Signal Processing, 27 (3). pp. 295-308. ISSN 0278-081X

Gao, Zhiwei, Liu, Xiaoxu and Chen, Michael (2016) Unknown Input Observer Based Robust Fault Estimation for Systems Corrupted by Partially-Decoupled Disturbances. IEEE Transactions on Industrial Electronics, 63 (4). pp. 2537-2547. ISSN 0278-0046

Gariani, Salah, Shyha, Islam, Inam, Fawad and Huo, Dehong (2017) Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences, 7 (6). p. 560. ISSN 2076-3417

Gazi, Boran and Ghassemlooy, Zabih (2007) Dynamic buffer management using per-queue thresholds. International Journal of Communication Systems, 20 (5). pp. 571-587. ISSN 1074-5351

Ghassemlooy, Zabih, Popoola, Wasiu Oyewole, Ahmadi, Vahid and Leitgeb, Erich (2009) MIMO free-space optical communication employing subcarrier intensity modulation in atmospheric turbulence channels. Communications Infrastructure: Systems and Applications in Europe (First International ICST Conference, EuropeComm 2009), 16 (2). pp. 61-73. ISSN 1867-8211

Ghassemlooy, Zabih and Rajbhandari, Sujan (2009) Convolutional coded dual header pulse interval modulation for line of sight photonic wireless links. IET Optoelectronics, 3 (3). pp. 142-148. ISSN 1751-8768

Ghassemlooy, Zabih, Tang, Xuan and Rajbhandari, Sujan (2012) Experimental investigation of polarization modulated free space optical communication with direct detection in a turbulence channel. IET Communications, 6 (11). pp. 1489-1494. ISSN 1751-8628

Ghayesh, Mergen and Farokhi, Hamed (2019) Nonsymmetric nonlinear dynamics of piezoelectrically actuated beams. Journal of Vibration and Acoustics, 141 (5). 051012. ISSN 1048-9002

Ghosh, Subarto Kumar, Roy, Tushar Kanti, Pramanik, Md Abu Hanif, Sarkar, Ajay Krishno and Mahmud, Md Apel (2020) An Energy Management System-Based Control Strategy for DC Microgrids with Dual Energy Storage Systems. Energies, 13 (11). p. 2992. ISSN 1996-1073

Ghosh, Subarto Kumar, Roy, Tushar Kanti, Pramanik, Md. Abu Hanif and Mahmud, Md Apel (2021) Design of Nonlinear Backstepping Double-Integral Sliding Mode Controllers to Stabilize the DC-Bus Voltage for DC–DC Converters Feeding CPLs. Energies, 14 (20). p. 6753. ISSN 1996-1073

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2019) Realistic FDTD GPR antenna models optimized using a novel linear/nonlinear Full-Waveform Inversion. IEEE Transactions on Geoscience and Remote Sensing, 57 (3). pp. 1768-1778. ISSN 0196-2892

Gillie, Martin, Dahli, Ranim, Saunders, Fiona C and Gibson, Andrew (2017) Use of rich-media resources by engineering undergraduates. European Journal of Engineering Education, 42 (6). pp. 1496-1511. ISSN 0304-3797

Gledson, Barry (2016) Hybrid project delivery processes observed in constructor BIM innovation adoption. Construction Innovation, 16 (2). pp. 229-246. ISSN 1471-4175

Gledson, Barry and Greenwood, David (2016) Surveying the extent and use of 4D BIM in the UK. Journal of Information Technology in Construction (ITcon), 21. pp. 57-71. ISSN 1874-4753

Gong, Chengyuan, Xing, Lu, Liang, Cong and Tu, Zhengkai (2022) Modeling and dynamic characteristic simulation of air-cooled proton exchange membrane fuel cell stack for unmanned aerial vehicle. Renewable Energy, 188. pp. 1094-1104. ISSN 0960-1481

Guadagno, L., Raimondo, M., Vertuccio, L., Mauro, M., Guerra, G., Lafdi, Khalid, De Vivo, B., Lamberti, P., Spinelli, G. and Tucci, V. (2015) Optimization of graphene-based materials outperforming host epoxy matrices. RSC Advances, 5 (46). pp. 36969-36978. ISSN 2046-2069

Habchi, Charbel, Khaled, Mahmoud, Lemenand, Thierry, Della Valle, Dominique, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) A semi-analytical approach for temperature distribution in Dean flow. Heat and Mass Transfer, 50 (1). pp. 23-30. ISSN 0947-7411

Hackney, Philip and Oppon, Charles (2020) Fatigue Analysis of Additive Manufactured Long Fibre Reinforced Nylon Materials. Procedia CIRP, 51. pp. 678-683. ISSN 2212-8271

Haider, Julfikar and Sarwar, Mohammed (2012) Selection of advanced coating on a milling cutter used for manufacturing saw teeth. International Journal of Surface Science and Engineering, 6 (1/2). pp. 45-58. ISSN 1749-785X

Han, Wei, Liu, Dejun, Lian, Xiaokang, Mallik, Arun, Wei, Fangfang, Sun, Lei, Farrell, Gerald, Semenova, Yuliya and Wu, Qiang (2016) A spherical-structure based fiber sensor for simultaneous measurement of ammonia gas concentration and temperature. Proceedings of SPIE, 10025. 100251J. ISSN 0277-786X

Han, Xin, Li, Rong, Wang, Jian, Qin, Sheng-feng and Ding, Guofu (2018) Identification of key design characteristics for complex products adaptive design. International Journal of Advanced Manufacturing Technology, 95 (1-4). pp. 1215-1231. ISSN 0268-3768

Hanifi, Shahram, Liu, Xiaolei, Lin, Zi and Lotfian, Saeid (2020) A Critical Review of Wind Power Forecasting Methods—Past, Present and Future. Energies, 13 (15). p. 3764. ISSN 1996-1073

Hassanzadeh, Ahmad, Hassas, Behzad Vaziri, Kouachi, Sabri, Brabcova, Zuzana and Çelika, Mehmet (2016) Effect of bubble size and velocity on collision efficiency in chalcopyrite flotation. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 498. pp. 258-267. ISSN 0927-7757

Hawkes, Jeremy, Maramizonouz, Sadaf, Jia, Changfeng, Rahmati, Mohammad, Zheng, Tengfei, Mcdonnell, Martin and Fu, Yong Qing (2022) Node formation mechanisms in acoustofluidic capillary bridges. Ultrasonics, 121. p. 106690. ISSN 0041-624X

Hayashi, Takao, Minemoto, Takashi, Zoppi, Guillaume, Forbes, Ian, Tanaka, Kenji, Yamada, Satoshi, Araki, Tsutomu and Takakura, Hideyuki (2009) Effect of composition gradient in Cu(In,Al)Se2 solar cells. Solar Energy Materials and Solar Cells, 93 (6-7). pp. 922-925. ISSN 0927-0248

Hikita, Muneaki, Bradford, Robyn and Lafdi, Khalid (2014) Growth and Properties of Carbon Microcoils and Nanocoils. Crystals, 4 (4). pp. 466-489. ISSN 2073-4352

Hodzic, Erdzan, Jangi, Mehdi, Szasz, Robert-Zoltan and Bai, Xue-Song (2017) Large eddy simulation of bluff body flames close to blow-off using an Eulerian stochastic field method. Combustion and Flame, 181. pp. 1-15. ISSN 0010-2180

Hosseini Biroun, Seyedmehdi, Li, Jie, Tao, Ran, Rahmati, Mohammad, McHale, Glen, Dong, Linxi, Jangi, Mehdi, Torun, Hamd and Fu, Richard (2020) Acoustic waves for active reduction of droplet impact contact time. Physical Review Applied, 14 (2). 024029. ISSN 2331-7019

Hosseini Biroun, Seyedmehdi, Rahmati, Mohammad, Jangi, Mehdi, Chen, Baixin and Fu, Richard (2021) Numerical and experimental investigations of interdigital transducer configurations for efficient droplet streaming and jetting induced by surface acoustic waves. International Journal of Multiphase Flow, 136. p. 103545. ISSN 0301-9322

Hu, Chuan, Gao, Hongbo, Guo, Jinghua, Taghavifar, Hamid, Qin, Yechen, Na, Jing and Wei, Chongfeng (2021) RISE-Based Integrated Motion Control of Autonomous Ground Vehicles With Asymptotic Prescribed Performance. IEEE Transactions on Systems, Man, and Cybernetics: Systems, 51 (9). pp. 5336-5348. ISSN 2168-2216

Hu, Chuan, Wang, Zhenfeng, Taghavifar, Hamid, Na, Jing, Qin, Yechen, Guo, Jinghua and Wei, Chongfeng (2019) MME-EKF-Based Path-Tracking Control of Autonomous Vehicles Considering Input Saturation. IEEE Transactions on Vehicular Technology, 68 (6). pp. 5246-5259. ISSN 0018-9545

Huang, Pei-Qiu, Wang, Yong and Wang, Kezhi (2020) Energy-Efficient Trajectory Planning for a Multi-UAV-Assisted Mobile Edge Computing System. Frontiers of Information Technology and Electronic Engineering, 21 (12). pp. 1713-1725. ISSN 2095-9184

Huda, M. Nazmul, Yu, Hongnian and Cang, Shuang (2015) Behaviour-based control approach for the trajectory tracking of an underactuated planar capsule robot. IET Control Theory & Applications, 9 (2). pp. 163-175. ISSN 1751-8644

Huda, M. Nazmul, Yu, Hongnian and Cang, Shuang (2016) Robots for minimally invasive diagnosis and intervention. Robotics and Computer-Integrated Manufacturing, 41. pp. 127-144. ISSN 0736-5845

Inam, Fawad (2014) Epoxy – the hub for the most versatile polymer with exceptional combination of superlative features. Epoxy, 1 (1). pp. 1-2. ISSN 2299-6842

Ionel-Alexandru, Gal, Luige, Vladareanu and Cang, Shuang (2018) Virtual simulation of a mechanical structure with 5DOF for induction hardening using 3D. International Journal of Engineering and Technology(UAE), 7 (2). pp. 114-118.

Iqbal, Sadia Sagar, Inam, Fawad, Iqbal, Nadeem, Jamil, Tahir, Bashir, Arshad and Shahid, Mohammad (2016) Thermogravimetric, differential scanning calorimetric, and experimental thermal transport study of functionalized nanokaolinite-doped elastomeric nanocomposites. Journal of Thermal Analysis and Calorimetry, 125 (2). pp. 871-880. ISSN 1588-2926

Jalali, Hassan, Khodaparast, H. Haddad, Madinei, H. and Friswell, M.I. (2019) Stochastic modelling and updating of a joint contact interface. Mechanical Systems and Signal Processing, 129. pp. 645-658. ISSN 0888-3270

Jalali, Hassan, Khodaparast, Hamed Haddad and Friswell, Michael I. (2019) The effect of preload and surface roughness quality on linear joint model parameters. Journal of Sound and Vibration, 447. pp. 186-204. ISSN 0022-460X

Jamil, Muhammad Ahmad, Shahzad, Muhammad Wakil and Zubair, Syed M. (2020) A comprehensive framework for thermoeconomic analysis of desalination systems. Energy Conversion and Management, 222. p. 113188. ISSN 0196-8904

Jarajreh, Mutsam Abdel-karim, Ghassemlooy, Zabih and Ng, Wai Pang (2010) Improving the chromatic dispersion tolerance in long-haul fibre links using the coherent optical orthogonal frequency division multiplexing. IET Microwaves, Antennas & Propagation, 4 (5). pp. 651-658. ISSN 1751-8725

Jarajreh, Mutsam Abdel-karim, Wei, Jinlong, Tang, Jianming, Ghassemlooy, Zabih and Ng, Wai Pang (2010) Effect of numbers of sub-carriers, cyclic prefix and analogue to digital converter parameters on coherent optical orthogonal frequency division multiplexing modem's transmission performance. IET Communications, 4 (2). pp. 213-222. ISSN 1751-8628

Ji, Zhangbin, Zhou, Jian, Lin, Huamao, Wu, Jianhui, Zhang, Dinghong, Garner, Sean, Gu, Alex, Dong, Shurong, Fu, Yong Qing and Duan, Huiguo (2021) Flexible thin-film acoustic wave devices with off-axis bending characteristics for multisensing applications. Microsystems and Nanoengineering, 7 (1). p. 97. ISSN 2055-7434

Jiang, Huan, Ziegler, Hannah, Zhang, Zhennan, Meng, Han, Chronopoulos, Dimitrios and Chen, Yanyu (2020) Mechanical properties of 3D printed architected polymer foams under large deformation. Materials & Design, 194. p. 108946. ISSN 0264-1275

Jin, Xianjian, Yan, Zeyuan, Yin, Guodong, Li, Shaohua and Wei, Chongfeng (2021) An Adaptive Motion Planning Technique for On-Road Autonomous Driving. IEEE Access, 9. pp. 2655-2664. ISSN 2169-3536

Johnston, David (2014) Solar-Based Pre-Heating and Pre-Cooling of Buildings to Reduce Overnight Energy Demand. Proceedings of the 8th International Symposium on Heating, Ventilation and Air Conditioning, 263. pp. 465-471. ISSN 1876-1100

Jonard, François, André, Frédéric, Pinel, Nicolas, Warren, Craig, Vereecken, Harry and Lambot, Sébastien (2019) Modeling of Multilayered Media Green’s Functions With Rough Interfaces. IEEE Transactions on Geoscience and Remote Sensing, 57 (10). pp. 7671-7681. ISSN 0196-2892

Jovanovic, Milutin (2007) Brushless doubly fed reluctance machines: an emerging technology. International Journal of Emerging Electric Power Systems, 8 (1). ISSN 1553-779X

Jovanovic, Milutin, Betz, Robert and Yu, James (2002) The use of doubly fed reluctance machines for large pumps and wind turbines. IEEE Transactions on Industry Applications, 38 (6). pp. 1508-1516. ISSN 0093-9994

Jovanovic, Milutin, Levi, Emil and Yu, James (2006) Encoderless direct torque controller for limited speed range applications of brushless doubly-fed reluctance motors. IEEE Transactions on Industry Applications, 42 (3). pp. 712-722. ISSN 0093-9994

Kahwash, Fadi, Shyha, Islam and Maheri, Alireza (2015) Modelling of cutting fibrous composite materials: current practice. Procedia CIRP, 28. pp. 52-57. ISSN 2212-8271

Kane, Malal and Edmondson, Vikki (2020) Long-Term Skid Resistance of Asphalt Surfacing and Aggregates' Mineralogical Composition: Generalisation to Pavements Made of Different Aggregate Types. Wear, 454-55. p. 203339. ISSN 0043-1648

Kane, Malal and Edmondson, Vikki (2018) Modelling the bitumen scour effect: Enhancement of a dynamic friction model to predict the skid resistance of rubber upon asphalt pavement surfaces subjected to wear by traffic polishing. Wear, 400-40. pp. 100-110. ISSN 0043-1648

Kassem, Mohamad, Benomran, Leila and Teizer, Jochen (2017) Virtual environments for safety learning in construction and engineering: seeking evidence and identifying gaps for future research. Visualization in Engineering, 5 (1). p. 16. ISSN 2213-7459

Keenan-Jones, Duncan, Motta, Davide, Garcia, Marcelo H., Sivaguru, Mayandi, Perillo, Mauricio, Shosted, Ryan K. and Fouke, Bruce W. (2022) Travertine crystal growth ripples record the hydraulic history of ancient Rome’s Anio Novus aqueduct. Scientific Reports, 12 (1). p. 1239. ISSN 2045-2322

Kelly, Ciaran (2019) Degrading an enzyme to increase its product: a novel approach to decoupling biosynthesis and growth. Synthetic Biology, 4 (1). ISSN 2397-7000

Khaled, M., Gad El Rab, M., Hachem, F., Elhage, H., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2016) Experimental study of the flow induced by a vehicle fan and the effect of engine blockage in a simplified model. International Journal of Automotive Technology, 17 (4). pp. 617-627. ISSN 1229-9138

Khaled, Mahmoud, Ramadan, Mohamad, El-Hage, Hicham, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Review of underhood aerothermal management: Towards vehicle simplified models. Applied Thermal Engineering, 73 (1). pp. 842-858. ISSN 1359-4311

Khan, Fahad Saleem Ahmed, Mubarak, N. M., Khalid, Mohammad, Khan, Mohammad Mansoob, Tan, Yie Hua, Walvekar, Rashmi, Abdullah, E. C., Karri, Rama Rao and Rahman, Muhammad (2022) Comprehensive review on carbon nanotubes embedded in different metal and polymer matrix: fabrications and applications. Critical Reviews in Solid State and Materials Sciences, 47 (6). pp. 837-864. ISSN 1040-8436

Khatib, S. A., Naveed, Nida and Anwar, Naveed (2020) The Study of Diverse Personalities that Hinder Harmony across Engineering Team. Open Access Journal of Biogeneric Science and Research, 5 (1). pp. 1-11. ISSN 2692-1081

King, M. G., Baragwanath, Adam, Rosamond, Mark, Wood, David and Gallant, Andrew (2009) Porous PDMS force sensitive resistors. Procedia Chemistry, 1 (1). pp. 568-571. ISSN 1876-6196

Kirschner, Alon Y., Cheng, Yu-Heng, Paul, Donald R., Field, Robert and Freeman, Benny D. (2019) Fouling mechanisms in constant flux crossflow ultrafiltration. Journal of Membrane Science, 574. pp. 65-75. ISSN 0376-7388

Komolafe, Oladapo, Mrozik, Wojciech, Dolfing, Jan, Acharya, Kishor, Vassalle, Lucas, Mota, Cesar R. and Davenport, Russell (2021) Fate of four Different Classes of Chemicals Under Aerobic and Anaerobic Conditions in Biological Wastewater Treatment. Frontiers in Environmental Science, 9. p. 700245. ISSN 2296-665X

Kopnina, Helen (2020) The power to change: A brief survey of the wind power’s technological and societal potential, barriers to use, and ways forward. Visions for Sustainability, 2020 (13). pp. 44-57. ISSN 2384-8677

Kopnina, Helen, Spannring, Reingard, Hawke, Shé Mackenzie, Robertson, Colin D., Thomasberger, Alessio, Maloney, Michelle, Morini, Marco, Lynn, William S., Muhammad, Naziru Zakari, Santiago-Ávila, Francisco J., Begovic, Hana and Baranowski, Mariusz (2021) Ecodemocracy in practice: exploration of debates on limits and possibilities of addressing environmental challenges within democratic systems. Visions for Sustainability, 2021 (15). pp. 9-23. ISSN 2384-8677

Kotter, Richard (2023) New developments and environmental applications of drones: proceedings of FinDrones 2020, edited by Tarmo Lipping, Petri Linna and Nathaniel Narra, Cham, Springer International, 2022, vii+195 pp., £129.99 (cloth), ISBN 978-3-030-77859-0. International Journal of Environmental Studies. pp. 1-2. ISSN 0020-7233 (In Press)

Kuppili, Sudheer Kumar, Dheeraj Alshetty, V., Diya, M., Shiva Nagendra, S.M., Ramadurai, Gitakrishnan, Ramesh, A., Gulia, Sunil, Namdeo, Anil, Maji, Kamal, Bell, Margaret, Goodman, Paul, Hayes, Enda, Barnes, Jo, Longhurst, James and De Vito, Laura (2021) Characteristics of real-world gaseous exhaust emissions from cars in heterogeneous traffic conditions. Transportation Research, Part D: Transport and Environment, 95. p. 102855. ISSN 1361-9209

Le Minh, Hoa, O'Brien, Dominic, Faulkner, Grahame, Bouchet, Olivier, Wolf, Mike, Grobe, Liane and Li, Jianhui (2010) A 1.25-Gb/s Indoor Cellular Optical Wireless Communications Demonstrator. IEEE Photonics Technology Letters, 22 (21). pp. 1598-1600. ISSN 1041-1135

Le Minh, Hoa, O'Brien, Dominic, Faulkner, Grahame, Zeng, Lubin, Lee, Kyungwoo, Jung, Daekwang, Oh, YunJe and Won, Eun Tae (2009) 100-Mb/s NRZ visible light communications using a postequalized white LED. IEEE photonics technology letters, 21 (15). pp. 1063-1065. ISSN 1041-1135

Lekatou, Angeliki, Sfikas, Athanasios, Petsa, Christina and Karantzalis, Alexandros (2016) Al-Co Alloys Prepared by Vacuum Arc Melting: Correlating Microstructure Evolution and Aqueous Corrosion Behavior with Co Content. Metals, 6 (3). p. 46. ISSN 2075-4701

Leon, Marianthi and Laing, Richard (2022) A concept design stages protocol to support collaborative processes in architecture, engineering and construction projects. Journal of Engineering, Design and Technology, 20 (3). pp. 777-799. ISSN 1726-0531

Li, Jennifer and Kassem, Mohamad (2021) Applications of distributed ledger technology (DLT) and Blockchain-enabled smart contracts in construction. Automation in Construction, 132. p. 103955. ISSN 0926-5805

Li, Menglin, Hosseinzadeh, Mahmoud, Pagonabarraga, Ignacio, Seemann, Ralf, Brinkmann, Martin and Fleury, Jean-Baptiste (2020) Kinetics of active water/ethanol Janus droplets. Soft Matter, 16 (29). pp. 6803-6811. ISSN 1744-683X

Li, Ping and Postlethwaite, Ian (2011) Subspace and bootstrap-based techniques for helicopter model identification. Journal of the American Helicopter Society, 56 (1). pp. 12002-12013. ISSN 0002-8711

Li, Shuo, Blythe, Phil, Zhang, Yanghanzi, Edwards, Simon, Xing, Jin, Guo, Weihong, Ji, Yanjie, Goodman, Paul and Namdeo, Anil (2021) Should older people be considered a homogeneous group when interacting with level 3 automated vehicles? Transportation Research Part F: Traffic Psychology and Behaviour, 78. pp. 446-465. ISSN 1369-8478

Li, Xiaoqing, Gao, Bin, Woo, Wai Lok, Tian, Gui Yun, Qiu, Xueshi and Gu, Liangyong (2017) Quantitative Surface Crack Evaluation Based on Eddy Current Pulsed Thermography. IEEE Sensors Journal, 17 (2). pp. 412-421. ISSN 1530-437X

Li, Zhijie, Wang, Junqiang, Wang, Ningning, Yan, Shengnan, Liu, Wei, Fu, Yong Qing and Wang, Zhiguo (2017) Hydrothermal synthesis of hierarchically flower-like CuO nanostructures with porous nanosheets for excellent H2S sensing. Journal of Alloys and Compounds, 725. pp. 1136-1143. ISSN 0925-8388

Lian, Xiaokang, Farrell, Gerald, Wu, Qiang, Han, Wei, Shen, Changyu, Ma, Youqiao and Semenova, Yuliya (2020) Spectral dependence of transmission losses in high-index polymer coated no-core fibers. Journal of Lightwave Technology, 38 (22). pp. 6352-6361. ISSN 0733-8724

Lin, Zi and Sayer, P. (2015) Influence of water depth variation on the hydrodynamics of deep-water mooring characteristics. Ocean Engineering, 109. pp. 553-566. ISSN 0029-8018

Lin, Zi and Sayer, Philip (2015) An enhanced stiffness model for elastic lines and its application to the analysis of a moored floating offshore wind turbine. Ocean Engineering, 109. pp. 444-453. ISSN 0029-8018

Liu, Caige, Wu, Shuangfeng, Yin, Changzhi, Xu, Jungu, Xiong, Ying, Liu, Laijun, Khaliq, Jibran and Li, Chunchun (2021) Phase transformation and ionic conductivity mechanism of a low-temperature sintering semiconductor Na2CaV4O12. Journal of Alloys and Compounds, 886. p. 161259. ISSN 0925-8388

Liu, Dejun, Li, Wei, Wu, Qiang, Zhao, Haoyu, Ling, Fengzi, Tian, Ke, Shen, Changyu, Han, Wei, Wei, Fangfang, Farrell, Gerald, Semenova, Yuliya and Wang, Pengfei (2021) High sensitivity liquid level sensor for microfluidic applications using a hollow core fiber structure. Sensors and Actuators A: Physical, 332. p. 113134. ISSN 0924-4247

Liu, Henry, Love, Peter, Sing, Michael, Carey, Brad and Matthews, Jane (2015) Modeling Australia’s Construction Workforce Demand: Empirical Study with a Global Economic Perspective. Journal of Construction Engineering and Management, 141 (4). 05014019. ISSN 0733-9364

Liu, Huaxin and Qi, Xiaohui (2018) Random field characterization of uniaxial compressive strength and elastic modulus for intact rocks. Geoscience Frontiers, 9 (6). pp. 1609-1618. ISSN 1674-9871

Liu, Pengcheng, Yu, Hongnian and Cang, Shuang (2019) Modelling and analysis of dynamic frictional interactions of vibro-driven capsule systems with viscoelastic property. European Journal of Mechanics - A/Solids, 74. pp. 16-25. ISSN 0997-7538

Liu, Pengcheng, Yu, Hongnian and Cang, Shuang (2018) Trajectory Synthesis and Optimization of an Underactuated Microrobotic System with Dynamic Constraints and Couplings. International Journal of Control, Automation and Systems, 16 (5). pp. 2373-2383. ISSN 1598-6446

Liu, Xiangyun, Zhang, Xiaoying, Lu, Tao, Mahkamov, Khamid, Wu, Hongwei and Mirzaeian, Mojtaba (2016) Numerical Simulation of Sub-cooled Boiling Flow with Fouling Deposited Inside Channels. Applied Thermal Engineering, 103. pp. 434-442. ISSN 1359-4311

Liu, Yingzhi, Sun, Ansu, Sridhar, Sreepathy, Li, Zhenghong, Qin, Zhuofan, Liu, Ji, Chen, Sherry, Lu, Haibao, Zhong Tang, Ben and Xu, Bin (2021) Spatially and Reversibly Actuating Soft Gel Structure by Harnessing Multimode Elastic Instabilities. ACS Applied Materials & Interfaces, 13 (30). pp. 36361-36369. ISSN 1944-8244

Liu, Yunlong, Huang, Chengfeng, Song, Qiankun, Li, Gendao and Xiong, Yu (2018) Carbon emissions reduction and transfer in supply chains under A cap-and-trade system with emissions-sensitive demand. Systems Science & Control Engineering, 6 (2). pp. 37-44. ISSN 2164-2583

Lockwood, Mike, McWilliams, Kathryn A., Owens, Mathew J., Barnard, Luke A., Watt, Clare, Scott, Chris J., Macneil, Allan R. and Coxon, John C. (2020) Semi-annual, annual and Universal Time variations in the magnetosphere and in geomagnetic activity: 2. Response to solar wind power input and relationships with solar wind dynamic pressure and magnetospheric flux transport. Journal of Space Weather and Space Climate, 10. pp. 30-53. ISSN 2115-7251

Lu, Haibao, Wang, Xiaodong, Hossain, Mokarram and Fu, Richard (2020) A methodology of hydrodynamic complexity in topologically hyper-branched polymers undergoing hierarchical multiple relaxations. Macromolecular Chemistry and Physics, 221 (13). p. 2000052. ISSN 1022-1352

Lu, Haibao, Xing, Ziyu, Chen, Mingji, Yu, Kai and Fu, Yong Qing (2021) Solvent-aided phase separation in hydrogel towards significantly enhanced mechanoresponsive strength. Acta Mechanica Sinica, 37 (5). pp. 757-766. ISSN 0567-7718

Lu, Qing, Shaikh, Z. H. and Korolkiewicz, Edward (2009) Application of a simplified probe feed impedance formula to the design of a dual frequency patch antenna. Microwave and Optical Technology Letters, 51 (5). pp. 1161-1164. ISSN 0895-2477

Ma, Jiayao, Feng, Huijuan, Chen, Yan, Hou, Degao and You, Zhong (2020) Folding of Tubular Waterbomb. Research, 2020. pp. 1-8. ISSN 2639-5274

Ma, Tao, Yuan, Jinhui, Sun, Lei, Kang, Zhe, Yan, Binbin, Sang, Xinzhu, Wang, Kuiru, Wu, Qiang, Liu, Heng, Gao, Jinhui and Yu, Chongxiu (2017) Simultaneous Measurement of the Refractive Index and Temperature Based on Microdisk Resonator With Two Whispering-Gallery Modes. IEEE Photonics Journal, 9 (1). pp. 1-13. ISSN 1943-0655

Mahammedi, C., Mahdjoubi, L., Booth, C.A. and Butt, Talib E. (2022) Framework for preliminary risk assessment of brownfield sites. Science of the Total Environment, 807 (Part 3). p. 151069. ISSN 0048-9697

Mahammedi, Charf, Mahdjoubi, Lamine, Booth, Colin, Bowman, Russell and Butt, Talib E. (2022) Criteria for Preliminary Risk Assessment of Brownfield Site: An International Survey of Experts. Environmental Management, 70 (4). pp. 681-696. ISSN 0364-152X

Mahammedi, Charf E., Mahdjoubi, Lamine, Booth, Colin A. and Butt, Talib E. (2020) Towards the creation of a decision support system tool for the preliminary risk assessment of brownfield sites. WIT Transactions on Ecology and the Environment, 241. pp. 257-265. ISSN 1743-3541

Mahmood, Danish, Javaid, Nadeem, Ahmed, Ghufran, Khan, Suleman and Monteiro, Valdemar (2021) A review on optimization strategies integrating renewable energy sources focusing uncertainty factor - paving path to eco-friendly smart cities. Sustainable Computing: Informatics and Systems, 30. p. 100559. ISSN 2210-5379

Malik, Faheem, Dala, Laurent, Khalid, Muhammad and Busawon, Krishna (2022) Intelligent Real-Time Modelling of Rider Personal Attributes for Safe Last-Mile Delivery to Provide Mobility as a Service. Applied Sciences, 12 (20). p. 10643. ISSN 2076-3417

Mansour Abadi, Mojtaba, Ghassemlooy, Zabih, Bhatnagar, Manav, Lavery, Martin, Zvanovec, Stanislav and Khalighi, Ali (2018) Differential Signalling in Free-Space Optical Communication Systems. Applied Sciences, 8 (6). p. 872. ISSN 2076-3417

Mansour-Saatloo, Amin, Ebadi, Ramin, Mirzaei, Mohammad Amin, Zare, Kazem, Mohammadi-Ivatloo, Behnam, Marzband, Mousa and Anvari-Moghaddam, Amjad (2021) Multi-objective IGDT-based scheduling of low-carbon multi-energy microgrids integrated with hydrogen refueling stations and electric vehicle parking lots. Sustainable Cities and Society, 74. p. 103197. ISSN 2210-6707

Maqbool, Rashid and Akubo, Stephen Arome (2022) Solar energy for sustainability in Africa: The challenges of socio-economic factors and technical complexities. International Journal of Energy Research, 46 (12). pp. 16336-16354. ISSN 0363-907X

Marouf, Shadman, Bell, Margaret Carol, Goodman, Paul, Namdeo, Anil and Neasham, Jeffery (2018) Pervasive wireless sensors: A new monitoring tool for road traffic noise evaluation. Applied Acoustics, 135. pp. 48-59. ISSN 0003-682X

Martinez Rodriguez, Pablo, Mohsen, Osama, Al-Hussein, Mohamed and Ahmad, Rafiq (2022) Vision-based automated waste audits: a use case from the window manufacturing industry. International Journal of Advanced Manufacturing Technology, 119 (11-12). pp. 7735-7749. ISSN 0268-3768

Martinez Rodriguez, Pablo, Vargas-Martinez, Adriana, Roman-Flores, Armando and Ahmad, Rafiq (2020) A science mapping study on learning factories research. Procedia Manufacturing, 45. pp. 84-89. ISSN 2351-9789

McGee, Olivia, Jiang, Huan, Qian, Feng, Jia, Zian, Wang, Lifeng, Meng, Han, Chronopoulos, Dimitrios, Chen, Yanyu and Zuo, Lei (2019) 3D printed architected hollow sphere foams with low-frequency phononic band gaps. Additive Manufacturing, 30. p. 100842. ISSN 2214-8604

McHale, Glen, Ledesma Aguilar, Rodrigo and Wells, Gary (2020) Interfacial Strategies for Smart Slippery Surfaces. Journal of Bionic Engineering, 17 (4). pp. 633-643. ISSN 1672-6529

McLaggan, M. S., Hadden, R. M. and Gillie, Martin (2018) Fire Performance of Phase Change Material Enhanced Plasterboard. Fire Technology, 54 (1). pp. 117-134. ISSN 0015-2684

McLaggan, Martyn S., Hadden, Rory M. and Gillie, Martin (2017) Flammability assessment of phase change material wall lining and insulation materials with different weight fractions. Energy and Buildings, 153. pp. 439-447. ISSN 0378-7788

Mehvari, Saeid, Sanchez Vicente, Yolanda, Gonzalez Sanchez, Sergio and Lafdi, Khalid (2022) Conductivity Behaviour under Pressure of Copper Micro-Additive/Polyurethane Composites (Experimental and Modelling). Polymers, 14 (7). p. 1287. ISSN 2073-4360

Meng, Han, Ao, Q.B., Ren, S.W., Xin, F.X., Tang, H.P. and Lu, T.J. (2015) Anisotropic acoustical properties of sintered fibrous metals. Composites Science and Technology, 107. pp. 10-17. ISSN 0266-3538

Meng, Han, Chronopoulos, D., Fabro, A.T., Elmadih, W. and Maskery, I. (2020) Rainbow metamaterials for broadband multi-frequency vibration attenuation: Numerical analysis and experimental validation. Journal of Sound and Vibration, 465. p. 115005. ISSN 0022-460X

Meng, Han, Chronopoulos, Dimitrios and Fabro, Adriano T. (2020) Numerical simulation data for the dynamic properties of rainbow metamaterials. Data in Brief, 28. p. 104772. ISSN 2352-3409

Meng, Han, Chronopoulos, Dimitrios, Fabro, Adriano T., Maskery, Ian and Chen, Yanyu (2020) Optimal design of rainbow elastic metamaterials. International Journal of Mechanical Sciences, 165. p. 105185. ISSN 0020-7403

Meng, Han, Galland, M.A., Ichchou, M., Bareille, O., Xin, F.X. and Lu, T.J. (2017) Small perforations in corrugated sandwich panel significantly enhance low frequency sound absorption and transmission loss. Composite Structures, 182. pp. 1-11. ISSN 0263-8223

Meng, Han, Galland, M.A., Ichchou, M., Xin, F.X. and Lu, T.J. (2019) On the low frequency acoustic properties of novel multifunctional honeycomb sandwich panels with micro-perforated faceplates. Applied Acoustics, 152. pp. 31-40. ISSN 0003-682X

Micelli, Francesco, Corradi, Marco, Aiello, Maria and Borri, Antonio (2017) Properties of Aged GFRP Reinforcement Grids Related to Fatigue Life and Alkaline Environment. Applied Sciences, 7 (9). p. 897. ISSN 2076-3417

Miles, Robert, Ramakrishna Reddy, Kotte and Forbes, Ian (1999) Formation of polycrystalline thin films of CuInS2 by a two step process. Journal of Crystal Growth, 198 (1). pp. 316-320. ISSN 0022-0248

Million, Angela, Parnell, Rosie and Coelen, Thomas (2018) Editorial: Policy, Practice and Research in Built Environment Education. Proceedings of the Institution of Civil Engineers: Urban Design and Planning, 171 (1). pp. 1-4. ISSN 1755-0793

Mingyang, Zhu, Wang, Nannan, Wang, Jun, Zinan, Jiang, Huang, Jiarui and Liu, Xiaoteng (2021) A strategy of using temporary space-holders to increase the capacity for Li-S batteries. Journal of Electroanalytical Chemistry, 882. p. 115008. ISSN 1572-6657

Moghadam, Salar Valizadeh, Sharafati, Ahmad, Feizi, Hajar, Marjaie, Seyed Mohammad Saeid, Asadollah, Seyed Babak Haji Seyed and Motta, Davide (2021) An efficient strategy for predicting river dissolved oxygen concentration: application of deep recurrent neural network model. Environmental Monitoring and Assessment, 193 (12). p. 798. ISSN 0167-6369

Musehane, Ndivhuwo, Combrinck, Madeleine and Dala, Laurent (2021) Eulerian Derivation of the Conservation Equation for Energy in a Non-Inertial Frame of Reference in Arbitrary Motion. Applied Mathematics and Computation, 399. p. 126002. ISSN 0096-3003

Nagaratnam, Brabha, Rahman, Muhammad, Mirasa, Abdul Karim, Mannan, Mohammad Abdul and Lame, Seyed Omid (2016) Workability and heat of hydration of self-compacting concrete incorporating agro-industrial waste. Journal of Cleaner Production, 112. pp. 882-894. ISSN 0959-6526

Narayana, Mahinsasa, Putrus, Ghanim, Jovanovic, Milutin, Leung, Pak Sing and McDonald, Stephen (2012) Generic maximum power point tracking controller for small-scale wind turbines. Renewable Energy, 44. pp. 72-79. ISSN 0960-1481

Naung, Shine Win, Rahmati, Mohammad and Farokhi, Hamed (2021) Nonlinear Frequency Domain Solution Method for Aerodynamic and Aeromechanical Analysis of Wind Turbines. Renewable Energy, 167. pp. 66-81. ISSN 0960-1481

Newbon, Joshua, Sims-Williams, David and Dominy, Robert (2017) Aerodynamic Analysis of Grand Prix Cars Operating in Wake Flows. SAE International Journal of Passenger Cars - Mechanical Systems, 10 (1). pp. 318-329. ISSN 1946-4002

Newton, Michael, Atherton, Shaun, Morris, Robert, Stanley, Simon, Evans, Carl, Hughes, David and McHale, Glen (2010) Low-Cost QCM Sensor System for Screening Semen Samples. Journal of Sensors, 2010 (326365). pp. 1-5. ISSN 1687-725X

Nguyen, Nam V., Nguyen, Hoang, Lee, Seunghye and Nguyen-Xuan, H. (2018) Geometrically nonlinear polygonal finite element analysis of functionally graded porous plates. Advances in Engineering Software, 126. pp. 110-126. ISSN 0965-9978

Nguyen, Thanh-Tin, Kook, Seungho, Lee, Chulmin, Field, Robert and Kim, In S. (2019) Critical flux-based membrane fouling control of forward osmosis: Behavior, sustainability, and reversibility. Journal of Membrane Science, 570571. pp. 380-393. ISSN 0376-7388

Nnanatu, Chibuzor Christopher, Atilola, Glory, Komba, Paul, Mavatikua, Lubanzadio, Moore, Zhuzhi, Matanda, Dennis, Obianwu, Otibho and Kandala, Ngianga-Bakwin (2021) Evaluating changes in the prevalence of female genital mutilation/cutting among 0-14 years old girls in Nigeria using data from multiple surveys: A novel Bayesian hierarchical spatio-temporal model. PLoS ONE, 16 (2). e0246661. ISSN 1932-6203

Nwofe, Patrick, Ramakrishna Reddy, Kotte, Sreedevi, Gedi, Tan, Kian and Miles, Robert (2012) Structural, optical, and electro-optical properties of thermally evaporated tin sulphide layers. Japanese Journal of Applied Physics, 51. 10NC36-10NC40. ISSN 0021-4922

Ozoemena, Chukwunonso Emmanuel, Hackney, Philip, Birkett, Martin and Bell, David (2019) An experimental strategy for fractionating 33 and 34 factorial experiments. International Journal for Quality Research, 13 (3). pp. 505-520. ISSN 1800-6450

Palusinska-Szysz, Marta, Alexander, Kimberly J., Furlong, Jennifer L., Baron, Julianne L., Rihs, John D., Stephenson, Dominic, Perry, John D. and Stout, Janet E. (2021) Evaluation of a new culture medium for isolation of nontuberculous mycobacteria from environmental water samples. PLoS ONE, 16 (3). e0247166. ISSN 1932-6203

Pan, Han, Zhao, Xiaojuan, Gong, Xiu, Li, Hao, Ladi, Xiao Li, Huang, Wenchao, Ahmad, Shahzada, Ding, Liming, Shen, Yan, Wang, Mingkui and Fu, Yong Qing (2020) Advances in design engineering and merits of electron transporting layers in perovskite solar cells. Materials Horizon, 7 (9). pp. 2276-2291. ISSN 2051-6347

Parsa, Maria, Harmand, Souad and Sefiane, Khellil (2018) Mechanisms of pattern formation from dried sessile drops. Advances in Colloid and Interface Science, 254. pp. 22-47. ISSN 0001-8686

Perera, Dilini, Upasiri, Irindu, Poologanathan, Keerthan, Perampalam, Gatheeshgar, O'Grady, Kate, Rezazadeh, Mohammadali, Rajanayagam, Heshachanaa and Hewavitharana, Thathsarani (2022) Fire performance analyses of modular wall panel designs with loadbearing SHS columns. Case Studies in Construction Materials, 17. e01179. ISSN 2214-5095

Petit, D., Faulkner, C. C., Johnstone, S., Wood, David and Cowburn, R. P. (2005) Nanometer scale patterning using focused ion beam milling. Review of Scientific Instruments, 76 (2). 026105. ISSN 0034-6748

Popoola, Wasiu Oyewole and Ghassemlooy, Zabih (2009) BPSK subcarrier intensity modulated free-space optical communications in atmospheric turbulence. Journal of Lightwave Technology, 27 (8). pp. 967-973. ISSN 0733-8724

Popoola, Wasiu Oyewole, Ghassemlooy, Zabih, Lee, Chung Ghiu and Boucouvalas, Anthony (2010) Scintillation effect on intensity modulated laser communication systems: a laboratory demonstration. Optics and Laser Technology, 42 (4). pp. 682-692. ISSN 0030-3992

Popoola, Wasiu Oyewole, Ghassemlooy, Zabih and Leitgeb, Erich (2009) BER and outage probability of DPSK subcarrier intensity modulated free space optics in fully developed speckle. Journal of Communications, 4 (8). pp. 546-554. ISSN 1796-2021

Prakoso, Teguh, Ngah, Razali, Ghassemlooy, Zabih and Rahman, Tharek (2011) Antenna representation in two-port network scattering parameter. Microwave and Optical Technology Letters, 53 (6). pp. 1404-1409. ISSN 0895-2477

Prathap, Pathi, Venkata Subbaiah, Yerva, Ramakrishna Reddy, Kotte and Miles, Robert (2007) Influence of growth rate on microstructure and optoelectronic behaviour of ZnS films. Journal of Physics D: Applied Physics, 40 (17). pp. 5275-5282. ISSN 0022-3727

Prempain, Emmanuel, Turner, Matthew and Postlethwaite, Ian (2009) Coprime factor based anti-windup synthesis for parameter-dependent systems. Systems & Control Letters, 58 (12). pp. 810-817. ISSN 0167-6911

Qi, Xiaohui, Wang, Hao, Chu, Jian and Chiam, Kiefer (2022) Two-dimensional prediction of the interface of geological formations: A comparative study. Tunnelling and Underground Space Technology, 121. p. 104329. ISSN 0886-7798

Qi, Xiaohui, Yang, Zhiyong and Chu, Jian (2022) Prediction of interface of geological formations using generalized additive model. Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards, 16 (1). pp. 127-139. ISSN 1749-9518

Qiu, Shi, Yuan, Jinhui, Duan, Sainan, Zhou, Xian, Mei, Chao, Qu, Yuwei, Yan, Binbin, Wu, Qiang, Wang, Kuiru, Sang, Xinzhu, Long, Keping and Yu, Chongxiu (2021) High sensitivity temperature sensor based on a helically twisted photonic crystal fiber. Results in Physics, 29. p. 104767. ISSN 2211-3797

Rahimian, Farzad Pour, Seyedzadeh, Saleh and Glesk, Ivan (2019) OCDMA-Based Sensor Network for Monitoring Construction Sites Affected by Vibrations. Journal of Information Technology in Construction, 24. pp. 299-317. ISSN 1400-6529

Rahman, Muhammad, Pakrashi, Vikram, Banerjee, Subhadeep and Orr, Trevor (2016) Suitable Waves for Bender Element Tests: Interpretations, Errors and Modelling Aspects. Periodica Polytechnica Civil Engineering, 60 (2). pp. 145-158. ISSN 0553-6626

Rajanayagam, Heshachanaa, Gunawardena, Tharaka, Mendis, Priyan, Poologanathan, Keerthan, Perampalam, Gatheeshgar, Dissanayake, Madhushan and Corradi, Marco (2022) Evaluation of inter-modular connection behaviour under lateral loads: An experimental and numerical study. Journal of Constructional Steel Research, 194. p. 107335. ISSN 0143-974X

Rajbhandari, Sujan, Ghassemlooy, Zabih and Aldibbiat, Nawras (2009) Slot error rate performance of DH-PIM with symbol retransmission for optical wireless links. European Transactions on Telecommunications, 20 (2). pp. 217-215. ISSN 1124-318X

Rajbhandari, Sujan, Ghassemlooy, Zabih and Angelova, Maia (2009) Bit error performance of diffuse indoor optical wireless channel pulse position modulation system employing artificial neural networks for channel equalisation. IET Optoelectronics, 3 (4). pp. 169-179. ISSN 1751-8768

Rajbhandari, Sujan, Ghassemlooy, Zabih and Angelova, Maia (2009) Effective denoising and adaptive equalization of indoor optical wireless channel with artificial light using the discrete wavelet transform and artificial neural network. Journal of Lightwave Technology, 27 (20). pp. 4493-4500. ISSN 0733-8724

Rajbhandari, Sujan, Ghassemlooy, Zabih and Angelova, Maia (2011) The performance of a dual header pulse position modulation in the presence of artificial light interferences in an indoor optical wireless communications channel with wavelet denoising. American Journal of Engineering and Applied Sciences, 4 (4). pp. 513-519. ISSN 1941-7020

Ramakrishna Reddy, Kotte, Forbes, Ian and Miles, Robert (2001) Investigations on the sulphur incorporation in sputtered Cu, In multilayer precursors. Applied Surface Science, 169. pp. 387-391. ISSN 0169-4332

Ramakrishna Reddy, Kotte, Forbes, Ian, Miles, Robert, Carter, M. J. and Dutta, Partha (1998) Growth of high-quality CuInSe2 films by selenising sputtered Cu–In bilayers using a closed graphite box. Materials Letters, 37 (1-2). pp. 57-62. ISSN 0167-577X

Ramakrishna Reddy, Kotte, Reddy, Vasudeva Reddy Minnam, Leach, Mark, Tan, Kian, Jang, Dongyoung and Miles, Robert (2011) Crystalline behaviour of SnS layers produced by sulfurization of Sn films using H2S. AIP conference proceedings, 1447. pp. 709-710. ISSN 0094-243X

Raza, Mohsin, Le Minh, Hoa, Aslam, Nauman and Hussain, Sajjad (2017) Deterministic Scheduling for Energy Efficient and Reliable Communication in Heterogeneous Sensing Environments in Industrial Wireless Sensor Networks. EAI Endorsed Transactions on Energy Web, 3 (11). p. 152764. ISSN 2032-944X

Rehman, Sheikh, Akram, Sufyan, Kanellopoulos, Antonios, Elmarakbi, Ahmed and Karagiannidis, Panagiotis (2020) Development of new graphene/epoxy nanocomposites and study of cure kinetics, thermal and mechanical properties. Thermochimica Acta, 694. p. 178785. ISSN 0040-6031

Richards, Daniel and Amos, Martyn (2017) Shape Optimization with Surface-Mapped CPPNs. IEEE Transactions on Evolutionary Computation, 21 (3). pp. 391-407. ISSN 1089-778X

Rigatos, Gerasimos, Busawon, Krishna, Serpanos, Dimitrios, Siadimas, Vasilios, Siano, Pierluigi and Abbaszadeh, Masoud (2018) Nonlinear optimal control for ship propulsion with the use of an induction motor and a drivetrain. MATEC Web of Conferences, 188. 05007. ISSN 2261-236X

Roy, Tushar Kanti and Mahmud, Md Apel (2022) Fault current compensations in resonant grounded distribution systems to mitigate powerline bushfires using a nonsingular terminal sliding model controller. IET Generation, Transmission & Distribution, 16 (3). pp. 479-491. ISSN 1751-8687

Roy, Tushar Kanti, Mahmud, Md Apel, Nasiruzzaman, A. B. M., Barik, Md Abdul and Oo, Amanullah Maung Than (2021) A non‐singular fast terminal sliding mode control scheme for residual current compensation inverters in compensated distribution networks to mitigate powerline bushfires. IET Generation, Transmission & Distribution, 15 (9). pp. 1421-1434. ISSN 1751-8687

Rudie, Anna, Schornack, Anna Marie, Wu, Qiang, Zhang, Qifeng and Wang, Danling (2022) Two-Dimensional Ti3C2 MXene-Based Novel Nanocomposites for Breath Sensors for Early Detection of Diabetes Mellitus. Biosensors, 12 (5). p. 332. ISSN 2079-6374

Rutherford, R., Moulitsas, Irene, Snow, Ben, Kolios, Athanasios and De Dominicis, Michela (2015) CranSLIK v2.0: improving the stochastic prediction of oil spill transport and fate using approximation methods. Geoscientific Model Development, 8 (10). pp. 3365-3377. ISSN 1991-9603

Sadyk, Dina and Islam, Dewan Md Zahurul (2022) Brand Equity and Usage Intention Powered by Value Co-Creation: A Case of Instagram in Kazakhstan. Sustainability, 14 (1). p. 500. ISSN 2071-1050

Saini, Vikash Kumar, Seervi, Anita, Kumar, Rajesh, A, Sujil, Mahmud, Md Apel and Al-Sumaiti, Ameena Saad (2022) Cloud Energy Storage Based Embedded Battery Technology Architecture for Residential Users Cost Minimization. IEEE Access, 10. pp. 43685-43702. ISSN 2169-3536

Salem, Ghozzia and Mahkamov, Khamid (2011) Case study: Modelling and sizing stand-alone PV systems for powering mobile phone stations in Libya. Proceedings of the World Renewable Energy Congress – Sweden, 8–13 May, 2011, Linköping, Sweden, 57 (11). pp. 2891-2898. ISSN 1650-3686

Salman, Naveed, Khan, Muhammad Waqas, Lim, Michael, Khan, Amir, Kemp, Andrew and Noakes, Catherine (2021) Use of Multiple Low Cost Carbon Dioxide Sensors to Measure Exhaled Breath Distribution with Face Mask Type and Wearing Behaviour. Sensors, 21 (18). p. 6204. ISSN 1424-3210

Salokhe, Shivam, Rahmati, Mohammad and Masoodi, Ryan (2021) Numerical modelling of the flow in a swelling preform during LCM mould filling. Journal of Reinforced Plastics and Composites, 40 (13-14). pp. 490-504. ISSN 0731-6844

Salokhe, Shivam, Rahmati, Mohammad, Masoodi, Ryan and Entwistle, Jane (2022) Numerical simulation of flow through absorbing porous media; Part 1: Rigid porous media. Journal of Porous Media, 25 (2). pp. 53-75. ISSN 1091-028X

Samy, Ihab, Postlethwaite, Ian and Gu, Da-Wei (2010) A comparative study of NN- and EKF-based SFDA schemes with application to a nonlinear UAV model. International Journal of Control, 83 (5). pp. 1025-1043. ISSN 0020-7179

Samy, Ihab, Postlethwaite, Ian, Gu, Da-Wei and Green, John (2010) Neural-network-based flush air data sensing system demonstrated on a mini air vehicle. Journal of Aircraft, 47 (1). pp. 18-31. ISSN 0021-8669

Sarac, Ferdi, Uslan, Volkan, Seker, Huseyin and Bouridane, Ahmed (2015) Comparison of unsupervised feature selection methods for high-dimensional regression problems in prediction of peptide binding affinity. Proceedings of the 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2015). pp. 8173-8176. ISSN 1557-170X

Sarwar, Mohammed, Hellbergh, Hakan and Persson, Martin (2005) Wear and failure modes in the bandsawing operation when cutting ball-bearing steel. Wear, 259 (7-12). pp. 1144-1150. ISSN 0043-1648

Sfikas, Athanasios, Gonzalez Sanchez, Sergio, Lekatou, Angeliki G., Kamnis, Spyros and Karantzalis, Alexandros E. (2022) A Critical Review on Al-Co Alloys: Fabrication Routes, Microstructural Evolution and Properties. Metals, 12 (7). p. 1092. ISSN 2075-4701

Sfikas, Athanasios and Lekatou, Angeliki G. (2020) Electrochemical Behavior of Al–Al9Co2 Alloys in Sulfuric Acid. Corrosion and Materials Degradation, 1 (2). pp. 249-272. ISSN 2624-5558

Shahzad, Muhammad Wakil, Burhan, Muhammad, Ghaffour, Noreddine and Ng, Kim Choon (2018) A multi evaporator desalination system operated with thermocline energy for future sustainability. Desalination, 435. pp. 268-277. ISSN 0011-9164

Shao, Hui, Liu, Qimeng and Gao, Zhiwei (2022) Material Removal Optimization Strategy of 3D Block Cutting Based on Geometric Computation Method. Processes, 10 (4). p. 695. ISSN 2227-9717

Sharafati, Ahmad, Tafarojnoruz, Ali, Motta, Davide and Yaseen, Zaher Mundher (2020) Application of nature-inspired optimization algorithms to ANFIS model to predict wave-induced scour depth around pipelines. Journal of Hydroinformatics, 22 (6). pp. 1425-1451. ISSN 1464-7141

Shatat, Mahmoud and Mahkamov, Khamid (2010) Determination of rational design parameters of a multi-stagesolar water desalination still using transient mathematical modelling. Renewable Energy, 35 (1). pp. 52-61. ISSN 0960-1481

Shenashen, Mohamed A., Emran, Mohammed Y., El Sabagh, Ayman, Selim, Mahmoud M., Elmarakbi, Ahmed and El-Safty, Sherif A. (2021) Progress in sensory devices of pesticides, pathogens, coronavirus, and chemical additives and hazards in food assessment: Food safety concerns. Progress in Materials Science, 124. p. 100866. ISSN 0079-6425

Shyha, Islam (2013) An Investigation into CO2 Laser Trimming of CFRP and GFRP Composites. Procedia Engineering, 63. pp. 931-937. ISSN 1877-7058

Shyha, Islam, Huo, Dehong, Hesamikojidi, Peyman, Eldessouky, Hossam and El-Sayed, Mahmoud Ahmed (2021) Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites. International Journal of Advanced Manufacturing Technology, 112 (3-4). pp. 1101-1113. ISSN 0268-3768

Siddique, Shohel, Novak, Adam, Guliyev, Emin, Yates, Kyari, Leung, Ken and Njuguna, James (2022) Oil-Based Mud Waste as a Filler Material in LDPE Composites: Evaluation of Mechanical Properties. Polymers, 14 (7). p. 1455. ISSN 2073-4360

Siddiqui, Farrukh Arsalan, She, Qianhong, Fane, Anthony G. and Field, Robert (2018) Exploring the differences between forward osmosis and reverse osmosis fouling. Journal of Membrane Science, 565. pp. 241-253. ISSN 0376-7388

Simon, A., Lipusz, D., Baumli, P., Balint, P., Kaptay, G., Gergely, G., Sfikas, Athanasios, Lekatou, A., Karantzalis, A. and Gacsi, Z. (2015) Microstructure And Mechanical Properties Of Al-WC Composites. Archives of Metallurgy and Materials, 60 (2). pp. 1517-1521. ISSN 2300-1909

Sindhwani, Rohit, Vaidya, Omkarprasad S., Antony, Jiju and Shokri, Alireza (2023) Evaluating Performance of Projects Using Six Sigma Approach. IEEE Transactions on Engineering Management, 70 (10). pp. 3539-3552. ISSN 0018-9391

Smith, Dave (1997) Low cost tyre monitoring system using electronic article surveillance techniques. IEE Colloquium (Digest) (46). 3/1-3/4. ISSN 0963 3308

Smurthwaite, David and Rosinski, Jarek (2010) Type testing of high power wind turbine gearboxes: advances in modern instrumentation. Engineering Integrity, 28 (1). pp. 15-21. ISSN 1365-4101

Solano, Belen and Wood, David (2007) Design and testing of a polymeric microgripper for cell manipulation. Microelectronic Engineering, 84 (5-8). pp. 1219-1222. ISSN 0167-9317

Song, Ning, Jiang, Enhui, Liu, Xiaoteng, Zuo, Yan, Che, Guangbo, Liu, Chunbo, Yan, Yongsheng and Dong, Hongjun (2021) Ni2P QDs decorated in the multi-shelled CaTiO3 cube for creating inter-shelled channel active sites to boost photocatalytic performance. Journal of Colloid and Interface Science, 584. pp. 332-343. ISSN 0021-9797

Spiegel, Jonathan, Brüne, Markus, Dering, Nils, Pflitsch, Andreas, Qian, Zi, Agnew, Brian, Paliacin, Roberto and Irving, Malcolm (2014) Propagation of tracer gas in a subway station controlled by natural ventilation. Journal of Heat Island Institute International, 9 (2). pp. 103-107. ISSN 2188-4056

Stevens, Laura, De Vries, Marc M.J., Bos, Mark M.J.W. and Kopnina, Helen (2019) Biomimicry Design Education Essentials. Proceedings of the Design Society: International Conference on Engineering Design, 1 (1). pp. 459-468. ISSN 2220-4342

Strachan, Becky, Dele-Ajayi, Opeyemi, Stonehouse, Jane, Logan, Steve, Poolan, Tim, Blakelock, Linda and Bell, Richard (2020) Lets diversify by changing culture and challenging stereotypes: a case study from professional construction higher education programmes. Higher Education Pedagogies, 5 (1). pp. 327-339. ISSN 2375-2696

Sun, Chao, Mikhaylov, Roman, Fu, Richard, Wu, Fangda, Wang, Hanlin, Yuan, Xichen, Xie, Zhihua, Liang, Dongfang, Wu, Zhenlin and Yang, Xin (2021) Flexible Printed Circuit Board as Novel Electrodes for Acoustofluidic Devices. IEEE Transactions on Electron Devices, 68 (1). pp. 393-398. ISSN 0018-9383

Sun, Lei, Semenova, Yuliya, Wu, Qiang, Liu, Dejun, Yuan, Jinhui, Sang, Xinzhu, Yan, Binbin, Wang, Kuiru, Yu, Chongxiu and Farrell, Gerald (2016) Investigation of Humidity and Temperature Response of a Silica Gel Coated Microfiber Coupler. IEEE Photonics Journal, 8 (6). p. 6805407. ISSN 1943-0655

Sun, Mengxuan, Fang, Qisheng, Li, Zhijie, Cai, Chao, Li, Hao, Cao, Baobao, Shen, Wenzhong, Liu, Xiaoteng and Fu, Yong Qing (2021) Co-precipitation synthesis of CuCo2O4 nanoparticles for supercapacitor electrodes with large specific capacity and high rate capability. Electrochimica Acta, 397. p. 139306. ISSN 0013-4686

Sun, Shitong, Kazemi-Razi, Lisa, Kaigutha, Lisa G., Marzband, Mousa, Nafisi, Hamed and Al-Sumaiti, Ameena Saad (2022) Day-ahead offering strategy in the market for concentrating solar power considering thermoelectric decoupling by a compressed air energy storage. Applied Energy, 305. p. 117804. ISSN 0306-2619

Taghavifar, Hamid, Motlagh, Asad Modarres, Mardani, Aref, Hassanpour, Ali, Hosseinloo, Ashkan Haji, Taghavifar, Leyla and Wei, Chongfeng (2016) APPRAISAL OF TAKAGI–SUGENO TYPE NEURO-FUZZY NETWORK SYSTEM WITH A MODIFIED DIFFERENTIAL EVOLUTION METHOD TO PREDICT NONLINEAR WHEEL DYNAMICS CAUSED BY ROAD IRREGULARITIES. TRANSPORT, 31 (2). pp. 211-220. ISSN 1648-4142

Tan, Hai Chen, Udeaja, Chika, Anumba, Chimay, Carrillo, Patricia, Bouchlaghem, Nasreddine and Kamara, John (2007) Development of a methodology for live capture and re-use of project knowledge in construction. Journal of Management in Engineering, 23 (1). pp. 18-26. ISSN 0742-597X

Tang, Yufan, Ren, Shuwei, Meng, Han, Xin, Fengxian, Huang, Lixi, Chen, Tianning, Zhang, Chuanzeng and Lu, Tian Jian (2017) Hybrid acoustic metamaterial as super absorber for broadband low-frequency sound. Scientific Reports, 7 (1). ISSN 2045-2322

Taverne, Mike, Ho, Daniel and Rarity, John G. (2022) Strongly Confining Light with Air-Mode Cavities in Inverse Rod-Connected Diamond Photonic Crystals. Crystals, 12 (3). p. 303. ISSN 2073-4352

Teli, Shivani Rajendra, Eollosova, Klara, Zvanovec, Stanislav, Ghassemlooy, Zabih (Fary) and Komanec, Matej (2021) Optical camera communications link using an LED-coupled illuminating optical fiber. Optics Letters, 46 (11). pp. 2622-2625. ISSN 0146-9592

Ting, Matthew Zhi Yeon, Wong, Kwong Soon, Rahman, Muhammad and Selowarajoo, Meheron (2021) Prediction model for hardened state properties of silica fume and fly ash based seawater concrete incorporating silicomanganese slag. Journal of Building Engineering, 41. p. 102356. ISSN 2352-7102

Titirici, Magda, Baird, Sterling G, Sparks, Taylor D, Yang, Shirley Min, Brandt-Talbot, Agnieszka, Hosseinaei, Omid, Harper, David P, Parker, Richard M, Vignolini, Silvia, Berglund, Lars A, Li, Yuanyuan, Gao, Huai-Ling, Mao, Li-Bo, Yu, Shu-Hong, Díez, Noel, Ferrero, Guillermo A, Sevilla, Marta, Szilágyi, Petra Ágota, Stubbs, Connor J, Worch, Joshua C, Huang, Yunping, Luscombe, Christine K, Lee, Koon-Yang, Luo, Hui, Platts, M J, Tiwari, Devendra, Kovalevskiy, Dmitry, Fermin, David J, Au, Heather, Alptekin, Hande, Crespo-Ribadeneyra, Maria, Ting, Valeska P, Fellinger, Tim-Patrick, Barrio, Jesús, Westhead, Olivia, Roy, Claudie, Stephens, Ifan E L, Nicolae, Sabina Alexandra, Sarma, Saurav Ch, Oates, Rose P, Wang, Chen-Gang, Li, Zibiao, Loh, Xian Jun, Myers, Rupert J, Heeren, Niko, Grégoire, Alice, Périssé, Clément, Zhao, Xiaoying, Vodovotz, Yael, Earley, Becky, Finnveden, Göran, Björklund, Anna, Harper, Gavin D J, Walton, Allan and Anderson, Paul A (2022) The sustainable materials roadmap. Journal of Physics: Materials, 5 (3). 032001. ISSN 2515-7639

Torelli, Giacomo, Gillie, Martin, Mandal, Parthasarathi and Tran, Van-Xuan (2017) A multiaxial load-induced thermal strain constitutive model for concrete. International Journal of Solids and Structures, 108. pp. 115-125. ISSN 0020-7683

Torelli, Giacomo, Mandal, Parthasarathi, Gillie, Martin and Tran, Van-Xuan (2016) Concrete strains under transient thermal conditions: A state-of-the-art review. Engineering Structures, 127. pp. 172-188. ISSN 0141-0296

Torun, Hamdi, Sutanto, Jofy Hadi, Sarangapani, Krishna K., Joseph, P., Degertekin, F. L. and Zhu, C. (2007) A micromachined membrane-based active probe for biomolecular mechanics measurement. Nanotechnology, 18 (16). p. 165303. ISSN 0957-4484

Turner, Matthew, Kerr, Murray and Postlethwaite, Ian (2009) On the existence of stable, causal multipliers for systems with slope-restricted nonlinearities. IEEE Transactions on Automatic Control, 54 (11). pp. 2697-2702. ISSN 0018-9286

Villapún Puzas, Victor Manuel, Tardío, Sabrina, Cumpson, Peter, Burgess, James Grant, Dover, Lynn and Gonzalez Sanchez, Sergio (2019) Antimicrobial properties of Cu-based bulk metallic glass composites after surface modification. Surface and Coatings Technology, 372. pp. 111-120. ISSN 0257-8972

Vladareanu, Victor, Schiopu, Paul, Cang, Shuang and Yu, Hong Nian (2014) Reduced Base Fuzzy Logic Controller for Robot Actuators. Applied Mechanics and Materials, 555. pp. 249-258. ISSN 1662-7482

Walker, Sara, Colbourne, D., Fleming, Paul and Urwin, P. (2001) Citizen versus consumer. Challenges in the UK green power market. Energy Policy, 29 (6). pp. 479-487. ISSN 1873-6777

Walker, Sara and Twidell, J. (1996) Institutional and commercial factors affecting the integration of small embedded wind turbines onto weak rural UK grids. International Journal of Ambient Energy, 17 (3). pp. 139-144. ISSN 0143-0750

Wan, Chaoying and Chen, Biqiong (2011) Synthesis and characterization of biomimetic hydroxyapatite/sepiolite nanocomposites. Nanoscale, 3 (2). pp. 693-700. ISSN 2040-3364

Wan, Chaoying, Frydrych, Martin and Chen, Biqiong (2011) Strong and bioactive gelatin–graphene oxide nanocomposites. Soft Matter, 7 (13). pp. 6159-6166. ISSN 1744-683X

Wang, Caiyun, Huang, Yao, Lu, Yunhao, Pan, Hongge, Xu, Bin, Sun, Wenping, Yan, Mi and Jiang, Yinzhu (2021) Reversible Magnesium Metal Anode Enabled by Cooperative Solvation/Surface Engineering in Carbonate Electrolytes. Nano-Micro Letters, 13 (1). p. 195. ISSN 2311-6706

Wang, Ding, Liu, Yingzhi, Sridhar, Sreepathy, Li, Yifan, McHale, Glen, Lu, Haibao, Yu, Ziyi, Wang, Steven and Xu, Bin (2021) Biaxially Morphing Droplet Shape by an Active Surface. Advanced Materials Interfaces, 8 (2). p. 2001199. ISSN 2196-7350

Wang, Yong, Zhang, Qian, Tao, Ran, Chen, Dongyang, Xie, Jin, Torun, Hamdi, Dodd, Linzi, Luo, Jingting, Fu, Chen, Vernon, Jethro, Canyelles-Pericas, Pep, Binns, Richard and Fu, Richard (2021) A rapid and controllable acoustothermal microheater using thin film surface acoustic waves. Sensors and Actuators A: Physical, 318. p. 112508. ISSN 0924-4247

Wang, Yue, Das, Ridoy, Putrus, Ghanim and Kotter, Richard (2020) Economic evaluation of photovoltaic and energy storage technologies for future domestic energy systems – A case study of the UK. Energy, 203. p. 117826. ISSN 0360-5442

Wang, Zibi, Zhou, Honghao, Liu, Dong, Chen, Sherry, Wang, Ding, Dai, Sheng, Chen, Fei and Xu, Bin (2022) A Structural Gel Composite Enabled Robust Underwater Mechanosensing Strategy with High Sensitivity. Advanced Functional Materials, 32 (25). p. 2201396. ISSN 1616-301X

Ward, Kate, Crapper, Martin, Altuğ, Kerim and Crow, Jim (2017) The Byzantine Cisterns of Constantinople. Water Science and Technology : Water Supply, 17 (6). pp. 1499-1506. ISSN 1606-9749

Ward, Kate, Crow, James and Crapper, Martin (2017) Water supply infrastructure of Byzantine Constantinople. Journal of Roman Archaeology, 30. pp. 175-195. ISSN 1063-4304

Weberg, Micah, Morton, Richard and Mclaughlin, James (2020) Using Transverse Waves to Probe the Plasma Conditions at the Base of the Solar Wind. The Astrophysical Journal, 894 (1). p. 79. ISSN 1538-4357

Wei, Chongfeng and Olatunbosun, Oluremi Ayotunde (2016) The effects of tyre material and structure properties on relaxation length using finite element method. Materials & Design, 102. pp. 14-20. ISSN 0264-1275

Wei, Chongfeng, Romano, Richard, Hajiseyedjavadi, Foroogh, Merat, Natasha and Boer, Erwin (2019) Driver-centred Autonomous Vehicle Motion Control within A Blended Corridor. IFAC-PapersOnLine, 52 (5). pp. 212-217. ISSN 2405-8963

Wei, Chongfeng and Yang, Xiaoguang (2016) Static tire properties analysis and static parameters derivation to characterising tire model using experimental and numerical solutions. Journal of Advances in Vehicle Engineering, 24 (1). pp. 1-20. ISSN 2423-7345

Wei, Jiacheng, Saharudin, Mohd, Vo, Thuc and Inam, Fawad (2017) N,N-Dimethylformamide (DMF) usage in epoxy/graphene nanocomposites: problems associated with reaggregation. Polymers, 9 (6). p. 193. ISSN 2073-4360

Weirs, John and Osborne, Allan (2020) Refocusing sustainability education: using students’ reflections on their carbon footprint to reinforce the importance of considering CO2 production in the construction industry. Frontiers in Built Environment, 6. p. 23. ISSN 2297-3362

Wharton, S. J., Wright, D. M., Yeoman, T. K., James, M. K. and Sandhu, Jasmine (2018) Cross-Phase Determination of Ultralow Frequency Wave Harmonic Frequencies and Their Associated Plasma Mass Density Distributions. Journal of Geophysical Research: Space Physics, 123 (8). pp. 6231-6250. ISSN 2169-9380

Xiao, Guoqiang, Jiang, Yang, Song, Gang and Jiang, Yang (2010) Support-vector-machine tree-based domain knowledge learning toward automated sports video classification. Optical Engineering, 49 (12). p. 127003. ISSN 0091-3286

Xie, Chunli, Elmarakbi, Ahmed, Liu, Yongkuo and Zhang, Jizhou (2016) A dynamic ordered concept lattice based algorithm for early diagnosis of NPP faults. Progress in Nuclear Energy, 92. pp. 22-28. ISSN 0149-1970

Xing, Lu and Hu, Pingfang (2020) Simulation of hybrid GSHP systems utilizing radiant ceiling terminal and system evaluation with analytic hierarchy process method. Indoor and Built Environment, 29 (9). pp. 1202-1213. ISSN 1420-326X

Xing, Lu, Li, Liheng, Nan, Chi and Hu, Pingfang (2017) The Effects of Different Land Covers on Foundation Heat Exchangers Design in Chinese Rural Areas. Procedia Engineering, 205. pp. 2449-2456. ISSN 1877-7058

Xing, Ziyu, Li, Peizhao, Lu, Haibao and Fu, Richard (2021) Mechanoresponsive resonance differences in double-network hydrogels towards multipartite dynamics. Journal of Physics D: Applied Physics, 54 (46). p. 465301. ISSN 0022-3727

Xiong, Shuo, Zhou, Jian, Wu, Jianhui, Li, Honglang, Zhao, Wei, He, Chengguang, Liu, Yi, Chen, Yiqin, Fu, Richard and Duan, Huiguo (2021) High Performance Acoustic Wave Nitrogen Dioxide Sensor with Ultraviolet Activated 3D Porous Architecture of Ag-Decorated Reduced Graphene Oxide and Polypyrrole Aerogel. ACS Applied Materials & Interfaces, 13 (35). pp. 42094-42103. ISSN 1944-8244

Xu, Bofeng, Yuan, Yue, Liu, Haoming, Jiang, Peng, Gao, Ziqi, Shen, Xiang and Cai, Xin (2020) A Pitch Angle Controller Based on Novel Fuzzy-PI Control for Wind Turbine Load Reduction. Energies, 13 (22). p. 6086. ISSN 1996-1073

Xu, Liangquan, Xuan, Weipeng, Chen, Jinkai, Zhang, Chi, Tang, Yuzhi, Huang, Xiwei, Li, Wenjun, Jin, Hao, Dong, Shurong, Yin, Wuliang, Fu, Yong Qing and Luo, Jikui (2021) Fully self-powered instantaneous wireless humidity sensing system based on triboelectric nanogenerator. Nano Energy, 83. p. 105814. ISSN 2211-2855

Xu, Ying, Curtis, Thomas, Dolfing, Jan, Wu, Yonghong and Rittmann, Bruce E. (2021) N-acyl-homoserine-lactones signaling as a critical control point for phosphorus entrapment by multi-species microbial aggregates. Water Research, 204. p. 117627. ISSN 0043-1354

Xue, Pingsheng, Liu, Qiang, Wu, Qiang and Fu, Yong Qing (2022) Sagnac mirror loop with two polarization maintaining fibers for twist measurement by tracking adjacent dips with tunable measurement range. Optics and Laser Technology, 149. p. 107877. ISSN 0030-3992

Yang, Deyu, Tao, Ran, Hou, Xianghui, Torun, Hamdi, McHale, Glen, Martin, James and Fu, Richard (2021) Nanoscale “Earthquake” Effect Induced by Thin Film Surface Acoustic Waves as a New Strategy for Ice Protection. Advanced Materials Interfaces, 8 (2). p. 2001776. ISSN 2196-7350

Yang, Liming, Shu, Chang, Chen, Zhen, Liu, Yangyang, Wang, Yan and Shen, Xiang (2021) High-order gas kinetic flux solver for simulation of two dimensional incompressible flows. Physics of Fluids, 33 (1). 017107. ISSN 1070-6631

Yang, Longzhi and Shen, Qiang (2011) Adaptive Fuzzy Interpolation. IEEE Transactions on Fuzzy Systems, 19 (6). pp. 1107-1126. ISSN 1063-6706

Yang, Tao, Chen, Wenge, Li, Xin, Song, Jiulong, Dong, Longlong and Fu, Yong Qing (2021) Environment-friendly and chromium-free passivation of copper and its alloys. Materials Today Communications, 29. p. 102826. ISSN 2352-4928

Yin, Changshuai, Wu, Jianhui, Zhou, Jian, Zhang, Dinghong, Liu, Zhijing, Liu, Xudong, Liu, Lizhu, Zhan, Zhengjia, Garner, Sean and Fu, Richard (2021) Enhancing the sensitivity of flexible acoustic wave ultraviolet photodetector with graphene-quantum-dots decorated ZnO nanowires. Sensors and Actuators A: Physical, 321. p. 112590. ISSN 0924-4247

Yuan, Yanping, Gao, Xiangkui, Wu, Hongwei, Zhang, Zujin, Cao, Xiaoling, Sun, Liangliang and Yu, Nanyang (2017) Coupled cooling method and application of latent heat thermal energy storage combined with pre-cooling of envelope: Method and model development. Energy, 119. pp. 817-833. ISSN 0360-5442

Yurduseven, Okan, Smith, Dave and Elsdon, Michael (2014) A dual-polarized solar cell stacked microstrip patch antenna with a λ/4 DC/RF isolation circuit for 5.8 GHz band WiMAX networks. Antennas and Propagation (EuCAP), 2014 8th European Conference on. pp. 1382-1385.

Zabiegaj, Dominika, Hajirasouliha, Farzaneh, Duilio, Angela, Guido, Stefano, Caserta, Sergio, Kostoglou, Margaritis, Petala, Maria, Karapantsios, Thodoris and Trybala, Anna (2021) Wetting/Spreading on Porous Media and on Deformable, Soluble Structured Substrates as a Model System for Studying the Effect of Morphology on Biofilms Wetting and for Assessing Anti-Biofilm Methods. Current Opinion in Colloid & Interface Science, 53. p. 101426. ISSN 1359-0294

Zhang, Dapeng, Du, Lifeng and Gao, Zhiwei (2021) Real-Time Parameter Identification for Forging Machine Using Reinforcement Learning. Processes, 9 (10). p. 1848. ISSN 2227-9717

Zhang, Dapeng and Gao, Zhiwei (2019) Improvement of Refrigeration Efficiency by Combining Reinforcement Learning with a Coarse Model. Processes, 7 (12). p. 967. ISSN 2227-9717

Zhang, Ning, Zhang, Hui, Schiller, Georg, Feng, Haibo, Gao, Xiaofeng, Li, Enming and Li, Xiujie (2021) Unraveling the Global Warming Mitigation Potential from Recycling Subway‐Related Excavated Soil and Rock in China Via Life Cycle Assessment. Integrated Environmental Assessment and Management, 17 (3). pp. 639-650. ISSN 1551-3777

Zhang, Qian, Wang, Yong, Tao, Ran, Torun, Hamdi, Xie, Jin, Li, Yifan, Fu, Chen, Luo, Jingting, Wu, Qiang, Ng, Wai Pang, Binns, Richard and Fu, Richard (2020) Flexible ZnO thin film acoustic wave device for gas flow rate measurement. Journal of Micromechanics and Microengineering, 30 (9). 095010. ISSN 0960-1317

Zhang, Wanjin, Lu, Ping, Qu, Zhiyuan, Zhang, Jiangshan, Wu, Qiang and Liu, Deming (2022) Large-Dynamic-Range and High-Stability Phase Demodulation Technology for Fiber-Optic Michelson Interferometric Sensors. Sensors, 22 (7). p. 2488. ISSN 1424-8220

Zhang, Zhehui, Sridhar, Sreepathy, Wei, Guoying, Yu, Yundan, Zhang, Zhongquan, Jiang, Li, Yang, Yumeng, Shahzad, Muhammad Wakil, Chen, Xue and Xu, Bin (2021) A Highly Controlled Fabrication of Porous Anodic Aluminium Oxide Surface with Versatile Features by Spatial Thermo-anodization. Surface and Coatings Technology, 408. p. 126809. ISSN 0257-8972

Zhang, Zhichao, Lu, Yiji, Wang, Yaodong, Yu, Xiaoli, Smallbone, Andrew, Dong, Chenxuan and Roskilly, Anthony Paul (2019) Comparative study of using multi-wall carbon nanotube and two different sizes of cerium oxide nanopowders as fuel additives under various diesel engine conditions. Fuel, 256. p. 115904. ISSN 0016-2361

Zhao, Weifeng, Hao, Ning, Zhang, Gai, Aijie, Ma, Chen, Weixing, Zhou, Hongwei, Yang, Dong, Xu, Bin and Kong, Jie (2020) In situ Carbon Modification of g-C3N4 from Urea Co-crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light. Chemical Research in Chinese Universities, 36 (6). pp. 1265-1271. ISSN 1005-9040

Zhao, Zhijian, Ling, Chen, Wang, Dan, Wang, Jie-Xin, Saczek, Joshua, Pramana, Stevin, Sridhar, Sreepathy, Shang, Jin, Xu, Bin, Chen, Jian-Feng and Wang, Steven (2020) Liquid Marbles in Liquid. Small, 16 (37). p. 2002802. ISSN 1613-6810

Zhou, Kai, Chen, Wenge, Yang, Yana, Li, Rong, Dong, Longlong and Fu, Yong Qing (2022) Microstructure and mechanical behavior of porous tungsten skeletons synthesized by selected laser melting. International Journal of Refractory Metals and Hard Materials, 103. p. 105769. ISSN 0263-4368

Zhu, Hao, Ao, Dongyi, Zhang, Wenting, Zhang, Ruijie, Shi, Xing, Zu, Xiaotao, Wang, Bangji, Wang, Hongyan, Fu, Richard and Tang, Yongliang (2021) Real-time monitoring of airborne molecular contamination on antireflection silica coatings using surface acoustic wave technology. Sensors and Actuators A: Physical. p. 112796. ISSN 0924-4247

Zia, Abdul Wasy and Birkett, Martin (2021) Deposition of diamond-like carbon coatings: conventional to non-conventional approaches for emerging markets. Ceramics International, 47 (20). pp. 28075-28085. ISSN 0272-8842

Zohrabian, Linnet, Hankins, Nicholas P. and Field, Robert (2020) Hybrid forward osmosis-membrane distillation system: Demonstration of technical feasibility. Journal of Water Process Engineering, 33. p. 101042. ISSN 2214-7144

Book Section

Ahmad Jamil, Muhammad, Yaqoob, Haseeb, Goraya, Talha S., Shahzad, Muhammad Wakil and Zubair, Syed M. (2022) Exergoeconomic Analysis of Energy Conversion Systems: From Fundamentals to Applications. In: Synergy Development in Renewables Assisted Multi-carrier Systems. Green Energy and Technology . Springer, Cham, Switzerland, pp. 3-21. ISBN 9783030907198, 9783030907204

Atherton, Shaun, Evans, Carl, Roach, Paul, Hughes, David, McHale, Glen and Newton, Michael (2009) Investigation of operating parameters for a semen quality analysis system. In: BIODEVICES 2009 - proceedings of the International Conference on Biomedical Electronics & Devices. INSTICC Press, Portugal, pp. 13-16. ISBN 978-9898111647

Baughan, Robert and Crapper, Martin (2016) Competence management in the UK heritage railway industry. In: Proceedings of the 32nd Annual ARCOM Conference. ARCOM, Manchester, pp. 519-528. ISBN 9780995546301

Benlloch Tinoco, Maria, Salvador, A., Rodrigo, D. and Martinez-Navarrete, N. (2015) Microwave heating technology. In: Handbook of Food Processing: Food Preservation. Taylor & Francis, pp. 297-318. ISBN 9781498721752

Borri, Antonio, Corradi, Marco and Grazini, Andrea (2006) Sull’utilizzo dei materiali FRP per il rinforzo delle strutture lignee. In: Lignea: Studi sulla conservazione e il restauro del patrimonio artistico e architettonico ligneo. Quattroemme, pp. 349-398. ISBN 9788885962897

Brandić Lipińskaa, Monika, Dade-Robertson, Martyn, Liu, Chen, Maurer, Chris, Morrow, Ruth, Senesky, Debbie G., Theodoridoua, Magdalini, Zhang, Meng and Rothschild, Lynn J. (2021) Growth as an Alternative Approach to the Construction of Extra-Terrestrial Habitats. In: IAC 2021 Congress Proceedings: 72nd International Astronautical Congress 2021: Inspire, innovate & discover for the benefit of mankind. International Astronautical Federation, IAF, Paris, p. 63597.

Caplan, Nick (2008) A simulation of outrigger canoe paddling performance. In: The Engineering of Sport 7. Springer, London, pp. 97-105. ISBN 978-2287094101

Chaal, Hamza and Jovanovic, Milutin (2010) Second order sliding mode control of a DC drive with uncertain parameters and load conditions. In: Proceedings of the 2010 Chinese Control and Decision Conference. IEEE, Piscataway, NJ, pp. 3204-3208. ISBN 978-1424451814

Chacko, Vivek, Yu, Hongnian, Cang, Shuang and Vladareanu, Luige (2014) State of the art in excavators. In: Proceedings of the 2014 International Conference on Advanced Mechatronic Systems. IEEE, pp. 481-488. ISBN 978-1-4799-6381-2

Clear, Adrian, Friday, Adrian, Hazas, Mike and Lord, Carolynne (2014) Catch my drift?: achieving comfort more sustainably in conventionally heated buildings. In: Proceedings of the 2014 conference on Designing interactive systems - DIS '14. Association for Computing Machinery, pp. 1015-1024. ISBN 978-1-4503-2902-6

Coppel, Anna, Gardner, Trevor and Caplan, Nick (2008) Numerical modeling of the flow around rowing oarblades. In: The Engineering of Sport 7. Springer, London, pp. 353-361. ISBN 978-2287094101

Costa Pereira, Carolina, Mahkamov, Khamid, Kenisarin, Murat, Ismail, Mohammad, Halimic, Elvedin, Mullen, David, Lynn, Kevin and Werner, Thomas (2018) Experimental and Numerical Study on Melting of Solar Salt in a Finned Metallic Container. In: Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition. Volume 6B: Energy. Pittsburgh, Pennsylvania, USA. November 9–15, 2018. American Society of Mechanical Engineers (ASME), New York, IMECE2018-88072. ISBN 9780791852088

Costa Pereira, Carolina, Mahkamov, Khamid, Kenisarin, Murat, Lynn, Kevin, Halimic, Elvedin and Mullen, David (2018) Solar Salt Latent Heat Thermal Storage for a Small Solar Organic Rankine Cycle Plant. In: Proceedings of the ASME 2018 12th International Conference on Energy Sustainability collocated with the ASME 2018 Power Conference and the ASME 2018 Nuclear Forum: Lake Buena Vista, Florida, USA. June 24–28, 2018. American Society of Mechanical Engineers (ASME), New York, ES2018-7326. ISBN 9780791851418

Dele-Ajayi, Opeyemi, Ayodele, Victor, Oluwafemi, Alufa, Anderson, Emma, Strachan, Becky and Emembolu, Itoro (2019) Barriers and identified solutions to the integration of digital technologies in the classroom: A case study of teachers in Nigeria. In: Proceedings of 2019 IEEE Global Engineering Education Conference (EDUCON 2019): 9-11 April, 2019, Dubai, UAE. IEEE Global Engineering Education Conference, EDUCON (10). IEEE, Piscataway, NJ, pp. 953-958. ISBN 9781538695074, 9781538695067

Dodd, Linzi, Wood, David and Gallant, Andrew (2011) Optimizing MOM diode performance via the oxidation technique. In: 2011 IEEE SENSORS Proceedings. IEEE, pp. 176-179. ISBN 978-1-4244-9290-9

Ebrahim, Hesham, Dominy, Robert and Leung, Ken (2017) Evaluation of vehicle platooning aerodynamics using bluff body wake generators and CFD. In: 2016 International Conference for Students on Applied Engineering (ISCAE): Newcastle upon Tyne, United Kingdom, 20–21 October 2016. IEEE, Piscataway, NJ, pp. 218-223. ISBN 9781467390286, 9781467390538

Ellis, Charlotte (2012) Testing and Defects. In: Keating on NEC3. Sweet & Maxwell, London, UK, pp. 123-144. ISBN 9781847033314

Gao, Bin, Yin, Aijun, Wang, Yizhe, Tian, Guiyun, Woo, Wai Lok and Liu, Hanxiao (2014) Thermography spatial-transient-stage tensor model and materal property characterization. In: 2014 IEEE Far East Forum on Nondestructive Evaluation/Testing. IEEE, pp. 199-203. ISBN 978-1-4799-4731-7

Jovanovic, Milutin and Ahmed, Mohamed Mostafa Ramadan (2007) Sensorless speed control strategy for brushless doubly-fed reluctance machines. In: Proceedings of the 2007 IEEE International Electric Machines & Drives Conference. IEEE, Piscataway, NJ, pp. 1514-1519. ISBN 978-1424407422

Latchoomun, L., Gokhool, C., Ah King, R. T. F., Busawon, Krishna and Barbot, J. P. (2019) Efficiency of VFD Coupled Induction Motors Operating in the Scalar Mode with Different Types of Loads. In: Smart and Sustainable Engineering for Next Generation Applications. Springer, pp. 45-59. ISBN 978-3-030-18239-7

Latchoomun, L., Mawooa, Deoduth, Ah King, Robert, Busawon, Krishna and Binns, Richard (2017) Quantifying the Pumping Energy Loss Associated with Different Types of Leak in a Piping System. In: Emerging Trends in Electrical, Electronic and Communications Engineering. Lecture Notes in Electrical Engineering, 416 . Springer, London, pp. 107-118. ISBN 978-3-319-52170-1

Latchooomun, L., Sockalingum, T., Poulle, K. Virasamy, King, R. T. F. Ah, Busawon, Krishna and Barbot, J. P. (2019) Design of a Water Pressure Boosting System for Pressure-Driven Demand in a Distribution Network. In: 2018 5th International Symposium on Environment-Friendly Energies and Applications (EFEA). IEEE. ISBN 978-1-5386-5518-4

Liu, Pengcheng, Yu, Hongnian and Cang, Shuang (2014) Modelling and control of an elastically joint-actuated cart-pole underactuated system. In: 2014 20th International Conference on Automation and Computing. IEEE, pp. 26-31. ISBN 978-1-9095-2202-2

Liu, Pengcheng, Yu, Hongnian and Cang, Shuang (2016) Modelling and dynamic analysis of underactuated capsule systems with friction-induced hysteresis. In: 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS). IEEE, pp. 549-554. ISBN 978-1-5090-3763-6

Lopez, Isbelis, Leung, Ken, Inam, Fawad, Till, Clare and Paulsen, Andreas (2017) Mechanical characterization of protective coatings for offshore wind turbine towers and transition pieces. In: 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 303-307. ISBN 978-1-4673-9028-6

Malik, Faheem Ahmed, Bell, Margaret, Dala, Laurent and Busawon, Krishna (2021) Modelling transport emission of an out of town centre to achieve emission reduction targets. In: 2021 6th International Symposium on Environment-Friendly Energies and Applications (EFEA). IEEE International Symposium on Environment Friendly Energies and Applications (EFEA), 1 . IEEE, Piscataway, p. 9406268. ISBN 9781728170121, 9781728170114, 9781728170107

McGibbney, Lewis and Kumar, Bimal (2015) A Framework for Regulatory Ontology Construction within AEC Domain. In: Ontology in the AEC Industry. American Society of Civil Engineers, pp. 193-215. ISBN 9780784413906

Meinke, Robin-Joshua, Sun, Hongjian and Jiang, Jing (2020) Optimising Demand and Bid Matching in a Peer-to-Peer Energy Trading Model. In: ICC 2020 - 2020 IEEE International Conference on Communications (ICC). IEEE, Piscataway, pp. 1-6. ISBN 9781728150901, 9781728150895

Meng, Han, Chronopoulos, Dimitrios and Fabro, Adriano (2019) A Rainbow Metamaterial For Broadband Multi-frequency Vibration Suppression. In: INTER-NOISE and NOISE-CON Congress and Conference Proceedings: InterNoise19. INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 2995-3 . Institute of Noise Control Engineering, United States, pp. 2995-3992.

Meng, Han, Chronopoulos, Dimitrios, Fabro, Adriano, Elmadih, Waiel and Leach, Richard (2020) Optimal design of rainbow metamaterials. In: MEDYNA2020, 3rd Euro-Mediterranean Conference on Structural Dynamics and Vibroacoustics. UNSPECIFIED.

Myagkov, L. L., Mahkamov, Khamid, Chainov, N. D. and Makhkamova, Irina (2014) Advanced and conventional internal combustion engine materials. In: Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance. Elsevier, 370-408e. ISBN 9780857095220

Narayana, Mahinsasa and Putrus, Ghanim (2010) Optimal control of wind turbine using neural networks. In: Proceedings of the 45th International Universities Power Engineering Conference (UPEC). IEEE, Piscataway, NJ, pp. 1-5. ISBN 978-1424476671

Nwofe, Patrick, Ramakrishna Reddy, Kotte and Miles, Robert (2013) Influence of deposition time on the properties of highly-oriented SnS thin films prepared using the thermal evaporation method. In: Progress in Materials and Processes. Advanced Materials Research, 602 . Trans Tech Publications, Durnten-Zurich, Switzerland, pp. 1409-1412. ISBN 9783037855430

Paudel, Rupak, Ghassemlooy, Zabih, Le Minh, Hoa, Rajbhandari, Sujan and Livingstone, Bryan (2011) Investigation of FSO ground-to-train communications in a laboratory environment. In: Proceedings of the 2011 Second Asian Himalayas International Conference on Internet (AH-ICI). IEEE, Piscataway, NJ, pp. 1-5. ISBN 978-1457710872

Pearsall, Nicola and Gottschalg, Ralph (2012) Performance Monitoring. In: Comprehensive Renewable Energy. Elsevier, London. ISBN 978-0080878720

Penlington, Roger, Clark, Robin, Tudor, Jenna, Willmot, Peter, Willis, Liz and Clifford, Mike (2011) Engineering Education Research - the UK perspective at a time of change. In: Proceedings of the SEFI Annual Conference, 1st World EE Flash Week: Global Engineering Recognition, Sustainability and Mobility. European Society for Engineering Education (SEFI), Brussels. ISBN 9782873520045

Piper, William, Sun, Hongjian and Jiang, Jing (2022) Digital Twins for Smart Cities: Case Study and Visualisation via Mixed Reality. In: 2022 IEEE 95th Vehicular Technology Conference: (VTC2022-Spring). IEEE, Piscataway, US. (In Press)

Prieto, Pablo, Wright, David and Qin, Sheng-feng (2003) A novel updating modelling methodology for free-form surface modifications in the early stages of design. In: Proceedings of ICED 03, the 14th International Conference on Engineering Design, Stockholm. Design Society, pp. 133-134. ISBN 9781904670001

Putrus, Ghanim (2007) Power electronics application in distribution networks. In: Proceedings of the 2007 14th Institution of Engineering and Technology International School on High Voltage Engineering and Testing. High Voltage Engineering and Testing, 2007 14th Institution of Engineering and Technology International School on . IET, Stevenage, UK, pp. 67-98. ISBN 978-0863418198

Ramakrishna Reddy, Kotte, Prathap, Pathi and Miles, Robert (2010) Thin Films of Tin Sulphide for Application in Photovoltaic Solar Cells. In: Photovoltaics: Developments, Applications and Impact. Energy Science, Engineering and Technology . Nova Science Publishers, New York, pp. 37-62. ISBN 978-1608760220

Rathnasinghe, Akila, Weerasinghe, L., Abeynayake, M. and Kulatunga, U. (2020) The evolution of information flows in construction projects: a contemporary study on the embracing of Augmented Reality. In: Imaginable Futures: Design Thinking, and the Scientific Method: 54th International Conference of the Architectural Science Association 2020. Architectural Science Association (ANZAScA), Auckland, New Zealand, pp. 1105-1114. ISBN 9780992383572

Rigatos, Gerasimos and Busawon, Krishna (2018) Flexible-Link Robots. In: Robotic Manipulators and Vehicles. Springer, pp. 271-300. ISBN 978-3-319-77850-1

Rigatos, Gerasimos and Busawon, Krishna (2018) Four-Wheel Autonomous Ground Vehicles. In: Robotic Manipulators and Vehicles. Springer, pp. 391-467. ISBN 978-3-319-77850-1

Rigatos, Gerasimos, Busawon, Krishna, Wira, Patrice and Abbaszadeh, Masoud (2018) Nonlinear Optimal Control of the UAV and Suspended Payload System. In: IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society. IEEE, pp. 3776-3781. ISBN 978-1-5090-6685-8

Ruan, Jian and Qin, Sheng-feng (2011) Modeling a constraint-based Design Risk Management tool: An empirical study for collaborative product design. In: Proceedings of the 2011 IEEE International Conference on Industrial Engineering and Engineering Management. IEEE, Piscataway, NJ, pp. 974-978. ISBN 9781457707407

Saghar, Kashif, Henderson, William, Kendall, David and Bouridane, Ahmed (2010) Formal modelling of a robust wireless sensor network routing protocol. In: 2010 NASA/ESA Conference on Adaptive Hardware and Systems (AHS). IEEE, Piscataway, NJ, pp. 281-288. ISBN 978-1-4244-5887-5

Schmueser, Ilka, Blair, Ewen O., Isiksacan, Ziya, Li, Yifan, Corrigan, Damion K., Stokes, Adam A., Terry, Jonathan G., Mount, Andrew R. and Walton, Anthony J. (2020) Test structure and measurement system for characterising the electrochemical performance of nanoelectrode structures. In: 2020 IEEE 33rd International Conference on Microelectronic Test Structures (ICMTS). IEEE, Piscataway, NJ, pp. 1-6. ISBN 9781728140087

Scragg, Jonathan, Wolverson, Daniel, Zoppi, Guillaume and Peter, Laurence (2010) Optimizing sulfurisation conditions in the fabrication of Cu2ZnSnS4 absorber layers from electroplated precursors. In: Proceedings of the Photovoltaic materials and manufacturing issues II. Materials Research Society symposia proceedings . Materials Research Society, Warrendale, PA, USA. ISBN 978-1605111834

Solano, B. P., Gallant, Andrew and Wood, David (2009) Design and Optimisation of a Microgripper: Demonstration of Biomedical Applications Using the Manipulation of Oocytes. In: Design, Test, Integration & Packaging of MEMS/MOEMS, 2009. MEMS/MOEMS '09. Symposium on. IEEE, pp. 61-65. ISBN 978-1-4244-3874-7

Tian, Kai, Markkula, Gustav, Wei, Chongfeng and Romano, Richard (2020) Creating Kinematics-dependent Pedestrian Crossing Willingness Model When Interacting with Approaching Vehicle. In: 2020 IEEE 23rd International Conference on Intelligent Transportation Systems (ITSC 2020). IEEE, Piscataway, pp. 833-838. ISBN 9781728141503, 9781728141497

Underwood, Chris (2016) Heat pump modelling. In: Advances in Ground-Source Heat Pump Systems. Elsevier, Duxford, pp. 387-421. ISBN 978-0-08-100311-4

Wang, Shuo, Wang, Xin and Woo, Wai Lok (2017) Numerical green water assessment for an FPSO with consideration of nonlinear effects from bilge keel, spread mooring and asymmetric risers. In: Proceedings of the 27th International Ocean and Polar Engineering Conference, ISOPE 2017. Society of Petroleum Engineers (SPE), pp. 181-188. ISBN 9781880653975

Wei, Chongfeng, Romano, Richard, Merat, Natasha, Hajiseyedjavadi, Foroogh, Solernou, Albert, Paschalidis, Evangelos and Boer, Erwin R. (2020) Achieving Driving Comfort of AVs by Combined Longitudinal and Lateral Motion Control. In: Advances in Dynamics of Vehicles on Roads and Tracks. Lecture Notes in Mechanical Engineering . Springer, pp. 1107-1113. ISBN 9783030380762

Yahya, Elssawi, Ding, Guo Fu and Qin, Sheng-feng (2014) Sensitivity Analysis and Optimization of Machining Parameters Based on Surface Roughness Prediction for AA6061. In: Applied Mechanics and Materials. Trans Tech Publications, pp. 181-188. ISBN 9783038351795

Zhang, Juncheng, Li, Quanfeng, Chang, Xiang, Chao, Fei, Lin, Chih-Min, Yang, Longzhi, Huynh, Tuan Tu, Zheng, Ling, Zhou, Changle and Shang, Changjing (2020) A Novel Self-Organizing Emotional CMAC Network for Robotic Control*. In: 2020 International Joint Conference on Neural Networks (IJCNN): 2020 - conference proceedings. Proceedings of the International Joint Conference on Neural Networks . IEEE, Piscataway, pp. 1-6. ISBN 9781728169279, 9781728169262

Zhang, Pin, Gao, Bo, Yiang, Weiyi and Qin, Sheng-feng (2010) Requirement study of telemedicine system and product. In: 2010 3rd International Conference on Biomedical Engineering and Informatics. IEEE, Piscataway, NJ, pp. 1906-1909. ISBN 9781424464951

Conference or Workshop Item

Abd El Aziz, Ahmad, Ng, Wai Pang, Ghassemlooy, Zabih, Aly, Moustafa, Ngah, Razali and Chaing, Ming Feng (2009) The effect of the input energy on the SOA gain with non-uniform biasing. In: 14th European Conference on Networks and Optical Communications (NOC/OC&I 2009), 10-12 June 2009, Valladolid, Spain..

Ali, Salem, Pearsall, Nicola and Putrus, Ghanim (2012) Impact assessment of high penetrations of grid-connected photovoltaic (PV) system on the low voltage distribution network. In: PVSAT-8: 8th Photovoltaic Science, Applications and Technology Conference, 2-4 April 2012, Newcastle upon Tyne, UK.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) A Design Environment for Product Knowledge Management and Data Exchange. In: CIRP Design Seminar 2003, 11th - 14th May 2003, Grenoble, France.

Aziz, Hayder, Gao, James, Maropoulos, Paul and Cheung, Wai Ming (2003) New Technologies and Standards for Design Knowledge Management in Collaborative Conceptual Design. In: ICE 2003 - 9th International Conference of Concurrent Enterprising, 16th - 18th June 2003, Espoo, Finland.

Beltran, Marta, Morant, Maria, Perez Soler, Joaquin and Llorente, Roberto (2009) Performance evaluation of OFDM and impulse-radio ultra-wideband over fiber distribution for in-building networks. In: 2009 IEEE International Conference on Ultra-Wideband, 9-11 September 2009, Vancouver, Canada.

Chaal, Hamza and Jovanovic, Milutin (2010) Direct power control of brushless doubly-fed reluctance machines. In: 5th IET International COnference on Power Electronics, Machines and Drives (PEMD), 19-21 April 2010, Brighton, UK.

Chaal, Hamza and Jovanovic, Milutin (2010) A new sensorless torque and reactive power controller for doubly-fed machines. In: XIX International Conference on Electrical Machines (ICEM), 6-8 September 2010, Rome, Italy.

Christodoulakis, G., Busawon, Krishna, Caplan, Nick and Stewart, Su (2010) On the filtering and smoothing of biomechanical data. In: Communication Systems networks and Digital Signal processing (CSNDSP) 2010, 21-23 July 2010, Newcastle Upon Tyne, United Kingdom.

Cresciani, Manuel (2008) The Olympic buildings as a new typology for architects and engineers. In: International Association for Shell and Spatial Structures (IASS) Symposium 2008, 27 - 31 Oct 2008, Acapulco, Mexico.

Dade-Robertson, Martyn, Rodriguez Corral, R., Guyet, A., Mitrani, Helen, Wipat, Anil and Zhang, Meng (2017) Synthetic Biological Construction: Beyond ‘bioinspired’ in the design of new materials and fabrication systems. In: 3rd International Conference Biodigital: Architecture & Genetics, 7th - 10th June 2017, Barcelona.

Don, Eric and Forbes, Ian (2012) The majority carrier electrical properties of selected thin film polycristalline solar cell window and absorber layers are determined by the method of four coefficients. In: PVSAT-8: 8th Photovoltaic Science, Applications and Technology Conference, 2-4 April 2012, Newcastle upon Tyne, UK.

Fitzgerald, Ian (2011) Organising migrant workers locally: British Jobs for British Workers? In: Posted workers in Europe Seminar, 25 February 2011, University of Westminster, UK.

Fong, Joshua, Underwood, Chris, Edge, Jerry, Tindale, Andy and Potter, Steve (2012) Modelling of heat emitters embedded within third order lumped parameter building envelope model. In: BSO12.ORG Building Simulation and Optimization: First IBPSA-England Conference, 10-11 September 2012, Loughborough, UK.

Ghassemlooy, Zabih, Le Minh, Hoa, Rajbhandari, Sujan, Perez Soler, Joaquin and Ijaz, Muhammad (2010) Experimental measurement of atmospheric effects on free-space optics communications in a controlled environment. In: COST Action IC0802: Propagation tools and data for integrated telecommunications, navigation and earth observation systems, MCM 4, 8 - 9 November, 2010, Erice, Sicily.

Ghassemlooy, Zabih, Rajbhandari, Sujan, Ijaz, Muhammad, Adebanjo, Olusegun and Ansari, S. (2010) Experimental comparison of different modulation schemes for free-space optics communication in the presence of turbulence in a controlled environment. In: EU COST Action IC0802 Propagation Tools and Data for Integrated Telecommunication, Navigation and Earth Observation Systems Meeting, MCM 3, 26 - 28 April 2010, Athens, Greece.

Giannakis, Iraklis, Giannopoulos, Antonios and Warren, Craig (2018) A Fast GPR Numerical Model Based on Machine Learning with Application to Full Waveform Inversion. In: 24th European Meeting of Environmental and Engineering Geophysics: Near Surface Geoscience Conference & Exhibition 2018, 9-13 September 2018, Porto.

Giannakis, Iraklis, Warren, Craig, Giannopoulos, Antonios and Sofroniou, Anastasia (2021) Fractal-Based Orthonormal Basis for Compressing and Reducing the Dimensionality of Full-Waveform Inversion for Hydrogeological Applications Using Ground-Penetrating Radar. In: EGU General Assembly 2021: Gather Online, 19th April - 30th April 2021.

Henriques, Diogo Pereira (2017) Asking the right questions in an age of uncertainty: what if energy was free of charge? In: LoLo Student Conference 2017, 13th June 2017, Loughborough, UK.

Hojo, M., Fukuoka, Y., Funabashi, Toshihisa and Putrus, Ghanim (2010) Simplified power quality conditioner for dynamic voltage restoration and fault current limitation. In: 10th International Conference on Developments in Power SystemProtection DPSP 2010, 29 March - 1 April 2010, Manchester, UK.

Ijaz, Muhammad, Ansari, S., Ghassemlooy, Zabih, Rajbhandari, Sujan, Le Minh, Hoa, Gholami, Asghar and Leitgeb, Erich (2010) Experimental investigation of the performance of OOK-NRZ and RZ modulation techniques under controlled turbulence channel in FSO Systems. In: The 11th Annual Post Graduate Symposium on the Convergence of Telecommunications, Networking and Broadcasting (PGNet 2010), 21 - 22 June 2010, Liverpool, UK.

Ijaz, Muhammad, Ghassemlooy, Zabih, Le Minh, Hoa and Rajbhandari, Sujan (2010) All optical fog-sensor for determining the fog visibility range in optical wireless communication links. In: London Communications Symposium : Nanotechnology and Electronic Materials Symposium Photonics London (LENS 2010), 10 September 2010, University College London.

Ijaz, Muhammad, Wu, Shan, Fan, Z., Popoola, Wasiu Oyewole and Ghassemlooy, Zabih (2009) Study of the atmospheric turbulence in free space optical communications. In: 10th Annual Graduate Symposium: On the Convergence of Telecommuniations, Networking and Broadcasting, 22-23 June 2010, Liverpool, United Kingdom.

Inam, Fawad (2018) Carbon nanotube reinforced thermoplastic nanocomposites with superior production economics for oil/ gas applications. In: International Conference on Materials Science and Graphene Technology 2018, April 9-11, 2018, Dubai, UAE.

Jiang, Yuanyuan, Foti, Steve and Sambell, Alistair (2009) A novel louvered array element geometry and spatial filter / "ray-bending" lens for a low profile satellite communications on-the-move hybrid phased array antenna. In: 10th Annual Graduate Symposium on the Convergence of Telecommunications, Networking and Broadcasting (PGNET09), 22-23 June 2009, Holiday Inn, Liverpool, UK.

Jiang, Yuanyuan, Foti, Steve, Sambell, Alistair and Smith, Dave (2009) A new low profile antenna with improved performance for satellite on-the-move communications. In: 3rd IEEE International Symposium on Microwave Antenna, Propagation and EMC Technologies for Wireless Communications, 27-29 October 2009, Jingyan Hotel, Beijing, China.

Kapsali, Veronika, Toomey, Anne, Oliver, Raymond and Tandler, Lynn (2013) Biomimetic spatial and temporal (4D) design and fabrication. In: Living Machines 2013, 29 July - 02 August 2013, London.

Karmacharya, Samir, Putrus, Ghanim, Underwood, Chris and Mahkamov, Khamid (2012) Evaluation of domestic electrical demand and its effect on low voltage network performance. In: 47th Universities' Power Engineering Conference (UPEC 2012), 4-7 September 2012, Brunel University, London, UK.

Karmacharya, Samir, Putrus, Ghanim, Underwood, Chris and Mahkamov, Khamid (2012) Thermal modelling of the building and its HVAC system using Matlab/Simulink. In: EFEA 2012: 2nd International Symposium on Environment Friendly Energies and Applications, 25-27 July 2012, Northumbria University, Newcastle upon Tyne, UK.

Kerr, Murray, Turner, Matthew and Postlethwaite, Ian (2010) Robust anti-windup control of SISO systems. In: American Control Conference (ACC) 2010, 30 June-2 July 2010, Baltimore, Maryland.

Kharel, Rupak, Busawon, Krishna and Ghassemlooy, Zabih (2010) Indirectly coupled synchronization of chaotic systems: application to secure digital communications. In: 28th International Colloquium on Group - Theoretical Methods in Physics, 26 - 30 July 2010, Newcastle upon Tyne, UK.

Kharel, Rupak, Busawon, Krishna and Ghassemlooy, Zabih (2010) Modified chaotic shift keying using indirect coupled chaotic synchronization for secure digital communication. In: 3rd Chaotic Modeling and Simulation International Conference (CHAOS 2010), 1 - 4 June 2010, Crete, Greece.

Kolo, Shaba James, Rahimian, Farzad Pour and Goulding, Jack (2014) Housing delivery in Nigeria and the opportunity for offsite manufacturing. In: CCC 2014 - Creative Construction Conference 2014, 21st - 24th June 2014, Prague, Czech Republic.

Kolo, Shaba James, Rahimian, Farzad Pour and Goulding, Jack (2015) Housing stakeholders' perspective on offsite manufacturing in Nigeria. In: Construct15 - 23rd Global Lean Construction Conference, 28th - 31st July 2015, Perth, Australia.

Le Minh, Hoa, Ghassemlooy, Zabih, Ijaz, Muhammad, Rajbhandari, Sujan, Adebanjo, Olusegun, Ansari, S. and Leitgeb, Erich (2010) Experimental study of bit error rate of free space optics communications in laboratory controlled turbulence. In: IEEE Globecom 2010 Workshop on Optical Wireless Communications, 6-10 December 2010, Miami, Florida, USA.

Le Minh, Hoa, Ghassemlooy, Zabih, O'Brien, Dominic and Faulkner, Grahame (2010) Indoor gigabit optical wireless communications: challenges and possibilities. In: The 12th International Conference on Transparent Optical Networks (ICTON), 27 June- 1 July 2010, Bavarian Academy of Sciences and Humanities, Munich, Germany.

Le Minh, Hoa, O'Brien, Dominic and Faulkner, Grahame (2010) A gigabit/s indoor optical wireless system for Home Access Networks. In: 7th International Symposium on Communication Systems Networks and Digital Signal processing (CSNDSP), 21-23 July 2010, Northumbria University, Newcastle upon Tyne.

Leitgeb, Erich, Awan, Muhammad, Brandl, P., Capsoni, Carlo, Nebuloni, R., Javornik, Tomaz, Kandus, Gorazd, Sheikh Muhammed, S. and Ghassemlooy, Zabih (2009) Current optical technologies for wireless access. In: 10th International Conference on Telecommunications (ConTEL 2009), 8-10 June 2009, Zagreb, Croatia.

Longstaff, Doug and Johansen, Eric (2009) Mobile phones in project management: The pendulum of professionalism. In: ARCOM 25th Annual Conference, 7th - 9th September 2009, Nottingham, UK.

Lu, Qing, Korolkiewicz, Edward, Danaher, Sean, Ghassemlooy, Zabih and Sambell, Alistair (2009) Optimum design of a probe fed dual frequency patch antenna using genetic algorithm. In: Proceedings of the ARMMS RF and Microwave Society, 20-21 April 2010, Rockingham Forest Hotel, Corby, UK.

Luckert, Franziska, Yakushev, Michael, Martin, Robert, Beattie, Neil, Zoppi, Guillaume, Moynihan, Matthew and Forbes, Ian (2010) Optical properties of thin films of Cu2ZnSnSe4 fabricated by sequential deposition and selenisation. In: 6th Photovoltaic Science Applications and Technology (PVSAT-6), 1-3 April 2010, University of Southampton, United Kingdom.

Maramizonouz, Sadaf, Rahmati, Mohammad, Jia, Changfeng, Zheng, Tengfei and Fu, Richard (2021) Microparticle Patterning inside Capillary Tubes on Bendable Thin Film SAW Devices. In: Acoustofluidics 2021, 26th - 27th August 2021, Online.

Narayana, Mahinsasa, Putrus, Ghanim and Jovanovic, Milutin (2010) Optimal controls of wind turbine by considering linear prediction of wind speeds. In: 14th International Power Electronics and Motion Control Conference (EPE/PEMC 2010), 6-8 September 2010, Ohrid, Macedonia.

Ng, Bobo, Tindall, Jess, Edge, Jerry, Morrell, Joe, Tioh, D., Choi, K., Du, Hu, Wei, Shen, Waggott, A., Barber, A., Keating, M., Walker, Sara and Qian, Zi (2018) Refurbishment options to decarbonise a 1960s public office building by 2050s. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Ng, Wai Pang, Loedhammacakra, Wisit, Cryan, Bob and Ghassemlooy, Zabih (2010) Chromatic dispersion compensation employing cascaded parallel optical all-pass filter. In: 7th International Symposium on Communication Systems Networks and Digital Signal processing (CSNDSP), 21-23 July 2010, Northumbria University, Newcastle upon Tyne.

Nwofe, Patrick, Ramakrishna Reddy, Kotte, Tan, Kian, Forbes, Ian, Leach, Mark, Jang, Dongyoung and Miles, Robert (2012) Investigating the potential of SnS for use in photovoltaic solar cell applications. In: PVSAT-8: 8th Photovoltaic Science, Applications and Technology Conference, 2-4 April 2012, Newcastle upon Tyne, UK.

Oliver, Stephen and Rahimian, Farzad Pour (2018) Are computers agents? Considering the implication of classifying computers as occupants on energy consumption and proximity-asutility equipment scheduling. In: Creative Construction Conference 2018, 30th June - 3rd July 2018, Ljublana, Slovenia.

Paudel, Rupak, Le Minh, Hoa, Ghassemlooy, Zabih, Iaz, M. and Rajbhandari, Sujan (2010) High speed train communications systems using free space optics. In: IET Railway Young Professionals Best Paper Competition, 5 October 2010, The Medical Society, London, UK.

Pearsall, Nicola (2011) PV Research and Development in Europe - A view from the Technology Platform. In: 37th IEEE Photovoltaic Specialists Conference, 19-24 June 2011, Seattle, USA.

Pearsall, Nicola, Atanasiu, Bogdan and Zdanowicz, Tadeusz (2008) Progress on the modernisation of the European PV system monitoring guidelines. In: 23rd European Photovoltaic Solar Energy Conference, 1-5 September 2008, Valencia, Spain.

Penlington, Roger and Tudor, Jenna (2009) Dual use of feedback – formative and evaluative. In: SEFI 2009: 37th Annual Conference, 1-4 July 2009, Rotterdam, The Netherlands.

Peyret, Remy, Bouridane, Ahmed, Al-Maadeed, Somaya, Kunhoth, Suchithra and Khelifi, Fouad (2015) Texture analysis for colorectal tumour biopsies using multispectral imagery. In: 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2015 ), 25 - 29 August 2015, Milan.

Rajbhandari, Sujan, Ghassemlooy, Zabih and Angelova, Maia (2009) The efficient denoising artificial light interference using discrete wavelet transform with application to indoor optical wireless system. In: 10th International Symposium on Communication Theory and Applications (ISCTA 09), 13-17 July 2009, St. Martins College, Ambleside, UK.

Shahzad, Muhammad Wakil, Ybyraiymkul, Doskhan, Burhan, Muhammad, Oh, Seung Jin and Ng, Kim Choon (2019) An innovative pressure swing adsorption cycle. In: 10th International Meeting of Advances in Thermofluids - Smart City: Advances in Thermofluid Technology in Tropical Urban Development, IMAT 2018, 16/11/18 - 17/11/18, Kuta, Bali, Indonesia.

Strachan, Rebecca, Peixoto, Aruquia, de los Angeles Martinez, Maria, González González, Carina Soledad, Plaza, Pedro, Blazquez, Manuel and Castro, Manuel (2018) Diversity and Inclusion in Engineering Education: Looking Through the Gender Question. In: EDUCON2018 – IEEE Global Engineering Education Conference, 18th - 20th April 2018, Santa Cruz de Tenerife, Spain.

Strachan, Rebecca, Stonehouse, Jane, Dele-Ajayi, Opeyemi, Poolan, Tim, Bell, Richard, Blakelock, Linda, Logan, Steve and Emembolu, Itoro (2019) Changing Culture and Challenging Stereotypes: Lets Build Bridges and Diversify! In: Advance HE STEM Teaching and Learning Conference 2019: Delivering Next Generation Higher Education in STEM, 30-31 January 2019, Birmingham.

Tang, Xuan, Rajbhandari, Sujan, Popoola, Wasiu Oyewole, Ghassemlooy, Zabih, Muhammad, Sajid Sheikh, Leitgeb, Erich and Kandus, Gorazd (2010) Performance of BPSK subcarrier intensity modulation free-space optical communications using a log-normal atmospheric turbulence model. In: Symposium on Photonics and Optoelectronics (SOPO), 19-21 June 2010, Chengdu, China.

Uslan, Volkan and Seker, Huseyin (2015) The quantitative prediction of HLA-B*2705 peptide binding affinities using Support Vector Regression to gain insights into its role for the Spondyloarthropathies. In: 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC 2015 ), 25 - 29 August 2015, Milan.

Vahidi, Ramesh and Greenwood, David (2009) Triangles, tradeoffs and success: A critical examination of some traditional project management paradigms. In: CIB Joint International Symposium 2009-Construction Facing Worldwide Challenges, 27 September - 1 October 2009, Dubrovnik.

Walker, Sara (2013) Urban Electricity Systems: A UK Case Study. In: Architectural Engineering Conference, 3 - 5 April 2013, Penn State University, State College, PA.

Walton, Tim, Evans, Michael, Melchior, Frank and Kirk, David (2017) Combining preference ratings with sensory profiling for the comparison of audio reproduction systems. In: Audio Engineering Society 142nd Convention, 20-23 May 2017, Berlin.

Wei, Shen, Yong, Junfeng, Ng, Bobo, Tindall, Jess, Lu, Qin and Du, Hu (2018) Occupant Adaptive Behaviour: an Effective Method towards Energy Efficient Buildings. In: CIBSE Technical Symposium 2018 - Stretching the Envelope, 12-13 April 2018, London, UK.

Wu, Shuwei and Udeaja, Chika (2008) Developing a framework for measuring collaborative working and project performance. In: ARCOM 24th Annual Conference, 1st - 3rd September 2008, Cardiff, UK.

Xiao, Xiang, Gao, Bin, Woo, Wai Lok, Tian, Gui-Yun and Gu, Jun (2018) Spatial-Time-Step Features Fusion Algorithm in Eddy Current Pulsed Thermography. In: FENDT 2017 - 2017 Far East NDT New Technology & Application Forum, 22nd - 26th June 2017, Xi’an, China.

Xu, Ben and Hayward, Ryan (2013) Low voltage switching of crease patterns on gel surfaces with topographically patterned microelectrodes. In: APS March Meeting 2013, 18-23 March 2013, Baltimore, USA.

Yurduseven, Okan and Yurduseven, Ozan (2011) Compact parabolic reflector antenna design with cosecant-squared radiation pattern. In: Microwaves, Radar and Remote Sensing Symposium (MRRS), Kiev, Ukraine, 25-27 August 2011.

Zhai, Guiying, Ren, Fu, Zhang, Guangxia and Evison, Martin (2011) Facial shape analysis based on Euclidean distance matrix analysis. In: 4th International Conference on Biomedical Engineering and Informatics (BMEI), 15-17 October 2011, Shanghai, China.

Book

Batino, Sabrina, Corradi, L., Corradi, Marco, Corradi, Sandro, Marchetti, M., Rasimelli, I. and Tortoreto, M. (2003) Il traffico sull’antica via Flaminia. Thyrus.

Borri, Antonio, Corradi, Marco and Vignoli, Andrea (2002) Ricerche per la ricostruzione: Iniziative a carattere tecnico e scientifico a supporto della ricostruzione. DEI.

Burhan, Muhammad, Shahzad, Muhammad Wakil and Ng, Kim Choon (2019) Concentrated Photovoltaic (CPV): From Deserts to Rooftops. Springer, Cham, pp. 93-111. ISBN 9783030056353, 9783030056360

Liyanage, Lalith (2010) From traditional to technology-based tertiary education in Sri Lanka : perceptions of online learning stakeholders of National Online Distance Education Service (NODES) in Sri Lanka. LAP Lambert Academic Publishing, Saarbrücken. ISBN 9783843358644

Penlington, Roger and Steiner, Simon (2010) An introduction to sustainable development in the Engineering curriculum. Higher Education Academy, York. ISBN 9781904804970

Thesis

Amiri, Seyedeh Maryam (2010) Coding of digital pulse interval modulation in indoor optical communication systems. Masters thesis, Northumbria University.

Bhagavathy, Sivapriya (2017) Investigation of technical barriers and solutions for high penetration of photovoltaic systems in the UK. Doctoral thesis, Northumbria University.

Boyacioglu, Serife Ece (2024) A digitally-driven system for visualising the forensic delay analysis of construction projects. Doctoral thesis, Northumbria University.

Das, Ridoy (2020) Multi-objective Smart Charge Control of Electric Vehicles. Doctoral thesis, Northumbria University.

Ebrahim, Hesham (2019) The Aerodynamic Characteristics of Passenger Vehicles Operating in a Platoon. Doctoral thesis, Northumbria University.

Hafez, Hisham Tarek (2021) Developing ECO2: a performance based ecological and economic framework and tool for sustainability assessment of concrete. Doctoral thesis, Northumbria University.

Ikegwuru, Okachi (2016) Integrated performance-reliability optimisation of systems with multi-level redundancies. Doctoral thesis, Northumbria University.

Inman, Ian (2004) Compacted oxide layer formation under conditions of limited debris retention at the wear interface during high temperature sliding wear of superalloys. Doctoral thesis, Northumbria University.

Lee, Sin Keng (2007) The application of the segmentation method in the design of compact single-feed circularly and linearly polarised microstrip patch antennas. Doctoral thesis, Northumbria University.

Malik, Faheem Ahmed (2021) AI-based cyclist safety hybrid modelling for future transport network. Doctoral thesis, Northumbria University.

Misti, Siti Nabilah (2016) Development of a precision trimming process for manganin shunt resistors. Doctoral thesis, Northumbria University.

Odofin, Sarah (2016) Robust fault diagnosis by GA optimisation with applications to wind turbine systems and induction motors. Doctoral thesis, Northumbria University.

Paramasivam, Sivajothi (2016) Investigating university-industry partnership of higher engineering education using cause-effect analysis and multi-criteria decision making: A Malaysian perspective. Doctoral thesis, Northumbria University.

Parkin, Neil (2020) An investigation into the influence of trust on the sharing of practical knowledge in technology producing small to medium enterprises (smes). Doctoral thesis, Northumbria University.

Perera, Kurugamage Dilini Nuwanthika (2022) Fire performance of affordable and high quality steel modular building systems. Doctoral thesis, Northumbria University.

Rahimilarki, Reihane (2021) Fault Diagnosis for Wind Turbine Systems by Using Neural Network and Deep Learning Techniques. Doctoral thesis, Northumbria University.

Rasheed, Aatif (2016) Multi-Layer-Graphene-Nanoclay-Epoxy Nanocomposites – Theory and Experimentation. Doctoral thesis, Northumbria University.

Saharudin, Mohd (2017) Mechanical properties of polyester nano-composites exposed to liquid media. Doctoral thesis, Northumbria University.

Sridhar, Sreepathy (2020) Nature inspired surface/interface engineering towards advanced device applications. Doctoral thesis, Northumbria University.

Tang, Xuan (2012) Polarisation shift keying modulated free-space optical communication systems. Doctoral thesis, Northumbria University.

Tingey, David (2007) Estimation and control of some classes of dynamical systems with application to biological wastewater treatment. Doctoral thesis, Northumbria University.

Tookanlou, Mahsa Bagheri (2022) Optimal day-ahead scheduling frameworks for e-mobility ecosystem operation with drivers preferences under uncertainties. Doctoral thesis, Northumbria University.

Trinh, Luan (2017) Behaviours of functionally graded sandwich micro-beams and plates. Doctoral thesis, Northumbria University.

Veledar, Omar (2007) Development of nanosecond range light sources for calibration of astroparticle cherenkov detectors. Doctoral thesis, Northumbria University.

Wang, Ding (2019) Mechanics study and application of micro-engineered smart surface. Doctoral thesis, Northumbria University.

Wei, Jiacheng (2017) Graphene in epoxy system: Dispersion, preparation and reinforcement effect. Doctoral thesis, Northumbria University.

Weirs, John (2021) From student to young professional: Exploring the impact of work-based placements on the transformation of undergraduate construction students. Doctoral thesis, Northumbria University.

Yu, Jian (2004) Direct torque control of brushless doubly-fed reluctance machines. Doctoral thesis, Northumbria University.

Ziedabozied, Eman (2021) A Classification of Informal Settlements in Cairo, Egypt. Doctoral thesis, Northumbria University.

Patent

Bogazici Universitesi (2017) Atomic force microscope integrated with a multiple degrees-of-freedom magnetic actuator. US2016266107 (A1).

Broadcast

Kapsali, Veronika (2013) Inventing clothing inspired by nature. [Broadcast]