Items where Author is "Penlington, Roger"

Up a level
Export as [feed] RSS
Group by: Item Type | No Grouping
Number of items: 71.

Article

Comodi, Gabriele, Cioccolanti, Luca, Mahkamov, Khamid, Penlington, Roger, Lapuerta, Magin, Hernandez, Juan José, Silva Lora, Electo Eduardo, Venturini, Osvaldo, Melian Cobas, Vladimir Rafael, Escobar Palacio, Jose Carlos, Mendonça Freires, Francisco Gaudêncio, Torres, Ednildo Andrade, da Silva, Julio Augusto Mendes, Kafarov, Viatcheslav, Chacon Velasco, Jorge Luis, Solano Martinez, Javier Enrique, Lizarazo Salcedo, Gladys Yolanda, Serna Suárez, Iván David, Jaen, Rene Lesme, Gonzalez, Josue Imbert, Fernandez, Maria, Garcia Faure, Luis Jerónimo, Oliva-Merencio, Deny, Reyes, Ileana Pereda, Salas, Joel Morales and Ramírez, Cesar Cisneros (2019) Analysis of labour market needs for engineers with enhanced knowledge in renewable energy in some European and Latin-American Countries. Energy Procedia, 158. pp. 1135-1140. ISSN 1876-6102

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2018) Experimental and numerical study of Buoyancy-driven low turbulence flow in rectangular enclosure partially filled with isolated solid blockages. International Journal of Heat and Mass Transfer, 127. pp. 534-545. ISSN 0017-9310

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2018) Zero-dimensional transient model of large-scale cooling ponds using well-mixed approach. Annals of Nuclear Energy, 114. pp. 342-353. ISSN 0306-4549

Misti, Nabilah, Birkett, Martin, Penlington, Roger and Bell, David (2017) Effect of Abrasive Machining on the Electrical Properties Cu86Mn12Ni2 Alloy Shunts. Materials, 10 (8). p. 876. ISSN 1996-1944

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2017) Effects of varying laser trimming geometries on thin film resistors. Circuit World, 43 (1). pp. 27-31. ISSN 0305-6120

Birkett, Martin and Penlington, Roger (2016) Electrical resistivity of CuAlMo thin films grown at room temperature by dc magnetron sputtering. Materials Research Express, 3 (7). 075021. ISSN 2053-1591

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2015) Effect of Emissivity on the Heat and Mass Transfer of Humid Air in a Cavity Filled with Solid Obstacles. Numerical Heat Transfer, Part A: Applications, 67 (5). pp. 531-546. ISSN 1040-7782

Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2015) Practical implementation of a concurrent trimming approach for manganin shunt resistors. International Journal of Computing, Communications & Instrumentation Engineering, 2 (2). pp. 81-85. ISSN 2349-1469

Alafogianni, Maria, Penlington, Roger and Birkett, Martin (2015) Resistor trimming geometry; past, present and future. IOP Conference Series: Materials Science and Engineering, 104. 012002. ISSN 1757-899X

Iyi, Draco, Hasan, Reaz, Penlington, Roger and Underwood, Chris (2014) Double Skin Façade: Modelling Technique and Influence of Venetian Blinds on the Airflow and Heat Transfer. Applied Thermal Engineering, 71 (1). pp. 219-229. ISSN 1359-4311

Birkett, Martin, Penlington, Roger, Wan, Chaoying and Zoppi, Guillaume (2013) Structural and electrical properties of CuAlMo thin films prepared by magnetron sputtering. Thin Solid Films, 540. pp. 235-241. ISSN 0040-6090

Birkett, Martin and Penlington, Roger (2013) Laser trim pattern modelling and optimisation for CuAlMo thin film resistors. IEEE Transactions on Components, Packaging and Manufacturing Technology, 3 (3). pp. 523-529.

Liyanage, Lalith, Strachan, Rebecca, Penlington, Roger and Casselden, Biddy (2013) Design of educational systems for work based learning (WBL): the learner experience. Higher Education, Skills and Work-based Learning, 3 (1). pp. 51-61. ISSN 2042-3896

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2013) Numerical simulation of 2D turbulent natural convection of humid air in a cavity filled with solid objects. Procedia Engineering, 56. pp. 538-543. ISSN 1877-7058

Birkett, Martin and Penlington, Roger (2012) Laser trimming of CuAlMo thin-film resistors: effect of laser processing parameters. Journal of Electronic Materials, 41 (8). pp. 2169-2177. ISSN 0361-5235

Strachan, Rebecca, Liyanage, Lalith, Casselden, Biddy and Penlington, Roger (2011) Effectiveness of technology to support work based learning: the stakeholders' perspective. Research in Learning Technology, 19 (1). pp. 134-144. ISSN 2156-7077

McDowell, Liz, Penlington, Roger and Tudor, Jenna (2010) Initial findings of a mixed methods investigation into students’ perceptions and approaches towards learning. Practice and Evidence of the Scholarship of Teaching and Learning in Higher Education, 5 (2). pp. 75-97. ISSN 1750-8428

Tudor, Jenna, Penlington, Roger and McDowell, Liz (2010) Perceptions and their influences on approaches to learning. Engineering Education: Journal of the Higher Education Academy Engineering Subject Centre, 5 (2). pp. 69-79. ISSN 1750-0052

Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2008) Electrical characterisation of AlCuMo thin films prepared by DC magnetron sputtering. IET Science, Measurement and Technology, 2 (5). pp. 304-309. ISSN 1751-8822

Ahmed, Mohamed Mostafa Ramadan, Putrus, Ghanim, Ran, Li and Penlington, Roger (2006) Development of a prototype solid-state fault-current limiting and interrupting device for low-voltage distribution networks. IEEE Transactions on Power Delivery, 21 (4). pp. 1997-2005. ISSN 0885-8977

Bauer, Thomas, Forbes, Ian, Pearsall, Nicola and Penlington, Roger (2005) Heat transfer modelling in thermophotovoltaic cavities using glass media. Solar Energy Materials and Solar Cells, 88 (3). pp. 257-268. ISSN 0927-0248

Bauer, Thomas, Forbes, Ian, Penlington, Roger and Pearsall, Nicola (2004) Heat Transfer Modelling of Glass Media within TPV Systems. AIP conference proceedings, 738. pp. 153-161. ISSN 0094-243X

Bauer, Thomas, Forbes, Ian, Penlington, Roger and Pearsall, Nicola (2003) The potential of thermophotovoltaic heat recovery for the glass industry. AIP conference proceedings, 653. pp. 101-110. ISSN 0094-243X

Gomaa, A., Underwood, Chris, Bond, T. J. and Penlington, Roger (2002) Experimental investigation of sensible heat transfer in fin-and-tube cooling coils. Building Services Engineering Research and Technology, 23 (3). pp. 197-204. ISSN 0143 6244

Penlington, Roger (2000) Surface engineering in the glass container industry. Vacuum, 56 (3). pp. 179-183. ISSN 0042-207X

Penlington, Roger (1998) Parison pressing and plunger contact during lightweight glass container forming. International Glass Journal, 98 (1). pp. 50-52. ISSN 1123-5063

Penlington, Roger, Sarwar, Mohammed and Lewis, D. (1995) Application of advanced coatings to narrow neck press and blow plungers in the glass container industry. Surface and Coatings Technology, 76-77 (1). pp. 81-85. ISSN 0257-8972

Book Section

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2017) An investigation into the effects of pattern geometries on laser trimmed film resistors. In: Proceedings of the 2016 International Conference for Students on Applied Engineering (ISCAE). IEEE, Piscataway, pp. 79-82. ISBN 978-1-4673-9053-8

Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2016) Experimental investigation into abrasive concurrent trimming for manganin shunt resistor. In: Proceedings of the 2nd International Conference on Advances in Mechanical Engineering Istanbul 2016. Yildiz Technical University, Istanbul, pp. 745-749. ISBN 9786056590719

Alafogianni, Maria, Birkett, Martin and Penlington, Roger (2015) A novel method of comparing laser trim pattern geometries of thin film resistors. In: Proceedings of the 13th International Conference on Manufacturing Research (ICMR). Bath University, UK, pp. 13-18. ISBN 1857901878

Misti, Siti Nabilah, Birkett, Martin, Bell, David and Penlington, Roger (2014) A new trimming approach for shunt resistors used in metering applications. In: Proceedings of the 2nd International Conference on Electronic Design (ICED), 2014. IEEE, Piscataway, NJ, pp. 94-99.

Amedu, Osaighe Kennedy, Penlington, Roger, Busawon, Krishna and Morgan, Andy (2013) A lumped parameter control model for twin-screw extruders. In: Systems and Control (ICSC), 2013 3rd International Conference on. IEEE, Piscataway, NJ, pp. 563-569. ISBN 978-1479902736

Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Assessment of professional competencies and mobility of engineers in Europe. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 978-1907632167

Perera, Noel and Penlington, Roger (2012) Supporting the attainment of professional attributes in a work based learning programme. In: Proceedings of the EE2012 : Innovation, Practice and Research in Engineering Education. Loughborough University, Loughborough, UK. ISBN 978-1907632167

Busawon, Abheesha, Penlington, Roger and Perera, Noel (2012) Engineering continuing professional development and mobility in the European green job market. In: Proceedings of the 2012 2nd International Symposium On Environment Friendly Energies And Applications. IEEE, Piscataway, NJ, pp. 224-229. ISBN 978-1467329095

Penlington, Roger and Campbell-Wonders, Martin (2006) Assessment for learning within engineering. In: Proceedings of the International Conference on Innovation, Good Practice and Research in Engineering Education 2006. Elsevier, London, pp. 255-259. ISBN 9781905788118

Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2006) Effects of annealing on the electrical properties of NiCr vs AlCu thin film resistors prepared by DC magnetron sputtering. In: Proceedings of the 20th Annual Passive Components Conference (CARTS 2006), Bad Homburg, Germany. ECA, Arlington, VA, USA, pp. 307-316. ISBN 978-0790801100

Ponugubati, Manoj, Penlington, Roger and Putrus, Ghanim (2004) Development of specifications for a thermal buffer device. In: Universities Power Engineering Conference, 2004. UPEC 2004. 39th International. IEEE, Piscataway, NJ, pp. 1171-1175. ISBN 1-86043-365-0

Conference or Workshop Item

Ramadan, Ahmed, Hasan, Reaz and Penlington, Roger (2015) Numerical simulation of flow and heat transfer around vertical cylinder submerged in water. In: UK Heat Transfer Conference, 7-8 September 2015, Edinburgh University.

Woods, Thomas, Cheung, Wai Ming, Hilton, Kevin and Penlington, Roger (2015) Environmental Impact Reduction for Small and Medium-sized Manufacturing Enterprises in New Product Development. In: SDM'2015, International Conference on Sustainable Design and Manufacturing, 12-14 April 2015, Seville, Spain.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2014) Effect of Blockages on Natural Convection Turbulent Airflow and Heat Transfer in a Cavity. In: CONV-14: International Symposium on Convective Heat and Mass Transfer, June 8 - 13, 2014, Kusadasi, Turkey.

Amedu, Osaighe Kennedy, Penlington, Roger, Busawon, Krishna and Morgan, Andy (2014) A novel modeling approach to the mixing process in twin-screw extruders. In: 29th International Conference of the Polymer-Processing-Society (PPS), 15th - 19th July 2013, Nuremberg.

Hooper, Helen, Tudor, Jenna, Manns, Helen and Penlington, Roger (2014) Have you heard about the HEAR? Evaluation of initial employer impact of the Higher Education Achievement Record. In: Annual Regional Learning and Teaching Conference 2014, 27 March 2013, Durham.

Penlington, Roger, Tudor, Jenna and Perera, Noel (2013) Staff and student perspectives on embedding sustainability into the engineering curriculum. In: Engineering Education for Sustainable Development Conference 2013, 22 - 25 September 2013, Cambridge.

Liyanage, Lalith, Strachan, Rebecca, Penlington, Roger and Casselden, Biddy (2013) New Pedagogical Models Facilitated by Technology. In: Sixth International Conference of MIT’s Learning International Networks Consortium (LINC), 16th - 19th June 2013, Cambridge, MA, USA.

Penlington, Roger, Tudor, Jenna, Joyce, Tom and Thompson, Jamie (2012) Do different learning contexts, processes and environment affect perceptions, dispositions and approaches to learning? In: EE2012: International Conference on Innovation, Practice and Research in Engineering Education, 18-20 September 2012, Coventry University, UK.

Liyanage, Lalith, Strachan, Rebecca, Penlington, Roger, Casselden, Biddy and Kapurubandara, Mahesha (2012) Can Sri Lanka adapt work-based learning? Insights from UK work-based learning cases. In: 30th National IT Conference (NITC 2012), 10-11 July 2012, Colombo, Sri Lanka.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2012) Interaction effects between surface radiation and double-diffusive turbulent natural convection in an enclosed cavity filled with solid obstacles. In: International Symposium on Advances in Computational Heat Transfer ICHMT, 1-6 July 2012, Bath, England.

Woods, Thomas, Cheung, Wai Ming, Penlington, Roger and Hilton, Kevin (2011) Long term sustainable product development at the packaging sector. In: 9th International Conference on Manufacturing Research, 6 - 8 September 2011, Glasgow Caledonian University.

Strachan, Rebecca, Casselden, Biddy, Liyanage, Lalith and Penlington, Roger (2011) Effectiveness of design of online learning programs for work-based learning from the point of view of stakeholders. In: Design, Development and Research Conference, 26 - 27 September 2011, Cape Town, South Africa.

Penlington, Roger, Clark, Robin, Tudor, Jenna, Willmot, Peter, Willis, Liz and Clifford, Mike (2011) Engineering Education Research - the UK perspective at a time of change. In: SEFI Annual Conference 2011: Global Engineering Recognition, Sustainability and Mobility, 28-30 September 2011, Lisbon, Portugal.

Strachan, Rebecca, Liyanage, Lalith, Casselden, Biddy and Penlington, Roger (2011) Engaging learning: bringing the stakeholders' perspective to work based online learning. In: Association for Learning Development in Higher Education (ALDinHE) Annual Conference, 18 - 20 April 2011, Belfast, Northern Ireland.

Iyi, Draco, Hasan, Reaz and Penlington, Roger (2011) Numerical analysis of the influence of thermal boundary condition and surface emissivity on the flow and heat transfer in turbulent buoyancy driven flow. In: The Asian Symposium of Computational Heat Transfer and Fluid Flow, 22-26 September 2011, Kyoto University, Kyoto, Japan.

Strachan, Rebecca, Liyanage, Lalith, Casselden, Biddy and Penlington, Roger (2011) The added dimensions of multiple stakeholders in delivering learning. In: Community and Employer Engagement Conference on WBL, 28 - 29 June 2011, University of Wales Institute Cardiff (UWIC), Wales.

Steiner, Simon and Penlington, Roger (2010) Approaches to the embedding of sustainability into the engineering curriculum - where are we now, and how do our graduates become global engineers? In: Engineering Education 2010, 6-10 July 2010, Aston University, Birmingham.

Tudor, Jenna, Penlington, Roger and McDowell, Liz (2010) Perceptions and their influences on approaches to learning. In: Engineering Education 2010, 6-8 July 2010, Aston University.

Penlington, Roger and Tudor, Jenna (2009) Dual use of feedback – formative and evaluative. In: SEFI 2009: 37th Annual Conference, 1-4 July 2009, Rotterdam, The Netherlands.

Graham, Linda and Penlington, Roger (2008) Assessment for learning workshop. In: Assessment for learning workshop, November 2008, Manchester.

Montgomery, Catherine, Penlington, Roger, Tan, John and McDowell, Liz (2008) Becoming and being an engineer in an internationalised context : international students' engagement with 'real world' enquiry at Masters' level. In: HEA Annual Conference 2008: Transforming the Student Experience, 1st - 3rd July 2008, Harrogate, UK.

McDowell, Liz, Tan, John, Penlington, Roger and Montgomery, Catherine (2008) Becoming and being an engineer in an internationalised context : international students' construction of their experiences in higher education. In: Transforming the Student Experience : Higher Education Academy 4th Annual Conference, 1-3 July 2008, Harrogate.

Birkett, Martin, Brooker, Jason, Penlington, Roger, Wilson, Alasdair and Tan, Kian (2007) Electrical characterisation of AlCuMo thin films prepared by DC magnetron sputtering. In: ICMCTF 2007: 34th International Conference on Metallurgical Coatings and Thin Films, 23-27 April, 2007, San Diego, USA.

Penlington, Roger (2007) Keep your students in the dark - Don't let assessment suppress creativity. In: 9th International Conference on Engineering and Product Design Education, 13-14 September 2007, Newcastle-upon-Tyne.

McDowell, Liz, Gibson, Mel, Penlington, Roger, Robinson, Jon, Sambell, Kay and Smailes, Joanne (2006) Putting assessment for learning into practice. In: Higher Education Academy Annual Conference, 3 July - 5 July 2006, Nottingham.

McDowell, Liz, Wakelin, Delia and Penlington, Roger (2005) Assessment for learning – some practical and effective approaches. In: Assessment for learning – some practical and effective approaches, 11 November 2005, Newcastle University.

Tarikere, S.K., Hasan, Reaz, Penlington, Roger and Underwood, Chris (2005) Numerical prediction of flow and pollutant dispersal in an urban street canyon. In: 4th International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics, 19-22 September 2005, Cairo, Egypt.

Bauer, Thomas, Forbes, Ian, Penlington, Roger and Pearsall, Nicola (2004) An assessment of potential thermophotovoltaic applications in the UK. In: 19th European photovoltaic solar energy conference, 7-11 June 2004, Paris.

Book

Penlington, Roger and Andrews, Jane (2018) The First Spring Colloquium of the United Kingdom & Ireland Engineering Education Research Network. Northumbria University, Online. ISBN 9781861354792

Andrews, Jane, Clark, Robin, Nortcliffe, Anne and Penlington, Roger (2018) 5th Annual Symposium of the United Kingdom & Ireland Engineering Education Research Network: Time for change. Aston University, Birmingham. ISBN 978 1 85449 443 6

Penlington, Roger and Steiner, Simon (2014) An Introduction to Sustainable Development in the Engineering Curriculum. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK. ISBN 978-1-904804-22-8

Penlington, Roger and Steiner, Simon (2010) An introduction to sustainable development in the Engineering curriculum. Higher Education Academy, York. ISBN 9781904804970

Other

Penlington, Roger and Steiner, Simon (2014) Sustainable Development in the Engineering Curriculum: Teaching and Learning Resources. Centre for Engineering and Design Education, Loughborough University, Loughborough, UK.

This list was generated on Thu May 23 17:25:49 2019 UTC.

Policies: NRL Policies | NRL University Deposit Policy | NRL Deposit Licence